[Q] Galaxy Note hangs at flashing hidden.img - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi my note was stuck at Samsung screen, so I flashed with stock 4.0.4 firmware (Australia & Optus) and now in Odin in constantly hangs at the hidden.img part..
Is the phone screwed, I've heard the emmc block is damaged now? Is there is fix for this?
Thanks in advance!

Are you able to enter download mode now
Try flashing a stock gb rom

rajsekhar.300 said:
Are you able to enter download mode now
Try flashing a stock gb rom
Click to expand...
Click to collapse
Thanks for the response! Yes can enter download mode holding the power, volume and home buttons. I've tried stock Australian roms and stock Hong Kong roms as I'm not sure whether its a AU model or HK model.. They're 4.0.4, I'm not sure what you mean by GB? Do you mean ginger bread actually and I should try download a rom that isn't 4.x.x??
Thanks for your time..

Yes i mean gingerbread(2.3.6)
Try flashing a stock gingerbread(2.3.6) rom

rajsekhar.300 said:
Yes i mean gingerbread(2.3.6)
Try flashing a stock gingerbread(2.3.6) rom
Click to expand...
Click to collapse
thanks I tried that with a HK 2.3.6 rom and same issue, tried heaps of 2.3.6 roms, all same issue hangs at hidden.img
guess something screwed bigtime and out of my capabilities thanks anyways mate!

8evre1 said:
thanks I tried that with a HK 2.3.6 rom and same issue, tried heaps of 2.3.6 roms, all same issue hangs at hidden.img
guess something screwed bigtime and out of my capabilities thanks anyways mate!
Click to expand...
Click to collapse
after one installation is stuck.. b4 installing other rom... u need to reboot the phone and try again in download mode.. if u continue from the same plc where its stuck,, it will never progress

Did you try take your battery out a min and put it back again and flash the rom again.
Sent from my GT-N7000 using xda premium

Be careful, you might have one of your partition broken...
My friend had this before, and he finally succeeded to flash N7000DXLR5 firmware from http://forum.xda-developers.com/showthread.php?t=1424997
But then he checked his storage capacity was reduced to 7GB...
Do you have a warranty? If you've got some binary counter or yellow triangle, it is better to remove it first using a jig
Then go to the nearest Samsung Service Center, hopefully you'll get a replacement...

hm... definitely I'm sure one of his file partition is already corrupted...
@OP, you may need to check the thread on the PIT file method to revive your Note(http://forum.xda-developers.com/showthread.php?t=1667886)... perhaps you might have the dreaded bug already...

Related

SGS Back to life using a jig.. now what?

I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!

[Q] Stuck on Samsung Logo :S:S

hey guys
yesterday my phone works normally .. but the charge is ended and the phone is closed .. then i plug the usb cable to charge it again .. but when the phone get 50 % battery i remove usb cable .. and when i try to open it .. it's stuck on samsung logo :S ...
* im using Stock rom " LPF " flashing with(( PIT + PDA + CSC + BOOTLOADER + PHONE ..)
now if i flash rom have 1 file .. the phone works ? or should full stock rom ?
any answer plz :\
im using Franco kernel v5 .
can you get into download mode power volume down and home key
try to remove battery for 5 mins, pull back and try to turn on, maybe your battery was killed
yes i can go into download mode ..
-
EdgaBimbam said:
try to remove battery for 5 mins, pull back and try to turn on, maybe your battery was killed
Click to expand...
Click to collapse
no battery works fine .. i try that also .. but still stuck on samsung logo
ok if you can get into download mode i would try flashing a gb rom with pc odin nad hope that you do not have a brick from the lpy
NOORHASHIM said:
no battery works fine .. i try that also .. but still stuck on samsung logo
Click to expand...
Click to collapse
atleast you stuck at samsung logo, go to download mode and flash gb firmware
but im using LPF Full file !! and the bootloader is change !
so now can i flash stock ICS UK over than Stock LPF Stock full file ?
it does not matter about the boot loader if i were you i would flash a gb rom first then flash stock uk lpq this is for safety reasons
anubis1126 said:
it does not matter about the boot loader if i were you i would flash a gb rom first then flash stock uk lpq this is for safety reasons
Click to expand...
Click to collapse
ok stock gb i using pit file ?
but my file will gone xS ...
no need to use another pit file just flash the gb rom then the lpq
as long as you can the phone working again that is the main thing
anubis1126 said:
no need to use another pit file just flash the gb rom then the lpq
as long as you can the phone working again that is the main thing
Click to expand...
Click to collapse
but i saw some post say .. if you change from ICS To Gb .. the phone will brick ..
now im flashing UK ICS ROM .. when done the phone works fine ? or should i re-flash LPF Full Stock rom With pit and bootloader ..... to work fine ? because i think my soft is got super bricks :S ..
i flash UK Rom LPQ .. then wipe data / cache .. and that's works
but i wanna to back to ginger bread ? how to back because the bootloader is change
i used mobile odin to upgrade to isc but then people were bricking there phones with the uk ics so i usef mobile odin to downgrad to gb
just use pc odin to downgrade to gb thats what i do though at the moment i am on uk lpq
i will get super bricks if i flashing stock GB over than LPF Taiwan because the bootloader is changeeee :S
NOORHASHIM said:
i will get super bricks if i flashing stock GB over than LPF Taiwan because the bootloader is changeeee :S
Click to expand...
Click to collapse
Flash Gingerbread KKA rom.
I guess it comes with boot-loaders.
There are param.lfs, sbl.bin files in ir.

can access CWM but stuck at Samsung galaxy logo

Really need the expert here to help me out.
I restored my phone to rooted ICS stocked Rom, but get stuck in the samsung logo.
I have tried to flash the phone with the ICS stock Rom by odin but stuck at factoryfs.img, then I try to flash the phone with pre-rooted GB but stuck at the NAND Write Start.
any help is much appreciated !!
eecmp said:
Really need the expert here to help me out.
I restored my phone to rooted ICS stocked Rom, but get stuck in the samsung logo.
I have tried to flash the phone with the ICS stock Rom by odin but stuck at factoryfs.img, then I try to flash the phone with pre-rooted GB but stuck at the NAND Write Start.
any help is much appreciated !!
Click to expand...
Click to collapse
Sorry, but this seems to be the brick bug. So you didn't read and followe the warnings in all the stickies, right?
So maybe a good point for starting to read about brick bug here (this isn't meant sarcastic).
Easy help or solution isn't possible. You could try with your Samsung warranty.
Have you ever wiped on stock ICS ?
eecmp said:
Really need the expert here to help me out.
I restored my phone to rooted ICS stocked Rom, but get stuck in the samsung logo.
I have tried to flash the phone with the ICS stock Rom by odin but stuck at factoryfs.img, then I try to flash the phone with pre-rooted GB but stuck at the NAND Write Start.
any help is much appreciated !!
Click to expand...
Click to collapse
If u ever made a nandroid backup and on a safe kernel.. try restore ..... it worked for me....
dr.ketan said:
Have you ever wiped on stock ICS ?
Click to expand...
Click to collapse
No, I didn't wiped anything on stock ICS.
What I did before is to is to use CWM.zip to root the stock ICS and then flash to Criskelo ICS ROM
it went very well and I don't find any problem.
before after using CWM.zip to flash a different kernel (speedmod), it stuck at the logo screen.
please help me Dr. ketan
restoring usrtnda
nokiamodeln91 said:
If u ever made a nandroid backup and on a safe kernel.. try restore ..... it worked for me....
Click to expand...
Click to collapse
I can restored to my backup , which is right after i root the stock ICS rom by using CWM.zip
But it just stuck at the logo screen after restoration
any idea ? thanks
ThaiDai said:
Sorry, but this seems to be the brick bug. So you didn't read and followe the warnings in all the stickies, right?
So maybe a good point for starting to read about brick bug here (this isn't meant sarcastic).
Easy help or solution isn't possible. You could try with your Samsung warranty.
Click to expand...
Click to collapse
Yes, you're right, I'm such a idiot
and I don't have the samsung warranty ~:crying:
eecmp said:
Yes, you're right, I'm such a idiot
and I don't have the samsung warranty ~:crying:
Click to expand...
Click to collapse
It seems u were using a temp CWM.zip to do all these... hmmm... donot use it..
what kernel are u using... ??? install speedmod and go to CWM and try a wipe... u mite get a yellow triangle.. but then use triangle away later
nokiamodeln91 said:
It seems u were using a temp CWM.zip to do all these... hmmm... donot use it..
what kernel are u using... ??? install speedmod and go to CWM and try a wipe... u mite get a yellow triangle.. but then use triangle away later
Click to expand...
Click to collapse
Yes , I learnt the lesson of not using the temp CWM.zip.
after I restored my phone, it should be in the default stock kernel .
Are you suggesting I use Odin to install a "safe" kernel , for example , "SpeedMod K3-13 for Odin" and try a wipe?
eecmp said:
Yes , I learnt the lesson of not using the temp CWM.zip.
after I restored my phone, it should be in the default stock kernel .
Are you suggesting I use Odin to install a "safe" kernel , for example , "SpeedMod K3-13 for Odin" and try a wipe?
Click to expand...
Click to collapse
Yes... u can use PC odin and the tar file of speedmod in PDA to change the kernel... moreover when u install the speedmod u get CWM automatically
PS: not a 100% guarantee of success
nokiamodeln91 said:
Yes... u can use PC odin and the tar file of speedmod in PDA to change the kernel... moreover when u install the speedmod u get CWM automatically
PS: not a 100% guarantee of success
Click to expand...
Click to collapse
thanks for the instructions, let me try it and cross my fiingers ~
eecmp said:
thanks for the instructions, let me try it and cross my fiingers ~
Click to expand...
Click to collapse
it stuck at "Formating /data" :crying:
U mean to say the kernel isn't flashing successfully
nokiamodeln91 said:
U mean to say the kernel isn't flashing successfully
Click to expand...
Click to collapse
no, the kernel flash successfully with the triangle, then i try wipe , it stuck at "Formating /data"
what should I do now ?
Really running out of options.... But either try a nand backup now or flash a pre rooted gb rom from Dr ketans post....
nokiamodeln91 said:
Really running out of options.... But either try a nand backup now or flash a pre rooted gb rom from Dr ketans post....
Click to expand...
Click to collapse
should I try this one using the pit ? thanks
http://forum.xda-developers.com/showthread.php?t=1667886
eecmp said:
should I try this one using the pit ? thanks
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
I think this one is when you are sure shot brick, may be you should first try flashing rooted GB rom using odin and if that too didn't work, try the method in your link. You can find rooted GB in my sig.
eecmp said:
should I try this one using the pit ? thanks
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
Ya as jeetu said,, just try a GB rom for now...
jeetu1981 said:
I think this one is when you are sure shot brick, may be you should first try flashing rooted GB rom using odin and if that too didn't work, try the method in your link. You can find rooted GB in my sig.
Click to expand...
Click to collapse
Finally , PIT method as mention in the link works !!!
I got the rooted GB in my Note back in life now ! although I lost 5 GB after pit. it's better than a expensive paperweight before !
by the way, is there any way to restore the data that I have backup in stock ICS without bricks the note again ?
thanks
eecmp said:
Finally , PIT method as mention in the link works !!!
I got the rooted GB in my Note back in life now ! although I lost 5 GB after pit. it's better than a expensive paperweight before !
by the way, is there any way to restore the data that I have backup in stock ICS without bricks the note again ?
thanks
Click to expand...
Click to collapse
Great!! how did you backup? If it is nandroid then do not try to restore on GB and if TB or any other app then you can restore one by one, except system apps.

[SOLVED] [Q] Galaxy Note won't flash original firmware

Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
BIGGEST EDIT:
All of the methods in this thread are NOT WORKING. Still stops at factoryfs and CWM says "Installation Aborted". SO, WHAT I CAN DO? He is desperated, I'm desperated. PLEASE ANSWER FAST !!
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
Click to expand...
Click to collapse
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
msedek said:
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
Click to expand...
Click to collapse
He is able to enter into DL mode. Even PIT doesn't work.
Mr.Indigo said:
He is able to enter into DL mode. Even PIT doesn't work.
Click to expand...
Click to collapse
Well then your only option its the warranty or pay samsung either for a new phone or a mother board replacement...
That pit file method its only a partial solution to help you get your device partially working maybe a couple of months.. When the emmc bug happens it does damage the Emmc chip so the hardware its fried and there's no software that can repair it..
The pit method could work for someone but not for others.. Depends on the damage
Tapatalking on my n7000
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried it, but didn't work. This solution is too much dangerous?
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
It's doesn't matter if it's 1 or 3 files.. The pit file just repartition the emmc in order to reacomodate the memory and so you can flash the rom.. Flashing separately phone csc and PDA won't make any difference..
Tapatalking on my n7000
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
Click to expand...
Click to collapse
I have the same problem!!!
I'm desperated, since it's my main phone!
I will try the last solutions!!!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
That's what I need.... I didn't found the 3 files. I will try!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Aldenucci said:
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Click to expand...
Click to collapse
IDK, you must do it at your own risk.
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Mr.Indigo said:
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Click to expand...
Click to collapse
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
msedek said:
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
Click to expand...
Click to collapse
He didn't have warranty. I'm trying to flash any PIT which owns factoryfs. He said that fails to wipe into some minutes and I have 88 factoryfs PITs. So I have to flash ALL of them to know. BTW I can flash a kernel using ODIN!
mistajoe83 said:
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
Click to expand...
Click to collapse
My problem is SOLVED!
I found 88 PITs, whick it was intended for factoryfs. I tried the first ten PITs, and the 7th WORKED!
It was 17xx MB. Now the phone is working! THANKS FOR ALL OF YOUR GUYS HELP!

[Q] my phone has emmc bug but all of method doesnt work on it!!!

hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
king-heart said:
hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
Click to expand...
Click to collapse
Should try this http://forum.xda-developers.com/showthread.php?t=1667886
You'll have to identify the bad partition and then manualy rebuild the partition table with ADB.
You'll lose up to 3gb of space and stock roms will probably not work anymore without fc's. Cm based roms usually work best after emmc brick revival.
Sent from my GT-N7000 using xda premium
i tried all but doesnt work
SpyderTracks said:
You'll lose up to 3gb of space and stock roms will probably not work anymore without fc's. Cm based roms usually work best after emmc brick revival.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
yes i know that but the problem is this i use all of this method but i cant revival my phone cuz i cant access to recovery and when i turn on my phone i infront with a message that show a triangle between a pc and a phone and says use kiess. i use pit method without accesing to recovery cuz of this i flash all of pit files one by one but doesn't get any way to revival my phone.
screenshot of my phone
lionelia said:
Should try this http://forum.xda-developers.com/showthread.php?t=1667886
You'll have to identify the bad partition and then manualy rebuild the partition table with ADB.
Click to expand...
Click to collapse
i attached screenshot of my phone . i couldnt access to recovery .
After flashing pit file did you try and flash a kernel like Phillz?
Sent from my GT-N7000 using xda premium
pit files couldnt set
SpyderTracks said:
After flashing pit file did you try and flash a kernel like Phillz?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thanks . actually not . cuz none of pit file couldnt set on my partition and stuck in odin.can i flash this kernel without flash pit?
new problem
now i have a bigger probem .my battery is out of charge and when i plug in phone to adapter it start bootllop and i cant enter in download mode cuz of low battery
help me plz
help me for 1 month im working on my phone :silly::silly::silly::crying::crying::crying:
Remove the battery. Put back. Then plug the charger and let the phone charge for a couple of hours before you boot into download mode again?
Buy an external battery charger. They are very cheap
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
My phone was bricked.
And I use hg42 revival method.
Simply go into download mode.
Use odin pc to flash stock rom (gingerbread preferred).
And....
Choose the pit from hg42, tick repartition.
Flash.
Voila. It is up alrd with a lost of 3gb. But I didn't care since I have ext sd.
PS:
It will be good if u know how to identify the bad block first. So u can choose the correct pit file to do repartition of ur device.
And.... u better charge ur battery first, no matter how r u goin to do it. I m sure u don't want to get worst while flash with odin pc, and ur battery dead.
^_^
Sent from N7105, at the corner of this rounded earth.
king-heart said:
hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
Click to expand...
Click to collapse
Check md5 sum of downloaded file...
I think it's the download of the file.
than try this-http://forum.xda-developers.com/showthread.php?t=1667886
After that try to flash PhilZ kernel (look for .tar file in Philz thread and flash via ODIN-i don't preffer ODIN but since u got nothing else u have to flash via ODIN PhilZ kernel) and some custom TW JB ROM from CWM that comes with PhilZ kernel.
So everything should be working or?
nokiamodeln91 said:
Remove the battery. Put back. Then plug the charger and let the phone charge for a couple of hours before you boot into download mode again?
Click to expand...
Click to collapse
Thank u i solve battery problem by changing with my friends but other problem . I couldnt install recovery to solve with pit fils
king-heart said:
Thank u i solve battery problem by changing with my friends but other problem . I couldnt install recovery to solve with pit fils
Click to expand...
Click to collapse
You just need download mode to flash pit file. Then once complete flash Phillz kernel.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
You just need download mode to flash pit file. Then once complete flash Phillz kernel.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I flash all of patched pit file but doesnt work i flash more than 100 pit file.
king-heart said:
I flash all of patched pit file but doesnt work i flash more than 100 pit file.
Click to expand...
Click to collapse
You have to do it manualy with your brain and your hands.
With ADB you can check each partitions to find the one faultly and then create new one.
you will loose space on mass storage (UMS partition) but your phone will work.
So are you still on stock recovery? After flashing PIT you need to format emmc, data, cache and system before flashing new ROM with Odin. You need custom kernel for that.
Also, did you do factory reset with CWM.zip before you bricked?
Sent from my GT-N7000 using xda app-developers app
Ah!why are people using odin when flashing from phone is so easy???!!!i did not use odin.now i have philz kernel and ultimate jb rom v5.1
And i also live in iran!
Sent from my GT-N7000 using xda premium
sepehrthegreat-iran said:
Ah!why are people using odin when flashing from phone is so easy???!!!i did not use odin.now i have philz kernel and ultimate jb rom v5.1
And i also live in iran!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
its because he has bricked the phone and no access to recovery currently. also Odin (PC/Mobile) is the only way to get back a stock official rom

Categories

Resources