Hi, I'm stuck with installing new rom, so I hope, that you'll help me.
There are steps what I've done:
- followed THIS topic and ROOT the device with ODIN and CF-Root 4.4 file.
- OKAY, I'm rooted, so let's flash the new ROM
- entered in Clockworkmod Recovery and format EVERYTHING ( /data, /system, /cache, /sdcard etc.... just everything) for clear system
- next I load package with ROM and than INSTALLL
and here is the most important part
- when installed ROM gets something like bootloop but with restart - ROM is loading and after about 40 sec its RESTART
- and the same thing over and over again - restart ->loading->restart.... System never start up correctly to the end
- then when I saw that it does not work, I tried go into the CWM, but there was no CWM (!!!) - it was erased (by installing new ROM maybe???)
- so I must flash (old and stock) ROM via ODIN and again root device with CF-Root (with CWM) - that was only functional rom, what I was able to run, and again did this procedure
I tried this way, perhaps with millions of different ROM and EVERY was stucked (restart) while loading.
I think there are some non-deleted files in device, which should be erased (and which cannot be erased by CWM) for clear start of new installed ROM, what do you think?
Would someone please help me? I don't want old Gingerbread with Kies
Thanks for every responce!
Does it say in the thread that you have to flash a custom kernel?? Give.me the link for the thread so I can make sure that you've done everything right
Sent from ma 5assak
there is a link, but in hypertext THIS, i repost it in full text:
http://forum.xda-developers.com/showthread.php?t=788108
I think, when I've root and CWM, there is no problem and install a new rom will be very least, so not as it seems
Dude this is a kernel not a rom what's the matter with you??:what:
Sent from ma 5assak
please read all my topic - i flash this kernel only for clockworkmod recovery
through CWM I can flash any other rom
through ODIN only stock - cant find any ICS or JB rom which I can flash via ODIN (.tar file)
What variant of i9000 do you have? Are you sure that the rom you are trying to flash is made exactly for your variant?
EDIT: Try Darky ROM, they have an ODIN flashable version called "Resurrection Edition" or something.
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Samsung Galaxy S I9000, i'm sure 100%. NOT I9001, NOT Samsung Galaxy S2. Tried many roms from Development section for I9000, tried from get.cm etc... always the same result bootloop with restart
donhashem.dh said:
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Click to expand...
Click to collapse
OK. For example: this rom cm-9.0.0-galaxysmtd and cm-9-20120815-NIGHTLY-galaxysmtd from http://get.cm/?device=galaxysmtd
Or this one last ([ALPHA][ROM][4.1.1] CyanogenMod 10 for Samsung Galaxy S) http://forum.xda-developers.com/showthread.php?t=1778526 and 20120808 build.
and [ROM][PORT][ANDROID 4.1.1][BETA] TAJB: Jelly Bean port for Galaxy S V7.1 http://forum.xda-developers.com/showthread.php?t=1747042
and this too [4.0.4][ROM] Dark Knight 5.5 [27/4/2012] http://forum.xda-developers.com/showthread.php?t=1510940
and many more....
realy unhappy from this
Nikishek said:
Samsung Galaxy S I9000, i'm sure 100%t
Click to expand...
Click to collapse
I meant I9000 or I9000B or I9000M or I9000T there's a difference between them
I9000 only, checked it several times
Ok so you can flash Darky Rom Resurrection Edition through ODIN with no problem. Its GingerBread if i remember correctly, but it should give you a recovery mode and fully operating phone. From this point you can flash whatever you want.
....And there is one more important thing:
When I have a stock kernel and stock rom from Samsung, cant get into recovery mode - VOLUME UP and POWER non functional. Only when I type: "adb reboot recovery" in terminal.
Just after when I flash a new pre-rooted kernel with CWM, VOLUPE UP and POWER is now functional
k4Z3666: OK, I try and give you an echo I think, when I format everything in CWM, there will be no sign of the earlier system and ALL WILL BE CLEAR
Nikishek said:
I9000 only, checked it several times
Click to expand...
Click to collapse
ok, flashing ICS, may need to be done twice, as first flash may bootloop, IF you want to return to stock to get out of this mess, since you are not sure as to where you are now, due to flashing many roms, use any kit from My Android Collections, link below to get you to a booting ROM, than add a kernel with CWM (use EZbaze package with kernels)
that's helped me too thank you
Sent from my GT-I9000 using xda app-developers app
Related
Hi there,
Since gingerbread with most probably be the last update for SGS i would like to install a custom mod.
Now i have been trying to do this (darky 10 RC4) for the past 2 days.
I followed Darky's instructions then i had a problem with the CWM only accepting "edified" script.
So i downloaded rom manger and tried to downgrade ta 2.5 but as soon as i tap on the 2.5 it immediately comes up with an error, "an error occured while flashing your recovery."
this is done on a 2.3.3 JVB SGS with CWM 3 installed (orange text).
Are there alternate routes? maybe downgrading to android 2.2 installing an older version of darky and than upgrading the darky rom?
any help is much appreciated.
thanks
Download the rom CWM-zip and put it in your internal sdcard.
Download some froyo-kernel (yes, froyo) with CWM 2.5. Speedmod for example. Then flash it with Odin repartition and auto-reboot unticked. When the flashing process is completed, pull the battery and then boot to recovery (3 button combo). Now you have CWM 2.5 and you can flash the CWM-zip from there.
thanks, i wil try that.
Now you have CWM 2.5 and you can flash the CWM-zip from there.
Click to expand...
Click to collapse
just 1 question, why do i need t flash CWM-zip if i am already on CMW 2.5?
jan-sgs said:
thanks, i wil try that.
just 1 question, why do i need t flash CWM-zip if i am already on CMW 2.5?
Click to expand...
Click to collapse
Sorry. With CWM-zip I meant the Darky's Rom.zip, which can be flashed through CWM.
it didnt work, u just gave up.
hopefully some new rom update that is edified will show up in a couple of months
Install supercurio hacked kernel, it has recovery 2.5 instead of 3.0.0.5. From there you should be able to install darky's rom. If the new version of his kernel is recovery 3, tell me i'll send the old one just for the purpose.
Hi,
ok last attempt
i flashed ( odin PDA, no pit and no repartition) with this link:
Kernel Download:
Gingerbread-GT-I9000-stock-kernel+hacks.tar
http://forum.xda-developers.com/showthread.php?t=975349
while i was on
PDA_I9000XWJVB - PHONE_I9000XXJVK - CSC_I9000XEEJV3
rooted with root CF-Root-XX_OXA_JVK-v3.1-CWM3RFS
and lag fixed with CF-Root-ext4-v1.2
and it forking worked red text 2.5 THANKS A BUNCH!
edit just a problema. it is only booting in CWM.
reattempting this without the lag fix.
2nd attempt with PDA_I9000XWJVB - PHONE_I9000XXJVK - CSC_I9000XEEJV3
and without lag fix not rooting.
phone stuck looping at booting with strange sound on each boot loop
3rd attempt with rooting, but no lagfix
If you are only rebooting in recovery, did you flash the new kernel, then reboot recovery ? if yes, the easy way to get out, is to reboot in download then reflash the wanted kernel (Since your rom is installed, you can install any kernel (GB of course)) then, it will reboot in recovery again and just reboot system now. This should fix your problem.
edit : Dont forget to get CF-root 3.1 for JVB and not JVK.
chadouming said:
If you are only rebooting in recovery, did you flash the new kernel, then reboot recovery ? if yes, the easy way to get out, is to reboot in download then reflash the wanted kernel (Since your rom is installed, you can install any kernel (GB of course)) then, it will reboot in recovery again and just reboot system now. This should fix your problem.
edit : Dont forget to get CF-root 3.1 for JVB and not JVK.
Click to expand...
Click to collapse
ok, i couldnt do that before because i had deleted the rom form the internal SD.
and also thanks for pointing out that i had the wrong root (i worked by you never know if it could case problems)
ok so
PDA_I9000XWJVB - PHONE_I9000XXJVK - CSC_I9000XEEJV3
root CF-Root-XW_XEE_JVB-v3.1-CWM3RFS
lagfix CF-Root-ext4-v1.2-Addon
and
Gingerbread-GT-I9000-stock-kernel+hacks
and the zip is in progress.
ps it wasnt stuck the previous time, i was pressing the middle key as the selection while i should have been pressing the power button.
thanks for your help very much appreciated.
if i get some free time i will write at tutorial since i could not the solution.
This isn't development, moved to Q&A
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
Status 0 is due to having wrong CWM on you phone, likely you are on ICS ROM and using JB kernel and trying to Flash JB ROM
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
This is a kernel based on the pawitp's one and it works for Android 4.1.1 JB ROMs.
This version works for Jelly Bean ROMs
Click to expand...
Click to collapse
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
Which date on nightly you trying to install
Sent from my GT-I9000 using xda premium
thanks for so fast answer
I tried the newest version 'experimental' (10/8) and next one "nightly" (10/3), but it looks that the problem are not in ROMs. I tried c-rom, tsunami and there is the same problem.
przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
yes kernel will work but CWM does not, so flash the ICS kernel to solve your problem , you are currently on ICS, so use ICS kernel and upgrade to JB, once in JB , use JB kernel
sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?
przemek211 said:
sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?
Click to expand...
Click to collapse
One you have an ICS kernel, your CWM will be able to Flash a JB ROM in recovery, once you have a working JB ROM, its up to you , IF you would like to have JB Kernel , just Flash that
thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?
przemek211 said:
thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?
Click to expand...
Click to collapse
use Semaphore kernel manager for JB http://forum.xda-developers.com/showthread.php?t=1886686
Ok, so again: thank you and sorry for my mistake in your nick @xsenman
Greetings from Poland for Republika ng Pilipinas
sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.
przemek211 said:
sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.
Click to expand...
Click to collapse
just check if you still have your IMEI, if not use a solution from My Android Solutions to fix it
BUT make sure you inserted your sim card in the correct direction
No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.
przemek211 said:
No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.
Click to expand...
Click to collapse
NO, all you need to do is , was written in above link
1) Download Root Explorer from Play Store and use it to
2) Search you internal SD card for sdcard/backup/efs
3) Copy nv_data.bin, nv_data.bin.md5 and nv.log paste them into /efs in your Phone memory
4) Reboot to get back your original IMEI
or
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!
alireza7991 said:
First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!
Click to expand...
Click to collapse
you can flash a CWM 6.0 or TWRP 6.0 to recover , IF your current TWRP is bad ,
xsenman said:
2) Search you internal SD card for sdcard/backup/efs
Click to expand...
Click to collapse
I don't have this backup folder
przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
if you have cwm(any version)
you can install whatever rom you have
if you are on other bases like GB or ICS and trying to install JB or new versions of cm10
you should do the installing process three times
there will be an error after first try and on the second it will install but you will get bootloop and you have to take out battery put it back and boot to recovery with three button combo and start the third time of install process after that do a restart and you are done
good luck :good:
thanks for your reply, but I solve that problem with @xsenman help. Now I have issue with mobile network.
@xsenman: i understand that i need to install old rom from your post and just make upgrade to ics? Or should I make any other steps in this tutorial?
Hello my frend.°
Yesterday i got my galaxy note and i thought about flashing safe kernel, so i flashed it.
I fallowed this tutorial :
1A.Root + safe kernel + advance recovery. [Recommended method]
Here this will not just root your device but also add safe kernel (patched for mmc erase cap command) so you can safely wipe your device. as well gives you advanced recovery with it you can flash flashable zip files, nandroid backup/restore and more.
All credit goes to Phil3759 for awesome work.
Visit this thread
http://forum.xda-developers.com/show....php?t=1901191
And download kernel in zip format according ROM you are having on device.
-Copy downloaded file to Ext SD card to root directory
-Reboot into recovery (vol up+Home+power)
-Select install(update) zip from ext SD card
-select '[your downloaded kerenel].zip' which you have copied to Ext card above
-Reboot device
Now you will have Root + safe kernel
Click to expand...
Click to collapse
And i got in CWM - thats for sure, i got CWM 6.0.3.0 based recovery and kerlel called - 4.90.8 n7000, so i thought it was okey and i rebooted my sistem, but it is not booting to it. It boots only till "Samsung Galaxy Note N7000" logo and then are black screen. After few tries and thought to get factory reset - but the same result - nothing after that logo ...
So, what i have missed?
I am safe to flash Custom Rom or i have bricked my device?
ASAP...
Guess: you didn't choose the correct kernel for your Rom.
So please tell us what Rom did you have.
And no, you didn't brick your device. If you would install the correct kernel, your Rom would boot again - assuming you didn't do anything wrong in the meantime.
But anyway: this this kernel you can install a Custom Rom you want (TW-based). If you want a CyanogenMod-based Rom follow the installation instructions for these roms
Ok, now i flashed "Varum ROM" and sems it is working ... but a little bit laggy ...
emilz23 said:
Ok, now i flashed "Varum ROM" and sems it is working ... but a little bit laggy ...
Click to expand...
Click to collapse
I'm not being funny, BUT YOU SHOULD NOT BE MESSING ROUND UNTIL you do a lot of reading on rooting and how the various parts of your o/s work together.
Just jumping in is the most stupid thing to do. Read, read, read, oh and read. After a month then try doing stuff.
Sent from BOX13.
emilz23 said:
Hello my frend.°
Yesterday i got my galaxy note and i thought about flashing safe kernel, so i flashed it.
I fallowed this tutorial :
And i got in CWM - thats for sure, i got CWM 6.0.3.0 based recovery and kerlel called - 4.90.8 n7000, so i thought it was okey and i rebooted my sistem, but it is not booting to it. It boots only till "Samsung Galaxy Note N7000" logo and then are black screen. After few tries and thought to get factory reset - but the same result - nothing after that logo ...
So, what i have missed?
I am safe to flash Custom Rom or i have bricked my device?
ASAP...
Click to expand...
Click to collapse
You read to find a kernel that matches your Rom. Or something that is near to it.
http://forum.xda-developers.com/showthread.php?t=1901191
Read the original Philz thread. 2nd post let you know how to chose kernel. Get the right one and it will solved the problem. Provided nothing wrong is done to your phone.
I readed all kind of posts and i rooted my device with Philz method. Now i had been jumping around in various roms, seems all is working. So thanks for that,
P.s. I have been rooting and moding things since 2009, started with HTC and now went to Samsung club (galaxy s2, s3 and now note) ... so i thing i know what im doing ...
And i fallow instructions how to flash rom propertly so ... all is good for now ... (tfu, tfu, tfu) ...
And Have a nice Esters
Hi everybody,
just got an old yet effective SGS and I wanted root and get rid of touchwizz and all the crap from my carrier
I was unable to boot into DL mode, i tried everything, so I had to do it with adb reboot
I never had to use Odin to do my hacking with android so i'm not used to it but short story : I rename my rom.zip into rom rom.tar, it failed and all I have is this now :
https://www.dropbox.com/s/wk42jbmp33a3ftu/IMG_20140715_152917.jpg
Also I need to unsimlock, flashing a new rom will also do the trick right ?
thanks
What you just did is bricking your phone. It it was a zip file you need to install it from the recovery. Renaming it is not the way it works. I'm not sure if now you can fix it. Sorry, man
Sent from my GT-I9000 using XDA Premium 4 mobile app
Do you know what I can at least try?
If you can get into download mode:
Follow sections 2 and 3 in this guide.
If you can't:
Follow this guide and after that do what I sails to do if you have download mode.
Does 3-button-combo not work to get into the download mode?
(power & home & volume down)
tetakpatalked from Nexus 7 flo
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
@Idealith simlock has nothing to do with the firmware.
You need now any root kernel for that firmware, it has to be compatible with the intiframs of your 2.x version and it will give you a custom recovery.
There you can flash first CM10.2 to get the modified partition sizes and KK ready recovery and after that you can flash CM11
IMHO, the new Mackay ICS 2014 rom based on CM9 is a lot faster than any KitKat and works better on the i9000
tetakpatalked from N7100
my question about the rom still applies cause this one is awful
but with what does it have to do then ?
EDIT : my browser didn't render the end of your answer
I'm afraid i'm not following though :/
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Idealith said:
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Click to expand...
Click to collapse
Hey, could you tell me which country you are at? I could then take a few steps to help you
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Idealith said:
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Click to expand...
Click to collapse
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
tetakpatak said:
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Idealith said:
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Click to expand...
Click to collapse
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
tetakpatak said:
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
Click to expand...
Click to collapse
and how do i get that bootloader set up ?
Idealith said:
and how do i get that bootloader set up ?
Click to expand...
Click to collapse
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
tetakpatak said:
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
Click to expand...
Click to collapse
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Idealith said:
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Click to expand...
Click to collapse
Ask your carrier, I assume the phone contract isn't new anymore (or expired) so you'll get unlock code for free. Here in Europe one can obtain the unlock code after 2 years for free.
Otherwise you can ask one of the online unlock services, it costs usually around 15-20$ to get the code
tetakpatalked from N7100
Idealith said:
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
Click to expand...
Click to collapse
I'm glad that the JIG helped you (I know I'm late )
danielbe said:
I'm glad that the JIG helped you (I know I'm late )
Click to expand...
Click to collapse
yeah that worked like a charm
it was a good idea to buy it, i would have use the resistors so much
is there a more xda way to unlock it ? my carrier wants me to send the phone and have it unlock, they won't just provide the code :/
Greetings !
Ok, lets start this here
Since i got my new Samsung GALAXY MINI (GT-S5570) i had a bad stock on it, with wi-fi errors, auto restarts, and other problems i was facing with... So i decided to flash and root my phone.
I followed some of the tutorials given by members here on this forum, and i successfully managed to root my phone, and install a new rom onto it !
- I used this rom to flash my Samsung Galaxy Mini (GT-S5570) GINGERSLEEK, was working fine and other, i was satisfied with it, but after some time it got boring and i decided to flash a new rom into the phone. This is where i fcked up... After i found a new rom i waned to flash, i did all the steps i am supposed to do ?
I found this rom VOID ROM and followed his steps how to flash, after i done all of that, and installed the new ROM, my phone didnt want to boot, it got stuck on the " A N D R O I D" boot logo... So after trying to go back to GINGERSLEEK, i couldnt, i installed it, and nothing happens, again stuck on the "ANDROID" boot logo...
So i tried to flash my phone to a stock rom, i had so many problems with ODIN to flash it to stock rom . When i flashed with odin i had a error, it couldnt flash, i was disappointed ... So i used google to find a solution, i was lucky and i landed on some forum where they said i have to flash "arm11boot"... It was kinda weird, why should i do that, but after i did it, everything started to work on ODIN and i could FLASH my phone to the STOCK ROM of Samsung Galaxy Mini!
So i wonder now, since my phone is back to a stock ROM am i able to FLASH it to THIS ROM (VOID) and root it without any problems, and if it is possible if some one could copy/paste me the steps how to flash it and how to root it successfully !
Thank you very much for your help ! :angel:
torQ7u said:
Greetings !
Ok, lets start this here
Since i got my new Samsung GALAXY MINI (GT-S5570) i had a bad stock on it, with wi-fi errors, auto restarts, and other problems i was facing with... So i decided to flash and root my phone.
I followed some of the tutorials given by members here on this forum, and i successfully managed to root my phone, and install a new rom onto it !
- I used this rom to flash my Samsung Galaxy Mini (GT-S5570) GINGERSLEEK, was working fine and other, i was satisfied with it, but after some time it got boring and i decided to flash a new rom into the phone. This is where i fcked up... After i found a new rom i waned to flash, i did all the steps i am supposed to do ?
I found this rom VOID ROM and followed his steps how to flash, after i done all of that, and installed the new ROM, my phone didnt want to boot, it got stuck on the " A N D R O I D" boot logo... So after trying to go back to GINGERSLEEK, i couldnt, i installed it, and nothing happens, again stuck on the "ANDROID" boot logo...
So i tried to flash my phone to a stock rom, i had so many problems with ODIN to flash it to stock rom . When i flashed with odin i had a error, it couldnt flash, i was disappointed ... So i used google to find a solution, i was lucky and i landed on some forum where they said i have to flash "arm11boot"... It was kinda weird, why should i do that, but after i did it, everything started to work on ODIN and i could FLASH my phone to the STOCK ROM of Samsung Galaxy Mini!
So i wonder now, since my phone is back to a stock ROM am i able to FLASH it to THIS ROM (VOID) and root it without any problems, and if it is possible if some one could copy/paste me the steps how to flash it and how to root it successfully !
Thank you very much for your help ! :angel:
Click to expand...
Click to collapse
Follow this:
1. Make sure you have got gingerbread installed on your galaxy mini/pop s5570.
2. Get root.zip for stock gb(search for that root zip here in galaxy mini section) and flash it via stock recovery.
3. Download this file " update-CWM-5.2.0.8-Touch2-squadzone.zip"(again check galaxy mini section for this zip, don't flash any other phone's recovery, otherwise it'll hard brick your phone, be careful in choosing recovery, it has to be tass compatible recovery) and flash it via stock recovery and restart recovery.
4. Make wipes as recommended by void rom thread and install it. You are good to go after that.
Sent from my GT-S5570 using XDA Free mobile app
Venkatesh said:
Follow this:
1. Make sure you have got gingerbread installed on your galaxy mini/pop s5570.
2. Get root.zip for stock gb(search for that root zip here in galaxy mini section) and flash it via stock recovery.
3. Download this file " update-CWM-5.2.0.8-Touch2-squadzone.zip"(again check galaxy mini section for this zip, don't flash any other phone's recovery, otherwise it'll hard brick your phone, be careful in choosing recovery, it has to be tass compatible recovery) and flash it via stock recovery and restart recovery.
4. Make wipes as recommended by void rom thread and install it. You are good to go after that.
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
Apparently i don't have stock recovery on my phone, its not even flashed or rooted, it's just stock rom 2.3.6
if someone could provide me with some links how to flash/root my phone, because i really would like to install that VOID rom.. its looks so awesome !
torQ7u said:
Apparently i don't have stock recovery on my phone, its not even flashed or rooted, it's just stock rom 2.3.6
if someone could provide me with some links how to flash/root my phone, because i really would like to install that VOID rom.. its looks so awesome !
Click to expand...
Click to collapse
Every phone has a default recovery which we call it "stock recovery".
You should look at sticky threads in galaxy mini android development section.
Sent from my GT-S5570 using XDA Free mobile app