I tried to update my SGS to android 2.2 through kies wihtout puting my phone in to recovery mode. The firmware seems to be lost and the device cannot boot only give me a black screen with word samsung galaxy s GT I9000 wrote on it.
Iam very new in android devices please help me. I do not know what I should to do..
Mine did the same thing when I flashed with Kies.
Try this: Hold Volume UP, Home button and on/off button together until a screen with a few options appears. Select Wipe/factory reset from the list using the volume up/down button. Select ok and reboot. You will loose all your data but your phone will work again.
aviatorshar3an said:
I tried to update my SGS to android 2.2 through kies wihtout puting my phone in to recovery mode. The firmware seems to be lost and the device cannot boot only give me a black screen with word samsung galaxy s GT I9000 wrote on it.
Iam very new in android devices please help me. I do not know what I should to do..
Click to expand...
Click to collapse
BTW You did the upgrade the right way. With Kies you don't need to go into recovery or download mode before flashing. Follow the previous posters instructions and if that doesn't work you'll need to search around here more, for other flashing methods or just to find out if your internal sdcard is dead.
For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:
You should flash your tab and install a new firmware that's the only solution
omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...
Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App
to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..
Oké gona try it when i get home
Sent from my X10i using XDA App
jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App
thx for all the help. took me couple of hours but got it running again on andriod 2.3.3
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.
Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2
Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
I doubt you will ever get Kies to work with custom ICS rom in your tab.
priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?
who knows Samsung has catch up, then I will be caught out.
kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.
Sorry if this kind of thread is posted somewhere else already, but i've spent a lot of time but failed finding the solution to this problem.
Rooted for the first time, worked fine, installed ROM MANAGER, too, to create a backup, tried installing CLOCKWORKMOD from recovery, but since after that, my phone is stuck on the initial screen showing "SAMSUNG GALAXY ACE GT-S5830i" [Maybe this is SOFT BRICK]
I AM able to enter recovery mode, tried factory reset, unroot, etc but of no use.
PLEASE could anyone help me.? (And I've no idea of ODIN)
Please please help.
Get an idea of odin, then use it. It's different for 5830i (1.85 is the version u need)
And try to stay away from rom manager.
bharatramnani said:
Sorry if this kind of thread is posted somewhere else already, but i've spent a lot of time but failed finding the solution to this problem.
Rooted for the first time, worked fine, installed ROM MANAGER, too, to create a backup, tried installing CLOCKWORKMOD from recovery, but since after that, my phone is stuck on the initial screen showing "SAMSUNG GALAXY ACE GT-S5830i" [Maybe this is SOFT BRICK]
I AM able to enter recovery mode, tried factory reset, unroot, etc but of no use.
PLEASE could anyone help me.? (And I've no idea of ODIN)
Please please help.
Click to expand...
Click to collapse
U're lucky to have it just soft bricked. Many others have completely hard bricked their phones.
Download stock firmware & flashguide for S5830i from www.samfirmware.com
And pls. For phone's sake... Don't use Rom Manager ever again.
***HAPPY DIWALI***
Sent Via XDA™ Premium
My Galaxy Tab P1000 running on Android 2.3.3 is having issue with the touch screen. Sometimes it works, but sometimes it doesn't. I had to reboot many times with no different, it will only work for a few seconds. And if you leave it like that, and come back after 20 minutes or so it, but just for a second . Why is it doing this? I tried factory reset, but the same problem persist. then I tried odin3 with my stock rom but nothing change , then the overcome solution with GB-Stock-safe-v5 rom following the instruction.it is still the same so please any help ??
Hi everyone. I have a rooted Galaxy Note 1. I accidentally tried to update something (the phone said there was an Android update or something) and now my phone in stuck in a bootloop showing the Android logo. When I try to reset it (volume+home+power buttons) it goes to an Odin "Downloading..." screen and gets stuck on that.
I've seen some stuff about unbricking the phone using Odin to return to the original stock rom. But from what I can tell, there are different stock roms available depending on your Country Sales Code (CSC). So apparently I need to look in Kies for my CSC to know which rom to download, but Kies doesn't recognise the phone, I guess because it's bricked. I know the phone is from the UK, but I don't know what network it came from (I bought it second hand). All I know is that it is unlocked now.
I have CWM.zip, CWM-SuperSU-v0.87.zip, and franco.Kernel-r5.zip on the micro SD card from when I was rooting it ages ago. Do these have anything to do with fixing it?
Any ideas on where I go from here? Thanks for your help.
Which volume button did you press ? You need volume up + home + power to get into recovery.
You can flash any rom from any region using odin.
Same problem
Hey,
Thanks for helping me in advance...
I used the Custom ROM (( http://forum.xda-developers.com/showthread.php?t=1970626 )) Ultimate N7000 for a long time. However this build became more and more unstable the longer I used my phone.
So I decided to go back to STOCK.
So I followed this guide: http://forum.xda-developers.com/showthread.php?t=1424997
And everything went well (Odin didnt give any errors)
However after reboot... the problem began... I cant turn my phone on anymore.... It seems to be stuck in a bootloop....
How can I fix this?? please help me
Which rom did you flash? If you flashed JB, boot into recovery and wipe data. Then reboot.