hi everyone
i'm little stuck with unrooting my UK G1
so here is the deal
at first it had CRB43 firmware and it was unrooted
then i've made a GoldCard, then rolled back to RC7, then rooted the phone and so on
yesterday I've tried to unroot the device, so I used "howto" in the topic nearby
I couldn't install RC7 (Not Allow error), so used RC29, then updated via update.zip to RC30, then I went to sleep. Next day I woke up, I was sure that the phone will download the updates so today I'll have cupcake ... no way( btw I couldn't find updates in the settings menu
then again downloaded RC7 firmware and againg not allow
downgrading to RC29 also returns 'not allow' error, so I'm stuck now with RC30 and no updates
here's my spl:
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
please someone help me!
and sorry for my english it's not my native language)
put the file inside of the rc29 onto sd and load up into fastboot by pressing end and camers key. the file is called DREAIMG.nbh
i get rainbow screen, then it turns grey it starts check and returns number and 'not allow'
thenixan said:
hi everyone
i'm little stuck with unrooting my UK G1
so here is the deal
at first it had CRB43 firmware and it was unrooted
then i've made a GoldCard, then rolled back to RC7, then rooted the phone and so on
yesterday I've tried to unroot the device, so I used "howto" in the topic nearby
I couldn't install RC7 (Not Allow error), so used RC29, then updated via update.zip to RC30, then I went to sleep. Next day I woke up, I was sure that the phone will download the updates so today I'll have cupcake ... no way( btw I couldn't find updates in the settings menu
then again downloaded RC7 firmware and againg not allow
downgrading to RC29 also returns 'not allow' error, so I'm stuck now with RC30 and no updates
here's my spl:
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
please someone help me!
and sorry for my english it's not my native language)
Click to expand...
Click to collapse
lol its cause you have the stock SPL
upgrade to the HardSPL to downgrade. It should work
i really dont understand why do i need to get teh hardspl caus ive got the original one now and the european device but the eu firmware wont install
upd hahaha lolol ive got the automatic upate downloaded
im on cupcake right now)
sorry for nmy grammar im drunk a litl bit XD
thenixan said:
i really dont understand why do i need to get teh hardspl caus ive got the original one now and the european device but the eu firmware wont install
upd hahaha lolol ive got the automatic upate downloaded
im on cupcake right now)
sorry for nmy grammar im drunk a litl bit XD
Click to expand...
Click to collapse
Its because the hardspl will allow you to flash images from other regions
do they have a DREAIMG.nbh from RC7? Im not sure if there was or not lol but were you able to flash it
I just got my replacement G1 (I bricked my last one, stupid move on my part) and it is a referb.
Hboot says:
PVT 32B
1.33.0010 DREAM21000
CPLD-4
Radio 3.22.26.17
So I thought this should be easy to root, but Zinx's Recovery Flasher won't work.
Backup gives - Backup FAILED: Could not run command. I don't really care I don't need a backup.
Clicking Flash gives - Flash FAILED: Could not run command.
Any suggestions?
I thought that since it was still 1.33.0010 all would be good, but no dice.
Also I tried to do the goldcard method but I am not really sure how this works. I created the goldcard... but I don't know how to get the .nbh file onto the card after it has been made into a gold card...
Suggestions please.
If your build number in settings, about phone is 1.89.631.1 you are running Rogers latest firmware update which currently is not rootable.
k so I'm a noob and I'm sure I'm missing something obvious. I was however able to root my rogers dream and I’m now running Cyanogenmod-6.0.0-DS.
I recently purchased the premium version of “ROM manager”. The idea of being able to flash ROMS at will seems cool (although I don’t think there’s that many for my phone.)
The thing is, the ROM manager doesn’t work. The only thing it does is detect a newer version of the OS and download it. I can’t back up my current image or flash a new ROM. If I try, it just hangs at the Rogers screen FOREVER, and I have to take the battery out. Then it will reboot normally. I’ve followed any instructions I have found but nothing I try works.
Please help me! What am I doing wrong?!
You should post the specs of your phone (radio, spl and recovery version) when asking for help.
Got the same problem here. Have you found a solution?
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA21000)
CPLD-4
RADIO-3.22.26.17
Apr 20 2009, 15:30:43
Thanks
dvscool said:
The thing is, the ROM manager doesn’t work. The only thing it does is detect a newer version of the OS and download it. I can’t back up my current image or flash a new ROM. If I try, it just hangs at the Rogers screen FOREVER, and I have to take the battery out. Then it will reboot normally. I’ve followed any instructions I have found but nothing I try works.
Please help me! What am I doing wrong?!
Click to expand...
Click to collapse
THere is no "Rogers Dream" version of Clockwork recovery..
best is either one of two things:
1) select the "Magic" version when asked while flashing.. this will install the 32a magic recovery that will at least boot on the ebi1 rogers dream
2) install the 2708+ radio/kernel via fastboot and then the dream version.. recall however while that will work for clockwork the cyanogen mod version in RomManager is not 2708+ compatible.. make sure you get one of the other kernels. (also remember if you are with rogers they may cut your data if you have not signed the e911 wavier and use a radio other than the one you have.. yet 3g will be much more relyable on the 2708+ radio if you have signed the wavier.. and more ram)
I have a Rogers Dream/G1 with T-Mobile rc29 rom (doh!), which works and is usable but I want to get back to CM5. Please show me the way or put me out of my misery if its hopeless.
Recovery hangs at Tmobile G1 screen.
Fastboot gives me "00028002 Not Allow" code then is stuck with serial0.
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Tried Adb to get amon-ra 1.7.0, but still won't boot into recovery and is stuck at G1 screen. No memory error, just an immediate echo of the "flash_image recovery data/local/recovery.img" command after I hit enter.
fastboot won't show my device in cmd when at the 4colored screen but adb does recognize.
I'm pretty sure I mixed up the radio and spl, but does having access to the OS give me any options?
Please, point me in the right direction.
****SOLVED**** see Post#20 for my conclusion.
Download clockwork recovery, flash clockwork, then you'll have recovery?
Not sure tho, I think this was how I did it.
I think what you're talking about is ROM Manager, it includes Clockwork Recovery if I understand the dev's description correctly. I haven't tried it myself though.
Seems to me, that he is on a stock ROM and doesn't have root access.
If the phone is booting, a chance could be, to install 1-click-root (don't know how it is called exactly, but you can google for it) and then from there to install a custom recovery. After that, you can install CM5 or something else. Probably first I would install is an engineering SPL (1.33.2003 for example) which supports fastboot. With your current SPL you will not have a chance to get fastboot running.
But be careful: 1.33.2003 supports only radio version 1.x and 2.x. I am not sure if 1.33.2003 is the best solution for you, because you have a rogers dream.
i recomend the old way.. get the fflashrecapk. and use io file manager to flash it.. only problem is you need to be 1.5 if your on 1.6 than you need to downgrade.. but that would be difficult since you have no recovery lol
While a bit more work.. before all the how to's confuse you into bricking your phone, I'd make yourself a gold card, and use it to flash the orange nbh from the 2708+ thread.. (rename to DREAIMG.nbh and place on the goldcard, then boot with camera+power it will ask you to flash it)
Once you have the orange rom you will have fastboot and a 2.x radio.. if you don't need the 3.22 radio .. just flash the 2708+ radio+spl+hboot as per normal followed by a rom.. if you do need the 3.22 radio (rogers customer who has not signed the wavier and wishes to keep data) either flash the rogers e911 update and re-root or 1.33.2005+3.22.26.17 and a rom
Sorry lack of links.
is it rooted?
maybe you can flash the recovery through terminal
Thanks for the replies, lots to research.
I'v tried a bunch of rooting methods.
exploid pushed from ADB said it worked (but didnt)
SuperOneClick said it worked after some rapid OFF-ON-OFF-ON debugging(but didnt install superuser even after reboot)
Universal androot forcecloses on launch
flashrec has the "download cyan...." button blocked out, tried renaming amon-ra to the recovery-backup.img and it said successful, but still is stuck at g1 screen.
I found another post with someone in the same situation at:
http://forum.xda-developers.com/archive/index.php/t-580669.html
They did the same thing by flashing the tmobile firmware 1.0 and we have the same numbers:
Model Number: T-Mobile G1
Firmware version: 1.0
Baseband Version: 62.33.20.08H_1.22.12.29
Kernel Version: 2.6.25-01843-gfea26b0 [email protected]#6
Build Number: kila-user 1.0 TC4-R29 115247 ota-rel-keys,release-keys
When I start up (CAMERA + POWER) I get the following settings (on red/green/blue/white screen *sigh*)
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial 0
Funny thing is I was so excited when SuperOneClick said it was successful and asked if I wanted to donate that I didnt even check if I had superuser before going through paypal. I'v wasted so many hours on this dinosaur G1 but damn I want it back to CM5. Please continue with the help.
kl3vr said:
Thanks for the replies, lots to research.
I'v tried a bunch of rooting methods.
exploid pushed from ADB said it worked (but didnt)
SuperOneClick said it worked after some rapid OFF-ON-OFF-ON debugging(but didnt install superuser even after reboot)
Universal androot forcecloses on launch
flashrec has the "download cyan...." button blocked out, tried renaming amon-ra to the recovery-backup.img and it said successful, but still is stuck at g1 screen.
I found another post with someone in the same situation at:
http://forum.xda-developers.com/archive/index.php/t-580669.html
They did the same thing by flashing the tmobile firmware 1.0 and we have the same numbers:
Model Number: T-Mobile G1
Firmware version: 1.0
Baseband Version: 62.33.20.08H_1.22.12.29
Kernel Version: 2.6.25-01843-gfea26b0 [email protected]#6
Build Number: kila-user 1.0 TC4-R29 115247 ota-rel-keys,release-keys
When I start up (CAMERA + POWER) I get the following settings (on red/green/blue/white screen *sigh*)
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial 0
Funny thing is I was so excited when SuperOneClick said it was successful and asked if I wanted to donate that I didnt even check if I had superuser before going through paypal. I'v wasted so many hours on this dinosaur G1 but damn I want it back to CM5. Please continue with the help.
Click to expand...
Click to collapse
ok ummm wow you did a lot lol are you sure you did the flaskrec.apk thing right? so as of right now your phone is not rooted? and you are on 1.0? if thats the case you should get automatic updates and hopefully that could help you.. if not try downloading rom manager than flash the clockwork recovery.. personally i hate clockwork but if you can get that to work than i could help you get back to RA if you would like..
Well its a one-click solution, I must have missed the options... I installed it and ran the back up, but the "download" button was grayed out. was I supposed to do something with the entry field?
Rom Manager gives me "Application install unsuccessful" using AndExplorer and I think Clockwork gave me this problem in the first place back when I was using CM6.
kl3vr said:
Well its a one-click solution, I must have missed the options... I installed it and ran the back up, but the "download" button was grayed out. was I supposed to do something with the entry field?
Rom Manager gives me "Application install unsuccessful" using AndExplorer and I think Clockwork gave me this problem in the first place back when I was using CM6.
Click to expand...
Click to collapse
I think Ezterry's post (#6) is your best option
you don't mention you have tried that
you will need to do some research into goldcards and finding the orange.nbh link
hint for the orange see threads started by ezterry (via his profile) look at the kernel for 2708 thread
Ok thanks, I'v got my gold card made but is safe to flash 1.33.200* SPL with 1.22.12.29 Radio? Isnt it a DangerSPL? Sorry if thats way off base.
kl3vr said:
Ok thanks, I'v got my gold card made but is safe to flash 1.33.200* SPL with 1.22.12.29 Radio? Isnt it a DangerSPL? Sorry if thats way off base.
Click to expand...
Click to collapse
for the record
1.33.2003 is compatible with 1.x and 2.x radios but will brick with 3.x
1.33.2005 is compatible with 2.x and 3.x radios but will brick with 1.x
so 1.33.200* is only compatible with 2.x
read Ezterry's 2708 post, the answers you seek are in it
sorry for delay lol but with the flashrec file wat you do is press backup than when your typing in the box you have to put exactly what your file says...
ex.. sdcard/recovery-RA-dream-v1.0.7-cyan.img (yours could be diff but make sure you type exactly what your file says that you placed on sd card) hope it helps
You guys are awesome, thank you everyone who was interested and especially ezterry, Effdee and Idrifta for the enduring help. I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio. Is it as simple as updating hboot to 1.33.2010 then flashing 3.22? Is it worth doing?
Again, sorry if that is way off base but this is the first week my phone has been usable in months, and I won't jeopardize it again.
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Recov: Cyan1.7
Rom: CM 5.0.8 - 2708 port
Thank you,
-kl3vr
kl3vr said:
You guys are awesome, thank you everyone who was interested and especially ezterry, Effdee and Idrifta for the enduring help. I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio. Is it as simple as updating hboot to 1.33.2010 then flashing 3.22? Is it worth doing?
Again, sorry if that is way off base but this is the first week my phone has been usable in months, and I won't jeopardize it again.
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Recov: Cyan1.7
Rom: CM 5.0.8 - 2708 port
Thank you,
-kl3vr
Click to expand...
Click to collapse
hey no prob glad to help!! how did you end up fixing it? haha just curious
kl3vr said:
I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio.
Click to expand...
Click to collapse
Why ebi1 is equivalent to the old ebi0 and you loose the extra ram.
Thus unless there is a very specific reason it's a downgrade
kl3vr said:
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Click to expand...
Click to collapse
Best stay as is or upgrade the radio to 2.22.28.25.. As it has been distributed world wide. (Including to all locations 2.22.27.08 was previously distributed)
what did you do?
I would like to know if you solved this issue as mine is similar. I DO have root though, but i have no recov/fastboot. I am using a dev phone though.
ps, grats on getting it working
cacaface said:
I would like to know if you solved this issue as mine is similar. I DO have root though, but i have no recov/fastboot. I am using a dev phone though.
ps, grats on getting it working
Click to expand...
Click to collapse
If you flashed 0.95.0000 you are no longer using a dev phone (what do you see when you boot holding camera?)
The good news is that the ADP1 used the universal CID (11111111) and is thus not restricted to a particular carriers nbh file.. so you can probably just flash the orange nbh without the goldcard [just renamed DREAIMG.nbh on the root of your SDCard], then follow the 2708+ radio instructions.. or install 1.33.2003/5 via fastboot if you need the old radio.
The reason I'm pointing to the orange nbh is it will let you bypass the whole "I bricked my phone because I insisted on flashing death SPL via recovery" since you have an engineering SPL and 2.x radio after flashing that orange NBH from the 2708+ thread.
This is what worked for me, going from:
- a non responsive recovery
- OS locked at activation, so no usb debugging
- OS refused to root
- quadicolored fastboot screen that wouldnt recognize usb
To CM5 2708+ with RA-cyan1.7.
Before this thread I had to use this to get post the verizon data plan only activation to enable usb debugging.
Made a goldcard
Put the orange nbh renamed to DREAIMG.nbh (can't remember where i got it from, just searched) on the goldcard, Booted with camera+power to get fastboot, and applied the update.
Followed ezterry's post and at step 5 flipped over to this post on CM5 2708+
Now I'm gonna update the radio using exterry's advanced zips. Thanks again everyone, another successful thread.
Hey Guys,
i have quite a serious issue with my HTC Incredible S i bought in Thailand.
As it was S-On, I first went for a XTC-Clip. The mobile had hboot 1.13.***
As XTC Clip offered only hboot 1.09, i simply chose that one and my phone was S-OFF a few minutes later. Everything ok.
As a second step, i installed CWM 4.0.0.4 to make a snapshot of my current system.
Since the mobile is still running stock 2.2, i tried to do an OTA upgrade from HTC.
Much to my suprise this upgrade failed (wrong model id). I then downloaded a custom ROM from XDA (Virtuous Unity 1.27.0 Sense 3.0) and tried to flash it via CWM. The installer stopped then with a cryptic error message (pls. see enclosed picture).
I suspect XTC Clip changed/replaced parts of my hboot and thus the phone has a wrong ID which prevents me from installing any new ROM or upgrades.
So i did some research and thought, that Alpharev-X could solve the problem
I ran the tool (beta2) and everything went smooth. But the problem with the model ID still persists
I checked my hboot, which gives me the following details:
AlphaRev
VIVO PVT SHIP S-OFF RL
HBOOT-6.13.1002
RADIO-38.02.01.11_M
eMMC-boot
Does anyone of you has an idea how to "unlock" my phone so that i can flash the ROMs of this great community?
Thank you very much in advance for any help!
Best regards,
H.
hegemonie said:
Hey Guys,
i have quite a serious issue with my HTC Incredible S i bought in Thailand.
As it was S-On, I first went for a XTC-Clip. The mobile had hboot 1.13.***
As XTC Clip offered only hboot 1.09, i simply chose that one and my phone was S-OFF a few minutes later. Everything ok.
As a second step, i installed CWM 4.0.0.4 to make a snapshot of my current system.
Since the mobile is still running stock 2.2, i tried to do an OTA upgrade from HTC.
Much to my suprise this upgrade failed (wrong model id). I then downloaded a custom ROM from XDA (Virtuous Unity 1.27.0 Sense 3.0) and tried to flash it via CWM. The installer stopped then with a cryptic error message (pls. see enclosed picture).
I suspect XTC Clip changed/replaced parts of my hboot and thus the phone has a wrong ID which prevents me from installing any new ROM or upgrades.
So i did some research and thought, that Alpharev-X could solve the problem
I ran the tool (beta2) and everything went smooth. But the problem with the model ID still persists
I checked my hboot, which gives me the following details:
AlphaRev
VIVO PVT SHIP S-OFF RL
HBOOT-6.13.1002
RADIO-38.02.01.11_M
eMMC-boot
Does anyone of you has an idea how to "unlock" my phone so that i can flash the ROMs of this great community?
Thank you very much in advance for any help!
Best regards,
H.
Click to expand...
Click to collapse
Rest assured, your phone is unlocked and has security turned off so that you can flash custom ROMs. I can only assume that you must have a IncS model 710d. At some point during the IncS international releases, the internal model switched from "incs" to "vivo". The ROM you are trying to install is looking for "incs", not "vivo". I would suggest you try another one of the custom ROMs and see if they will install.
tpbklake said:
Rest assured, your phone is unlocked and has security turned off so that you can flash custom ROMs. I can only assume that you must have a IncS model 710d. At some point during the IncS international releases, the internal model switched from "incs" to "vivo". The ROM you are trying to install is looking for "incs", not "vivo". I would suggest you try another one of the custom ROMs and see if they will install.
Click to expand...
Click to collapse
ok, i will give it a try. but does this also explain why i cannot install the official 2.3.3 over the air upgrade of HTC? my phone tells me that the upgrade is available but fails to install the downloaded package
hegemonie said:
ok, i will give it a try. but does this also explain why i cannot install the official 2.3.3 over the air upgrade of HTC? my phone tells me that the upgrade is available but fails to install the downloaded package
Click to expand...
Click to collapse
No, the OTA update is failing because you have ClockworkMod recovery installed. OTA updates require that the original HTC recovery be in place.
hello,
i could finally install the MIU ROM for the IncS and from there successfully upgrade to the Virtuous ROM v1.29.
Again many thanks for your help!
H.