i have galaxy ace gt-s5830OKAORA fully unlocked.
pda s5830bvkt4 phone s5830bvkt4 csc s5830orakt1 gingerbread 2.3.6 now i want to unbrand it from orange and turn it back to stock can i flash it using the (United Kingdom / Ireland - 2011 September - 2.3.6 - S5830XWKPY - S5830XEUKP1 ) firmware on the sammobile.com firmware page. If i can what is the best way of going about this. thanks in advance
Confused
Please Please Please can someone tell me whats going on, i flshed the above one file flash from sammobile and all went ok phone rebooted debranded etc lovely.
now on sam mobile they have two files within a few days of each other with exact same details:
GT-S5830 - United Kingdom / Ireland - 2011 24th September - Android 2.3.6 - S5830XWKPY ## - S5830XEUKP1
PDA: S5830XWPY
PHONE: S5830XWKPA
CSC: SS5830XEUKP1
gingerbread: 2.3.6
S5830XWKPY_S5830XEUKP1_XEU.zip
and
GT-S5830 - United Kingdom / Ireland - 2011 1st September - Android 2.3.3 - S5830XWKPY ## - S5830XEUKP1
PDA: S5830XWPY
PHONE: S5830XWKPA
CSC: SS5830XEUKP1
gingerbread: 2.3.3
S5830XWKPY_S5830XWKPA.zip
yet both files are identical
i Factory reset/ clear cache then flashed the S5830xwkpy_s5830xeukp1_xeu (24th 2.3.6)---->
result check phone info after reboot and Factory reset/ clear cache and it says gingerbread 2.3.3
very confused
i would just like to know if it was some thing i did or if both files are i fact 2.3.3
the phone i flashed was origially
PDA:S5830BVKT4
PHONE:S5830BVKT4
CSC:S5830ORAKTI
fully unlocked
amiga72 said:
Please Please Please can someone tell me whats going on, i flshed the above one file flash from sammobile and all went ok phone rebooted debranded etc lovely.
now on sam mobile they have two files within a few days of each other with exact same details:
GT-S5830 - United Kingdom / Ireland - 2011 24th September - Android 2.3.6 - S5830XWKPY ## - S5830XEUKP1
PDA: S5830XWPY
PHONE: S5830XWKPA
CSC: SS5830XEUKP1
gingerbread: 2.3.6
S5830XWKPY_S5830XEUKP1_XEU.zip
and
GT-S5830 - United Kingdom / Ireland - 2011 1st September - Android 2.3.3 - S5830XWKPY ## - S5830XEUKP1
PDA: S5830XWPY
PHONE: S5830XWKPA
CSC: SS5830XEUKP1
gingerbread: 2.3.3
S5830XWKPY_S5830XWKPA.zip
yet both files are identical
i Factory reset/ clear cache then flashed the S5830xwkpy_s5830xeukp1_xeu (24th 2.3.6)---->
result check phone info after reboot and Factory reset/ clear cache and it says gingerbread 2.3.3
very confused
i would just like to know if it was some thing i did or if both files are i fact 2.3.3
the phone i flashed was origially
PDA:S5830BVKT4
PHONE:S5830BVKT4
CSC:S5830ORAKTI
fully unlocked
Click to expand...
Click to collapse
Do you know the baseband version of your device?
Sent from my GT-S5830 using xda premium
AndroidMasters said:
Do you know the baseband version of your device?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Before flashing when it was on orange it was
Baseband Version:
S5830BVKT4
Kernal Version:
2.6.35.7-perf-CL816932
[email protected]#1
Build Number:
Gingerbread.BVKT4
Now After Flashing Stock XEU (which was ment to be 2.3.6) it is
BaseBand Version:
S5830XWKPA
Kernal Version:
2.6.35.7-perf-CL561786
[email protected]#1
Build Number:
Gingerbread.XWKPY
If i check on kies it says the software is the latest.
amiga72 said:
Before flashing when it was on orange it was
Baseband Version:
S5830BVKT4
Kernal Version:
2.6.35.7-perf-CL816932
[email protected]#1
Build Number:
Gingerbread.BVKT4
Now After Flashing Stock XEU (which was ment to be 2.3.6) it is
BaseBand Version:
S5830XWKPA
Kernal Version:
2.6.35.7-perf-CL561786
[email protected]#1
Build Number:
Gingerbread.XWKPY
If i check on kies it says the software is the latest.
Click to expand...
Click to collapse
www.themythace.com
Go to that site and download the firmware of your region what have or your phone originally what have.and flash it from odin.these are the firmware that unrooted and original files.
But why you have to that firmware?
I mean many boatware and some unwanted files are in that firmware which makes your phone a little slow down.
Try stocklite 7 its a stock rom and much better battery life and performance.
Hit thanx if i helped you.
Sent from my GT-S5830 using xda premium
My wife likes the stock xeu firmware it was a one package full write and phone is working lovely, i had a look at myth but not ready to start playing with roms just yet. i just wanted to know if the xeu firmware i flashed is definately 2.3.3 , i managed to answer my own question as i download both files 2.3.6 and 2.3.3 and did a binary compare and both files were identical so i guess the xeu version of 2.3.6 hasn`t been released yet.
Related
Good Day guys,
I would like to upgrade firmware via samsung kies to 2.3 gingerbread, but I am looking for my countries stock froyo rom info and download if possible so I can flash it using Odin and then upgrade.
I got a hold of my buddy here in Cape Town South Africa and his Froyo details are below. If someone can guide me directly to get the files like the info below I will really appreciated.
FIRMWARE VERSION: 2.2
BASEBAND VERSION: P1000XXJK5
KERNEL VERSION: 2.6.32.9 [email protected]#1
BUILD NUMBER: FROYO.XWJJ7
Where can I find the above PDA, CSC and Modem file please.
PDA1000XWJJ7
Phone: P1000XXJK5
CSC: P1000XFAJJ1
I also found the following info:
123547380 GT-P1000 XFA (SOUTH AFRICA)
P1000XWJJ7 P1000XFAJJ1 P1000XXJK5 P1000XWJJ7
2010/11/24 16:51
PDA: P1000XWJJ4 CSC: P1000XFAJJ1 PHONE: P1000XXJID S. AFRICA
FYI, Im sorry i did not note down the stock rom I had on the device before flashing away and never backed up as well.
You guys are great and sam firm ware does not provide me with the rom for South Africa.
bump anyone to help me out please
Hi daatjie,
I have 2 Galaxy tab 7", and I am from ZA.
If someone would tell me how to backup the PHONE, PDA & CSC, i would gladly supply them
Hi,
I'm in France and have got a new GN with these caracteristics:
Band : N7000OXXKK5
Kernel: 2.6.35.7.N7000XXKKA-CL726566
Version: GINGERBREAD.XXKKA
The product code is : GT-N7000RWEATO
I am searching for the stock rom, because after samsung update to :
PDA : N7000XXLA6,
PHONE: N7000XXLA4
CSC: N7000OXXLA1,
I lost root.
Could I use orther rom like the Austrian one (same PDA (N7000XXKKA), CSC (N7000OXXKK5) but different product code(GT-N7000ZBAATO)) to flash my phone
Thank you.
phamchau79 said:
Hi,
I'm in France and have got a new GN with these caracteristics:
Band : N7000OXXKK5
Kernel: 2.6.35.7.N7000XXKKA-CL726566
Version: GINGERBREAD.XXKKA
The product code is : GT-N7000RWEATO
I am searching for the stock rom, because after samsung update to :
PDA : N7000XXLA6,
PHONE: N7000XXLA4
CSC: N7000OXXLA1,
I lost root.
Could I use orther rom like the Austrian one (same PDA (N7000XXKKA), CSC (N7000OXXKK5) but different product code(GT-N7000ZBAATO)) to flash my phone
Thank you.
Click to expand...
Click to collapse
Product Code nothing to do with ROM.. U can flash it. only thing is you wont get OTA updates and from Kies too. u need to update using Odin.
Thank you for your answer.
I would like to downgrade to the old Rom, root it, then update through Kies while keeping root by OTA RootKeeper.
Is there any way to do it for my actual Rom?
i have a galaxy note once rooted i then found out about (ICS) so i came on this site and found a post with a bunch of stock roms on it and used one to flash my phone back to a stock unrooted state its all working 100% fine except one thing. i can not update my firmware through the phone and-or kies. It says your device does not support software upgrading via kies any help would be much appreciated
i used ODIN to flash the firmware and a Rom from this post
http://forum.xda-developers.com/showthread.php?t=1424997
i used this ROM - N7000XXKKA ------ 2.3.6 2011 November------- N7000CPWKK3 -----------United Kingdom (Carphone Warehouse)----- Download
as i live in the UK
my phone is now running
android version : 2.3.6
base band version N7000XXKK5
Kernel version
2.6.35.7-N7000XXKKA-CL726566rootELL87#2
build number Gingerbread.XXKKA
added info
PDA: N7000XXKKA
PHONE: N7000XXKK5
CSC: N7000CPWKK3
try to flash a rom from the category Latest Not Directly Rootable - see post#2 & #3 that says open (europe or another country).Yours is locked in a network from what i understand.Try a OPEN ROM,it is not locked and it should work.
good luck and let me know what you did.
Can I flash this Stock ICS ROM on my phone safely or it would be ruined because the rom is for a different PDA and CSC?
N7000JPLPD-------4.0.3------------2012 June-----------N7000OJPLP7----United Arab Emirates
Code:
about phone
android version: 2.3.5
baseband version: N7000XXKJ4
kernel version: 2.6.35.7-N7000JPKJ4-CL694210 [email protected] #2
build number: GINGERBREAD.JPKJ4
*#1234#
PDA : N7000XXKJ4
phone: N7000XXKLPT
CSC : N7000JPKJ3
i went ahead and flashed it without wiping ... gave me trouble so I wiped... it's ok now...
May a mod close this thread, Please...
Hello everyone
I have suffered after the last update from NETWORK CONTROL KEY LOCK which has been solved thankfully
but I have sacrificed the stability of the firmware
My Q is
is the Lybia Stock ROM
GT-N7000 - Libya
PDA: N7000JPLR8
CSC: N7000OJPLR8
Version: 4.0.4
Date: 2012-09-03
Regions: Arabic
going to LOCK my phone like ... the
GT-N7000 - Germany
PDA: N7000XXLRQ
CSC: N7000DBTLRQ
Version: 4.0.4
Date: 2012-08-29
????? and does it have the new touchwiz UX???
thank you everyone!
I can only say, wish you luck there bud. As far as i can say no report yet here in question and answer.
am_akshar said:
Hello everyone
I have suffered after the last update from NETWORK CONTROL KEY LOCK which has been solved thankfully
but I have sacrificed the stability of the firmware
My Q is
is the Lybia Stock ROM
GT-N7000 - Libya
PDA: N7000JPLR8
CSC: N7000OJPLR8
Version: 4.0.4
Date: 2012-09-03
Regions: Arabic
going to LOCK my phone like ... the
GT-N7000 - Germany
PDA: N7000XXLRQ
CSC: N7000DBTLRQ
Version: 4.0.4
Date: 2012-08-29
????? and does it have the new touchwiz UX???
thank you everyone!
Click to expand...
Click to collapse
Hi there,
Can't say much on your Q if your phone's going to be unlock if you flash the LRQ firmware but this much I can say. If you bought your phone lock originally to your carrier, upgrading it MIGHT lock your phone (not 100% sure though).
and YES the new LRQ firmware does have some touch of touchwiz UX (with some fancy Gallery 3D to match it with).