Related
I just loaded my AT&T version with cyanogen 5.0.5.3, and the wireless tether app does not work.
No matter the security settings I use, it always shows unsecure network on my laptop (OSX, Ubuntu and Vista).. If I set it to unsecure in the app, it still does not connect.
I have never used it before, but I am assuming the cyanogenmod kernel has the required bits for the app to work properly.
Am I missing something stupid?
Thanks
-G
ghost_o said:
I just loaded my AT&T version with cyanogen 5.0.5.3, and the wireless tether app does not work.
No matter the security settings I use, it always shows unsecure network on my laptop (OSX, Ubuntu and Vista).. If I set it to unsecure in the app, it still does not connect.
I have never used it before, but I am assuming the cyanogenmod kernel has the required bits for the app to work properly.
Am I missing something stupid?
Thanks
-G
Click to expand...
Click to collapse
Did you turn off USB tethering?
hotweiss said:
Did you turn off USB tethering?
Click to expand...
Click to collapse
Never turned it on, and verified it is off...
how did you load the apk?
lpasq said:
how did you load the apk?
Click to expand...
Click to collapse
Downloaded to SD, and installed from browser download screen...
ghost_o said:
Downloaded to SD, and installed from browser download screen...
Click to expand...
Click to collapse
you may want to adb push method or adb install -r method instead. reboot after install. or try my rom linked in signature.
if you don't know how to use sdk's adb, do a search here on xda for one of the many basic tutorials or ask for details.
lpasq said:
you may want to adb push method or adb install -r method instead. reboot after install. or try my rom linked in signature.
if you don't know how to use sdk's adb, do a search here on xda for one of the many basic tutorials or ask for details.
Click to expand...
Click to collapse
Will do adb.. I have the linux sdk..
Thanks, will post back with results..
OK, installing with adb has the same effect.
There are posts from the google code pages where this has happened in the past (last year though), so I doubt related..
Out of ideas...!
eth0 IEEE 802.11-DS ESSID:"AndroidTether" Nickname:""
Mode:Ad-Hoc Frequency:2.437 GHz Cell: 3A:4E:3D:88:EC:41
Bit Rate=72 Mb/s Tx-Power:32 dBm
Retry min limit:7 RTS thrff Fragment thrff
Encryption keyff
Power Managementmode:All packets received
Link Quality=5/5 Signal level=-57 dBm Noise level=-57 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
This is with WEP set.. It must have something to do with wpa_supplicant somewhere.. I'll keep digging...
maybe it might have something to do with atnt not able to do it throught there network. like us tmobile users can use data while on the phone? dont know alot but that could be a possibility
Nah, wpa_supplicant is not negotiating wep for some reason. I just replace the wpa_supplicant.conf file with a very generic open key WEP config and it still does not work..
I need to dig through my broadcom nda's and find this chip, and see if I can use the firmware.. I'll just load it up in AP mode and run hostapd and be done with it....
Ad-Hoc just plain sucks, almost as much as wep...
Cant find find wireless apk anywhere can someone please give me link
ttieder said:
Cant find find wireless apk anywhere can someone please give me link
Click to expand...
Click to collapse
http://lmgtfy.com/?q=android-wifi-tether&l=1
deprecate said:
http://lmgtfy.com/?q=android-wifi-tether&l=1
Click to expand...
Click to collapse
lmgtfy.com - that was awesome - my family members are gonna feel like idiots asking me questions now!
I had not heard of that site before.
Regarding wep-encryption & CM 5.0.5.x:
http://code.google.com/p/android-wifi-tether/issues/detail?id=292
So, wep-encryption is broken (no idea why) on the latest cyanogenmod-build. Please use CM 5.0.4.1 - it works flawlessly there.
I will take a closer look the next days ... but it's hard to tell what is causing this - I don't know which changes were made on CM.
By the way ... why was this topic moved to Q&A
This is definitely an issue which needs to be solved and should stay in development!
Thanks - I googled for quite a while, and never came across that info. Tethering is not that critical (unless I am travelling), so I will just wait for a fix sometime.
I would have figured other in this forum would have hit it though?!?!?
-G
I've installed 5.0.5.3 and downgraded the kernel which came with 5.0.4.1 - and it start working again! So, I would say that this issue is related to the latest kernel (2.6.33.1)!
I've created an issue on cyanogemod:
http://code.google.com/p/cyanogenmod/issues/detail?id=1217
i have wifi tether pre 8 on latest CM mod and its working great, wep works, and no errors in log.
I am having the same problem. I have both a nexus one and motor milestone. Tethering on milestone doesn't have problems but my nexus can't seem to connect as well no Sep security. I can see the my SSID, anyone can help?
There are obviously factors that differ between devices somehow. I too can change kernels and the issue goes away. Something is "missing" somewhere. A git pulled vanilla 2.6.33 kernel works just fine when booting the zimage from fastboot..
I have not looked at the cyanogen .config or wireless module source yet to see any modifications that would effect it...
I'm more interested in the module working in AP mode now that the driver supports it, and have been working on that...
-G
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
SG_Shadow said:
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
Click to expand...
Click to collapse
plug your phone in
get working drivers
install linux, it works better
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problem
Click to expand...
Click to collapse
[*]plug your phone in
[*]get working drivers
[*]install linux, it works better
Click to expand...
Click to collapse
u forgot a step.
[*]post in the correct forum
Firerat said:
plug your phone in
get working drivers
install linux, it works better
Click to expand...
Click to collapse
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Daneshm90 said:
u forgot a step.
[*]post in the correct forum
Click to expand...
Click to collapse
Fail!
SG_Shadow said:
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Fail!
Click to expand...
Click to collapse
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
This IS in the wrong forum.
Moved.
Firerat said:
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
Click to expand...
Click to collapse
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
SG_Shadow said:
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
Click to expand...
Click to collapse
you posted a couple of hours ago, duplicating posts might be considered spam
you didn't really give any useful information in your post(s)
and if I were to assume your were, then this is just some boring role play thing at a job interview or something, as you wouldn't really need anyones help on this.
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
ivanmmj said:
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
Click to expand...
Click to collapse
Thank you for trying to "actually" assist me. I am using the exact same usb cable on purpose to rule that out as a reason. I've also recently update both computers to the latest norton antivirus. Like I stated the drivers install on the laptop and I'm able to connect the G1 for file transfers, so I assume the driver is working but when I type in adb device or adb shell in cmd, I get the no device msg. I'm really stumped with this one...
*Update* My norton did remove adb.exe from windows\system32 on both computers, but I was able to restore that file on both. Like I said, my pc works just fine, laptop no good...
And point 3
Install linux ( ubuntu 10.4 )
Just give it 10gb
It will eliminate hardware faults as being the problem
The android developer has a tutorial for 10.4, so it should be easy
( no need for drivers, aparently 10.4 ships with the android udev rule )
the driver for file transfer isnt the same as the driver for adb....so your logic is flawed
seriously tho, use linux...wubi is pretty good now and u only need 4-10gb if u are only using it for android stuff
in my experience, windows, especially where norton is used, randomly breaks adb
The file transfer is done using the standard windows mass storage driver, not an android specific driver. Even if it's the same norton, try disabling it and see what happens. Also, trying removing the driver completely and reinstalling it again. I've had the issue happen also only when in windows and it's always something random.
virtualbox _should_ ( I think ) let you 'see' the Android Phone regardless of the drivers being installed on the Windows host
But, I have not tested that
Did you ever get this to work, I have the same issue?
I'm having the same issue, I'm trying to use ADB with my TF300T from a Windows 7 64 bit system. Always get the error adb error.
I have a couple of questions will this work correctly with a 64bit O.S?
Also the part of the instructions that reference SDCARD are they talking about the directory on my ASUS /sdcard/ or are they talking about the physical card?
Just need to know does it require you to have a sdcard in the ASUS to use adb?
May sound like fundamental questions to a lot of you, however I have combed through these forums as well as others all over the web, and the majority of instructions seem to be lacking the basics.
Thank you,
I have Ubuntu at work should I run ADB through this?
I have Ubuntu at work
It's a bit of a process according to the instructions that I have on the
screen right now to setup ADB through this, is there any gotchas that I should
know about before attempting this?
This is running on a VM on one of my servers. What I'm looking for is any known compatibility issues with versions of ADB and the Asus TF300T running .26
Thanks in advance.
Nordis
When I type in any adb commands on my computer, I'm suddenly getting a "bus error". It works fine on my PC at home but not on my work computer. Could I have possibly deleted a file that is needed for adb? Does anyone have a way to fix this?
I'm on a MAC and have the same exact problem. I've tried ADB on two home computers with no luck. Although, my problem is on a MAC I'm hoping someone can provide some help to better direct my search for an answer
srkmagnus said:
I'm on a MAC and have the same exact problem. I've tried ADB on two home computers with no luck. Although, my problem is on a MAC I'm hoping someone can provide some help to better direct my search for an answer
Click to expand...
Click to collapse
My problem is on a Mac as well. It worked fine on this Mac until just the other day. When I get on a PC things still work fine.
Nobody has an idea?
I pulled the crash report and can't make much of it. A friend of mine suggested I backup the computer then re-install the OS to see if that fixes it, considering the error never existed until recently. I'm at a lost and have been very frustarted. It occurs on two computers (Macbook and an iMac) and differenct User accounts.
Staunty, My problem has been resolved. I am on Mac 10.4 (Tiger) and the newest SDK packages don't support it. If you are on Tiger and downloaded the most recent SDK then I'd suggest downloading an archived one from here:
http://developer.android.com/sdk/older_releases.html
Sorry if I post in this old topic but i have a problem!
Im on tiger and i have downloaded the sdk 1.6r1 in your link to avoid the bus error problem, but i discovered that in this version there isn't the command "adb connect" to use adb wireless!
I've done some search but i haven't found a more recent version for tiger... can you help me?
Which app did you try? Give this one a try and be sure to enter the command with the given IP.
ADB Wireless (Widget)
The problem isn't the app but the sdk version! In 1.6 there isn't the command "adb connect" so i can't connect the phone with my mac.
In the version that i had used before update to the last relase (that doesn't support tiger), this command was present, but i can't found it!
Sent from my HTC Magic using XDA App
Did you try older SDK releases other than the 1.6r1?
http://developer.android.com/sdk/older_releases.html
there are several older version further down the page.
I will try...
Sent from my HTC Magic using XDA App
The title says it all
If everyone knows it, please tell me!
Thanks in advance
WingZero
I'll reply myself.
In a CM7 ROM It's enough to open "terminal emulator" and type:
su
bdaddr [new bluetooth address] && hciconfig hci0 reset
Click to expand...
Click to collapse
and it worked.
Follow up on altering the BT mac address
I'm in a situation where I have two Arias both on CM7.2 now, checked and they have the same BT mac address. I'm trying to pair them to a Panasonic home phone that can connect via BT to the cell. It will take one or the other but not both. I think if I change the mac on one of them I'll be in good shape.
Did it matter what you changed it to? Did you roll back to the stock ROM and see what that was to make it correct for your device or just pick something random? Thanks!
Edit: I followed the steps but it didn't keep my new address when I reset the phone. Any thoughts?
Could someone compile the following file for me? I'd do it myself, but, unfortunately, I don't have access to a computer, nor will I for a while (I'm touchpad only for now).
https://github.com/CyanogenMod/hp-kernel-tenderloin/blob/gingerbread/drivers/net/usb/mcs7830.c
The driver is for a USB-Ethernet adapter that I'm trying to get working on the Touchpad through ICS (cm9).
Thanks.
Is this for USB 3g dongles??
No, not for a 3G adapter, but for one that goes from USB to Ethernet cable.
jcsullins compiled it for me, by the way, so I no longer need the driver (many thanks to him).
However, I can confirm that ICS on CM9 recognized it without problems as eth0 and once I ran dhcpd and assigned a DNS server, I had no problems connecting to the internet. So feel free to add a driver for your own adapter if you have one.
So to review:
-copy driver (to /system/lib/modules)
-insert module ("insmod /system/lib/modules/*yourdriver*.ko")
-get an IP address (manually, or "/system/bin/dhcpd eth0")
-add DNS (setprop net.dns1 *yourDNSserver*)
A couple caveats, I've noticed.
1) It doesn't play nice with wifi. I sort of expected this, but bringing up wlan0 and eth0 at the same time crashes the tablet.
2) Not all apps recognize the internet connection. This is a bit frustrating since most do (including the Browser), but not all.
potissimus said:
No, not for a 3G adapter, but for one that goes from USB to Ethernet cable.
jcsullins compiled it for me, by the way, so I no longer need the driver (many thanks to him).
However, I can confirm that ICS on CM9 recognized it without problems as eth0 and once I ran dhcpd and assigned a DNS server, I had no problems connecting to the internet. So feel free to add a driver for your own adapter if you have one.
So to review:
-copy driver (to /system/lib/modules)
-insert module ("insmod /system/lib/modules/*yourdriver*.ko")
-get an IP address (manually, or "/system/bin/dhcpd eth0")
-add DNS (setprop net.dns1 *yourDNSserver*)
A couple caveats, I've noticed.
1) It doesn't play nice with wifi. I sort of expected this, but bringing up wlan0 and eth0 at the same time crashes the tablet.
2) Not all apps recognize the internet connection. This is a bit frustrating since most do (including the Browser), but not all.
Click to expand...
Click to collapse
Thanks for the extra info--but a link the the driver jcsullins provided you would be a lot more helpful! Any chance you can post it somewhere for us?
all4adriver said:
Thanks for the extra info--but a link the the driver jcsullins provided you would be a lot more helpful! Any chance you can post it somewhere for us?
Click to expand...
Click to collapse
*bump*
is there a USB ethernet adapter that will work on our touchpads without a driver?
all4adriver said:
*bump*
is there a USB ethernet adapter that will work on our touchpads without a driver?
Click to expand...
Click to collapse
I figured out how to compile drivers manually myself shortly after my posts in this thread. I havent used my build environment in a while though, should still be able to check out what (if any) drivers are built into the kernel by default. Do you already have an adapter?
ba114 said:
I figured out how to compile drivers manually myself shortly after my posts in this thread. I havent used my build environment in a while though, should still be able to check out what (if any) drivers are built into the kernel by default. Do you already have an adapter?
Click to expand...
Click to collapse
OMG thank you for responding! No, I don't have an adapter yet--was waiting to find out which one works and I'll buy that. I'm open to suggestions. Thank you!
You are my shining beacon of hope ba114! Have you had a chance to see what drivers might exist in the kernel?
I read elsewhere that the cyanogenmod for the asus transformer contains a driver compatible with Asix AX88772. That chipset is what this cheapo adapter (OMG, no links for noobs!) uses. I have half a mind to buy one just to see, but it would help immensely if someone could confirm that jcsullins cm9 or cm10 for the touchpad also has support for this chipset baked in...
Hopefully giving you something to work with will make this less of a "needle in the haystack"...
Thanks!
really wish I could post links, as jscullins has posted the driver!
hxxp://goo.im/devs/jcsullins/cmtouchpad/misc/mcs7830.ko
all4adriver said:
really wish I could post links, as jscullins has posted the driver!
hxxp://goo.im/devs/jcsullins/cmtouchpad/misc/mcs7830.ko
Click to expand...
Click to collapse
http://goo.im/devs/jcsullins/cmtouchpad/misc/mcs7830.ko
could use some help
OK, finally got my OTG cable and USB ethernet. Let's do this!
Tried to follow these instructions:
So to review:
-copy driver (to /system/lib/modules)
-insert module ("insmod /system/lib/modules/*yourdriver*.ko")
-get an IP address (manually, or "/system/bin/dhcpd eth0")
-add DNS (setprop net.dns1 *yourDNSserver*)
Had to troubleshoot why my Touchpad wasn't being seen as a USB mass storage device. DONE. I'm feeling like a boss.
Windows Explorer didn't see the main system--just the "SD Card". What ever--not big deal. I copied the driver over to the SD Card. Downloaded Astro File Manager to copy the file to /system/lib/modules. Nope. Denied.
No problem! Dropped to terminal and enabled super user. Astro is still a no go. No worries!! I'm a big boy--I'll do this in terminal! Taught myself enough command line jargon to navigate to the file, and copy it to the intended directory. NOPE. Directory is read only.
OK, so I navigate there and try to chmod the directory with u+w. "Bad mode". Research that to learn I have to use the numbers. So I try that (775) and now it tells me it is a read-only file system.
sigh
It might not seem like it, but I'm trying. I really am.
Can someone tell me how to get past step one of this process? Please? What on earth am I doing wrong?
I recently had to do some wizardry on my phone to get openvpn to co-operate, and I suspect that would work here but I don't understand the commands, and fear I'd end up screwing something up.
This was the command:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
I'm guessing I need to unmount the system so I can work on it and copy the file into that directory? Is that the case? Would the command line be the same, or different?
Anyone else get this to work now that the driver has been posted publicly?
Thanks!!!!
To help those who come after me:
Grab ES File Explorer. It includes a Root Explorer that lets you mount the file system as writable. The "copy to" command claimed to work but did not copy the file. Copy the driver, then manually navigate to /system/lib/modules and paste. Voila.
-insert module ("insmod /system/lib/modules/*yourdriver*.ko")
Click to expand...
Click to collapse
this appeared to work
-get an IP address (manually, or "/system/bin/dhcpd eth0")
Click to expand...
Click to collapse
this took me a long time to figure out. as far as I can tell, the only "directions" noobs like me have to follow contain typos. the command should read dhcpcd eth0
HOWEVER, what I get instead is eth0: interface not found or invalid
a little help here? Does the mcs7830.ko driver work with the Asix AX88772 chipset?
Stupid question--should I be expecting the touchpad to power the USB ethernet adapter via the OTG cable, or do I require a "Y" cable to supply power? Is that why I'm getting:
eth0: interface not found or invalid
Click to expand...
Click to collapse
all4adriver said:
Stupid question--should I be expecting the touchpad to power the USB ethernet adapter via the OTG cable, or do I require a "Y" cable to supply power? Is that why I'm getting:
Click to expand...
Click to collapse
I would assume so. Every HP Touchpad tutorial that I've see that mentions an OTG cable also mentions it needing to be powered.