Database Develop

[KERNEL][I9100G][2.3.5]MyGKernel - CWM5, Root, CIFS

Hi, this is my first compiled kernel for Samsung Galaxy S II I9100G. Compiled from Samsung's latest source code. Compatible with DZKI1 firmware.
No mods or optimizations yet - I just added CWM-based Recovery v5.0.2.6 I pulled from another kernel.
Credits:
nunon4 - for pointing out link to rooted kernel here - http://forum.xda-developers.com/showpost.php?p=18744675&postcount=85 - this was where I pulled the initramfs with recovery from
Unknown dev who created the above kernel
CLockworkmod developers
Disclaimer:
I'm not responsible for any damage to your phone, other properties or persons due to you using this kernel.
Everything seems to work for me, but I haven't fully tested it yet - please tell me if you have any problems.
Instructions:
1. Downloaded from the attached link.
2. Flash with Odin.
Changelog:
v0
Initial release - CWM5, Root
v1.1
added CIFS support - mount Windows shares using CifsManager from Market
removed debugging information from modules to reduce file sizes
v1.1.1
Bugfix - phone keeps booting into recovery in v1.1

You are a MAN!! Great job!!! looking forward for optimization.
Since it have CWM5, The custom ROM will follow now.

aidfarh said:
Hi, this is my first compiled kernel for Samsung Galaxy S II I9100G. Compiled from Samsung's latest source code. Compatible with DZKI1 firmware.
No mods or optimizations yet - I just added CWM-based Recovery v5.0.2.6 I pulled from another kernel.
Credits:
nunon4 - for pointing out link to rooted kernel here - http://forum.xda-developers.com/showpost.php?p=18744675&postcount=85 - this was where I pulled the initramfs with recovery from
Unknown dev who created the above kernel
CLockworkmod developers
Disclaimer:
I'm not responsible for any damage to your phone, other properties or persons due to you using this kernel.
Everything seems to work for me, but I haven't fully tested it yet - please tell me if you have any problems.
Instructions:
1. Downloaded from the attached link.
2. Flash with Odin.
Click to expand...
Click to collapse
thank for the Kernel... can this kernel overclock?

serge327 said:
thank for the Kernel... can this kernel overclock?
Click to expand...
Click to collapse
No, not yet.
Sent from my GT-I9100G using XDA App

Any chance of tweaking the charge rate in this kernel to allow the use of higher output chargers like the ipad charger that outputs 3 times the current of the stock one? The stock charge rate is locked to 650ma which is close to the output of the stock charger that came with the phone, regardless of which ac charger you use. Don't even mention the charge rate when plugged into a usb port.
my biggest gripe so far with this otherwise excellent phone.
Jacking up the limit to around 3000ma on both ac and usb, and letting the phone draw the maximum current that the adapter can supply would really speed things up.

bcky84 said:
Any chance of tweaking the charge rate in this kernel to allow the use of higher output chargers like the ipad charger that outputs 3 times the current of the stock one? The stock charge rate is locked to 650ma which is close to the output of the stock charger that came with the phone, regardless of which ac charger you use. Don't even mention the charge rate when plugged into a usb port.
my biggest gripe so far with this otherwise excellent phone.
Jacking up the limit to around 3000ma on both ac and usb, and letting the phone draw the maximum current that the adapter can supply would really speed things up.
Click to expand...
Click to collapse
Do you have an idea on how to go about doing that? I'm actually a novice in this modding business, so I can't really do any original mods, but I can try to incorporate mods that others have done, providing that instructions are provided.
Having said that, I'm actually reluctant to attempt mods that tamper with voltage or current settings like what you're proposing. Maybe there's a good reason Samsung has limited the charging current. I don't want to fry my phone.
For now, I'm looking at mods that improve functionality, like BLN or CIFS. Maybe some overclocking of the CPU/GPU at later stage once I have more understanding of the platform.

Already use it..awesome!! But after that I see a yellow triangle at boot...why?

lockmunk said:
Already use it..awesome!! But after that I see a yellow triangle at boot...why?
Click to expand...
Click to collapse
That's normal when you use custom kernels. It would disappear if you reflash with a stock kernel.

root your phone first, then install kernel flasher, then flash original kernel, and finally install this kernel via kernel flasher and you will won't see the triangle anymore.

jlieu said:
root your phone first, then install kernel flasher, then flash original kernel, and finally install this kernel via kernel flasher and you will won't see the triangle anymore.
Click to expand...
Click to collapse
i am new to android..can u teach me step by step?i dont understand this "install kernel flasher, then flash original kernel, and finally install this kernel via kernel flasher"

jlieu said:
root your phone first, then install kernel flasher, then flash original kernel, and finally install this kernel via kernel flasher and you will won't see the triangle anymore.
Click to expand...
Click to collapse
Kernel flasher hmm. Can i use app like Chainfire CWM app or Hellcat App the flash the zimage?

antt00 said:
Kernel flasher hmm. Can i use app like Chainfire CWM app or Hellcat App the flash the zimage?
Click to expand...
Click to collapse
I tried both those apps on my device. They didn't work.

So, just choose as PDA and click start?

i just installing miui rom.. but somehow.. my phone brick..
but is ok since i backup my current rom..
can anybody test flashing miui rom with this kernel?

So far so good. I'll keep monitoring for any bugs.
Good job for the Kernel too

mdrizal said:
i just installing miui rom.. but somehow.. my phone brick..
but is ok since i backup my current rom..
can anybody test flashing miui rom with this kernel?
Click to expand...
Click to collapse
Are you using G version phone? Also does Miui or any other custom rom for i9100 even work on i9100G?

thanks! great job as startings to the i9100G

G
antt00 said:
Are you using G version phone? Also does Miui or any other custom rom for i9100 even work on i9100G?
Click to expand...
Click to collapse
i don't think they are the same, so must wait longer so some dev to start with the G variant

can anybody test flashing miui rom with this kernel?
Click to expand...
Click to collapse
Just did, and it works.
This kernel is compatible with the latest MIUI (1.14.0), at least for me

I added CIFS support. Now you can use CifsManager or similar app to mount Windows shares. See first post.

[Q] how to remove cyanogenmod and return to stock rom??

hello friends i have installed cyanogenmod on my optimus 2x one week ago and now i want to teturn to my old original gingerbread stock rom that lg provided me. i didnt take nandroid backup of that rom. so pls guys help me as soon as possible. as give me brief details of updating thax in advance..

Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1035041&highlight=original
Find your firmware that fits to your country and provider. Download the file and read the instructions (link at the bottom of the first post).
After that, you'll have an untouched stock rom again (but why? )

If you have a Backup of the Stock ROM you could just restore from it.
But if you dont, you have to download your ROM and use SmartFlash.
You should try MIUI Roms if CMs a bit out of your taste.
Goodluck though!

xerol said:
hello friends i have installed cyanogenmod on my optimus 2x one week ago and now i want to teturn to my old original gingerbread stock rom that lg provided me. i didnt take nandroid backup of that rom. so pls guys help me as soon as possible. as give me brief details of updating thax in advance..
Click to expand...
Click to collapse
Can i know the reason why u want to go back to stock....?if it is to something specific....its ok...but if it is to change ROMs...then i can suggest something....

SREEPRAJAY said:
Can i know the reason why u want to go back to stock....?if it is to something specific....its ok...but if it is to change ROMs...then i can suggest something....
Click to expand...
Click to collapse
Feel free to suggest
Sent from my LG-P990 using XDA App

luka2858 said:
Feel free to suggest
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
Try the newer ROMs based on V20O....which will ofcourse require you to flash the Base Band V20M and the RIL recommended by GetRIL or LG RIL apps.
But, personally, I was happy with Thanatos 5.1, Blazing Dragon 2.1a, Django0.5ICS with spica's Kernel....all these gave me a minimum of 40hrs in battery performance and the device was very soft with movement with extremely few reboots and FCs in app openings.
Everything depends on ur satisfaction and feel.....Try these....I tried also the CM7 but changed....so try all the great work by developers....appreciate the fact that without these guys....this device would be uninteresting...
BRAVO DEVELOPERS of LG O2X

May I also ask - what ROM were you specifically using? Were you using CM 7.1 normal? Were you using some other CM7 based rom?
I recently made the switch from stock GB to tomasek's CM7 nightly based rom and I'm not going back - it's just heaps and bounds better than anything else I've tried.
If you have in fact tried a recent CM7 "Kang" build then please tell us what you found lacking.
To me there would only be one single reason to go back to stock - the LG widgets. I haven't found anything that works like the LG Memo widget anywhere else. (ie it's a widget, not only an app. You can also slide left/right to get the next/previous note. I haven't found anything that can do this). If someone pointed me at a similar widget then I'd be set.
But that aside, it's worth not having the LG widgets if it means getting all the other improvements of CM.
Another big point for me - Where do you think the first ICS roms will come from?
Very likely CM9. They are hard at work at it right now and looking at the progress document they're making huge steps every day.
So getting used to CM7.x now only means that it's easier to switch to CM9 (ICS) when it comes.
That's just my 0.02 of whatever currency you happen to be using.
// Stefan

yeah just flash a stock rom over it, and make a backup of your apps if you need to

SREEPRAJAY said:
Try the newer ROMs based on V20O....which will ofcourse require you to flash the Base Band V20M and the RIL recommended by GetRIL or LG RIL apps.
But, personally, I was happy with Thanatos 5.1, Blazing Dragon 2.1a, Django0.5ICS with spica's Kernel....all these gave me a minimum of 40hrs in battery performance and the device was very soft with movement with extremely few reboots and FCs in app openings.
Everything depends on ur satisfaction and feel.....Try these....I tried also the CM7 but changed....so try all the great work by developers....appreciate the fact that without these guys....this device would be uninteresting...
BRAVO DEVELOPERS of LG O2X
Click to expand...
Click to collapse
O i appreciate their work,spica1234 made kernels that made even stock rom good..
Sent from my LG-P990 using XDA App

Wheres my BEATS audio?
I have CYANOGENMOD loaded on my HTC ON SPRINT. Now my play store does not work.... And I seem to be stuck from downloading anything.
What the heck... Please help.... Been searching here for almost a week.
I a OK going wither way. Completing the CYANOGENMOD or returning to the STOCK ROM.:cyclops::fingers-crossed:
---------- Post added at 08:35 PM ---------- Previous post was at 08:26 PM ----------
eistmxcxc said:
Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1035041&highlight=original
Find your firmware that fits to your country and provider. Download the file and read the instructions (link at the bottom of the first post).
After that, you'll have an untouched stock rom again (but why? )
Click to expand...
Click to collapse
I see no thread for the USA. My HTC ONE SPRINT USA is not able to access the PLAYSTORE since my botched change to CYANOGENMOD.

[email protected] said:
I have CYANOGENMOD loaded on my HTC ON SPRINT. Now my play store does not work.... And I seem to be stuck from downloading anything.
What the heck... Please help.... Been searching here for almost a week.
I a OK going wither way. Completing the CYANOGENMOD or returning to the STOCK ROM.:cyclops::fingers-crossed:
---------- Post added at 08:35 PM ---------- Previous post was at 08:26 PM ----------
I see no thread for the USA. My HTC ONE SPRINT USA is not able to access the PLAYSTORE since my botched change to CYANOGENMOD.
Click to expand...
Click to collapse
Please don't post it here, just go to the HTC One thread. Are you sure you did install the gapps?

Gapps won't install
wouter-visser said:
Please don't post it here, just go to the HTC One thread. Are you sure you did install the gapps?
Click to expand...
Click to collapse
It says can't open file. ?

Anyone tried the CM10 M2 Experimental Build yet?

They posted the new M-series build yesterday. I tried to install it a couple of times, but the install failed using the latest TWRP. Maybe i'll try with ROM Manager and see what happens.

I installed it yesterday afternoon. Still testing it out, but it seems to be working so far.

hogasswild said:
I installed it yesterday afternoon. Still testing it out, but it seems to be working so far.
Click to expand...
Click to collapse
Are you using TWRP or CWM?

Techngro said:
Are you using TWRP or CWM?
Click to expand...
Click to collapse
I am using it and it is working fine. I installed via upgrade but the previous version was done with TWRP.
Sent from my SAMSUNG-SGH-T879 using Tapatalk 2

Working great. Flashed yesterday as soon as it came out.

no cellular...
M2 and all march builds, no audio in calls, call is active, can't hear anything. This is with uvma1 radio, also 2/28 nightly, have to roll back to 2/26 nightly to use the phone.

Where is the link? That I can try it out.
Thanks
Sent from my SAMSUNG-SGH-T879 using xda premium
---------- Post added at 02:16 PM ---------- Previous post was at 02:14 PM ----------
I got it!!! Downloading
I will let you know..
Thanks
Sent from my SAMSUNG-SGH-T879 using xda premium

Sent from my SAMSUNG-SGH-T879 using xda premium

Techngro said:
Are you using TWRP or CWM?
Click to expand...
Click to collapse
I actually used the built in CM10 updater. My recovery is TWRP. I didn't even wipe the phone. I did install the new gapps file first as they got released almost simultaneously and then flashed the experimental file.

hogasswild said:
I actually used the built in CM10 updater. My recovery is TWRP. I didn't even wipe the phone. I did install the new gapps file first as they got released almost simultaneously and then flashed the experimental file.
Click to expand...
Click to collapse
I think it might be the version of TWRP that I am using. I updated to the most recent 2.4.3 yesterday. I know that sometimes the older versions give less errors. Anyone who used TWRP care to tell me which version they are on?
I tried again using the CMupdater, but no good. Just gives me a bunch of errors.
Anyway. Maybe i'll flash CWM and see if it will work with that.

Techngro said:
I think it might be the version of TWRP that I am using. I updated to the most recent 2.4.3 yesterday. I know that sometimes the older versions give less errors. Anyone who used TWRP care to tell me which version they are on?
I tried again using the CMupdater, but no good. Just gives me a bunch of errors.
Anyway. Maybe i'll flash CWM and see if it will work with that.
Click to expand...
Click to collapse
Was the version of TWRP you installed specifically for the T879?
I thought we were still on 2.3.1.1.

fraughtsigewulf said:
Was the version of TWRP you installed specifically for the T879?
I thought we were still on 2.3.1.1.
Click to expand...
Click to collapse
Well...in the official TWRP forum thread, they said for us T-Mo Note users to use the i717 AT&T, so that's what I installed. Maybe i'll try rolling back to an older version if that's possible.

Just Google "twrp sgh-t879" and the first result is the official page for this device
http://teamw.in/project/twrp2/113
The top of the page says 2.4, but the links are for 2.3. Anyway, that is where I installed from.

When you search on TWRP site just type it "Sgh T879" and it should pop up

I do have one more question if anyone is still around.
There are new nightlies on Cyanogen's site (since the M2 release). Do those nightlies consist of everything included in the 4.2.2 M2 release, or are they just a continuation of the 4.2.1 nightlies?

Techngro said:
I do have one more question if anyone is still around.
There are new nightlies on Cyanogen's site (since the M2 release). Do those nightlies consist of everything included in the 4.2.2 M2 release, or are they just a continuation of the 4.2.1 nightlies?
Click to expand...
Click to collapse
Yes. They consist of everything in M2 plus continued new fixes/features and breakage depending upon what the devs are up to.

Yeah, it looks like the version of TWRP that I was using was the culprit. I rolled back to the one in the above post. and was able to flash the newest nightly.
Thanks for the help guys.

Three issues that seem to be recurring in the nightlies is whenever I put handcent in landscape, I can see another display behind the intended display. The other issue is that Bluetooth sometimes wants to turn itself off. The third issue is that a car dock icon shows up when I dock my phone in the car but no actual car dock software launches.

hogasswild said:
Three issues that seem to be recurring in the nightlies is whenever I put handcent in landscape, I can see another display behind the intended display. The other issue is that Bluetooth sometimes wants to turn itself off. The third issue is that a car dock icon shows up when I dock my phone in the car but no actual car dock software launches.
Click to expand...
Click to collapse
I have experienced the bluetooth issue, but not the others.
I switched back to the stock ROM anyway because CM10 wouldn't let me make calls properly.

Do you have an i717 or a t879? I haven't had issues with calling even with the loss of wifi calling.

[Q] Issues installing new ROMS after CM

Hey Guys,
I have P990 and I'm using CM10 nightly, and I really want to change ROM as this works really bad on my device.
I downloaded DjangoManouche X 1.6.1 and whenever I go to install, it goes through the first steps, then screen gets black and goes back to Clockwork Recovery. I tried with other ROMs and similar things happen.
What could it be?
Thanks|

Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app

xperia u20i said:
Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response.
Yes, I've wiped everything, I tried formatting everything, I did a factory reset, all of that

I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app

xperia u20i said:
I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Sorry for my ignorance,
how can I do that?

Oh also, I can install other CM ROMs, those are the only ROMs I can install...not other one!

With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app

xperia u20i said:
With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Ok, so a few things I haven't mentioned before, whenever I connect my phone VIA usb to my computer, nothing happens. I don't have the possibility to flash anything VIA USB, so what can I do?

Do you install all drivers?look in all in one tool section...there is everything...
Sent from my LG-P880 using xda app-developers app

if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)

60nine said:
if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)
Click to expand...
Click to collapse
I just installed CM7 stable, so what should I do now?

And how you did this?where was the problem?
Sent from my LG-P880 using xda app-developers app

why cm7?
---------- Post added at 09:02 PM ---------- Previous post was at 09:00 PM ----------
xperia u20i said:
And how you did this?where was the problem?
Click to expand...
Click to collapse
i explained his problem, but i still don't know why he installed a prehistoric cm7 instead one of the newer cm10.2 based roms

I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app

xperia u20i said:
I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Well, just because it's the only ROM I can install. Still want to upgrade, but I can't do anything. USB isn't working, ROM from external SD don't install...

don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers

occured kenblis
60nine said:
don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers
Click to expand...
Click to collapse
How is Cm10.2 working for you? Battery life/speed/etc
I had 10.1 I believe and it was horrible.
I can' install new bootloaders, etc...as I can't enter debug mode, nor do anything

just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
tom9191 said:
I had 10.1 I believe and it was horrible.
Click to expand...
Click to collapse
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)

I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
60nine said:
just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)
Click to expand...
Click to collapse

tom9191 said:
I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
Click to expand...
Click to collapse
omg...this is a puzzle (at least for me ,maybe some on can solve this in a snap,but it really seems complicated)
first, we need to resolved why smart flash won't recognize your device...than everything should go with no problems
---------- Post added at 11:19 PM ---------- Previous post was at 11:06 PM ----------
what color is INSTALL APX in aio toolkit...is it gray or is white like every thing else, when you connect phone?
if you have installed all drivers(lg united,nvflash drivers,apx,adb usb drivers...that is in tonyp basketbuild downloads in p990 staff-->various ) and if you are not did this: SU660 Users: Download Both P990 & SU660-AddOn packages. Run & extract the P990 first and then extract in the same folder the SU660-AddOn. AIO-Toolkit will be converted to support SU660 device
by mistake i really dont know where is problem...

[Q] Phone turns on when plugged on charger

Hello, my LT25i turns on, when I plug it on the charger in turnt off condition. I want to turn it off and charge it, when I go to bed. This behavior is since I updated it to Android 4.3 a few month ago.
Does anyone have a solution for it?
The phone is rooted, bootloader is open and Xposed Framework is installed.
Thank you!

I know that this happens with some custom roms, offline charging does not work.
Did you install a custom kernel?
If I'm not mistaking, the fixed NeoWave cm11 kernel doesn't have that problem.
I don't know if that is compatible with your rom though.

Knutselmaaster said:
I know that this happens with some custom roms, offline charging does not work.
Did you install a custom kernel?
If I'm not mistaking, the fixed NeoWave cm11 kernel doesn't have that problem.
I don't know if that is compatible with your rom though.
Click to expand...
Click to collapse
No, I have the stock Rom.

Does it really boot into the system, or only to the 'battery loading screen'? The latter is normal behaviour.
Sent from my LT30p using XDA Free mobile app