Related
My Lg O2x is on 2.2.2 v10d India I wanted to update it from 10d to 10e but when starts updatingbthrough pc it staks at 4% n after some time it says remove battery n switch off b switch on n tryagain i did twice or thrice it again staks at 4% n not update can anyone tell me why its not updating is it bcoz my phone is rooted or what reason or if any one knows where i can find 10e file for download then i flash it from cwm ! Please kindly help me i will always be thankful for you !!
Sent from my LG-P990 using XDA App
Same thing happened to me. The solution to fix it was to hard reset the device prior to update.(Make a backup if you choose this way). If Anyone in this forum can suggest a less “painful” way ….
Here is the solution suggested by Vidroid.
Vidroid said:
I had that problem, too. The problem is that the phone doesn't boot into software upgrade mode. I solved it by rebooting my pc, and did the complete upgrade routine again, then it worked. If that doesn't work, then you could try to manually boot into S/W upgrade mode, haven't tested it, though.
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
How can i manualy enter sw upgrade mode if the first way doesnt work plz tell
Sent from my LG-P990 using XDA App
Abhay Kaushal said:
How can i manualy enter sw upgrade mode if the first way doesnt work plz tell
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
press volume down and hold it while you connect your usb cable to pc.
dedroidz said:
press volume down and hold it while you connect your usb cable to pc.
Click to expand...
Click to collapse
Thanks. I had that happen to my earlier phone, which LG replaced. What's the changelog between 10D and and 10E?
Soulj4h said:
Thanks. I had that happen to my earlier phone, which LG replaced. What's the changelog between 10D and and 10E?
Click to expand...
Click to collapse
I have EU O2X updated via LG Soft to 10E (automatically) and the phone began still just rebooted. I returned to 10D
How did you return to 10D?
I have the same problem,too.Because iwant to overclock my v10d optimus 2x so I try to flash neoblaze kernal.But option failed.Then I try to flash lge version from v10d to v10e,but what too bad is that my phone
can't reboot to main screen.And can't enter s/w update！Then i serch the internet it says that i need to flash nvflash,OK,then i try to flash nvflash...At last my phone restore to the original state:-I
-------------------------------------
Sent from my LG-P990
The LG software never worked for me, it always (and i mean always) lose connection with the phone and once it stopped during the process my phone was bricked. Nvflash does the job properly
hello everybody. i have problem... today i restart my lg ob after changing theme in nova script(i had nova v8) and after this restart phone does not goes to the system. Its restarts normal, i saw lg logo but after that, instead of bootanimation i saw black screen with blinking touch keys(menu, home, back, search). I pulled of battery for few seconds and put it back...turn on phone and...the same... :/ next i goes to emergency recovery and flash nova8 again and guess what? still the same!!!! after lg logo black screen with blinking touch keys! i tried to flash stock s/w with kdz updater, i tried 10a and 10e version and still the same! do u have maybe some other ideas how can i try to flash this that would maybe help me? or maybe i have to sent phone to service?
sorry for my english
Try factory-reset via recovery.
miticogirl said:
Try factory-reset via recovery.
Click to expand...
Click to collapse
but now i dont have nova or cwm recovery ;/
try hard reset (search for it )
Download LGMobile Update http://forum.xda-developers.com/showthread.php?t=1111771 in this Update Kit. Then turn of phone, pull of battery and press and hold Vol+ button and plug in USB and then in LGMobile Update click on "Custommer Support" and Recovery Phone. Write your IMEI and click check. It can take a lot of time because it will download a new firmware.
fatcobrah said:
try hard reset (search for it )
Click to expand...
Click to collapse
how can i do hard reset if my phone does not boot to system? i tried software recovery in lg mobile update but it does not helped too ;/
miticogirl said:
Download LGMobile Update http://forum.xda-developers.com/showthread.php?t=1111771 in this Update Kit. Then turn of phone, pull of battery and press and hold Vol+ button and plug in USB and then in LGMobile Update click on "Custommer Support" and Recovery Phone. Write your IMEI and click check. It can take a lot of time because it will download a new firmware.
Click to expand...
Click to collapse
yep..i've done this twice but no luck ;/
Send phone to service, they will change your mainboard or they will give you new phone.
yeaa..thought the same... thanks for answers !
dzynio said:
yeaa..thought the same... thanks for answers !
Click to expand...
Click to collapse
try with KDZ Updater...
dzynio said:
yep..i've done this twice but no luck ;/
Click to expand...
Click to collapse
nah, keep on holding that volume up then plug in the USB. have you installed the USB drivers?
Turn your phone off. Use eRecovery! Turn phone on then repeatedly hit Vol Down key then do factory reset. If no luck use KDZ updater.
gabwerkz said:
nah, keep on holding that volume up then plug in the USB. have you installed the USB drivers?
Click to expand...
Click to collapse
yes, i plug usb cable to device with holding vol+ and 'sw upgrade, please wait...' screen appear. I tried again few minutes ago with kdz updater and via lg mobile update phone recovery and no luck. Phone is rebooting (black screen with blinking touch keys) when installing software on 90% ;/ of course installing software goes to 100% and says its completed and ok, but phone reboots on 90% ;/. I have installed all drivers, i tried on my laptop (win7) and my dad (win xp).
dzynio said:
yes, i plug usb cable to device with holding vol+ and 'sw upgrade, please wait...' screen appear. I tried again few minutes ago with kdz updater and via lg mobile update phone recovery and no luck. Phone is rebooting (black screen with blinking touch keys) when installing software on 90% ;/ of course installing software goes to 100% and says its completed and ok, but phone reboots on 90% ;/. I have installed all drivers, i tried on my laptop (win7) and my dad (win xp).
Click to expand...
Click to collapse
it's normal reboot on 90% and next go to 100%, i do that with windows XP and work...
fortunat0 said:
it's normal reboot on 90% and next go to 100%, i do that with windows XP and work...
Click to expand...
Click to collapse
so maybe its normal, but really...i've tried a couple of times with kdz and phone recovery by lg mobile and still the same, black screen, blinking touch keys. And i dont have eRecovery any more beacause i flashed stock s/w but it dont work ;/
that's a big hello of a problem.... I jonno what else u can do... if I were u then I would flash it again and again... then maybe for the customer care center... although I think ur warranty is being voided so u will not be able to repair it for free... let's hope for the best and let us know what happens next... best of luck...
Przykro ki kolego, nie naprawisz tego sam. Musisz odeslac telefon do serwisu LG w Mławie...
Sorry pal, you can't fix it yourself. You must send it to LG service centre in Mława (Poland)...
Sent from my LG-P970 using XDA Premium App
shourov said:
that's a big hello of a problem.... I jonno what else u can do... if I were u then I would flash it again and again... then maybe for the customer care center... although I think ur warranty is being voided so u will not be able to repair it for free... let's hope for the best and let us know what happens next... best of luck...
Click to expand...
Click to collapse
+1 for this. Flash and flash. Try upgrading to V10E via KDZ. Me thinks it's a bootloader problem. Does LG SECURITY TEAM appears or not?
Sent from my LG-P970 using xda premium
yeah..i flashed this several times...with kdz updater and by lg mobile update->phone recovery. I flashed 10A and 10E...results the same. I dont know how LG SECURITY TEAM looks like but i didnt see anything else besides LG LOGO--> Black screen with blinking touch keys and just Black screen with blinking keys (even without lg logo). I give up with this, there is no hope for this phone i think, today im sending this to the service. Thanks for helping me i will certainly write here what happend if i get phone back
I also stuck on the same thing
Really for that reason i hate LG Black
please help me i have flashed using convert kdz and flashed by SFT.. my phone now not working.. no power any thing... what i do now ???:crying:
remove the battery, enter in s/w update mode and reflash whith SFT but with a good rom.
=> http://forum.xda-developers.com/showthread.php?t=1448803
rom V20O => http://forum.xda-developers.com/showpost.php?p=23788913&postcount=170
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Edvin73 said:
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
Click to expand...
Click to collapse
maybe something wrong i did but sft tool completed flash my phone i think my kdz file was wrong maybe... i give it to mobile repair center today and he also said that phone is totally dead not detecting to pc, now he will check motherboard... tomorrow i will know...
i am talking about LG P970
anyway i have SE Arc S also.
N00BY0815 said:
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
N00BY0815 said:
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
Click to expand...
Click to collapse
yes m sure.
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Well, the phone goes in bootloop when you flash patched files with recovery and then forget to flash Superuser.You must not boot your phone when it enters in recovery after flashing with SFT but flash Superuser from your SD card first.I think that this maybe was your first problem.But LG logo and flashing leds are also a very possible sign for a faulty motherboard.The same happened to me with one week old P970 with official firmware and not rooted, when I tried just to reboot the thing.And if your phone died after this, you can be 99.9% sure that you have a fu.ked motherboard.
Hello Guys,
i have bricked my Phone yesterday by deinstalling Google Movies and Google Books (yes I am a idiot). So today i wanted to flash the phone via kdz. So it works correct until my PC got a bluescreen... Then i wanted to flash again. So i put my phone in S/W Mode, but it shows the S/W Update logo foe 2 secs and then the screen turns black. After 5 more secs the LG starts to vibrate a lot. I cannot use the S/W anymore to restore it. I hope you can help my with this BIG Problem.
trapn said:
Hello Guys,
i have bricked my Phone yesterday by deinstalling Google Movies and Google Books (yes I am a idiot). So today i wanted to flash the phone via kdz. So it works correct until my PC got a bluescreen... Then i wanted to flash again. So i put my phone in S/W Mode, but it shows the S/W Update logo foe 2 secs and then the screen turns black. After 5 more secs the LG starts to vibrate a lot. I cannot use the S/W anymore to restore it. I hope you can help my with this BIG Problem.
Click to expand...
Click to collapse
which version you have?try to go in sw mode with battery in.Can you enter in recovery(press the "volume down" and "power" key to boot, do not release the volume down key until the screen appears with a red triangle robot)?
igorstoja83 said:
which version you have?try to go in sw mode with battery in.Can you enter in recovery(press the "volume down" and "power" key to boot, do not release the volume down key until the screen appears with a red triangle robot)?
Click to expand...
Click to collapse
i have normal lg 10h_00 version, i cannot go into recovery mode but it goes on with the akku, so the s/w update is still there.
trapn said:
i have normal lg 10h_00 version, i cannot go into recovery mode but it goes on with the akku, so the s/w update is still there.
Click to expand...
Click to collapse
try all steps for flashing kdz again with battery in and should be sucsses
igorstoja83 said:
try all steps again with battery in and should be sucsses
Click to expand...
Click to collapse
yes i really hope it, but thanks for your help, if it doesnt work i write in a few min.
trapn said:
yes i really hope it, but thanks for your help, if it doesnt work i write in a few min.
Click to expand...
Click to collapse
okay stuck on iparam = 708 with battery in...
It was same for me first but battery on when u connect battery than but it out than when u see parameters screen but the battery back
Sent from my LG-P880 using xda premium
trapn said:
okay stuck on iparam = 708 with battery in...
Click to expand...
Click to collapse
i had this problem too and solve it,dont worry,you not bricked your phone try to flash with this (easiest way) http://forum.xda-developers.com/showthread.php?t=2134192 , if you dont sucsses try to carefuly read instruction in this thread http://forum.xda-developers.com/showthread.php?t=2069723 somethimes you may to try several times
dont forget to click thanx button
igorstoja83 said:
i had this problem too and solve it,dont worry,you not bricked your phone try to flash with this (easiest way) http://forum.xda-developers.com/showthread.php?t=2134192 , if you dont sucsses try to carefuly read instruction in this thread http://forum.xda-developers.com/showthread.php?t=2069723 somethimes you may to try several times
dont forget to click thanx button
Click to expand...
Click to collapse
pc suite dont recognize my phone
Did you install drivers for your phone?and when plug your phone in pc check in settings and connection tipe check lg pc suite and turn on usb debbuging in developer settings
Sent from my LG-P880 using xda app-developers app
igorstoja83 said:
Did you install drivers for your phone?and when plug your phone in pc check in settings and connection tipe check lg pc suite and turn on usb debbuging in developer settings
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
i dont have connection to to android interface i cannot go into usb dubbing only in s/w mode the rest ist still broken
trapn said:
i dont have connection to to android interface i cannot go into usb dubbing only in s/w mode the rest ist still broken
Click to expand...
Click to collapse
Sorry my mistake.Try with second step again http://forum.xda-developers.com/showthread.php?t=2069723 and carefuly read instruction and dont forget to install usb drivers if you not say me if you sucsses
igorstoja83 said:
Sorry my mistake.Try with second step again http://forum.xda-developers.com/showthread.php?t=2069723 and carefuly read instruction and dont forget to install usb drivers if you not say me if you sucsses
Click to expand...
Click to collapse
doing it now the 5th time, same fail. stopped at iparam = 708 and phone doesnt automatically reboot, i do not understand that :crying:
t hink i have some prob as this sir: http://forum.xda-developers.com/showthread.php?t=2043847
trapn said:
doing it now the 5th time, same fail. stopped at iparam = 708 and phone doesnt automatically reboot, i do not understand that :crying:
t hink i have some prob as this sir: http://forum.xda-developers.com/showthread.php?t=2043847
Click to expand...
Click to collapse
That "sir", have a developer phone...
Try to flash with LGFlash Tool, look at this thread:
http://forum.xda-developers.com/showthread.php?t=2179126
If you go lower, on the 7th post, you'll find some files to download if you need them.
You can choose from the two methods posted there, 1st post (OP) or 7th post...
Good luck
RuedasLocas said:
That "sir", have a developer phone...
Try to flash with LGFlash Tool, look at this thread:
http://forum.xda-developers.com/showthread.php?t=2179126
If you go lower, on the 7th post, you'll find some files to download if you need them.
You can choose from the two methods posted there, 1st post (OP) or 7th post...
Good luck
Click to expand...
Click to collapse
i am doing your method now, lets have a look
trapn said:
i am doing your method now, lets have a look
Click to expand...
Click to collapse
okay looks like this if i select 3rd port it breaks up at 22% the others are still on 3%
http://www.abload.de/image.php?img=unbenanntv2zd2.jpg
trapn said:
okay looks like this if i select 3rd port it breaks up at 22% the others are still on 3%
http://www.abload.de/image.php?img=unbenanntv2zd2.jpg
Click to expand...
Click to collapse
ok if i start in usb mode then choose port 1 it breaks up at 22%
Just let it stay in UART, in port selection choose the first one you saw active. Pay attention to the guide
Sent from my LG-P880 using xda app-developers app
RuedasLocas said:
Just let it stay in UART, in port selection choose the first one you saw active. Pay attention to the guide
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
can you help me in skype? :*
trapn said:
can you help me in skype? :*
Click to expand...
Click to collapse
I don't use Skype... And right now I'm not at home, sorry. Pay attention to the guide, do it slowly and be sure your battery is almost fully charged.
Sent from my LG-P880 using xda app-developers app
Hello. I tried to flash original firmware from cyanogenmod 10.2. I use this toturial: http://forum.xda-developers.com/showthread.php?t=2069723
Phone was bootloop. Now i canť power my LG... screen remains black, no signs on as if it was not battery. I apologize for the mistakes I´am czech (13)
Please help me..
SXP88 said:
Hello. I tried to flash original firmware from cyanogenmod 10.2. I use this toturial: http://forum.xda-developers.com/showthread.php?t=2069723
Phone was bootloop. Now i canť power my LG... screen remains black, no signs on as if it was not battery. I apologize for the mistakes I´am czech (13)
Please help me..
Click to expand...
Click to collapse
Did you unlock your bootloader? If not you can probably use your 4X as a brick.
And the tutorial you followed is not for a custom rom (zip files, flash through cwm) but for stock LG ROM (kdz files).
EDIT: Or did you try to go back to stock?
If so, you should try to connect in S/W Mode and manually flash a kdz. Search for it.
Sent from my LG-P880
Omario-242 said:
Did you unlock your bootloader? If not you can probably use your 4X as a brick.
And the tutorial you followed is not for a custom rom (zip files, flash through cwm) but for stock LG ROM (kdz files).
EDIT: Or did you try to go back to stock?
If so, you should try to connect in S/W Mode and manually flash a kdz. Search for it.
Sent from my LG-P880
Click to expand...
Click to collapse
Yes i´m have got unlock BL.
From this toturial i flash original rom V10H. The phone was bootloop, after a week of lying flat on the table, it was completely dead .. nothing can or s / w upgrade, I do not
SXP88 said:
Yes i´m have got unlock BL.
From this toturial i flash original rom V10H. The phone was bootloop, after a week of lying flat on the table, it was completely dead .. nothing can or s / w upgrade, I do not
Click to expand...
Click to collapse
I assume it's a driver problem. Try to reinstall all drivers on your PC and try again.
Sent from my LG-P880
Omario-242 said:
I assume it's a driver problem. Try to reinstall all drivers on your PC and try again.
Sent from my LG-P880
Click to expand...
Click to collapse
as when the phone is not connected to a PC or charging. One user on the Czech forum say it is about NAND memory corruptions> Service