The phone is able to Enter the S/w UPDATE mode and able to flash using SmartFlashTool
I upgraded to 20B then 10a All flashing was ok. But phone stuck on a BLANK screen with unlimited keys blinking !!
I check SCREEN is 100% ok !!
zakiyy said:
The phone is able to Enter the S/w UPDATE mode and able to flash using SmartFlashTool
I upgraded to 20B then 10a All flashing was ok. But phone stuck on a BLANK screen with unlimited keys blinking !!
I check SCREEN is 100% ok !!
Click to expand...
Click to collapse
To to reboot to recovery via "adb reboot recovery". If this isnt working, how about flashing another ROM again? And did you try emergency recovery in B2C tool?
zakiyy said:
The phone is able to Enter the S/w UPDATE mode and able to flash using SmartFlashTool
I upgraded to 20B then 10a All flashing was ok. But phone stuck on a BLANK screen with unlimited keys blinking !!
I check SCREEN is 100% ok !!
Click to expand...
Click to collapse
Upgrade to v20n/o/s??It could also be a bad flash or the firmware has a problem.
My main agenda is to help, not gain thanks.
UniversalSS said:
Upgrade to v20n/o/s??It could also be a bad flash or the firmware has a problem.
My main agenda is to help, not gain thanks.
Click to expand...
Click to collapse
Ok will try to flash using other firmware !! and will POST !!!
N00BY0815 said:
To to reboot to recovery via "adb reboot recovery". If this isnt working, how about flashing another ROM again? And did you try emergency recovery in B2C tool?
Click to expand...
Click to collapse
Nothing i try i try only smartflasher tool!!!
N00BY0815 said:
To to reboot to recovery via "adb reboot recovery". If this isnt working, how about flashing another ROM again? And did you try emergency recovery in B2C tool?
Click to expand...
Click to collapse
Thx a lot BRo it WORKED !! b2c tool !! But me i have another problem where the backlight of the screen only is lighting !! But phone NOw is working !! you can hear the SOUND when it rings,,,
Any hardware suggestion ? NO display WAYS? I have tested the screen with another PCB and the screen is GOOD !!
zakiyy said:
Thx a lot BRo it WORKED !! b2c tool !! But me i have another problem where the backlight of the screen only is lighting !! But phone NOw is working !! you can hear the SOUND when it rings,,,
Any hardware suggestion ? NO display WAYS? I have tested the screen with another PCB and the screen is GOOD !!
Click to expand...
Click to collapse
How about OnScreenPhone (OSP)? It is a LG software, which allows you to control your phone from your PC, without using the display of the phone. See reference here: http://www.youtube.com/watch?v=Y_1P1ELNz9g
Another PCB? what do you mean with this?
N00BY0815 said:
How about OnScreenPhone (OSP)? It is a LG software, which allows you to control your phone from your PC, without using the display of the phone. See reference here: http://www.youtube.com/watch?v=Y_1P1ELNz9g
Another PCB? what do you mean with this?
Click to expand...
Click to collapse
He means what most people would usually call mainboard xD
They're all PCBs - Printed Circuit Boards
Btw, if the phone boots, and the display can work on another device...
I never disassembled my OB, but does it have any flex cable pluging the PCB to the LCD? Did you check it? Does the LCD have background light but not contents?
zakiyy said:
The phone is able to Enter the S/w UPDATE mode and able to flash using SmartFlashTool
I upgraded to 20B then 10a All flashing was ok. But phone stuck on a BLANK screen with unlimited keys blinking !!
I check SCREEN is 100% ok !!
Click to expand...
Click to collapse
My OB is like this too after flashing a custom rom. I flashed a stock rom using LG updater and booted successfully but still no display. I can hear sounds, I can connect to LG On-screen Phone, the signal is working fine but I cannot received any call and text msgs. I tried flashing using smart tool and successfully flashed a stock rom but when turned on the phone is just blank and leds are flashing. I tried replacing my LCD but technician said the LCD is fine but still no display..
display blank and touch not responding
Hi my LG p970,s display becomes black and touch not responding.I flash phone via smartflash and and lg support with upgrade recovery.but display always blank .what can I do
Related
hello everybody. i have problem... today i restart my lg ob after changing theme in nova script(i had nova v8) and after this restart phone does not goes to the system. Its restarts normal, i saw lg logo but after that, instead of bootanimation i saw black screen with blinking touch keys(menu, home, back, search). I pulled of battery for few seconds and put it back...turn on phone and...the same... :/ next i goes to emergency recovery and flash nova8 again and guess what? still the same!!!! after lg logo black screen with blinking touch keys! i tried to flash stock s/w with kdz updater, i tried 10a and 10e version and still the same! do u have maybe some other ideas how can i try to flash this that would maybe help me? or maybe i have to sent phone to service?
sorry for my english
Try factory-reset via recovery.
miticogirl said:
Try factory-reset via recovery.
Click to expand...
Click to collapse
but now i dont have nova or cwm recovery ;/
try hard reset (search for it )
Download LGMobile Update http://forum.xda-developers.com/showthread.php?t=1111771 in this Update Kit. Then turn of phone, pull of battery and press and hold Vol+ button and plug in USB and then in LGMobile Update click on "Custommer Support" and Recovery Phone. Write your IMEI and click check. It can take a lot of time because it will download a new firmware.
fatcobrah said:
try hard reset (search for it )
Click to expand...
Click to collapse
how can i do hard reset if my phone does not boot to system? i tried software recovery in lg mobile update but it does not helped too ;/
miticogirl said:
Download LGMobile Update http://forum.xda-developers.com/showthread.php?t=1111771 in this Update Kit. Then turn of phone, pull of battery and press and hold Vol+ button and plug in USB and then in LGMobile Update click on "Custommer Support" and Recovery Phone. Write your IMEI and click check. It can take a lot of time because it will download a new firmware.
Click to expand...
Click to collapse
yep..i've done this twice but no luck ;/
Send phone to service, they will change your mainboard or they will give you new phone.
yeaa..thought the same... thanks for answers !
dzynio said:
yeaa..thought the same... thanks for answers !
Click to expand...
Click to collapse
try with KDZ Updater...
dzynio said:
yep..i've done this twice but no luck ;/
Click to expand...
Click to collapse
nah, keep on holding that volume up then plug in the USB. have you installed the USB drivers?
Turn your phone off. Use eRecovery! Turn phone on then repeatedly hit Vol Down key then do factory reset. If no luck use KDZ updater.
gabwerkz said:
nah, keep on holding that volume up then plug in the USB. have you installed the USB drivers?
Click to expand...
Click to collapse
yes, i plug usb cable to device with holding vol+ and 'sw upgrade, please wait...' screen appear. I tried again few minutes ago with kdz updater and via lg mobile update phone recovery and no luck. Phone is rebooting (black screen with blinking touch keys) when installing software on 90% ;/ of course installing software goes to 100% and says its completed and ok, but phone reboots on 90% ;/. I have installed all drivers, i tried on my laptop (win7) and my dad (win xp).
dzynio said:
yes, i plug usb cable to device with holding vol+ and 'sw upgrade, please wait...' screen appear. I tried again few minutes ago with kdz updater and via lg mobile update phone recovery and no luck. Phone is rebooting (black screen with blinking touch keys) when installing software on 90% ;/ of course installing software goes to 100% and says its completed and ok, but phone reboots on 90% ;/. I have installed all drivers, i tried on my laptop (win7) and my dad (win xp).
Click to expand...
Click to collapse
it's normal reboot on 90% and next go to 100%, i do that with windows XP and work...
fortunat0 said:
it's normal reboot on 90% and next go to 100%, i do that with windows XP and work...
Click to expand...
Click to collapse
so maybe its normal, but really...i've tried a couple of times with kdz and phone recovery by lg mobile and still the same, black screen, blinking touch keys. And i dont have eRecovery any more beacause i flashed stock s/w but it dont work ;/
that's a big hello of a problem.... I jonno what else u can do... if I were u then I would flash it again and again... then maybe for the customer care center... although I think ur warranty is being voided so u will not be able to repair it for free... let's hope for the best and let us know what happens next... best of luck...
Przykro ki kolego, nie naprawisz tego sam. Musisz odeslac telefon do serwisu LG w Mławie...
Sorry pal, you can't fix it yourself. You must send it to LG service centre in Mława (Poland)...
Sent from my LG-P970 using XDA Premium App
shourov said:
that's a big hello of a problem.... I jonno what else u can do... if I were u then I would flash it again and again... then maybe for the customer care center... although I think ur warranty is being voided so u will not be able to repair it for free... let's hope for the best and let us know what happens next... best of luck...
Click to expand...
Click to collapse
+1 for this. Flash and flash. Try upgrading to V10E via KDZ. Me thinks it's a bootloader problem. Does LG SECURITY TEAM appears or not?
Sent from my LG-P970 using xda premium
yeah..i flashed this several times...with kdz updater and by lg mobile update->phone recovery. I flashed 10A and 10E...results the same. I dont know how LG SECURITY TEAM looks like but i didnt see anything else besides LG LOGO--> Black screen with blinking touch keys and just Black screen with blinking keys (even without lg logo). I give up with this, there is no hope for this phone i think, today im sending this to the service. Thanks for helping me i will certainly write here what happend if i get phone back
I also stuck on the same thing
Really for that reason i hate LG Black
Hi Guys!
Yesterday I change the Sim Card on my phone. I power off it normaly and change the SIM. When I try to boot the phone again this didn't boot.
My case is the same as in this video, but I did not try to flash the device before (In the explanation of the video, the user says that he tried to flash a custom rom, In my case it was the original rom)
I had to attach a txt with link to Youtube (sorry)
I try to Flash with Odin. Apparently Odin flash the device correctly (with de original firm). But the result is the same, don't boot.
Anyone else did the same?
Is the display turning on?
If yes, where does it hang?
If no, it's a hardbrick and your ace is dead.
Sent from my GT-S5830 using Tapatalk 2
(Frank) said:
Is the display turning on?
If yes, where does it hang?
If no, it's a hardbrick and your ace is dead.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Yes, the display turn on (same as you watch in the end on the vídeo); the device turn on the screen and then turn off (< 1 sec) and don't shown nothing (No Samung Logo or Galaxy ACE...) . But the phone boot in "downloading ..." mode and "RAMDUMP" mode.
Thanks for your reply :good:
gokuhs said:
Yes, the display turn on (same as you watch in the end on the vídeo); the device turn on the screen and then turn off (< 1 sec) and don't shown nothing (No Samung Logo or Galaxy ACE...) . But the phone boot in "downloading ..." mode and "RAMDUMP" mode.
Thanks for your reply :good:
Click to expand...
Click to collapse
Do you reach revovery? Home+power button. If yes, do a factory reset, and reboot. It should work.
If this doesen't help try flashing this firmware with odin XWKB7. It's 2.2.1 Froyo (4 files and multi-CSC, how to: http://droidangel.blogspot.hu/2011/05/samsung-galaxy-ace-s5830-original-stock.html), and after that flash a 2.3.6 firmware.
kmarci said:
Do you reach revovery? Home+power button. If yes, do a factory reset, and reboot. It should work.
Click to expand...
Click to collapse
No, the phone don't boot in recovery.
I like to try the first firmware in the first link (to hotfile) but it's down. Can you send me in a PM? Thanks!
gokuhs said:
No, the phone don't boot in recovery.
I like to try the first firmware in the first link (to hotfile) but it's down. Can you send me in a PM? Thanks!
Click to expand...
Click to collapse
I'm working right now, so I can not open a lot of sites. Use google, search for XWKB7. I guess, you will find a working link.
kmarci said:
I'm working right now, so I can not open a lot of sites. Use google, search for XWKB7. I guess, you will find a working link.
Click to expand...
Click to collapse
Yes, sorry I use google and I find them. And I flashed with Odin and he situation did not change. The phone don't boot. .
Tanks for your Replies!
i think as per your comments....your phone's hardware is damaged internally...as you have no try to flash a rom...how is it possible ? to brick a phone ? go to samsung service center and get it repaired...
asking said:
i think as per your comments....your phone's hardware is damaged internally...as you have no try to flash a rom...how is it possible ? to brick a phone ? go to samsung service center and get it repaired...
Click to expand...
Click to collapse
Yeah, maybe that's the right way. Bring it to the service, but do not tell them anything about odin and firmwares, even about sim card. Just tell them that you used the phone it suddenly stop responding than turn itself off, and since than you cannot turn it on... Or something like that.
Thanks guys!
This afternoon I will send the phone to Samsung to give me budget...
Thanks for your replies!
please help me i have flashed using convert kdz and flashed by SFT.. my phone now not working.. no power any thing... what i do now ???:crying:
remove the battery, enter in s/w update mode and reflash whith SFT but with a good rom.
=> http://forum.xda-developers.com/showthread.php?t=1448803
rom V20O => http://forum.xda-developers.com/showpost.php?p=23788913&postcount=170
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Edvin73 said:
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
Click to expand...
Click to collapse
maybe something wrong i did but sft tool completed flash my phone i think my kdz file was wrong maybe... i give it to mobile repair center today and he also said that phone is totally dead not detecting to pc, now he will check motherboard... tomorrow i will know...
i am talking about LG P970
anyway i have SE Arc S also.
N00BY0815 said:
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
N00BY0815 said:
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
Click to expand...
Click to collapse
yes m sure.
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Well, the phone goes in bootloop when you flash patched files with recovery and then forget to flash Superuser.You must not boot your phone when it enters in recovery after flashing with SFT but flash Superuser from your SD card first.I think that this maybe was your first problem.But LG logo and flashing leds are also a very possible sign for a faulty motherboard.The same happened to me with one week old P970 with official firmware and not rooted, when I tried just to reboot the thing.And if your phone died after this, you can be 99.9% sure that you have a fu.ked motherboard.
I bought a Optimus Black and i wanted to delete old account, so i reseted all phone options in settings. After that phone turned off for 5 seconds and turned on with LG logo and flashing keys. And it's not end. The only thing i can do is turn to SW Uptade Mode, when i pushing Volume up button and connect with USB to my computer. SmartFlashTool didn't work, B2CAppSetup.exe don't want install. Can I do anything else? Is it BootLoader broken?
i dont know what is B2CAppSetup.exe but if you want to run smart flash, you should install usb drivers first.
Look this page for drivers. http://www.lg.com/tr/telefon-destegi/lg-P970-LG-Optimus-Black
sorry, B2CAppSetup.exe is LGMobile Support Tool. I have USB drivers, and Smart Flash worked corretly (i think, there is a text on green background "... completed" at the end), but phone reseted and still have a bootloop.
you flashed cwm integrated bin file?
if so, after opening cwm, did you make wipe data?
if you didnt, it will bootlop
I did everything according to the tutorial http://forum.xda-developers.com/showthread.php?t=1448803 and i can't open the cmw.
try this
it is cwm integrated bin and fls files
flash with smart flash tool
after flash, cwm opens automaticaly
after that choose wipe data
and reboot phone
file:
https://disk.yandex.net/disk/public/?hash=sPnNJSqSh335zrKG2UqvShqsFObIvbeSYUAdqAl0n+I=&final=true
it;s not working, after flash there is only LG logo and buttons flash faster...
dakolech said:
I bought a Optimus Black and i wanted to delete old account, so i reseted all phone options in settings. After that phone turned off for 5 seconds and turned on with LG logo and flashing keys. And it's not end. The only thing i can do is turn to SW Uptade Mode, when i pushing Volume up button and connect with USB to my computer. SmartFlashTool didn't work, B2CAppSetup.exe don't want install. Can I do anything else? Is it BootLoader broken?
Click to expand...
Click to collapse
Please I dont wanna make fun of you, but I already saw it once on another forum.So please make sure to have a P970 and not any other phone. Otherwise you ll never be able to recover, if you use the wrong files
i'm sure i have i LG P970
dakolech said:
it;s not working, after flash there is only LG logo and buttons flash faster...
Click to expand...
Click to collapse
If it still doesn't work after flashing with Smart Flash Tool then take it into repair shop. It's a hardware problem.
hi
nc
palalos81 said:
hi
Click to expand...
Click to collapse
i as i was trying to upgrade from v10h to v20 via KDZ the procedure stuck and couldn t been copleted.i wait for 15 min and nothing so i unplug the usb .from then the phone opens and saws the s/w upgrade icon and it stuck like that.i try reflash , downgrade other flashing methods,lgmobile pc recovery tool, from my pc and from others but nothing.the phone opens from the power botton saws the lg thread and then saws and stay in s/w upgrade icon .i try to boot in recovery but nothing the phone does the same. please help
palalos81 said:
i as i was trying to upgrade from v10h to v20 via KDZ the procedure stuck and couldn t been copleted.i wait for 15 min and nothing so i unplug the usb .from then the phone opens and saws the s/w upgrade icon and it stuck like that.i try reflash , downgrade other flashing methods,lgmobile pc recovery tool, from my pc and from others but nothing.the phone opens from the power botton saws the lg thread and then saws and stay in s/w upgrade icon .i try to boot in recovery but nothing the phone does the same. please help
Click to expand...
Click to collapse
please help
AW: jelly bean update error
palalos81 said:
please help
Click to expand...
Click to collapse
Maybe you destroyed your Bootloader?
When your try turn on the phone have you got any feedback?
Sent from my LG-P880 using xda app-developers app
palalos81 said:
please help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7