Database Develop

[Q] Problem of teamhacksung's ICS Build 8

I've tried to install teamhacksung's ICS Bulid 6,7&8 but all dosen't work.
"assert failed: getprop...... E"Error in /sdcard...... (Status 7) Installation aborted."
I've tried to install CM7 before it but also encountered status 7.
I've tried to modify updater-script but encountered status 7 again.
Some informations:
Model: Samsung Galaxy S GT-I9000
Region: Hong Kong
Using ROM: Onecosmic's ICS Beta
Flashing way: By flashing zip in CWM. Followed instructions "Coming from onecosmic's ICS build?"
Thank you for all your support!

Very strange...try coming from GB again (Odin re-flash).

Ashtrix said:
Very strange...try coming from GB again (Odin re-flash).
Click to expand...
Click to collapse
What's meaning by GB? What about the Nandroid backup? Will I lost them after I Flash a stock ROM?

Hi I saw your message. I can help you, so I did something usefull today. XD
1 First of al you flash cyanogenmod 7.1 (GB=Gingerbread) don't forget to wipe dalvic cache and wipe cache partition and do factory reset.
than you go to follow site:from step 2 and furter
You have to scroll down till you see the discription
http://www.theandroidsoul.com/cm9-cyanogenmod-9-for-galaxy-s/
succes

I think I had the same problem. Earlier versions of onecosmics change the device name. After this I couldn't downgrade back to CM7, had to reflash the whole phone in ODIN.

I would suggest installing a Samsung Gingerbread rom first using odin, you can flash JVS rom. Root it using CF-Root kernel. Then install CM7 using CMW, then follow the instructions on how to install ICS from CM7.

ansonscleung said:
What's meaning by GB? What about the Nandroid backup? Will I lost them after I Flash a stock ROM?
Click to expand...
Click to collapse
it doesnt matter if you flash jvt or jvs, basically its the bootloaders that matter and u need GB b/l (gingerbread). Here you go...
1. flash XXJVT using this link here http://androidflip.com/how-to-insta...ad-xxjvt-update-on-samsung-galaxy-s-gt-i9000/
2. root your firmware using this link http://androidflip.com/how-to-root-samsung-galaxy-s-android-2-3-5-xxjvt/
3. go to recovery mode after rooting is done, then a) wipe data/factory reset, b)wipe cache partition, c) go to advanced>wipe dalvik cache, and flash your rom.
-----------------
not a noob, just a newb to xda. a thanks would be appreciated

Thank you for all your help!
But one more Q
My friend told me that flashing CM7.1 should be working with CWM 5 (sth like that).
Is it real?

ansonscleung said:
Thank you for all your help!
But one more Q
My friend told me that flashing CM7.1 should be working with CWM 5 (sth like that).
Is it real?
Click to expand...
Click to collapse
you mean flashing cm7.1 through cwm5? i dont think there should be any issues with that, depends actually on what rom u were. if you were using cwm5 whilst on ICS rom, then i suggest flash a GB based ROM first, root it and then ul have cwm 3.0.0.5. then go ahead and flash cm7.1 (which i personally dont like)
cheers!

[Q] Unfortunately, Application Installer has stopped: on any wipe-install

Hi,
I am having trouble flashing ROMs, my move from GB to ICS was not very straight forward but it worked, used Heimdall in the end (Mac for ODIN). However, now I am unable to wipe and flash any ROM, I can flash without wipe any ROM but no ROM works if I wipe and flash. I have tried a lot of them.
1. I have checked with parted (check), dd, and e2fsck. no bad blocks or read errors
2. I have flashed with Abyss RedPill and CF-Root CWM, ROMs boot but say: "Unfortunately, Application Installer has stopped" with "OK" button. No matter how many times I reboot it or press "OK" on it no ROM works.
3. Even the ROM I am running, it shows me 500 MB free on Settings > Applications but I sometimes get out of space while installing apps and "Move to SD" fails most of the time. That is the primary reason for which I want to wipe and clean install.
Please help. Any pointers will be highly appreciated. I really want to use this phone in a working condition till October. I know I will need the Note 2 and want to skip the S3.
Thank You.

Format both internal and external...
Download KL3 GB Stock Rom...
Do all 3 wipes and connect in download mide
Flash kl3 via pc odin...
Follow the videos in my sig to flash any ics rom
Its simple...
Install redpill 4.2..there are many out there search for the one that says redpilloriginaltouchlogo
Do all 3 wipes and flash any ics rom in redpill recovery
If none work...go to alliance ics rom
Follow each and every step given by robbie...
Or go to stock rooted gb...go to TMT Hybrid MIUI rom...flash according to method 5...
It should work
Good Luck

Thank you for your response, but I will appreciate if you can elaborate which recovery to use for which step and specially where to do the first step "Format both internal and external"? And once I have done that, how on earth can I do all 3 wipes because I will have no recovery and I can not have a flashable ROM file left either.
Thanks again.
Rulinglionadi said:
Format both internal and external...
Download KL3 GB Stock Rom...
Do all 3 wipes and connect in download mide
Flash kl3 via pc odin...
Follow the videos in my sig to flash any ics rom
Its simple...
Install redpill 4.2..there are many out there search for the one that says redpilloriginaltouchlogo
Do all 3 wipes and flash any ics rom in redpill recovery
If none work...go to alliance ics rom
Follow each and every step given by robbie...
Or go to stock rooted gb...go to TMT Hybrid MIUI rom...flash according to method 5...
It should work
Good Luck
Click to expand...
Click to collapse

I assume you have a working GB rom right now? ??
If yes...format and paste the recovery file...even if you dont have a working rom....flash kl3 via pc odin...
Go to recovery...it goes to android recovery and do the wipe...firmat the storage and paste redpill recovery which is given in the TMT MiUI thread...
Rest is as i explained last time...
---------- Post added at 07:57 AM ---------- Previous post was at 07:56 AM ----------
FYI if you dont have cwm...it goes to android based recovery..where you can do the wipes..

I have a working ICS ROM with CWM, but when I wipe and flash a new ROM, it does not work. The boot but say "Unfortunately, Application Installer has stopped". I can not get to the launcher or any application.
Rulinglionadi said:
I assume you have a working GB rom right now? ??
Click to expand...
Click to collapse

tazzix said:
I have a working ICS ROM with CWM, but when I wipe and flash a new ROM, it does not work. The boot but say "Unfortunately, Application Installer has stopped". I can not get to the launcher or any application.
Click to expand...
Click to collapse
That is why i said...format both
Install kl3 via pc odin..
Root and install cwm
Flash any rom you want
Or else flash robbies alliance gb and alliance ics over it
Or flash TMT MIUI over your stock rooted GB...method 5 is my recommendation

Thank you, downloading KL3 Singapore stock right now.
Please tell me where is option to "format both" or "format internal and external", I will try to get access to a Windows machine if its in ODIN.
Rulinglionadi said:
That is why i said...format both
Install kl3 via pc odin..
Root and install cwm
Flash any rom you want
Or else flash robbies alliance gb and alliance ics over it
Or flash TMT MIUI over your stock rooted GB...method 5 is my recommendation
Click to expand...
Click to collapse

tazzix said:
Thank you, downloading KL3 Singapore stock right now.
Please tell me where is option to "format both" or "format internal and external", I will try to get access to a Windows machine if its in ODIN.
Click to expand...
Click to collapse
You can do it in your phone itself...
Settings > storage
Or connect it to pc and format just like you format a pendrive
Its available in the CWM too...

Just wanted to thank everyone in this thread for helping me solve this issue.
I was on a custom GB ROM, tried to flash to Stock ICS (LKR) using Heimdall but kept encountering Application Installer crash. Based on advice in this thread I took the following steps:-
1. Flashed to Stock KKA GB ROM and rooted it using CF-Root
2. Flashed to Stock LKR ICS ROM through CWM.
No Application Installer Crash this time.

galaxy s2
I have the same problem on my galaxy s2, running unrooted stock 4.0.4 rom. And my home button isnt working :crying:

ndosh1man said:
I have the same problem on my galaxy s2, running unrooted stock 4.0.4 rom. And my home button isnt working :crying:
Click to expand...
Click to collapse
I had the problem when using heimdall to flash but the problem was sorted after flashing with odin. Seems that odin changes some other settings during the flash.
Sent from my GT-N7000 using xda premium

unfortunetely installer has stopped ok
everytime i open my galaxy note gt n7000 come out on the screen unfortunetely installer has stopped ok

Help newbie with installing new ROM

Hi, I'm stuck with installing new rom, so I hope, that you'll help me.
There are steps what I've done:
- followed THIS topic and ROOT the device with ODIN and CF-Root 4.4 file.
- OKAY, I'm rooted, so let's flash the new ROM
- entered in Clockworkmod Recovery and format EVERYTHING ( /data, /system, /cache, /sdcard etc.... just everything) for clear system
- next I load package with ROM and than INSTALLL
and here is the most important part
- when installed ROM gets something like bootloop but with restart - ROM is loading and after about 40 sec its RESTART
- and the same thing over and over again - restart ->loading->restart.... System never start up correctly to the end
- then when I saw that it does not work, I tried go into the CWM, but there was no CWM (!!!) - it was erased (by installing new ROM maybe???)
- so I must flash (old and stock) ROM via ODIN and again root device with CF-Root (with CWM) - that was only functional rom, what I was able to run, and again did this procedure
I tried this way, perhaps with millions of different ROM and EVERY was stucked (restart) while loading.
I think there are some non-deleted files in device, which should be erased (and which cannot be erased by CWM) for clear start of new installed ROM, what do you think?
Would someone please help me? I don't want old Gingerbread with Kies
Thanks for every responce!

Does it say in the thread that you have to flash a custom kernel?? Give.me the link for the thread so I can make sure that you've done everything right
Sent from ma 5assak

there is a link, but in hypertext THIS, i repost it in full text:
http://forum.xda-developers.com/showthread.php?t=788108
I think, when I've root and CWM, there is no problem and install a new rom will be very least, so not as it seems

Dude this is a kernel not a rom what's the matter with you??:what:
Sent from ma 5assak

please read all my topic - i flash this kernel only for clockworkmod recovery
through CWM I can flash any other rom
through ODIN only stock - cant find any ICS or JB rom which I can flash via ODIN (.tar file)

What variant of i9000 do you have? Are you sure that the rom you are trying to flash is made exactly for your variant?
EDIT: Try Darky ROM, they have an ODIN flashable version called "Resurrection Edition" or something.

I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak

Samsung Galaxy S I9000, i'm sure 100%. NOT I9001, NOT Samsung Galaxy S2. Tried many roms from Development section for I9000, tried from get.cm etc... always the same result bootloop with restart
donhashem.dh said:
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Click to expand...
Click to collapse
OK. For example: this rom cm-9.0.0-galaxysmtd and cm-9-20120815-NIGHTLY-galaxysmtd from http://get.cm/?device=galaxysmtd
Or this one last ([ALPHA][ROM][4.1.1] CyanogenMod 10 for Samsung Galaxy S) http://forum.xda-developers.com/showthread.php?t=1778526 and 20120808 build.
and [ROM][PORT][ANDROID 4.1.1][BETA] TAJB: Jelly Bean port for Galaxy S V7.1 http://forum.xda-developers.com/showthread.php?t=1747042
and this too [4.0.4][ROM] Dark Knight 5.5 [27/4/2012] http://forum.xda-developers.com/showthread.php?t=1510940
and many more....
realy unhappy from this

Nikishek said:
Samsung Galaxy S I9000, i'm sure 100%t
Click to expand...
Click to collapse
I meant I9000 or I9000B or I9000M or I9000T there's a difference between them

I9000 only, checked it several times

Ok so you can flash Darky Rom Resurrection Edition through ODIN with no problem. Its GingerBread if i remember correctly, but it should give you a recovery mode and fully operating phone. From this point you can flash whatever you want.

....And there is one more important thing:
When I have a stock kernel and stock rom from Samsung, cant get into recovery mode - VOLUME UP and POWER non functional. Only when I type: "adb reboot recovery" in terminal.
Just after when I flash a new pre-rooted kernel with CWM, VOLUPE UP and POWER is now functional
k4Z3666: OK, I try and give you an echo I think, when I format everything in CWM, there will be no sign of the earlier system and ALL WILL BE CLEAR

Nikishek said:
I9000 only, checked it several times
Click to expand...
Click to collapse
ok, flashing ICS, may need to be done twice, as first flash may bootloop, IF you want to return to stock to get out of this mess, since you are not sure as to where you are now, due to flashing many roms, use any kit from My Android Collections, link below to get you to a booting ROM, than add a kernel with CWM (use EZbaze package with kernels)

that's helped me too thank you
Sent from my GT-I9000 using xda app-developers app

[Q] Can't install other roms just ics

Hy!
After I changed gb layout to ics layout, I installed a rom ([ROM] ICS-android 4.0.4-FLEX-ICER), which works me perfectly, but if i'd like to change for another rom (new ics bootloader roms) CWM can't flash it. I changed the layout with all-in-one toolkit. CWM is v6.0.1.5. What can I do? Thank you for your answers

Strange issue ^^'
Did you format system ?
Or maybe try reflahing CWM (don't remember which version is for New ICS unlocked bootloader)
Or a good NVflash as usual

Mynix said:
Strange issue ^^'
Did you format system ?
Or maybe try reflahing CWM (don't remember which version is for New ICS unlocked bootloader)
Or a good NVflash as usual
Click to expand...
Click to collapse
I see all my internal storage, i made fortmat in cwm try install other roms, but nothimg change can i change cwm with all in one toolkit? Or change back to gb partition layout? I`m a little bit noob so...

Yes haven't tried but for sure you can flash cwm from AIO toolkit and also go back to GB layout too
I think you should try to NVflash a rom (ICS or GB bootloader) then root (AIO) flash a cwm recovery (Still from the perfect AOI toolkit) and reflash the rom you want from cwm, that's the cleanest way

Mynix said:
Yes haven't tried but for sure you can flash cwm from AIO toolkit and also go back to GB layout too
I think you should try to NVflash a rom (ICS or GB bootloader) then root (AIO) flash a cwm recovery (Still from the perfect AOI toolkit) and reflash the rom you want from cwm, that's the cleanest way
Click to expand...
Click to collapse
Could you suggest me a rom? Or i need to flash original rom? (thank you for your help )

Sometimes the problem lies with your downloaded rom. Maybe its corrupted and not downloaded properly. Try redownloading it or download a new compatible ROM. DjangoManouche X 1.2.1 by carburano works for me.You can give that a try. Or ParanoidAndroid v2.5 by tonyp.

Everyone forgets to flash this special recovery when wanting to flash CM10 based roms:
http://forum.xda-developers.com/showthread.php?t=2058231
read the post, flash the special recovery, then bam you'll be able to flash your new rom.

[Q] Cant install any custom rom - Green CWM V2.5.1.0 Speedmod ULFK

Hi ,
I have followed the the procedure 【Guide】How To flash ANY Captivate ROM from Stock (including ICS) to upgrade my Froyo 2.1 to any latest rom but it failed to do so due to error
Installing:SDCARD:Rom_name
Finding update package...
Opening Update package.......
Installing update.....
E:Error in /mnt/sdcard/Rom_name
(status 0)
Installation aborted
Click to expand...
Click to collapse
. I have now CWM recovery V2.5.1.0 Speedmod ULFX installed ( Green text one) . I have learned in so many posts that this version of CWM is too old to install recent ROMs . I've tried below rom but couldn't make that work :
CyanFox Rom
omni-MACKAY_ROM-4.4.2-20131217-galaxysmtd
I tired :
Wipe out cash
User data
Please help me on this

byazid said:
Please help me on this
Click to expand...
Click to collapse
Read carefully and follow this Guide. For 4.3.x and 4.4.x based ROMs see installation instructions in corresponding threads.

Val D. said:
Read carefully and follow this Guide. For 4.3.x and 4.4.x based ROMs see installation instructions in corresponding threads.
Click to expand...
Click to collapse
Hi,
Thanks for your reply. I've finally made my way to install [ROM][JB] [4.3] Avatar ROM for Samsung Captivate but it has just too many bugs.My keyboard is not working and keeps on crashing. Now i have CWM 6 installed and which helped this ROM installed. Regarding other ROM i have mentioned here is still giving me the same error.
Any idea?

byazid said:
Any idea?
Click to expand...
Click to collapse
Describe exactly what you did starting from stock 2.1 ROM.

Val D. said:
Describe exactly what you did starting from stock 2.1 ROM.
Click to expand...
Click to collapse
Hi,
I was finally able to flash the AVATAR rom . I messed around with installing latest google apps and which made the keyboard crashed , Now its working like charm ,
However, here is what i did.
1. I followed the guide 【Guide】How To flash ANY Captivate ROM from Stock (including ICS) to upgrade my Eclair 2.1 . Did exactly what was in the tutorial and succeed . ** Just a note- I missed to copy ROM in the SD card , which i managed to do later by mounting USB storage from CWM .
2. I went for flashing and it was always giving me the error when i tried to flash my phone with the rom CyanFox Rom
3. Then i downloaded the rom AVATAR and went for flashing , suddenly the phone rebooted ( Still it did not install the ROM) and a new version of CWM 6 appeared with Blue text . From there i flashed the new ROM and it was a success.
Currently i am running my phone without any problem .
However, I still can not flash below ROM
CyanFox Rom
omni-MACKAY_ROM-4.4.2-20131217-galaxysmtd
do you have any idea on how to make it work ?

- stop asking same questions in 2 different threads, please
- read carefully the Guide in post #2 ant try to understand the process
- read carefully installation instructions for the ROMs you want to try
- avoid installation of experimental/ported ROMs as your first Custom ROM
- be careful what partition setup is needed for the ROM you want to install
- don't change default CM kernel for CM10.2 and up

Status 0
Status 0 means that you have a wrong script (for your phone). The script in "/META-INF/com/google/android" folder. I doubt that it's the ROM's problem. I also flashed CyanFox 4.4 for Galaxy S II. But had to flash CWM 6.0.4.x first. It worked only then, it didn't even flash using CWM 6.0.3.
So I think you can also flash CWM 6.0.4.x on your cappy and try this?