Hi All,
I have Samsung Galaxy Ace GT-S5830i (rooted). The In-call volume of my phone (for ear phone only) is very low. Is there any way to increase it. I have gone through this link. But my phone doesn't go to service mode by dialing *#*#197328640#*#*. I managed go to service mode by dialing *#7284#, but just blank screen appears under the service mode header.
Any suggestion how to achieve the task as explained in above link?
Regards,
Jitu
jitups said:
Hi All,
I have Samsung Galaxy Ace GT-S5830i (rooted). The In-call volume of my phone (for ear phone only) is very low. Is there any way to increase it. I have gone through this link. But my phone doesn't go to service mode by dialing *#*#197328640#*#*. I managed go to service mode by dialing *#7284#, but just blank screen appears under the service mode header.
Any suggestion how to achieve the task as explained in above link?
Regards,
Jitu
Click to expand...
Click to collapse
Well, the thread was for Ace 5830 not 5830i/c/m..... And the OP clearly Mentioned that he had only tested it on CM7 7.2.0 RC3 for ACE (Not ACE-i) so he himself is not sure that if it will work or not on other ROMS. Btw, have u tried pressing the Vol Up Button Multiple times while you are listening to a call???
How to access "Service Mode" from Galaxy Ace GT-S5830i
saeed14i said:
Well, the thread was for Ace 5830 not 5830i/c/m..... And the OP clearly Mentioned that he had only tested it on CM7 7.2.0 RC3 for ACE (Not ACE-i) so he himself is not sure that if it will work or not on other ROMS. Btw, have u tried pressing the Vol Up Button Multiple times while you are listening to a call???
Click to expand...
Click to collapse
Ok. Let's forget about that link. Kindly let me know how to access "Service Mode" from Galaxy Ace GT-S5830i.
Thanks,
Jitu
jitups said:
Ok. Let's forget about that link. Kindly let me know how to access "Service Mode" from Galaxy Ace GT-S5830i.
Thanks,
Jitu
Click to expand...
Click to collapse
*#*#197328640#*#* took me to services mode without any problems on "Stock Rom with Custom Kernel". I guess you should take a nandroid backup, reset the phone to factory defaults and then try. I'm not sure which Rom u are using, but if it is custom ROM then that may be a reason behind the code not working for u
Related
i got a samsung galaxy s (i9000) yesterday and i hope to run a new software for the phone but after i have download the prog and the file that need to use ..i follow the step as they say by press "volume down,home and power on key"to change the download mode but it never change to it and it always show the startup image then it restart and restart...what's going on and what solution that can be made ? i feel confused and dun noe how to do it....pls ..tell me a clear and easy way to solve this problem.cos i was a beginner and it was first time i flash this phone ......
The guys over in the I9000 forum might be able to help you a bit better... the Captivate is the US variant- we don't even have a physical home button so our procedures are a bit different
Zilch25 said:
The guys over in the I9000 forum might be able to help you a bit better... the Captivate is the US variant- we don't even have a physical home button so our procedures are a bit different
Click to expand...
Click to collapse
+1 to this, but if you are still here, which program did you download?
I assume because you're in this forum, you used the Odin one-click downloader (which is designed for the AT&T captivate) and even says "NOT FOR i9000" like a million times across the top. so if you're stuck in a boot loop with the AT&T logo flashing and then a black screen and then repeating forever, the last I checked that was the only thing you could do to actually brick your phone.
it is the only unresolved issue for i9000 phones until JTAG becomes an option. I believe the i9000 needs to use the physical home button for recovery/download, and because we don't have that, you can't get into those modes to repair the problem.
if this isn't what you did, then yes, head on over to the i9000 thread where they're more likely to have information to help out. they're also more likely to have the info on any potential fixes if it is what happened.
Thread moved to i9000 Q&A
download the new JH2 fix, which includes the new SPL to re-enable the 3 button modes
HI ALL!
i know a lot of people is looking a way to disable this on stock roms (i am one of them ) so i started looking and accidently found this app and now i want u all to know about it beacuse it WORKS!!!
***FINE VOLUME CONTROL***
https://play.google.com/store/apps/details?id=opotech.finevolumev2&hl=en
https://play.google.com/store/apps/details?id=opotech.finevolume.unlocker&hl=en
it has an option to modify the volume warning percentage: JUST SET IT TO 100% TO DISABLE
THATS IT
here is my link on dropbox
https://www.dropbox.com/s/lt2zg3myb1di688/XDA.zip
Not working on Galaxy S4. Rebooting device shows the warning again.
portscan said:
Not working on Galaxy S4. Rebooting device shows the warning again.
Click to expand...
Click to collapse
This work for me on Galaxy S4
http://forum.xda-developers.com/showthread.php?t=2226069
hi guys
i am sorry if i started a new thread i am new here.................
yesterday i was flashing a rom on my ace using cwm but my due to my laziness of reading the rom turned out be for ace s5830i and now it's not booting i cant access anything neither downloading or recovery mod ........... so is there any way that i can bring dis phone back 2 life or .........
i should just kiss it goodbye :angel: R.I.P ?
Y_2_J said:
hi guys
i am sorry if i started a new thread i am new here.................
yesterday i was flashing a rom on my ace using cwm but my due to my laziness of reading the rom turned out be for ace s5830i and now it's not booting i cant access anything neither downloading or recovery mod ........... so is there any way that i can bring dis phone back 2 life or .........
i should just kiss it goodbye :angel: R.I.P ?
Click to expand...
Click to collapse
WRONG SECTION!
To be lazy it's NOT ALLOWED on XDA forums! FIRST READ RULES and then read the posts completely ten times and finally read it again!!! ...and if you understand them, you'll try any modifications
Are your device a available warranty yet? send it to the technical service
...if not, you can say goodbye to your phone
Viper The Ripper said:
WRONG SECTION!
To be lazy it's NOT ALLOWED on XDA forums! FIRST READ RULES and then read the posts completely ten times and finally read it again!!! ...and if you understand them, you'll try any modifications
Are your device a available warranty yet? send it to the technical service
...if not, you can say goodbye to your phone
Click to expand...
Click to collapse
really no way to fix a hard brick ? n i have used it for 3 yrs
Y_2_J said:
really no way to fix a hard brick ? n i have used it for 3 yrs
Click to expand...
Click to collapse
...I'm sorry
Viper The Ripper said:
...I'm sorry
Click to expand...
Click to collapse
what abut jig ?
Y_2_J said:
hi guys
i am sorry if i started a new thread i am new here.................
yesterday i was flashing a rom on my ace using cwm but my due to my laziness of reading the rom turned out be for ace s5830i and now it's not booting i cant access anything neither downloading or recovery mod ........... so is there any way that i can bring dis phone back 2 life or .........
i should just kiss it goodbye :angel: R.I.P ?
Click to expand...
Click to collapse
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace. Go through the entire thread and you will get to know all the possible solutions. Here is the link,
How to unbrick Samsung Galaxy Ace
I was able to help someone else solve a similar problem today using this guide, so don't worry!
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Do post your result. Hope I Helped
mahithm said:
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace. Go through the entire thread and you will get to know all the possible solutions. Here is the link,
How to unbrick Samsung Galaxy Ace
I was able to help someone else solve a similar problem today using this guide, so don't worry!
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Do post your result. Hope I Helped
Click to expand...
Click to collapse
thanks for the reply but bro i am unable to boot into downloading or recovery mod
any other suggestion ?
Y_2_J said:
thanks for the reply but bro i am unable to boot into downloading or recovery mod
any other suggestion ?
Click to expand...
Click to collapse
Bro, try to follow the guide. Just pressing Vol Down+ Power+ Home button is completely different from preparing your odin, removing battery, connecting phone to computer, inserting the battery and pressing Vol Down+ Power + Home button. This method can, in the best case scenario, force open Download Mode. Give it a try! You have nothing to lose but something to gain. If this doesn't work, guide also provides details on USB Jig which is your last option. Hope I helped
mahithm said:
Bro, try to follow the guide. Just pressing Vol Down+ Power+ Home button is completely different from preparing your odin, removing battery, connecting phone to computer, inserting the battery and pressing Vol Down+ Power + Home button. This method can, in the best case scenario, force open Download Mode. Give it a try! You have nothing to lose but something to gain. If this doesn't work, guide also provides details on USB Jig which is your last option. Hope I helped
Click to expand...
Click to collapse
allright i will try now
Y_2_J said:
allright i will try now
Click to expand...
Click to collapse
Cool! Do post the result
mahithm said:
Cool! Do post the result
Click to expand...
Click to collapse
tried it 2 times now no success u know my phone doesnt even lights up it stays in a switched of kind situation
Y_2_J said:
tried it 2 times now no success u know my phone doesnt even lights up it stays in a switched of kind situation
Click to expand...
Click to collapse
@info2shail2010 had the similar problem but he was able to go to Download mode using that guide. Sadly since that didn't work for you, your only option will be USB Jig. If that doesn't work either then buy a new phone
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
mahithm said:
@info2shail2010 had the similar problem but he was able to go to Download mode using that guide. Sadly since that didn't work for you, your only option will be USB Jig. If that doesn't work either then buy a new phone
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Click to expand...
Click to collapse
ok bro is there any chances that a jig might do it ?.... and how does a jig works i know its made of resistors but wat does the resistors do to my phone ?
Y_2_J said:
ok bro is there any chances that a jig might do it ?.... and how does a jig works i know its made of resistors but wat does the resistors do to my phone ?
Click to expand...
Click to collapse
I haven't used USB Jig or even made one, so can't help you here. But you can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped
mahithm said:
@info2shail2010 had the similar problem but he was able to go to Download mode using that guide. Sadly since that didn't work for you, your only option will be USB Jig. If that doesn't work either then buy a new phone
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Click to expand...
Click to collapse
No bro... i am not able to go to in download mode... i told you... i was using Vol up + power + home key... i was mistakenly thinking it was downloading mode because it was connecting in Odin..... but u told me that is not downloading mode ... that is RamDump mode..... so .. i also cant go to download mode by pressing Vol down + power + home key.... its dead and not responding.. ....
The USB Jig method is just working for softbricked (it can boot, but looping) phones but can't go to recovery or download mode. So, it's not working for hardbricked phone
iqbal_mahmuda said:
The USB Jig method is just working for softbricked (it can boot, but looping) phones but can't go to recovery or download mode. So, it's not working for hardbricked phone
Click to expand...
Click to collapse
Bro, but the above guide says the USB jig for Samsung devices force the device into download mode so you can flash firmware over Odin and restore it to working order. Are you sure about what you said?
mahithm said:
Bro, but the above guide says the USB jig for Samsung devices force the device into download mode so you can flash firmware over Odin and restore it to working order. Are you sure about what you said?
Click to expand...
Click to collapse
i even saw video on youtube about a hard bricked s3 ,galaxy y, s2 and note n7000 but in the s3 the guy got his phone hardbricked while rooting ..... i got it hard bricked due flashing another handsets rom
Y_2_J said:
i even saw video on youtube about a hard bricked s3 ,galaxy y, s2 and note n7000 but in the s3 the guy got his phone hardbricked while rooting ..... i got it hard bricked due flashing another handsets rom
Click to expand...
Click to collapse
if you have this phone fixed somehow, can you let me updated? i have exactly same condition right now!
rinaldo.jonathan said:
if you have this phone fixed somehow, can you let me updated? i have exactly same condition right now!
Click to expand...
Click to collapse
allright it might take some time cause i dont hve money to buy the jig right now my pocket money is empty so it will take me sometime but i will let u know
Hey guys
first of all thanks a lot for this great forum.
I have a question regarding my new Samsung Galaxy S3 Mini (Value Edition) (model number: GT-I8200N).
Is there any way to root my phone? I can't find any info for this model on the internet.
In this thread only the GT-8200 is mentioned. http://forum.xda-developers.com/showthread.php?t=2185700. How is this method working?
I found a guide for rooting the "normal" S3 mini by flashing the CWM and SuperSU.
Is it possible to root my phone this way without bricking it?
Thanks in advance for your help!
wondering
tex4 said:
Hey guys
first of all thanks a lot for this great forum.
I have a question regarding my new Samsung Galaxy S3 Mini (Value Edition) (model number: GT-I8200N).
Is there any way to root my phone? I can't find any info for this model on the internet.
In this thread only the GT-8200 is mentioned. http://forum.xda-developers.com/showthread.php?t=2185700. How is this method working?
I found a guide for rooting the "normal" S3 mini by flashing the CWM and SuperSU.
Is it possible to root my phone this way without bricking it?
Thanks in advance for your help!
Click to expand...
Click to collapse
yes i want to know too
Is this phone built on same board as the US s3mini sm-g730a? If so at least you can root it. Dont try anything for i8190.
Sent through time and space from my s3mini/CM11
The specs of the two models look similiar but how can I check which board is in my phone?
Thanks alot for the advice not to try anything for the gt-i9190!
root i8200N 100%
I confirm that VRoot works 100% on i8200N sorry for my english.
sebcio76 said:
I confirm that VRoot works 100% on i8200N sorry for my english.
Click to expand...
Click to collapse
hi!can u share which version did? as iam trying with the latest version and it cant!
wbr
reytech
Try this, it roots almost any device.
Hi, i have an i8200L and I did root it with the vRoot. But does anyone know if the others mods for i8190 work for this one? Like ROMs and all that?
I've read that you can't flash roms etc. because there are differences in the software (bootloader?).
The chance that you brick your phone is pretty high.
Sent from my GT-I8200N using XDA Free mobile app
Brick?
Hi,
first I tried to flash a custom rom and afterwards I read this thread.
There is no excuse for that, i know. But I know now, that i flashed a wrong rom.
Can I throw the Mobile away or is there a chance for it?
My GT-I8200N now shows me just a window with the words "firmware upgrade encountered
an issue. Please select recovery mode in kies and try again".
I don´t know what to do know, maybe someone can help me.
Thanks
Sid Obey said:
Hi,
first I tried to flash a custom rom and afterwards I read this thread.
There is no excuse for that, i know. But I know now, that i flashed a wrong rom.
Can I throw the Mobile away or is there a chance for it?
My GT-I8200N now shows me just a window with the words "firmware upgrade encountered
an issue. Please select recovery mode in kies and try again".
I don´t know what to do know, maybe someone can help me.
Thanks
Click to expand...
Click to collapse
Try to flash stock firmware with Odin.
http://samsung-updates.com/device/?id=GT-I8200N
THX
Thank you very much, it worked!!!
GT-I8200N Galaxy S3 Mini Value Edition successfully rooted with vroot. It didnt work for the first time, so i tried again and then it worked. Android 4.2.2
Warranty
Hi,
is it true that the warranty is gone now and how can i check if it is so?
I tried to go into recovery mode to see if i can find something, but there it says "Warning custom os can cause..." so i klicked volume down
and canceled it.
Thanks
Sid Obey said:
Hi,
is it true that the warranty is gone now and how can i check if it is so?
I tried to go into recovery mode to see if i can find something, but there it says "Warning custom os can cause..." so i klicked volume down
and canceled it.
Thanks
Click to expand...
Click to collapse
That is download mode. You have to chose vol+ to see your status.
To get out of download mode, just hold power for about 10 sec and it will reboot to system.
Recovery mode: vol+ / home / power
Download mode: vol- / home / power (confirm with vol+)
Thanks for answer. In recovery i can not see anything. In download Mode it says "system status: official". But at the top it says "odin mode" Does that mean that warranty is still ok or not?
Is still ok!
Samsung S3 mini i2800L unlocked - hard bricked
Hi All,
While updating my firmware via odin, the update failed and my phone was stuck in download mode , I did a battery pull and now the phone will not come on at all. The computer makes hardware connection sound when I plug it in or unplug it, but other than that I cant get it to respond.
I would like to get a debrick file or a bootlader.img for this model so I can try to boot it from my SD card. Can anyone help me ????
Sid Obey said:
Hi,
first I tried to flash a custom rom and afterwards I read this thread.
There is no excuse for that, i know. But I know now, that i flashed a wrong rom.
Can I throw the Mobile away or is there a chance for it?
My GT-I8200N now shows me just a window with the words "firmware upgrade encountered
an issue. Please select recovery mode in kies and try again".
I don´t know what to do know, maybe someone can help me.
Thanks
Click to expand...
Click to collapse
Hy,
i had the same problem, kies kannt find the phone, odin break.
after change the cable to the original samsung usb kabel and 3-5 trys, i can flash the stock rom from samfirmware with odin 3.09. the phone runs but i cant clear the dalvik cache. this make error and reboot than.
stefan
sorry.. a little OT.
I almost bought the VE (it was cheaper than the I8190), but b/c i knew i wanted to flash it with CM, i saw this threat soon enough and bought the I8190,
I'm so glad
hi,
i bought Samsung Galaxy S III Mini/GT-I8190 yesterday and i want to hard reset it.
so i turned my phone off and pressed volume down + home + power buttons for 10 seconds and more...
but after that a screen with a box appears for some seconds and is gone. just that!!!!!!!!
also i tried volume up + home + power buttons for download mode.(i want download mode for odin and hard reset using with odin)
but i could n't go to download mode.
i have moborobo installed in my system and every thing is ok about that. means it can recognize my phone.
would you please to give me a solution for fix recovery and download modes and hard reset my phone?
thankjs in advance
Is it original Samsung?
You got root?
Sent through time and space from my s3mini/CM11
tys0n said:
Is it original Samsung?
You got root?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
i really do n't know
how can i figure out it's original samsung or not?
where are you?
waiting for someone to help me about that...
tra_extra said:
waiting for someone to help me about that...
Click to expand...
Click to collapse
Can you make a Screenshot of the box? So then we can better help you if you want know that you have a original Samsung phone, unplug your battery and then you will see on the back page of your phone the product model, serial number, IMEI etc.
home+volume up+power isnt it recovery? home+volume down+power:download mode
Sent from my I8190 NovaFusion CM11
i am so sad
factorexh said:
home+volume up+power isnt it recovery? home+volume down+power:download mode
Sent from my I8190 NovaFusion CM11
Click to expand...
Click to collapse
that was fake
i hate those people
i wate my money
tra_extra said:
that was fake
i hate those people
i wate my money
Click to expand...
Click to collapse
Sent from my I8190 NovaFusion CM11
I think he meant he got a fake phone...
varianceness said:
I think he meant he got a fake phone...
Click to expand...
Click to collapse
listen,
my friend find a menu with china language and told me your phone is from china.
how can i find that menu?
i tried *#06# but it shows phone's IMEI.
after that menu was appeared my friend touched some red bulls on that menu.
i really want to know about that menu...
thanks in advance
tra_extra said:
listen,
my friend find a menu with china language and told me your phone is from china.
how can i find that menu?
i tried *#06# but it shows phone's IMEI.
after that menu was appeared my friend touched some red bulls on that menu.
i really want to know about that menu...
thanks in advance
Click to expand...
Click to collapse
Try *#*#4636*#*#
varianceness said:
Try *#*#4636*#*#
Click to expand...
Click to collapse
hi there
does not work
any other idea?
i tried these :
*#4636#
*#*#4636*#*#
*#4636*#*#*#
*#4636*#*##
nothing happens
tra_extra said:
hi there
does not work
any other idea?
i tried these :
*#4636#
*#*#4636*#*#
*#4636*#*#*#
*#4636*#*##
nothing happens
Click to expand...
Click to collapse
He did mean *#*#4636#*#*
Sent from my SM-G900 using xda-developers app