Ok I'm wondering if someone could help me out here. I picked up a Korean SKT Galaxy Note today, however the LTE isn't compatible with docomo's network. I did some searching online and found that there is a code you can put into the dialer to access a STK hidden menu, which ultimately let's you alter the phone to accept WCDMA frequencies and such. The code is:
319712358
However the phone then requires a password. I found 774632 as the password but when I put in the sequence, nothing happens.
I bought this phone used for 65,000 yen (about $720) and it is apparently unlocked, as I can use my docomo number without a problem. I desperately want to keep the phone (the store said I could return it) but have no use for it without the data, and thus would be incredibly grateful if someone could help me out...
May be try to use 996412 instead of 774632
TokyoGuy said:
Ok I'm wondering if someone could help me out here. I picked up a Korean SKT Galaxy Note today, however the LTE isn't compatible with docomo's network. I did some searching online and found that there is a code you can put into the dialer to access a STK hidden menu, which ultimately let's you alter the phone to accept WCDMA frequencies and such. The code is:
319712358
However the phone then requires a password. I found 774632 as the password but when I put in the sequence, nothing happens.
I bought this phone used for 65,000 yen (about $720) and it is apparently unlocked, as I can use my docomo number without a problem. I desperately want to keep the phone (the store said I could return it) but have no use for it without the data, and thus would be incredibly grateful if someone could help me out...
Click to expand...
Click to collapse
hi
if urs is shv-e160s , the code is 996412 hope it help
thank you very much lancechg, 996412 works on my e160s. my major problem is how to remove the restriction on camera and usb connection wich prevents me from rooting my gnote. can you give sn advice on to remove it. thanks in advance...
Success!!!
This is a step by step that I used and it worked(Tmobile) for official release ICS:
01. Update to ICS
02. Power off phone and wipe data in Stock Recovery
03. Power on phone and edit the hex values with Radiocomm see: post 29/30 http://forum.xda-developers.com/showthread.php?t=1297714&page=3
04. Power off phone
05. Remove sim card
06. Power phone back on
07. Connect to PC
08. Root
09. Delete STK.apk (edit: you no longer have to delete, just rename to stk.apk.bak)
10. Delete STK.odex (edit: you no longer have to delete, just rename to stk.odex.bak)
11. Modify Build.prop values as is:
ro.telephony.default_network=7
ro.mot.phonemode.vzw4gphone=0
telephony.lteOnCdmaDevice=0
and add this to the bottom:
ro.telephony.ril.v3=signalstrength
12. Power off phone
13. Insert SIM
14. Power on!
15. Dial *#*#info#*#* switch to WCDMA Preferred
Should be good to go!
I'm sorry, but I need to ask a question that is probably frustratingly obvious,
When I go to use the RadioComm tool, the instructions says to put the phone in PC mode. I can't find PC mode on the phone, and whenever I try to use RadioComm, everything is red... the blood-red of failure...
How did you get around this? I've only had the phone for an afternoon (I'm enabling TMobile for a friend) so maybe I just don't know where the button for PC mode is!
Thanks for this. I was about to give up. I thought it was required to downgrade to the last GB rom (which is, apparently, impossible). I'm glad to give this a shot.
Sompom said:
I'm sorry, but I need to ask a question that is probably frustratingly obvious,
When I go to use the RadioComm tool, the instructions says to put the phone in PC mode. I can't find PC mode on the phone, and whenever I try to use RadioComm, everything is red... the blood-red of failure...
How did you get around this? I've only had the phone for an afternoon (I'm enabling TMobile for a friend) so maybe I just don't know where the button for PC mode is!
Thanks for this. I was about to give up. I thought it was required to downgrade to the last GB rom (which is, apparently, impossible). I'm glad to give this a shot.
Click to expand...
Click to collapse
Press the menu (at the left bottom corner), then system settings, choose developer options, then click usb debugging. Connect the usb cable to the pc. usb debugging connected displayed on the top left corner. Slide the usb icon down, tag the connected as media device, then click media device (MTP).
---------- Post added 27th October 2012 at 12:19 AM ---------- Previous post was 26th October 2012 at 11:57 PM ----------
DBoyFresh954 said:
Success!!!
This is a step by step that I used and it worked(Tmobile) for official release ICS:
01. Update to ICS
02. Power off phone and wipe data in Stock Recovery
03. Power on phone and edit the hex values with Radiocomm see: post 29/30 http://forum.xda-developers.com/showthread.php?t=1297714&page=3
04. Power off phone
05. Remove sim card
06. Power phone back on
07. Connect to PC
08. Root
09. Delete STK.apk
10. Delete STK.odex
11. Modify Build.prop values as is:
ro.telephony.default_network=7
ro.mot.phonemode.vzw4gphone=0
telephony.lteOnCdmaDevice=0
and add this to the bottom:
ro.telephony.ril.v3=signalstrength
12. Power off phone
13. Insert SIM
14. Power on!
15. Dial *#*#info#*#* switch to WCDMA Preferred
Should be good to go!
Click to expand...
Click to collapse
Confirm it works on ATT. Thanks
wnandroid said:
Press the menu (at the left bottom corner), then system settings, choose developer options, then click usb debugging. Connect the usb cable to the pc. usb debugging connected displayed on the top left corner. Slide the usb icon down, tag the connected as media device, then click media device (MTP).
Click to expand...
Click to collapse
Haha... It turned out to be just as stupid an error as I thought it would be... I didn't have the correct drivers installed -.- . I installed MotoCast, rebooted, tried again, and it worked! Yay.
Thank you!
Also, more notes for people who are as moto-clueless as me:
Stk.apk and Stk.odex are in /system/app
build.prop is in /system
It now accepts my Tmobile SIM, but it can't find any service. I've looked around, and it seems that lots of people with TMobile are having no luck with stock ICS, but ATT works fine. Any ideas? I changed ro.telephony.default_network=7 to =0 because that's how it appears in my TMobile MyTouch 4G Slide.
Sompom said:
Haha... It turned out to be just as stupid an error as I thought it would be... I didn't have the correct drivers installed -.- . I installed MotoCast, rebooted, tried again, and it worked! Yay.
Thank you!
Also, more notes for people who are as moto-clueless as me:
Stk.apk and Stk.odex are in /system/app
build.prop is in /system
It now accepts my Tmobile SIM, but it can't find any service. I've looked around, and it seems that lots of people with TMobile are having no luck with stock ICS, but ATT works fine. Any ideas? I changed ro.telephony.default_network=7 to =0 because that's how it appears in my TMobile MyTouch 4G Slide.
Click to expand...
Click to collapse
Try using my build.prop file. Heres the link to my post. http://forum.xda-developers.com/showthread.php?p=33261067
Sent from my DROID BIONIC using xda app-developers app
Do you have it working on T-Mobile? I gave it back to him this morning, but I sent him idiot-quality instructions to replace the build.prop. He says it doesn't work. He's on prepaid, so he as decided to just switch to Verizon. (This is a great idea where we live, T-Mobile has 2G and Verizon has 4G...) I hope this is an isolated instance rather than a generic problem with T-Mobile on the Bionic.
If I'm walking with him past an ATT store, I'll see if they'll let me try a SIM, so see if it was just me or if it's locked (or something?)... Unfortunately, there aren't many ATT stores for hours of where we live
Sompom said:
Do you have it working on T-Mobile? I gave it back to him this morning, but I sent him idiot-quality instructions to replace the build.prop. He says it doesn't work. He's on prepaid, so he as decided to just switch to Verizon. (This is a great idea where we live, T-Mobile has 2G and Verizon has 4G...) I hope this is an isolated instance rather than a generic problem with T-Mobile on the Bionic.
If I'm walking with him past an ATT store, I'll see if they'll let me try a SIM, so see if it was just me or if it's locked (or something?)... Unfortunately, there aren't many ATT stores for hours of where we live
Click to expand...
Click to collapse
Yes I have it working on T-Mobile here's a screenshot. The reason 3g/hspa+(4g) doesn't work for T-Mo everywhere with the Bionic is because they are in the process of switching bands to the standard 1900mhz band in the US. ATT users get full use of their band and 3g/hspa+(4g)
Sent from my DROID BIONIC using xda app-developers app
DBoyFresh954 said:
08. Root
09. Delete STK.apk
10. Delete STK.odex
11. Modify Build.prop values as is:
ro.telephony.default_network=7
ro.mot.phonemode.vzw4gphone=0
telephony.lteOnCdmaDevice=0
and add this to the bottom:
ro.telephony.ril.v3=signalstrength
Click to expand...
Click to collapse
that is the part i need explained a bit more.
also Don't T mobile and ATT run on the same Networkish...
I've got a ST(ATT) Sim card for my Droid bionic works fine, cept when i updated to ICS i can no longer send SMS/MMS. Been searching for about 10 days now. no fix.
scarocean said:
that is the part i need explained a bit more.
also Don't T mobile and ATT run on the same Networkish...
I've got a ST(ATT) Sim card for my Droid bionic works fine, cept when i updated to ICS i can no longer send SMS/MMS. Been searching for about 10 days now. no fix.
Click to expand...
Click to collapse
Yes they have the same type of network but they work on different bands. ATT=1900mhz T-Mo=1700mhz(switching to 1900mhz by end of year) The reason SMS/MMS isnt working is because you need to modify the build.prop file in your root folder. Ive attached the 1 click root program for the Bionic, use this to root your phone. After you root your phone you will need to download some type of root explorer so that you can access the root folder. You no longer have to delete the STK files just rename them with .bak extensions. They are located in /system/app. Then access /system and switch to R/W mode. You have to edit build.prop with the values in the guide.
T-Mobile AND AT&T
DBoyFresh954 said:
Yes they have the same type of network but they work on different bands. ATT=1900mhz T-Mo=1700mhz(switching to 1900mhz by end of year) The reason SMS/MMS isnt working is...
Click to expand...
Click to collapse
Works, but i'm only pulling 'Edge' Network. No 3g like before
Thank you VERY much. But i've got some information and a question...
I was too excited to try what you said to do so i didn't go back and read the instructions on post #1.
My phone had the SIM already still in it.
WCDMA was selected
Hex was still set to AT&T/Tmobile.
Then...
-- I Root it.
-- I edit files as given above.
NOTHING CHANGED! CANT SEND SMS STILL!!!
-- Powercycle.
NOTHING CHANGED! CANT SEND SMS STILL!!!
-- Reboot, wipe cache, wipe data/factory reset.
turn phone on: FULL BARS! (had to wait 1-2 minutes. and input SIM password)
Had Voice, but the calls kept failing
--Input APN for ST(att)
SMS/MMS work!!
Voice works
DATA works! ( Shows Edge2 )
My question is, Booted up on: GSM/CDMA Auto (PRL)
GSM = -80dBm
Network: home. ( i have never heard of this.)
IMEI: unknown
my phone number shows on *#*#info, and under phone information -unlikebefore it did not. Yet my IMEI isn't showing... It did before.
The network i had before i made these changes phone displayed ATT as network, not it is 'home'
network type before was HSPA/HSPA+/Edge, not it is just EDGE2.
So i'm not on ATT like before, i am on GSM?
When I send SMS/MMS to my other phone it takes 20 seconds to 5 minutes to show up on her phone.
When I am sent SMS/MMS it takes just as much time to show up on mine.
after about 20 minutes of running the phone SMS send normal speed.
I never did do the "then access /system and switch to R/W mode." Because I don't know what you mean.
when i switch to WCDMA preferred, it took about 3 minutes to load up a signal, The network type is still 'home' before all this it used to be 'ATT'
scarocean said:
Works, but i'm only pulling 'Edge' Network. No 3g like before
Thank you VERY much. But i've got some information and a question...
I was too excited to try what you said to do so i didn't go back and read the instructions on post #1.
My phone had the SIM already still in it.
WCDMA was selected
Hex was still set to AT&T/Tmobile.
Then...
-- I Root it.
-- I edit files as given above.
NOTHING CHANGED! CANT SEND SMS STILL!!!
-- Powercycle.
NOTHING CHANGED! CANT SEND SMS STILL!!!
-- Reboot, wipe cache, wipe data/factory reset.
turn phone on: FULL BARS! (had to wait 1-2 minutes. and input SIM password)
Had Voice, but the calls kept failing
--Input APN for ST(att)
SMS/MMS work!!
Voice works
DATA works! ( Shows Edge2 )
My question is, Booted up on: GSM/CDMA Auto (PRL)
GSM = -80dBm
Network: home. ( i have never heard of this.)
IMEI: unknown
my phone number shows on *#*#info, and under phone information -unlikebefore it did not. Yet my IMEI isn't showing... It did before.
The network i had before i made these changes phone displayed ATT as network, not it is 'home'
network type before was HSPA/HSPA+/Edge, not it is just EDGE2.
So i'm not on ATT like before, i am on GSM?
When I send SMS/MMS to my other phone it takes 20 seconds to 5 minutes to show up on her phone.
When I am sent SMS/MMS it takes just as much time to show up on mine.
after about 20 minutes of running the phone SMS send normal speed.
I never did do the "then access /system and switch to R/W mode." Because I don't know what you mean.
when i switch to WCDMA preferred, it took about 3 minutes to load up a signal, The network type is still 'home' before all this it used to be 'ATT'
Click to expand...
Click to collapse
Some people reported having to wait anywhere from 5 mins to over an hour before the phone fully switched to GSM mode...
Sent from my DROID BIONIC using xda app-developers app
Just follow everything step by step. I learned the hard way that if you deviate even just a little it wont work...
Sent from my DROID BIONIC using xda app-developers app
DBoyFresh954 said:
Yes I have it working on T-Mobile here's a screenshot. The reason 3g/hspa+(4g) doesn't work for T-Mo everywhere with the Bionic is because they are in the process of switching bands to the standard 1900mhz band in the US. ATT users get full use of their band and 3g/hspa+(4g)
Sent from my DROID BIONIC using xda app-developers app
Click to expand...
Click to collapse
T-Mobile is in the process of a complete "re-farm" mainly to make their network iphone compatiple. This means that everything on the network should be operating on the 1900mhz band by spring/summer 2013 which is when they are rumored to be getting the iphone. Regardless, if they still don't offer the iphone this refarm allows any unlocked iphone to be used on their network and get full HSPA+. You can bring an unlocked iphone into their store now and they'll put it on their network but if you don't live in an area where the re-farm is complete you'll only get EDGE access.
This update also applies to any other phone that operates on the 1900mhz band, not just the iCrap. T-Mo also just bought MetroPCS which, in itself, is not a huge deal as far as coverage goes BUT they also get all of Metro's spectrum (plus the spectrum they got from ATT and the failed merger) so they are actually lining themselves up to be the carrier with the most available spectrum as the FCC only has so much to auction off. I am seriously considering jumping ship for them even with my grandfathered unlimited data. They've got unlimited everything for cheaper but I have to see how service is.
I honestly was not aware the Bionic was HSPA+... probably just from not researching it as I have VZW anyway right now... My contract is up in March and even though I am grandfathered unlimited I might give them a shot. They actually charge less for "bring your own phone" and their deals are pretty good. Wife wants iphone and with the re-farm she could have one on T-Mo but her contract is not up till March 2014 so the ETF plus unlocked iphone... $1k... um no... Maybe when she sees how awesome ICS is vs GB she'll change her mind...
scarocean said:
Works, but i'm only pulling 'Edge' Network. No 3g like before
turn phone on: FULL BARS! (had to wait 1-2 minutes. and input SIM password)
Had Voice, but the calls kept failing
Click to expand...
Click to collapse
can I ask what you mean when you say you input sim password? Im trying to get it to work on t-mobile... Well I have 2 bionics, one is mine and I got t-mobile working fine using the radiocomm edit, removing the apk/ and odex file listed by DBoyFresh954 and doing the build prop edit listed by him in the same first post. but the 2nd bionic is my friends and I cant get t-mobile working on it. The only thing thats not the same on the two bionics is my friends is HW B 43/11 while mine is HW A 34/11. If anyone might have a fix or can explane the sim unlock that scarocean was talking about please do post or pm me would be most thankful
HELP!!
Okay, so I got my T-Mobile SIM card in today. Followed everything perfectly and still nothing. No service or anything. I double checked my area for coverage and confirmed that T-Mobile does have service here. I'm on stock 246. I rooted, applied the gsm unlock zip, re-named the stk files, edited the build.prop settings, and switched to WCDMA Preferred. I have the HW B version if that matters. I've been looking everywhere and can't seem to find an answer. Could somebody help please?!
Edit: My phone is now showing AT&T as the network. Also noticed that my Signal is reading -81 dBm and 16 asu. Isn't that a good signal?
trulunacy said:
Okay, so I got my T-Mobile SIM card in today. Followed everything perfectly and still nothing. No service or anything. I double checked my area for coverage and confirmed that T-Mobile does have service here. I'm on stock 246. I rooted, applied the gsm unlock zip, re-named the stk files, edited the build.prop settings, and switched to WCDMA Preferred. I have the HW B version if that matters. I've been looking everywhere and can't seem to find an answer. Could somebody help please?!
Edit: My phone is now showing AT&T as the network. Also noticed that my Signal is reading -81 dBm and 16 asu. Isn't that a good signal?
Click to expand...
Click to collapse
I followed post #1 exactly and my Bionic works on T-Mobile.
What do you mean where you said "applied the gsm unlock zip" --- Either I missed this part or do not understand what you are referring to.
Running rooted Bionic on Synergy ROM on T-Mobile.
I do have a question though....
How to prevent phone from going back to LTE when rebooting. Not the worst thing but have to modify the radio each time phone is rebooted???
Also the ones who got it to work as well, are you getting 3G??? I feel as though I am not....
Thanks again to the person who started Post #1 --- Saved me $$ from buying a new phone from T-Mobile.
huskersone said:
I followed post #1 exactly and my Bionic works on T-Mobile.
What do you mean where you said "applied the gsm unlock zip" --- Either I missed this part or do not understand what you are referring to.
Running rooted Bionic on Synergy ROM on T-Mobile.
I do have a question though....
How to prevent phone from going back to LTE when rebooting. Not the worst thing but have to modify the radio each time phone is rebooted???
Also the ones who got it to work as well, are you getting 3G??? I feel as though I am not....
Thanks again to the person who started Post #1 --- Saved me $$ from buying a new phone from T-Mobile.
Click to expand...
Click to collapse
I flashed a zip that does what you did in Radiocomm. I finally got fed up with the problems and went to AT&T and got a SIM with prepaid. Works great! I just could never get the T-Mobile SIM card to work. Didn't go to waste though. Unlocked my wife's Torch and used it for that.
I have no idea how to make the settings stick for reboots. Odd, that your settings don't stay on WCDMA Preferred. Mine stays after reboot.
I think the Bionic can only get 2G until T-Mobile has finished their refarm. I think there's only a couple that have been set. Don't quote me on that though. Haven't really looked into it a whole lot.
Sent from my AT&T DROID BIONIC using xda app-developers app
just a bit more about files and build prop
I have the droid bionic and I was attempting to get my at&t service on the bionic. I have made it as far as the root step. Where do I find the files to delete? I have a folder /system on my PC but I can't find /system on the bionic. Where is the /system/app folder? Do I need to use device manger find it? A few more details would be much appreciated. a list of files and programs needed would be a nice addition to walkthrough. Just a thought. Plz help thanks
semipro bionic said:
I have the droid bionic and I was attempting to get my at&t service on the bionic. I have made it as far as the root step. Where do I find the files to delete? I have a folder /system on my PC but I can't find /system on the bionic. Where is the /system/app folder? Do I need to use device manger find it? A few more details would be much appreciated. a list of files and programs needed would be a nice addition to walkthrough. Just a thought. Plz help thanks
Click to expand...
Click to collapse
Download ES File Explorer. Hit the menu button once you open it and go to settings. Scroll down to root settings and select all options. Go back to the main menu and hit the Up button at the very top. Scroll down and click on "System." Once in you'll see the "App" folder immediately. Click on that and scroll down to the STK apk's. Once your done renaming go back once and scroll down till you find the build.prop. Click it and use the ES note editor to edit the settings.
As far as adding the signal strength to the build.prop goes just scroll all the way down and add it there.
Sent from my AT&T DROID BIONIC using xda app-developers app
When you do this edit, can you switch back to Verizon's CDMA/LTE by switching sim cards or do you need to redo both the apks and Hex edit?
This tutorial is my method for successfully unlocking the G flex to Cricket/AIO/ATT wireless with data/MMS, No battery drain, no Wifi calling drain.
1. Pros. Use Cricket/AIO/ATT sim.
2. Cons. Must dial International code +1 ( or whatever country code you're in) before every 10 digit number.
********Before we start you need to be on stock 4.4.2 sprint rom with Network Mode LTE/CDMA enabled************
(The roaming option does not appear when on GSM)
Next, change theme from "FLEX" to "LG". For some reason FLEX bugs out after the phone unlocks and causes crashes. (May be an isolated incident)
*Now we need to add the APN from AIO wireless into the Apn list by going into settings>roaming>Access point names
*The APN list will be blank and state "NO APNS" this is normal. Hit the menu button and add the AIO wireless APN settings from
http://buzzmobile.us/aio-wireless-apn-settings-internet-mms/
When completed you will need to press the back button and once again you will be greeted with a blank APN screen. Don't worry it's there.
Follow the instructions for root + unlocking the phone here. Total commander doesn't work on 4.4.2, don't use it, do it all with Root Browser (Get from Play Store).
http://forum.xda-developers.com/showthread.php?p=50477852
After you are finished you should be rooted, successfully finished removing bloatware and left with a half unlocked phone.
Now navigate to settings/tethering and networks/mobile networks/Network Mode and change to GSM/WCDMA
**********************You are finished with this portion of the Tutorial***********************
*Fun Part*
1. Download Rom toolbox on your phone, the free/lite version is fine.
2. Navigate to build.prop editor
3. Find and change the settings listed..
ro.carrier=spr (spr to lowercase)
ro.build.target_operator=spr (spr to lowercase)
persist.service.crash.enable=1
Lets keep something in mind here... Once you change these settings you will need to restart your phone and you will be unlocked for Cricket/AIO/ATT networks, however, at this time you should know that if you venture back into network mode and happen to change your settings back to LTE/CDMA, you will lose the ability to change your network mode back to GSM UNLESS you revert the build.prop changes listed above. You can actively switch from LTE/CDMA and GSM by this method although I don't see why anyone would..
At this point you should have Talk/Text/Data/MMS...If not, you may have done something wrong.
**More funner part***
At this point in the tutorial your phone is doing two things.
1. It lies when it says its only on GSM/WCDMA
2. Rapidly draining the S#$% out of your battery.
We need the MSL Code so we may dial ##DATA# in your phone and access LTE settings.
Follow this Tutorial for retrieving your MSL code.
http://forum.xda-developers.com/showpost.php?p=47324060
After you obtain the MSL pull up the phone application and dial ##DATA#(3282) Navigate into LTE and disable LTE/Band 26/Band 41
When you back out of the menu your phone will restart and stop continuously looking for LTE Radio.
**Final touches**
Remove all and I mean ALL sprint and preloaded wifi calling applications if you experience wifi calling battery draining. For some reason wifi calling spazzes out.
I'm not going to list the apk's because it may be an isolated incident and if you find out wifi calling is draining your battery just long press it in battery stats and go to "APP INFO" and find out what it is named and remove it with root browser...
I have been on Cricket/AIO wireless for two weeks now with HSPA+ and enjoying it.
This method may work with other carriers who knows.
**Food for thought**
1. When I change the ro.carrier settings from lowercase spr to ndo like in the APN i got a cool h+ instead of GSM.
2. I have not been able to wifi tether yet with cricket and I'm actively looking for a way now..
3. Think anyone else has issues with the FLEX theme crashing?
thanks.
Sent from my VS980 4G using XDA Premium 4 mobile app
If you don't mind how much do you pay? Will this work with a T-Mobile Flex? I'm pretty happy with T-Mobile since I got my discount back. I have 4 lines so it's around 25 bucks in savings a month.
sweets55 said:
If you don't mind how much do you pay? Will this work with a T-Mobile Flex? I'm pretty happy with T-Mobile since I got my discount back. I have 4 lines so it's around 25 bucks in savings a month.
Click to expand...
Click to collapse
It should work with t-mobile, i don't see why not, instead of ATT/AIO apn's just add a Tmobile apn and make sure that you have some time to play with the build.prop settings for example...
ro.carrier = spr can be changed to ndo and still work because "in theory" it matches the APN.
After adding the tmobile apn setting, changing ro.carrier to " t-mobile" to match the apn might work .
Try it out and see!
p.s i would leave ro.build.target_operator=spr alone, if all else fails you can change this too.
Thanks for the guide . I picked up a sprint g flex and lg g2 cheap, used your guide on both. Enjoying them on NET10 in the states.
patiently waiting for a custom recovery for kitkat on the flex.
interesting thread. i keep running into an issue though. as soon as i reboot after changing the stuff it reverts to where i was before and nothing saved. any suggestions? root is fine...
awesome stuff here i really want to see this happen on my flex!
Wont allow apn change
so i got stuck with a simple issue. when i go into the apn list there is an apn there already.
cinet.spcs
and when i press the menu key it is not showing the add feature to be able to add the new apn as described in the thread.
after doing these I noticed when opening Wifi it force closes and says "Unfortunantley, Settings has stopped"
only wifi that works is the one i used before doing these mods wont allow adding others
also have tried various wifi repair apps
working for me but getting tons of systemui crashes
Concerning the errors that appear often but I came out I did this : I returned and change in the build prop, spr for SPR capitalized and not returned to me the problem also remove the option to persist crash : 0 , take into GSM mode UMTS network selection mobile. I'm in version 4.4
Not working for me.
I tried this 3 times. Once with stock 4.4.2. Once downgraded to 4.2.2 and another time after updating back to 4.4.2 from OTA. All failed. Could not get any sim to be recognized. I am a smart guy and have done much more complicated methods of flashing, rooting, etc. for Android phones. But this just does not work. The phone states no SIM when I put my Cricket SIM in it. But when I put the Sprint SIM back, it reads it.
Any help would be GREATLY accepted. Thank you.
PS: I called Sprint because this is a clean phone. When I asked for the unlock code they gave me the MSL. I have a feeling that is incorrect but I could be wrong. After an hour on the phone, they said that is the unlock code. No matter how much I tried to tell them it's not.
fresnogamer said:
I tried this 3 times. Once with stock 4.4.2. Once downgraded to 4.2.2 and another time after updating back to 4.4.2 from OTA. All failed. Could not get any sim to be recognized. I am a smart guy and have done much more complicated methods of flashing, rooting, etc. for Android phones. But this just does not work. The phone states no SIM when I put my Cricket SIM in it. But when I put the Sprint SIM back, it reads it.
Any help would be GREATLY accepted. Thank you.
PS: I called Sprint because this is a clean phone. When I asked for the unlock code they gave me the MSL. I have a feeling that is incorrect but I could be wrong. After an hour on the phone, they said that is the unlock code. No matter how much I tried to tell them it's not.
Click to expand...
Click to collapse
Maybe this is a better guide for you:
http://www.droidviews.com/how-to-sim-unlock-sprint-lg-g2-ls980/
The Sim unlock does work, I've been using my sprint g flex on cricket for 6 months or so , but only with H+ .
You don't really need the msl or have the phone in good standing (blacklisted is OK).
If the Sim isn't being recognized that means you didn't do the folder replacement right. I had trouble at this part, which was solved by using the app "ROM toolbox". It took a few tries.
As far as changing the APN , just use any shortcut app on the playstore.
For switching bands, use the app " network" from the playstore. No msl needed.
---------- Post added at 07:13 AM ---------- Previous post was at 07:09 AM ----------
Forgot to mention that I am on 4.4.2 ZVA, there seems to be a problem/troubles with this mod after this update. Definitely get rid of bloatware/sprint to stop updates
Supertacomonkeyexplosion said:
Maybe this is a better guide for you:
http://www.droidviews.com/how-to-sim-unlock-sprint-lg-g2-ls980/
The Sim unlock does work, I've been using my sprint g flex on cricket for 6 months or so , but only with H+ .
You don't really need the msl or have the phone in good standing (blacklisted is OK).
If the Sim isn't being recognized that means you didn't do the folder replacement right. I had trouble at this part, which was solved by using the app "ROM toolbox". It took a few tries.
As far as changing the APN , just use any shortcut app on the playstore.
For switching bands, use the app " network" from the playstore. No msl needed.
---------- Post added at 07:13 AM ---------- Previous post was at 07:09 AM ----------
Forgot to mention that I am on 4.4.2 ZVA, there seems to be a problem/troubles with this mod after this update. Definitely get rid of bloatware/sprint to stop updates
Click to expand...
Click to collapse
Tried this method twice so far. Both times the phone reboots or I get multiple force closes that disable the use of the phone. Guess I'll keep trying. Thanks for the help.
fresnogamer said:
Tried this method twice so far. Both times the phone reboots or I get multiple force closes that disable the use of the phone. Guess I'll keep trying. Thanks for the help.
Click to expand...
Click to collapse
Did you use the files from my link? Flex specific?
Don't use total commander.
What software version are you on?
Even after the FC, does it recognize your Sim?
You must also change the build prop, just realize the guide doesn't have that. Probably why your getting FCs.
Save a copy before making changes:
ro.carrier=spr
ro.build.target_operator=spr
persist.service.crash.enable=1
Supertacomonkeyexplosion said:
Did you use the files from my link? Flex specific?
Don't use total commander.
What software version are you on?
Even after the FC, does it recognize your Sim?
You must also change the build prop, just realize the guide doesn't have that. Probably why your getting FCs.
Save a copy before making changes:
ro.carrier=spr
ro.build.target_operator=spr
persist.service.crash.enable=1
Click to expand...
Click to collapse
Sorry for getting back to you so late. Life is busy with three kids and a full time job.
I wipped and followed the instructions again. VERY closely. It worked. Thank you very much.
fresnogamer said:
Sorry for getting back to you so late. Life is busy with three kids and a full time job.
I wipped and followed the instructions again. VERY closely. It worked. Thank you very much.
Click to expand...
Click to collapse
Sweet. Glad you got it.
The only trouble I have had with this method is if the phone shuts off or I restart, I have to switch the bands back to GSM.
would this work on LS995ZVB? thanks.
Hello there,
First time poster. I've had a hell of a time trying to figure out this problem with my LG L90 D415, updated to the latest version of Lolipop, which I bought advertised as "unlocked" off eBay and intended to use with Consumer Cellular (CC), a virtual GSM network using bandwidth from the AT&T and T-Mobile networks. Such a phone is supposed to work on their network. It is now rooted and ready to go. However, I cannot change the APN settings to use data. Under settings, if I try to create a new APN with a different MNC number, the new APN will automatically be deleted. The phone is supposedly unlocked, and does seem to be so as it accepts the CC sim card and I am able to send and receive calls with it. It is now rooted using the one-click script by avicohh method.
As a side note, I also cannot send or receive text messages from anyone other than a friend who is on T-Mobile. I've contacted CC's tech support and they swear its the fact that the APN is still locked on the phone. I therefore plan to fix this problem so I can add the CC network's APN to see if it makes a difference on my phone.
I have since rooted the phone using the one-click method. I was even able to delete the T-Mobile APN entry by using a combination of BusyBox, /system/app mover, and APNManager apps. However this does not stop any APN without the T-Mobile MNC from being auto-deleted in Settings -> Mobile Network - APNs.
I have downloaded and installed the Android SDK suite in anticipation of flashing a rom onto the phone as a last resort fix. However, I cannot find a link to a rom for the D415 which I am certain does not contain the T-Mobile firmware and bloatware on it, neither on LG's website nor here.
I am hoping someone here has heard of this problem before and has an idea of what I can do to fix this frustrating APN problem caused by T-Mobile.
Have you tried this: http://forums.androidcentral.com/ve...41691-mod-add-apn-editor-system-settings.html
itskapil said:
Have you tried this: ...
Click to expand...
Click to collapse
I just tried it. No luck, but thank you for the link. Looks like it applied to the same problem, but solved it only for an older version of Android. It will not work with my phone which has Lolipop. My problem is that the new APN entries get auto-deleted, not that they are greyed out as that link described.
I have contacted LG and T-Mobile technical support, and they keep pointing fingers at each other and cannot help me. After much insistence, T-Mobile has suggested that I go into one of their stores to solve the problem, and if a support tech cannot help me there, then I should return the phone to the vendor, which is what I intend to do.
If anyone has a clue how to unlock the APN settings on this phone, please help!