Hello,
i have installed the latest kernel. everything works O.K. but i don't get sound when someone calls me, it only vibrates. I even modified my startup file htc_hw.call_vol=4
but this doesn't work, and it gives error that htc_hw command not found.
I am using HTC Pure. any help please......
thank you in advance....
itout said:
Hello,
i have installed the latest kernel. everything works O.K. but i don't get sound when someone calls me, it only vibrates. I even modified my startup file htc_hw.call_vol=4
but this doesn't work, and it gives error that htc_hw command not found.
I am using HTC Pure. any help please......
thank you in advance....
Click to expand...
Click to collapse
Do you hear music when you play it through music player? Whats your device TOPAxxx?
Hi,
no, I don't hear anything. I am using the latest build 2.2 Froyo RC2.1
itout said:
Hi,
no, I don't hear anything. I don't know what you mean by, TOPAxxx
Click to expand...
Click to collapse
This is the device codename, its located under the battery?
Btw did you updated to the last kernel?
Thank you for helping me out.
I have updated to the latest kernel. I am using TOPA210
Can anyone please help me. I have tried everything I can think of, but no luck. I see that some people get sound.
Please help me....thank you
I have the same problem and im using the same device hTC Pure from at&t ...
TOPA200···isound work great！！
I also have topa 210 (Pure). I have found a way to ge a ringtone, but you would have to do the procedure after reboot. Also i have not found a way to get notifications or alarms yet. Hope I don't have to
1. boot into Andoroid
2. Open media scanner (You should be able to play music from your sdcard now!)
3. Using Astro file manager, navigate to sdcard/media/audio/ringtones
4. Select a ringtone you want to use (you can play it first).
5. Hold the File down until menu comes up
6. Select music options
7. Select set as ringtone
8. Enjoy!
If you look to see if your ringtones are selectable, they wil NOT be there. It will still say Silent, but the ringtone will still work. Try it out.
This is for Astro, but it may work with other programs
How to install Xloud zip,to CM music edition v .1.1>>>>
download it
paste on sd care
go to recovery mod
install zip from sd card
and flash
thank you i ll try do it
mv_style said:
download it
paste on sd care
go to recovery mod
install zip from sd card
and flash
Click to expand...
Click to collapse
Hi
Tried that and after installation I still dont find xLoud in sound config menu.
Any ideas on different ways or troubleshooting install?
vltakacs said:
Hi
Tried that and after installation I still dont find xLoud in sound config menu.
Any ideas on different ways or troubleshooting install?
Click to expand...
Click to collapse
Activation of xloud is on the buildprop not in the sound confg menu and after you flash it, it is already activated.
Sent from my GT-S5570 using XDA App
Meybe you need kill dsp managee?
By clockwork recovery
Choose zip from sd
And itstall it
Its automatically activated..
ENJOYYY!!!
sent via galaxyminipop.blogspot.com
installed but not working on my mini...
How should I install this mod? I have Zeus 6.1 ROM
[2.3.X][MOD] Beats Audio
http://forum.xda-developers.com/showthread.php?t=1525575
lughy13 said:
How should I install this mod? I have Zeus 6.1 ROM
[2.3.X][MOD] Beats Audio
http://forum.xda-developers.com/showthread.php?t=1525575
Click to expand...
Click to collapse
Download the flashable zip, copy it to SD card.
Boot into CWM Recovery (By pressing hard buttons when the phone boots)
Choose the option "install zip from sdcard"-->"choose zip from sdcard"
then choose the zip you copied to the SD card.
Reboot your phone.
Thanks
Thanks for the response. I did what you said. Installed successfully.
Should I see a new app installed? Or only the difference in sound?
No only difference is in the sound.
lughy13 said:
Thanks for the response. I did what you said. Installed successfully.
Should I see a new app installed? Or only the difference in sound?
Click to expand...
Click to collapse
The difference will be in sound.
If I help you, please click on the Thanks button.
I take no credit for this amazing equalizer. All credits go to @zhuhang and the people from his thread for the convolvers.
If you don't know what V4A is check here for more details.
But basically it's an audiophiles dream that can cause serious hearing loss and such audio enjoyment at the same time!
The Zip has all the files included to enable "neon" support for convolvers, which are also included.
The feedback I've received so far is 100% success.
INSTRUCTIONS:
1) DOWNLOAD THE ZIP
2) FLASH IN RECOVERY (no need to uninstall if you already have viper installed)
3) open the app and you will be prompted to install the drivers. (I always choose the top one, although it does consume more batter, we'll worth it)
The EQ can be either super simple with just the basic adjustments or can get really technical in "expert" mode.
To activate the convolvers hit the 3 dots in the top right and click click the "ui settings" and change it to expert
Current version Download and discussion starts here
UPDATE VERSION 2.4.0.1 Neon Enabled + Convolvers
If using my previous zip version a simple flash of the new zip will update your V4A.
If you are running any version other than the one in my previous zip you will need to follow the steps below to ensure a smooth update to 2.4.0.1.
1) uninstall current driver from Viper by selecting the option is the app or use file manager and delete "libv4a_fx_ics.so" from system/lib/soundfx.
2) wipe data app with application manager or TiBackup
3) uninstall your current V4A
4) Flash to new zip
5) boot up and enjoy
6) hit the thanks button.
old version
Viper4Android neon enabled including convolvers
Enjoy!
I am on AT&T Galaxy S6 so I cannot have a custom recovery. Can you flash the neon zip using Flashfire? It should work, correct?
Sent from my SAMSUNG-SM-G920A using XDA Free mobile app
It did not work. I ended up having to uninstall the drivers then reinstalling them. So any other way to get NEON working?
Sent from my SAMSUNG-SM-G920A using XDA Free mobile app
Bobthahog said:
It did not work. I ended up having to uninstall the drivers then reinstalling them. So any other way to get NEON working?
Sent from my SAMSUNG-SM-G920A using XDA Free mobile app
Click to expand...
Click to collapse
You flashed using flashfire? You could push the files from the Zip with a file explorer with root access and set permissions to the folders (rwxr-xr-x, 755) and files (rw-r--r--, 644).
You should have it like this
system/priv-app/ViPER4Android_FX_A4.x/lib/arm/libV4AJniUtils.so
system/priv-app/ViPER4Android_FX_A4.x/VIPER4Android_FX_A4.x.apk
system/etc/audio_effects.conf (rw-r--r--, 644)
Also if you a folder located in the system/priv-app/SoundAlive_30, delete or freeze it
I posted this same Zip in my rom thread and have confirmation from AT&T edge and S6 users.
I am having a strange issue on my G920F,
I had a previous version of Viper4Android installed which reported the driver status as normal, I then deleted that version completely because it was installed in the wrong priv-app folder.
I then installed this version via recovery and when I installed the driver it reports the drivers status as abnormal and doesn't even report the sampling rate (reports it as 0), even when installed manually.
stangdriver44 said:
You flashed using flashfire? You could push the files from the Zip with a file explorer with root access and set permissions to the folders (rwxr-xr-x, 755) and files (rw-r--r--, 644).
You should have it like this
system/priv-app/ViPER4Android_FX_A4.x/lib/arm/libV4AJniUtils.so
system/priv-app/ViPER4Android_FX_A4.x/VIPER4Android_FX_A4.x.apk
system/etc/audio_effects.conf (rw-r--r--, 644)
Also if you a folder located in the system/priv-app/SoundAlive_30, delete or freeze it
I posted this same Zip in my rom thread and have confirmation from AT&T edge and S6 users.
Click to expand...
Click to collapse
So, two things -
1) This zip contains a BUNCH of needless folders for what looks like other programs. while they are empty as far as i can tell, they make everything more cluttered (doubly so since they get copied over the the phone...).
2) If you stick with just the 3 files you list there, V4A works but still without NEON support. There is a fourth file however, that one brought over, is the culprit for breaking V4A; under /system/lib/ there is the libV4A_FX_ICS.so. If i replace this file with the one included in your ZIP, then sure enough, like the other powers, V4A goes into abnormal state and is broken until the old file is returned. I suspect you are missing something (or this file is wrong), given the hapazard nature of the entire zip itself....
I love you
For anyone else I had to flash this with flashfire.
If i used twrp I'd get the starting apps splash on loop.
Everything is running great here @stangdriver44!!!! Neon is working and status is normal and my ear drums are now blown out lol. Thanks for everything stang!!!
SwornXIII said:
For anyone else I had to flash this with flashfire.
If i used twrp I'd get the starting apps splash on loop.
Click to expand...
Click to collapse
Hummm, it flashed fine for me with twrp. But thanks a lot for confirming it will flash with flash fire though.
I have tried this option and various other options mentioned in other threads and getting no where. The most I can get with installing the app as userapp is drivers working without Neon and Convuler. I have no luck with this option and always get unsupported. Tried installing via flashfire, twrp and also manually copying files without luck. Also frozen sound_alive and Adapt sound.
Can anyone think of any other issues that I may have overlooked.
SwornXIII said:
For anyone else I had to flash this with flashfire.
If i used twrp I'd get the starting apps splash on loop.
Click to expand...
Click to collapse
Did you already have V4A installed or fresh install?
Sent from my SM-G920V using Tapatalk
I had V4A installed previously. I have tried installing this over existing V4A. Also tried uninstallin/deleting all files and then clean installing this. No luck.
Also, I am on stock kernel rooted with pingpong. I think SElinux is enforcing. I tried the SELinux changer but not sure if that works on samsung phones with knox.
Divine_Madcat said:
So, two things -
1) This zip contains a BUNCH of needless folders for what looks like other programs. while they are empty as far as i can tell, they make everything more cluttered (doubly so since they get copied over the the phone...).
2) If you stick with just the 3 files you list there, V4A works but still without NEON support. There is a fourth file however, that one brought over, is the culprit for breaking V4A; under /system/lib/ there is the libV4A_FX_ICS.so. If i replace this file with the one included in your ZIP, then sure enough, like the other powers, V4A goes into abnormal state and is broken until the old file is returned. I suspect you are missing something (or this file is wrong), given the hapazard nature of the entire zip itself....
Click to expand...
Click to collapse
Did some more reading - the secret sauce for people is needing to run this script:
http://forum.xda-developers.com/showpost.php?p=61242973&postcount=18854
Once done, the .so file i thought was bad works just fine....
Can confirm that above script is what was needed to get everything working fine. Now Neon enabled . Thanks all.
What is ""neon support for convolvers" ?! Thanks!
Schweet! Thanks for this @stangdriver44
this worked like a charm, I had a previous version that neon wasn't enabled on, I flashed this on top and lost Viper4A from my app drawer. I had to go in and delete the old version completely, then fight my way through fc's to reboot at which point I was good to then flash this version, happy to say neon is enabled! thanks for this
sent from my S6 using tapatalk
I flashed this zip and worked right out of the box. Thank you for finally enabling us to use the convolver
---------- Post added at 03:16 AM ---------- Previous post was at 03:14 AM ----------
There is one slight problem but I'm not sure if it's just me. I have a wide range of irs and when I select knew it works but when I select another it sounds exactly the same as the first knew and when I select another random irs it works. Anyone else have this issue
rshift said:
Did you already have V4A installed or fresh install?
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
Fresh
I fresh installed as well did exactly like it said with the 50viper.sh script and it works perfect. I love using the TRacks Wide.irs
Sent from my SM-G920V using Tapatalk
im trying to figure on how to add/change boot sounds ive tried alot of things but no go please help
Xnitro67 said:
im trying to figure on how to add/change boot sounds ive tried alot of things but no go please help
Click to expand...
Click to collapse
Go to root/system/media/audio/ui. Files should be called PowerOn.ogg and PowerOff.ogg.
cause of what rom im using it doesnt come with those files try adding them in and i dont get no sound.
edit power on just worked worked maybe cause i didnt have the right permissions?
edit 2 power off still doesnt work
Xnitro67 said:
cause of what rom im using it doesnt come with those files try adding them in and i dont get no sound.
edit power on just worked worked maybe cause i didnt have the right permissions?
edit 2 power off still doesnt work
Click to expand...
Click to collapse
Permissions should be 0644 and only (.ogg) files only.
yeah even at the right permissions power off doesnt work when i soft restart/shut off phone
Xnitro67 said:
yeah even at the right permissions power off doesnt work when i soft restart/shut off phone
Click to expand...
Click to collapse
You can tap the PowerOff file and play it with your music player to see if it has any sound or not. If it don't you can copy the PowerOn file to sd card and rename it to PowerOff as the file is the same or it could be one of the Rom settings stopping it from playing. Rom I'm using has settings to stop boot sound.
yeah it has sound my rom doesnt have sound settings just boot animation changes that are built in
Killerkat/dynamickat rom