Galaxy Ace S 5830M Bootloop - Galaxy Ace S5830 Q&A, Help & Troubleshooting

Hello,
I have a friend with a Non-Rooted, totally stock Galaxy Ace s5830M that's stuck on a boot loop. He was playing a game and the screen started flashing and it rebooted. It is now stuck in a boot loop.
I've been able to get in to Stock Recovery and in to Download mode without issues.
We tried to flash Clockwork Mod Recovery. It apparently succeeds , but when we reboot it does not "stick". Flash CWM,reboot and it just shows the Stock recovery menu. I found this thread, regarding this issue.. But this phone is completely stock, bought on Amazon and shipped to Venezuela. I think it was running Gingerbread.
We then tried to flash to a Stock Firmware from my country from Sammobile.com with Odin.
Once a single file recovery ( a large file with a md5.tar extension) and it fails:
<ID:0/037> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830MWHLA1_S5830MUUBLA1_S5830MWHLA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/037> Odin v.3 engine (ID:37)..
<ID:0/037> File analysis..
<ID:0/037> SetupConnection..
<ID:0/037> Initialzation..
<ID:0/037> Get PIT for mapping..
<ID:0/037> Firmware update start..
<ID:0/037> sbl.bin
<ID:0/037> NAND Write Start!!
<ID:0/037> BcmCP.img
<ID:0/037>
<ID:0/037> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Then we tried another solution from another site, flashing a multiple file firmware (BOOT, PDA and PHONE). We get this result, apparently it is succesful:
<ID:0/037> Added!!
<ID:0/037> Odin v.3 engine (ID:37)..
<ID:0/037> File analysis..
<ID:0/037> SetupConnection..
<ID:0/037> Initialzation..
<ID:0/037> Set PIT file..
<ID:0/037> DO NOT TURN OFF TARGET!!
<ID:0/037> Get PIT for mapping..
<ID:0/037> Firmware update start..
<ID:0/037> BcmBoot.img
<ID:0/037> NAND Write Start!!
<ID:0/037> HEDGE_NVRAM8_RF_LE.bin
<ID:0/037> sysparm_dep.img
<ID:0/037> system.img
<ID:0/037> boot.img
<ID:0/037> param.lfs
<ID:0/037> sbl.bin
<ID:0/037> BcmCP.img
<ID:0/037> Transmission Complete..
<ID:0/037> Now Writing.. Please wait about 2 minutes
<ID:0/037> Receive Response form LOKE
<ID:0/037> RQT_CLOSE !!
<ID:0/037> RES OK !!
<ID:0/037> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/037> Removed!!
Click to expand...
Click to collapse
When we reboot the phone, we now get a boot screen that says the device is a S5830C instead of a S5830M. But it's still stuck on the Samsung logo at boot.
We really don't know what else to try. Any ideas? Is this phone bricked?
Thanks,
Rafael

Factory reset ur phone from recovery & wipe cache. Also, U need to place the individual firmware files at correct fields in odin (hope U did that) otherwise ur phone'll not be able to boot properly.
As far as I know there are four files (BOOT, PHONE, PDA, CSC) in full package & only one file (of extension:- tar.md5) in One Package firmware...
Sent Via XDA Premium

Galaxy_Rohit said:
Factory reset ur phone from recovery & wipe cache. Also, U need to place the individual firmware files at correct fields in odin (hope U did that) otherwise ur phone'll not be able to boot properly.
As far as I know there are four files (BOOT, PHONE, PDA, CSC) in full package & only one file (of extension:- tar.md5) in One Package firmware...
Sent Via XDA Premium
Click to expand...
Click to collapse
U managed to screw the phone ... It was as simple as as factory reset you were lucky! You could have hard bricked is ace ! Flash a proper rom to 5830 M and the enter STOCK RECOVERY! and do wipe data!
Sent from my GT-I9830 using xda premium

Yep, that's the first thing we did, we did a wipe data and wipe cache.
Here are the steps we took when flashing via Odin.
Settings we used:
Files we used to flash:

marcano said:
Yep, that's the first thing we did, we did a wipe data and wipe cache.
Here are the steps we took when flashing via Odin.
Settings we used:
Files we used to flash:
Click to expand...
Click to collapse
U used odin for 5830i ...
Sent from my GT-I9830 using xda premium

You need to do a hard reset after flashing the stock rom.
Enviado desde mi LG-P350 usando Tapatalk 2

SnowPluralism said:
U used odin for 5830i ...
Sent from my GT-I9830 using xda premium
Click to expand...
Click to collapse
The S5830i, S5830C, S5830M and S5839i are the same aka cooperve.
The only difference is the region, this version of Odin works with S5830M too!
Anyway, this rom you flashed is from Brazil, and works with your phone too. Try a wipe data/factory reset on recovery, this maybe works.
You should have a look at S5830i Development and S5830i General, there you will find more answers about your phone.

Stock ROM for SGA 5830M
marcano said:
Hello,
I have a friend with a Non-Rooted, totally stock Galaxy Ace s5830M that's stuck on a boot loop. He was playing a game and the screen started flashing and it rebooted. It is now stuck in a boot loop.
I've been able to get in to Stock Recovery and in to Download mode without issues.
We tried to flash Clockwork Mod Recovery. It apparently succeeds , but when we reboot it does not "stick". Flash CWM,reboot and it just shows the Stock recovery menu. I found this thread, regarding this issue.. But this phone is completely stock, bought on Amazon and shipped to Venezuela. I think it was running Gingerbread.
We then tried to flash to a Stock Firmware from my country from Sammobile.com with Odin.
Once a single file recovery ( a large file with a md5.tar extension) and it fails:
Then we tried another solution from another site, flashing a multiple file firmware (BOOT, PDA and PHONE). We get this result, apparently it is succesful:
When we reboot the phone, we now get a boot screen that says the device is a S5830C instead of a S5830M. But it's still stuck on the Samsung logo at boot.
We really don't know what else to try. Any ideas? Is this phone bricked?
Thanks,
Rafael
Click to expand...
Click to collapse
Hi Rafael. OK, I have made a detailed how to in Taringa that specifies the way to install a Stock ROM for SGA GT-S5830M. Just search in google "tutorial flashear samsung galaxy ace 5830m con odin - Taringa!" (without quotation marks) and enter the first result, it would redirect you to my post, check that the name of the creator is "jhonaff", if so, just download the files from there, and flash them via Odin 1.85 or 1.87. In the post there is a link to download the version 1.85, this version of Odin is the one that works perfectly with this device. Following that steps I gave life again to my SGA 5830M.
After you download, unzip the files in the S5830M.rar archive, you will get three .tar.md5 files; now put the files in the following order in Odin:
BOOTLOADER -> leave this section empty.
PDA -> select the PDA file.
PHONE -> select the MODEM file.
CSC -> select the CSC file.
Now click Start button and wait for the process to finish; at the end of the process the phone will reboot in recovery automatically and it will run a script, don't unplug it, and don't do anything yet. The phone will reboot once more and now it will pass the Samsung logo and will show you the Samsung bootanimation. Now you can unplug it and wait, the first boot may take 1 or 2 minutes and you will get your phone alive again.
PD: I can't give you a link to my post cause I'm new in this site and I don't have 2 posts here, so I can't post links in my replies.
PD2: My post in Taringa is in Spanish, I think it is understandable, but if not, use a traductor, after all you just want to download the correct files.
I hope this can help you. I speak spanish and has been years from the last time I spoke in English, so forgive me if something is wrote incorrectly.

Thank you jhonaff2
jhonaff2 said:
Hi Rafael. OK, I have made a detailed how to in Taringa that specifies the way to install a Stock ROM for SGA GT-S5830M. Just search in google "tutorial flashear samsung galaxy ace 5830m con odin - Taringa!" (without quotation marks) and enter the first result, it would redirect you to my post, check that the name of the creator is "jhonaff", if so, just download the files from there, and flash them via Odin 1.85 or 1.87. In the post there is a link to download the version 1.85, this version of Odin is the one that works perfectly with this device. Following that steps I gave life again to my SGA 5830M.
After you download, unzip the files in the S5830M.rar archive, you will get three .tar.md5 files; now put the files in the following order in Odin:
BOOTLOADER -> leave this section empty.
PDA -> select the PDA file.
PHONE -> select the MODEM file.
CSC -> select the CSC file.
Now click Start button and wait for the process to finish; at the end of the process the phone will reboot in recovery automatically and it will run a script, don't unplug it, and don't do anything yet. The phone will reboot once more and now it will pass the Samsung logo and will show you the Samsung bootanimation. Now you can unplug it and wait, the first boot may take 1 or 2 minutes and you will get your phone alive again.
PD: I can't give you a link to my post cause I'm new in this site and I don't have 2 posts here, so I can't post links in my replies.
PD2: My post in Taringa is in Spanish, I think it is understandable, but if not, use a traductor, after all you just want to download the correct files.
I hope this can help you. I speak spanish and has been years from the last time I spoke in English, so forgive me if something is wrote incorrectly.
Click to expand...
Click to collapse
Thank you very much jhonaff2, you solved my problem after some days
I know it is not related to this post, but do you know how can I enable my 3G radio in US T-Mobile? I can only get their 2G services

geniusbabak said:
Thank you very much jhonaff2, you solved my problem after some days
I know it is not related to this post, but do you know how can I enable my 3G radio in US T-Mobile? I can only get their 2G services
Click to expand...
Click to collapse
we have same problem in 3g. i can only get 2g services

Related

[Q] My note is Stuck on Galaxy Note GT-N7000 on boot

Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess
clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)
Balbaroth said:
Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess
Click to expand...
Click to collapse
Same thing happen me too, i was flashing KL3 from CM9 build, even if flash through PC odin also i got Samsung screen boot loop. then i did clean wipe, everything went fine after wipe.
dr.ketan said:
clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)
Click to expand...
Click to collapse
did cleared the cache ,
and the dalvic cache ( which says no such files or directory )
after i tried the wipe data , still no success...
im stuck on Samsung Galaxy note GT-N7000 logo ,
is there any particular order you have to do to restore ?
Ranjan : i dont think my note boot loop as ive experienced on rocket rom a few times hehe , its just stuck at the black screen with the white Samsung Galaxy note GT-N7000 written on it when i power up
or if im too dumb to solve this , i would send it to repairs but cant find any place nearby , you guys know a place that do that kind of stuff ?
i appreciate the help thanks guys
You shud try to reflash it
Sent from my GT-N7000 using xda premium
dr.ketan said:
You shud try to reflash it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
you mean reflash using odin ?
when i use odin it download well it says no errors and reboot but still stuck , unless there is others ways beside odin
also i wanted to say when my root and cmw went fine i did a back up on it and it worked before , each time i try to restore it in the end at the data it says :
.android_secure.img not found and its bypassing that part
but says its done after , but doesnt boot too
Pull out the battery and replace after 10 seconds, then try flashing different ROM using PC Odin. while flashing do not Tick Re-partition and do not attach pit file.
If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.
SpecialStar said:
If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.
Click to expand...
Click to collapse
You Should be more specific
Flashing ANY Stock ROM with PC odin, don't raise counter.
Your reply shud be flashing custom ROM with PC odin counter will raise.
not ANOTHER
Right, sorry forget to mention
So he should just flash a STOCK ROM with Odin
thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair
Balbaroth said:
thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair
Click to expand...
Click to collapse
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.
ranjan.alva said:
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.
Click to expand...
Click to collapse
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone
Balbaroth said:
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone
Click to expand...
Click to collapse
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
did you install any custom ROM on it??
ranjan.alva said:
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
Click to expand...
Click to collapse
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory
Balbaroth said:
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory
Click to expand...
Click to collapse
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck
ranjan.alva said:
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck
Click to expand...
Click to collapse
ok will try LA3 ,
we are talking about this one right ?
N7000XXLA3 --------2.3.6------- 2012 January---N7000OXALA3--------------------Open Europe-----------------------
i found it using Dr.ketan signature
( huge thanks for the tutorial and the quick access to note roms )
im crossing my fingers and will keep you updated
, if by any chance it doesnt work ,and that i have to fix it , can you tell me where they service notes , in canada montreal its not even out yet lol
i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin
Richy99 said:
i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin
Click to expand...
Click to collapse
okay i flashed the la3 rom and still stuck lol darn ill try la4 then ,
it succeeded in odin pc and on the phone still says samsung official
im really out of options i guess , unreal im beginging to think it has others issues
is this place reliable for repairs ? http://repair-my-device.com or any other suggestions i cant find nothing beside that
EDIT : okay i tried the LA4 still doesnt boot up and stuck on the black screen with the samsung galaxy note gt-n7000 unless i go to cwm or download mode odin i cant do anything else ,
i was reading stuff and i was wondering if i jig could help ?
Was on a completely rooted Midnote.
wanted to try rocketrom ics. So went to recovery and flashed v 1.4, did a complete wipe before and after, but after that, the recovery module became unresponsive, so I force rebooted and the phone was stuck on boot screen "Samsung Galaxy Note 7000".
So I used PC odin and tried to flash the KL3 ROM but was stuck at factoryfs.img. Tried LA5 too, but same situation. Kindly help.
I am from Pune, India.

Help! Phone won't start!!

Hi all,
I was on the UK Stock 4.03 + Root....
I was trying to connect to a Blue-tooth Device today and the phone was frozen, so I turned it off....
When I tried to turn it back on...it won't go pass the "Samsang Galaxy Note" screen....(it would restart it self every time it reaches that screen)
I tried flashing it to the 4.0.4 German Stock via Odin...and the problem is still there....
is my phone BRICKED??
Please HELP~~!
THANKS!
Forgot to mentioned that when I was trying to reboot the phone for the first time....I had a USB Stick plugged into the phone...dunno if that was the cause of the problem
You said tried to flash 4.0.4, that is insufficient information
whether it was successfull or not?
do you rememeber wat exactly last msg ?
Did u try to completely remove the battery then reflash again stock ics through odin?
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗
Yeah...I did a flash of this Stock ROM "N7000XXLRG" from this page: http://forum.xda-developers.com/showthread.php?t=1424997.
The flash was SUCCESSFUL by Odin. However, When the phone rebooted after the flash the problem is still there (phone keep restarting once it reaches the "Samsung Galaxy Note" screen)
btw.. this is the log of the flash in Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.img
<ID:0/004> NAND Write Start!!
<ID:0/004> zImage
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Also...when I am trying to get into recovery mode....it shows the pic of the Android bot lying on the ground with a red triangle??
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
Thanks for your reply again....is there a SAFE instruction of how I can flash GB ROM by using Odin?
You meant a STOCK GB or CUSTOM one?
Does it matter if I flash the German one when I was on the UK one originally?
THANKS AGAIN
Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
ok...downloading now....will let you know the result soon....THANKS
DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!
dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
THANKS Doc.....by flashing the GB STOCK has solved the problem
How can I avoid this from happening in the future? Because I want to upgrade to ICS again
Final5k said:
DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!
Click to expand...
Click to collapse
No I didn't....where can I get that Kernel? and do I just flash it in CWM?
cheers for the suggestion
Congrats
It was likely to revive as i said it was seems to be a bootloop rather true brick
Dont worry it was just incidence, n not likely to repeat.
You can flash ics now safely. But first wipe cache and data before flashing ics if you have not perform it still.
Sent from my GT-N7000 using xda premium
Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072
Final5k said:
Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072
Click to expand...
Click to collapse
so....
1. this kernel works with any stock ICS ROM?
2. Does it affect any performances....for example making the phone laggy?
cheers

[Q] Please help me with my Note GT-N7000 (I might have bricked it)

My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
you give not detail as needed. but nevermine, from the last part it seems you has bricked your phone.
i think you might need to refer "hg42" thread to revive your note.
Sad to be hear that.
Sent from my GT-N7000 using xda premium
immediately contact dr.ketan
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
Contact dr.ketan for yr solution. He is the sweet n right person to guide u.
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
No luck...yet.
letters_to_cleo said:
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
Click to expand...
Click to collapse
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Reflash it with PC odin (Again? )... refer to Dr Ketan... I encounter same issues before, I just try try to reflash old GB... link at #4
khaino said:
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Click to expand...
Click to collapse
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Tried that, but not sure about the latest desktop version.
Alba Donzo said:
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Click to expand...
Click to collapse
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
Latest Odin is 3.0.4
Sent from my GT-N7000 using xda app-developers app
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar" or go here - https://www.dropbox.com/s/yoe791qq3atbung/AbyssNotekernel42CWTouchOriginalLogo.tar).
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Question!
Alba Donzo said:
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar"
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Click to expand...
Click to collapse
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
khaino said:
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
Click to expand...
Click to collapse
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Just a quick question.
Alba Donzo said:
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Click to expand...
Click to collapse
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
khaino said:
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
Click to expand...
Click to collapse
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Update.
forest1971 said:
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
khaino said:
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
Click to expand...
Click to collapse
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Update and question.
forest1971 said:
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Click to expand...
Click to collapse
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
khaino said:
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
Click to expand...
Click to collapse
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Update.
forest1971 said:
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Click to expand...
Click to collapse
Hi bro, it somehow managed to get on CWM and but any flashing was aborted. And tried to flash Criskelo, but got stuck at installing, no progress. What should I do? Thank you.
Just two options above, warranty or repartition.
Sent from my phone

[Q] Can only use 'Download Mode'

Hi guys and girls.
I've been frantically searching XDA for the last few hours for a definitive answer, but to no avail, so thought it's about time I just asked!
I have in my possession a Samsung Galaxy S19000, that will only go into download made.
Here's how it happened........
This morning, I was given the phone by my brother in law and asked to root it and upgrade it to a newer/better rom. When it was passed
to me, it was.....
Firmware: 2.2.1
Baseband: 19000XXJY
Kernel: 2.6.32.9
[email protected] #1
Build: FROYO.XXJPY
After a successful root and upgrade, the phone ended up like this...
Firmware: 2.3.7
Baseband: 19000XXJVK
Kernel: 2.6.35.14-g3088622
Build: CyanogenMod-7.2.0-galaxysmtd
The new Rom, as nice as it was, wasnt what he wanted, so he asked me to restore it back to it's stock state. I went into CMW and did a restore, but it failed, and now the phone will only go into download mode.
I've tried flashing a stock rom via Odin, but it got as far as the 'Nand write' stage, then hangs.
Kies doesn't show up the device in 'Emergency firmware recovery' either.
I no all is not lost, so I'm not giving up. Any help will be much appreciated.
:fingers-crossed:
Can you post the whole Odin Log?
Normally this happen when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
Maybe it helps to flash the pit file to repartition.
To add.....
When the phone is off, it displays the 'phone and computer with an explanation mark triangle inbetween symbol', and Kies doesnt recognise it. When I enter download mode, Kies hangs at 'Connecting' for.....well..ever! So atleast I know it's recognised by my PC (ish) and it isn't completely dead :silly:
I had the same thing with the triangle a few months ago.
I just flashed a Stock Firmware with Repartition. Just be sure with Odin that you have ticked the right things Afterwards it worked.
Thankyou for you reply, and sorry for the delay posting back. God damn new user restrictions!!!
KUN1 said:
Can you post the whole Odin Log?
Click to expand...
Click to collapse
Heres what Im getting...
Code:
<ID:0/009> Added!!
<ID:0/009> Removed!!
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.img
<ID:0/009> NAND Write Start!!
First try it with Repartition. If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
KUN1 said:
First try it with Repartition.
Click to expand...
Click to collapse
You'll have to excuse me, I've never had problems problems before, so I've only had to use the PDA box till now.....
Is that the re-partition tick box, or the re-partition PIT file box??
KUN1 said:
If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Click to expand...
Click to collapse
Christ that looks involved doesn't it! I think that be a last resort as it looks like I'll need to clear a day in my diary before I start!
For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.
KUN1 said:
For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.
Click to expand...
Click to collapse
SOLVED
I couldnt sleep, so decided to have another bash at getting this phone going again.
Many many thanks to KUN1 for hunting down and PM'ing me the necessary Odin MD5 and PIT files to use for the method he posted above.
:victory:Success:victory:
You've been a life saver sir :good:
haha no problem

[Q] Galaxy Note doesn't go beyond logo and stuck at Downloading.. PLZ HELP :(

Hello all,
I read now the warning post and I understand now that probably I shouldn't have done it (so please be gentle ).. however maybe someone can still help me with my situation:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA (maybe that was also a mistake?). After it was finished it restarted by itself and now its in the following status:
- stucks at GALAXY NOTE N7000 logo. Sometimes blinks, but never goes beyond it.
- Recovery mode exactly same - stuck at logo.
- when plugging USB it will show the battery, but it's like stuck then.
- Tried download mode, but it's stuck at Downloading... forever.
I couldn't find the exact case as mine, that it restarted by itself and stuck at logo now.
I backed up everything, the previous ROM and etc.
I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
And most importantly, what should I do now? Can I do something via the download mode? I don't think Odin recognizes any connected device when I plug in the USB, but I don't know how to check if it does or not..
Thanks in advance!
Switch to download mode, connect to PC and install a stock JB (be sure to install the USB drivers before).
Make a snapshot of the errors an post it here.
http://forum.xda-developers.com/showthread.php?t=1424997
May be this helps ...
Just flash a new stock rom..
Sent from my GT-N7000 using xda premium
i believe u use wrong kernal so it's stuck ! if u don't ever do any factory reset or wipes then u're stillsafe !
if u do so ? then just follow the instructions above given by the 2members here :p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation !
Trying
alvinhaw said:
i believe u use wrong kernal so it's stuck ! if u don't ever do any factory reset or wipes then u're stillsafe !
if u do so ? then just follow the instructions above given by the 2members here :p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation !
Click to expand...
Click to collapse
Trying all that right now, will keep you posted.
what is my stock ROM?
whatever61 said:
Trying all that right now, will keep you posted.
Click to expand...
Click to collapse
I don't understand this.. my stock ROM was:
Baseband Version: N7000XXLB2
Kernel Version: 2.6.35.7-N7000XXLC1-CL1003701 [email protected] #2
Build number: GINGERBREAD.XXLC1
I don't know what coutnry, I bought it from Netherlands, I live in Belgium, but it could be from any country in the region!
I cannot find this one exactly. I find many with N7000XXLB2 and many with N7000XXLC1.
Which one should I choose?
Also, can I install a JB or ICS directly?
Please let me know I'm doing it right (cause this is getting really insanely ridicilous):
1. I install PhilZ recovery mode via the phone recovery mode.
2. I install a stock ROM (I tried many) via Odin download mode.
All the time stuck as Galaxy N7000 logo. Never goes past it.
Every time I install a stock ROM it also removes the Philz recevory mode, but maybe that's ok..
Anything I'm doing wrong??
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
ThaiDai said:
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
Click to expand...
Click to collapse
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
whatever61 said:
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
Click to expand...
Click to collapse
Just let THAIDAI knows which stock rom u're flashing !
alvinhaw said:
Just let THAIDAI knows which stock rom u're flashing !
Click to expand...
Click to collapse
Ok, here we go.
I was trying with ROM: N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5
This is what I got from Odin (I hope that's what you meant by snapshot and not actual screenshot or something ):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.img
<ID:0/008> NAND Write Start!!
<ID:0/008> zImage
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
This is something new: just after it was completed it booted to recovery mode and gave me the following message:
Android system recovery <3e>
Finding update package
bla bla
Successfuly installed package.
Wiping cache..
Formatting /cache
Cache wipe complete.
E:failed to mount /data (unknown error: 0)
your storage not prepared yete, please use UI menu to format and reboot actions.
copy application failed.
Applying multi-CSC
Can't access to '/system/csc/ATO/system'
Successfully applied multi-CSC.
and it still doesn't boot.. gonna try another ROM now and post here the results.
Now tried with:
N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5
This is the original original ROM that I had when I just bought the phone.3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> zImage
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
No going into recovery mode after restart this time and still same problem.
when you flash a stock rom with pc odin, the phone may not boot. If you have flashed a GB rom then when you are stuck at logo enter stock recovery with three button combo and then wipe data factory reset, wipe cache and then reboot.
I flashed a stock rom as explained above, not a GB. I tried wiping cache and all data through recovery. Nothing helps. You say it might not boot, so how do I make it boot with Stock ROM?
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
rraaka said:
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
Click to expand...
Click to collapse
I already did, the last post was a GB, i tried to wipe out everything afterwards also.
ThaiDai, please see my replies, I did as you requested..
Thanks
whatever61 said:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA ...
....I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
Thanks in advance!
Click to expand...
Click to collapse
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
it might be mess up.. try get 5files wif bootloader n place it accordingly in odin .
go here to study http://forum.xda-developers.com/showthread.php?t=1424997
shoey63 said:
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
Click to expand...
Click to collapse
Yep, emmc bricked. Send it to servicecenter, they repaired it for free, for me. Or you can do the workaround http://forum.xda-developers.com/showthread.php?t=1667886 , but i dont would do that, as you will get many freezes maybe. Thats very annoying.
Regards

Categories

Resources