Related
Hello, i own Samsung Galaxy S Plus and i was trying to flash Cyanogenmod 9 Beta 1 on CWM-based recovery v5.5.0.4 and it ended up as when i reload the phone after the Samsung logo's the recovery opens up again, no booting animation.
What can i do? How to fix it?! IS IT POSSIBLE?!!
Please help!
Kramtoske said:
Hello, i own Samsung Galaxy S Plus and i was trying to flash Cyanogenmod 9 Beta 1 on CWM-based recovery v5.5.0.4 and it ended up as when i reload the phone after the Samsung logo's the recovery opens up again, no booting animation.
What can i do? How to fix it?! IS IT POSSIBLE?!!
Please help!
Click to expand...
Click to collapse
here is the fix http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330 . Good luck !! :good:
Kramtoske said:
Hello, i own Samsung Galaxy S Plus and i was trying to flash Cyanogenmod 9 Beta 1 on CWM-based recovery v5.5.0.4 and it ended up as when i reload the phone after the Samsung logo's the recovery opens up again, no booting animation.
What can i do? How to fix it?! IS IT POSSIBLE?!!
Please help!
Click to expand...
Click to collapse
you may need a i9001 6.0 CWM recovery or Touch CWM recovery for performance, download link on My Android Collections link, below
Amazing! It works!
Running ICS on a full charge, i love you mate
Laurentyu1995 said:
here is the fix http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330 . Good luck !! :good:
Click to expand...
Click to collapse
Thankss uu i have this problem too thanks so much .. and thanks for [email protected]
bleros said:
Thankss uu i have this problem too thanks so much .. and thanks for [email protected]
Click to expand...
Click to collapse
can someone please advice me i have also stuck in recovery loop i download odin i download the files and then following the steps but odin cannot find the phone when i push the start button i get please connect phones
can u please advice.thanks
@ all: if you have this problem have a look at this thread: http://forum.xda-developers.com/showthread.php?t=2053350
dem012 said:
can someone please advice me i have also stuck in recovery loop i download odin i download the files and then following the steps but odin cannot find the phone when i push the start button i get please connect phones
can u please advice.thanks
Click to expand...
Click to collapse
You must install adb driver first i u dont have them then put in download mode is easy
bleros said:
You must install adb driver first i u dont have them then put in download mode is easy
Click to expand...
Click to collapse
I forgot to turn on usb debugging,will that be affected when using odin? And how long the duration when using odin?
i was on jelly bean leak xxls7 so for flashing rocket rom v3 i used Philz 3.5 kernel for xxls7 but after that the screen went off & when i turn on the device only samsung logo appears after that nothing comes on screen .
when i using odin to install philz 2.7 the process is stuck on setup connection & i am not even able to use recovery as there is nothing visible on the screen .
what to do????????????/a
i have tried most of versions of odin to flash stock ics but no luck always stuck on setup connection !!
one more thing i want to ask is when i enter in download mode it say OFFICIAL BINARY INSTALLED so if i go to service centre can i claim my warranty ?
remove the battery for a while and try to boot again. If nothing happens, remove battery, reinsert and this time press vol down + power + home for a while till you see the galaxy note logo, and leave it. connect to PC and check if odin sees it. If yes, try to flash the kernel again and check, if not then flash a rom.
nokiamodeln91 said:
remove the battery for a while and try to boot again. If nothing happens, remove battery, reinsert and this time press vol down + power + home for a while till you see the galaxy note logo, and leave it. connect to PC and check if odin sees it. If yes, try to flash the kernel again and check, if not then flash a rom.
Click to expand...
Click to collapse
i did all of this but process using odin stuck on setup connecction.
when you press the 3 button combo, the you will reach a confirmation screen, then you need to press vol up to confirm. only then it will proceed. may be that's why the odin cannot connect.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
Although you can see it, it's probably there. so just take your time and do. don't hurry.
nokiamodeln91 said:
when you press the 3 button combo, the you will reach a confirmation screen, then you need to press vol up to confirm. only then it will proceed. may be that's why the odin cannot connect.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
Although you can see it, it's probably there. so just take your time and do. don't hurry.
Click to expand...
Click to collapse
yes i did that ...
Ok... Try rebooting pc and chekc
nokiamodeln91 said:
Ok... Try rebooting pc and chekc
Click to expand...
Click to collapse
one thing i want to ask is that 3.5 ver of philz is compatible or not with 4.1.2
nokiamodeln91 said:
Ok... Try rebooting pc and chekc
Click to expand...
Click to collapse
nothing happened its still stuck on setup connection
goti(0) said:
one thing i want to ask is that 3.5 ver of philz is compatible or not with 4.1.2
Click to expand...
Click to collapse
there is no change in the kernel it's just the recovery that has changed. so it is compatible. has someone answered your query you posted in philz thread?
goti(0) said:
i was on jelly bean leak xxls7 so for flashing rocket rom v3 i used Philz 3.5 kernel for xxls7 but after that the screen went off & when i turn on the device only samsung logo appears after that nothing comes on screen .
when i using odin to install philz 2.7 the process is stuck on setup connection & i am not even able to use recovery as there is nothing visible on the screen .
what to do????????????/a
Click to expand...
Click to collapse
It did happen to me for the first time when I flash the xxls7. Go to download mode and flash a stock rom. After U have restore your phone. Flash Hardcore Kernel V7. and remember to do 3 wipe. Boot to Recovery and Flash the rom first then the Philz kernel. I did it without problem and have a nice Jelly Bean rom. Good luck and Enjoy.
there are two different threads by phill giving two different things. did you take from the right thread ? just making sure
cheongkk said:
It did happen to me for the first time when I flash the xxls7. Go to download mode and flash a stock rom. After U have restore your phone. Flash Hardcore Kernel V7. and remember to do 3 wipe. Boot to Recovery and Flash the rom first then the Philz kernel. I did it without problem and have a nice Jelly Bean rom. Good luck and Enjoy.
Click to expand...
Click to collapse
i was also hoping for this option but download crashed so downloading again....but i am about to flash 4.1.2 is that ok
rraaka said:
there are two different threads by phill giving two different things. did you take from the right thread ? just making sure
Click to expand...
Click to collapse
i think this is the problem .... i am sure what i selected but i do trust philz kernels so i flashed it directly
can you boot to recovery?
Sent from my GT-N7000 using Tapatalk 2
zai89 said:
can you boot to recovery?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
nope
best to get back to stock Gb via pc odin, root and get a workable recovery and make your way up from there
im thinking you can get into download mode
rraaka said:
best to get back to stock Gb via pc odin, root and get a workable recovery and make your way up from there
im thinking you can get into download mode
Click to expand...
Click to collapse
yes download mode is working fiine
goti(0) said:
yes download mode is working fiine
Click to expand...
Click to collapse
how is the download now working? you said it was a black screen.. if its working then there is no issue. just install ics and install philz kernel for that rom..
nokiamodeln91 said:
how is the download now working? you said it was a black screen.. if its working then there is no issue. just install ics and install philz kernel for that rom..
Click to expand...
Click to collapse
i told that after samsung logo nothing is visible so as boot animation after that nothing is visible & also i cant get into recovery ...
cheongkk said:
It did happen to me for the first time when I flash the xxls7. Go to download mode and flash a stock rom. After U have restore your phone. Flash Hardcore Kernel V7. and remember to do 3 wipe. Boot to Recovery and Flash the rom first then the Philz kernel. I did it without problem and have a nice Jelly Bean rom. Good luck and Enjoy.
Click to expand...
Click to collapse
are you sure same thing happen to your note because even when i am trying to flash stock ics 4.0.4 odin is still stuck at setup connection
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Which phone do you have? Can you go into recovery/download mode?
my phone is samsung galaxy s plus and yes i CAN go into recovery mode
Donovan662 said:
Which phone do you have? Can you go into recovery/download mode?
Click to expand...
Click to collapse
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Habescha said:
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Click to expand...
Click to collapse
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
thx i will try it but can you tell me where i went wrong? is it because i didnt delete kies on my windowspc? or anything special bec i would like to have ics on my phone...do you recommend cm9 instead of 10 because it didnt worked on my sgsplus or do you recommend me to try again...carefully of course ?
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
how can i find out my right firmware for my phone? or is it not important which i download?
Habescha said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Click to expand...
Click to collapse
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
thx though zou helped me a lot...now cm9 is working fine on my sgs plus...does cm10 works too im wondering bec i tried and it stocked after rebooting it
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
no i did all the steps wiping and deleting the data im pretty sure...cm9 is as i already said working fine....do you recommend to try to flash cm10 again on my phone bec im afraid to brick my phone...used the one of the xdaforum 2012-11-22: CM10 alpha4
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
educk said:
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Habescha said:
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Click to expand...
Click to collapse
I'm glad you managed to make it work.
educk said:
I'm glad you managed to make it work.
Click to expand...
Click to collapse
THX but ONE QUESTION?! does cm10 alpha 5 works without any problems? i mean can you go into youre mobile internet when youre outside? bec my phone with alpha 5 cm10 by ivendor does not work....:s i decided to flash the older alpha 4 until i found out the reason why it doesnt function...any guesses? =)
OK FOUND THE FIX ZIP ALREADY O XDA DDDDDD
ONE LAST THING : the vibration of the back and menu button is for me to hard....i found out that on my sgs plzs cm10 alpha 5 in settings-advanced there is NO VIBRATION setting in there, on my friends one there were several more options to choose!
is it maybe bec i flashed my phone with an older cwmrecovery?i think its 5.0 blabla...do i have to flash it again with the newer once 6.blabla?
thank you GUYS for youre quick help
help.....my xperia miro stuck at black screen after sony logo came out
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
AndrewLian said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
Do you have a Sony? Post then better in the threads for your phone.
This is section for Samsung Galaxy S
tetakpatalked from N7100
cm 10.2.1.3 installation failed
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
chinarredij said:
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
Click to expand...
Click to collapse
You have posted in wrong thread here.
tetakpatalked from 1+One
Hi all,
I know this is not the right area but I'm not able to post in the DEV board...
I'm using i9001 and now I'm on [ROM][JB][4.2.2][JDQ39E] CyanogenMod 10.1 by ADC Team - Release 5 - Kernel 3.4.x
I've also TWRP 2.6.0.0 Recovery on the phone because CWM has a lot of issues.
ROM and TWRP are from this page: http://forum.xda-developers.com/showthread.php?t=2315448
When I try to do a backup with TWRP my screen turns black after some time. The screen turns also black when I disable screen timeout.
Also when I'm in the main menu of TWRP screen goes black after some time.
When screen was turned off I'm not able to return to TWRP. I have to restart the phone.
Three questions:
Does anyone of you have the same issue and maybe solved that?
Does the backup fail when screen is black or is the backup finished in backgroud? Anyone knowing that or knows how to check?
Kind regards
Lukas
lok1411 said:
Hi all,
I know this is not the right area but I'm not able to post in the DEV board...
I'm using i9001 and now I'm on [ROM][JB][4.2.2][JDQ39E] CyanogenMod 10.1 by ADC Team - Release 5 - Kernel 3.4.x
I've also TWRP 2.6.0.0 Recovery on the phone because CWM has a lot of issues.
ROM and TWRP are from this page: http://forum.xda-developers.com/showthread.php?t=2315448
When I try to do a backup with TWRP my screen turns black after some time. The screen turns also black when I disable screen timeout.
Also when I'm in the main menu of TWRP screen goes black after some time.
When screen was turned off I'm not able to return to TWRP. I have to restart the phone.
Three questions:
Does anyone of you have the same issue and maybe solved that?
Does the backup fail when screen is black or is the backup finished in backgroud? Anyone knowing that or knows how to check?
Kind regards
Lukas
Click to expand...
Click to collapse
I had the same issue.
you can fix it by installing another version of twrp.
(I am not allowed to post links)
different twrp versions:
forum.xda-developers.com/showthread.php?t=2129298
Thank you!
which version are you runnung on your I9001
Then I can take the same if you are saying that this is stable
lok1411 said:
Thank you!
which version are you runnung on your I9001
Then I can take the same if you are saying that this is stable
Click to expand...
Click to collapse
my phone is flashed to stock.
I go flash the recovery and i will report you.
---------- Post added at 03:17 PM ---------- Previous post was at 02:39 PM ----------
lok1411 said:
Thank you!
which version are you runnung on your I9001
Then I can take the same if you are saying that this is stable
Click to expand...
Click to collapse
rdrai said:
my phone is flashed to stock.
I go flash the recovery and i will report you.
Click to expand...
Click to collapse
twrp 2.2.1 is stable for me.
you can download it from mediafire.
mediafire.com/download/0ufe8dcv5kkajay/twrp2.2.1-recovery.zip
please report the result back
If it worked please hit the thanks button
Hi,
thanks for your help.
some more questions regarding TWRP.
Acutally I'm running2.6.0.0
Is it possible to "downgrade" to a lower version?
Backups of 2.6.0.0 won't be used in oder versions, right?
How to deploy a downgrade? Can I just do it as an upgrad and install from zip or are there any specials.
Just replacing would work or is it a bricked version which means I have to reinstall CM10.1 and other stuff?
Last: What deffers your build from the http://forum.xda-developers.com/showthread.php?t=2129298 => TWRP => Old releases => [2.2.2.1] [1] ?
Or can this be also used?
To downgrade your recovery, just download the zip-file for twrp 2.2.1 and flash it via recovery. I don't know if your 2.6.0.0-backups will work with 2.2.1, but i would rather say no.
There shouldn't be any differences between the recovery from rdai's link and yours, you can take any of them.
Greetings, käsebr0t
Sent from my GT-I9001 using xda app-developers app
käsebr0t said:
To downgrade your recovery, just download the zip-file for twrp 2.2.1 and flash it via recovery
Click to expand...
Click to collapse
ceese! sorry chears!
You mean boot into TWRP, klick install and choose the 2.2.1 zip and install.
Or what you mean by flash via recovery.
Sorry for the stupid questions.
lok1411 said:
ceese! sorry chears!
You mean boot into TWRP, klick install and choose the 2.2.1 zip and install.
Or what you mean by flash via recovery.
Sorry for the stupid questions.
Click to expand...
Click to collapse
no thanks for me !?!
---------- Post added at 12:01 PM ---------- Previous post was at 11:25 AM ----------
lok1411 said:
ceese! sorry chears!
You mean boot into TWRP, klick install and choose the 2.2.1 zip and install.
Or what you mean by flash via recovery.
Sorry for the stupid questions.
Click to expand...
Click to collapse
twrp 2.2.1 and 2.2.2.1 are different versions, flash 2.2.1 from mediafire as i told.
Yes flash in twrp
Hi
rdrai said:
no thanks for me
Click to expand...
Click to collapse
now thanks to all for answering my stupid nerd questions!
And special thanks to rdrai for your twrp version
just installed your zip and tried to backup afterwards. Was running fine. no black screen or shutdown during backing up. Backup don within 155 secs.
Added your twrp version directly to my folder where I've stored the stable versions for CM10.1 and gaaps. Now you are also in and I have all for a pure, stalbe reset of the phone if needed.
Once more many thanks!
one more question. I added the flag "this post is a question"
Is it possible to somehow set this thread as "solved" ?
lok1411 said:
one more question. I added the flag "this post is a question"
Is it possible to somehow set this thread as "solved" ?
Click to expand...
Click to collapse
Glad to hear your problem is solved. :highfive:
i am also new on xda but i think if you add solved in the threat name then its marked as solved.
Threat title : (SOLVED) Issue with TWRP on I9001:good:
Sorry for bad english i am dutch.
Hi Guys,
Before I posted this I have trawled the forums looking for the answer but only found part answers hence this post.
Ok I rooted y n7000 using framaroot then installed superuser and cwm all good to this point.
I then tried to install a custom rom and this is where it all went pear shaped.
I ave been left with Android system recovery <3e>.
Every time I try to install a rom I get error message :
signature length doesn't match EOCD marker
signature verifaction failed
Ok so I have now downloaded a stock ROM,ODIN and Keis however Keis will not connect to my phone and I have no idea how to use odin.
I really would appreciate your help Guys
bazza500 said:
Hi Guys,
Before I posted this I have trawled the forums looking for the answer but only found part answers hence this post.
Ok I rooted y n7000 using framaroot then installed superuser and cwm all good to this point.
I then tried to install a custom rom and this is where it all went pear shaped.
I ave been left with Android system recovery <3e>.
Every time I try to install a rom I get error message :
signature length doesn't match EOCD marker
signature verifaction failed
Ok so I have now downloaded a stock ROM,ODIN and Keis however Keis will not connect to my phone and I have no idea how to use odin.
I really would appreciate your help Guys
Click to expand...
Click to collapse
What custom rom did you try to install? Could be a bad download.
Does the phone still boot?
What was the stock software that was on your note?
that's very important question
kaborayyan said:
What was the stock software that was on your note?
that's very important question
Click to expand...
Click to collapse
Hi,
It was jb 4.1.2 XXLT9 hope this helps.
bazza500 said:
Hi,
It was jb 4.1.2 XXLT9 hope this helps.
Click to expand...
Click to collapse
Use this thread as tutorial for using Odin and lot more.
hi nokiamodeln91 thanks for the reply but there dosen't seem to be any link ?
bazza500 said:
hi nokiamodeln91 thanks for the reply but there dosen't seem to be any link ?
Click to expand...
Click to collapse
What links do you need?
nokiamodeln91 said:
What links do you need?
Click to expand...
Click to collapse
bazza500 said:
hi nokiamodeln91 thanks for the reply but there dosen't seem to be any link ?
Click to expand...
Click to collapse
Here:
http://forum.xda-developers.com/showthread.php?t=1424997
Thanks nokiamodeln91
Will give it a go and report back :good:
Right tried Odin but it does not fond my phone.
I have reinstalled drivers via Kies
www.confused.com
bazza500 said:
hi nokiamodeln91 thanks for the reply but there dosen't seem to be any link ?
Click to expand...
Click to collapse
Oops. How did I miss it...
Thanks @treacherous_hawk
---------- Post added at 05:12 PM ---------- Previous post was at 05:10 PM ----------
bazza500 said:
Right tried Odin but it does not fond my phone.
I have reinstalled drivers via Kies
www.confused.com
Click to expand...
Click to collapse
Once you have installed kies.. Go to task manager and kill all process of kies.
Then boot the phone in download mode. Then connect the USB cord.
nokiamodeln91 said:
Oops. How did I miss it...
Thanks @treacherous_hawk
---------- Post added at 05:12 PM ---------- Previous post was at 05:10 PM ----------
Once you have installed kies.. Go to task manager and kill all process of kies.
Then boot the phone in download mode. Then connect the USB cord.
Click to expand...
Click to collapse
oki doki
bazza500 said:
oki doki
Click to expand...
Click to collapse
nope still no computor recognises when I plug phone in but niether Keis or Odin finds it ?
OK.. Then download Philz jb kernel. Any will do. Download a custom rom like cm or any Samsung based tw rom. Place both on external sd card. (use a card reader).
Then boot into recovery mode. Then choose apply update from external storage, choose the Philz kernel. Flash it.
Power off the phone and boot into recovery mode again. You should see Philz cwm recovery.
Now choose install zip and flash the rom zip file. Wait for it to finish. Reboot.
nokiamodeln91 said:
OK.. Then download Philz jb kernel. Any will do. Download a custom rom like cm or any Samsung based tw rom. Place both on external sd card. (use a card reader).
Then boot into recovery mode. Then choose apply update from external storage, choose the Philz kernel. Flash it.
Power off the phone and boot into recovery mode again. You should see Philz cwm recovery.
Now choose install zip and flash the rom zip file. Wait for it to finish. Reboot.
Click to expand...
Click to collapse
Ok Thanks for all your help will try this and report back.:good:
nokiamodeln91 said:
Oops. How did I miss it...
Thanks @treacherous_hawk
---------- Post added at 05:12 PM ---------- Previous post was at 05:10 PM ----------
Once you have installed kies.. Go to task manager and kill all process of kies.
Then boot the phone in download mode. Then connect the USB cord.
Click to expand...
Click to collapse
Ok,
Tried 2 versions of PhilZ cwm and same problem as before :
signature length doesn't match EOCD marker
signature length doesn't match EOCD marker
signature verifacation failed
Any ideas guys ?
bazza500 said:
Ok,
Tried 2 versions of PhilZ cwm and same problem as before :
signature length doesn't match EOCD marker
signature length doesn't match EOCD marker
signature verifacation failed
Any ideas guys ?
Click to expand...
Click to collapse
SUCCESS !!!!!!!!!!
Well part success,I have eventually managed to get PhilZ cwm installed thanks guys.
Trouble is I cant get it to accept a rom :crying:
gonna try a different memory card.............
bazza500 said:
SUCCESS !!!!!!!!!!
Well part success,I have eventually managed to get PhilZ cwm installed thanks guys.
Trouble is I cant get it to accept a rom :crying:
Click to expand...
Click to collapse
after flashing philz kernel, reboot into recovery and if you did so, what is the error you are getting?
treacherous_hawk said:
after flashing philz kernel, reboot into recovery and if you did so, what is the error you are getting?
Click to expand...
Click to collapse
OK this is a screen shot of odin it goes no further that what it shows.
If I try to install a custom Rom from the sd card I get :
finding update package...
opening update package...
E:can't open /sdcard/pa_n7000-4.0-alpha-20131125.zip
(bad)
instalation aborted
Any thoughts ?
bazza500 said:
OK this is a screen shot of odin it goes no further that what it shows.
If I try to install a custom Rom from the sd card I get :
finding update package...
opening update package...
E:can't open /sdcard/pa_n7000-4.0-alpha-20131125.zip
(bad)
instalation aborted
Any thoughts ?
Click to expand...
Click to collapse
sorry forgot to mention tried 5 different roms now all for n7000 via goo.im