Can someone please help me? I installed CWM recovery 5.5 and now my phone always enters in it after powering up. Some kind of loop.I restart the phone...enters CMW...on and on.
I found a tutorial but it's for Asus transformer prime,and my phone won't cold boot. I tried Volume down + power,and i didn't find any tutorial how to cold boot i9001.
Can i fix the cwm loop? Can i go back to my old recovery ,the stock one?
SlingShot00 said:
Can someone please help me? I installed CWM recovery 5.5 and now my phone always enters in it after powering up. Some kind of loop.I restart the phone...enters CMW...on and on.
I found a tutorial but it's for Asus transformer prime,and my phone won't cold boot. I tried Volume down + power,and i didn't find any tutorial how to cold boot i9001.
Can i fix the cwm loop? Can i go back to my old recovery ,the stock one?
Click to expand...
Click to collapse
Your Bootloader is messed up.
1. Goto Downloadmode
2. Extract AriesVE.ops from Ariesve.zip and Insert AriesVE.ops @OPS in Odin
3. extract boot_loader.tar from bootloader.zip and insert boot_loader.tar in Odin @BOOT
4. Flash
Reboot and it should boot to Android
XeLLaR* said:
Your Bootloader is messed up.
1. Goto Downloadmode
2. Extract AriesVE.ops from Ariesve.zip and Insert AriesVE.ops @OPS in Odin
3. extract boot_loader.tar from bootloader.zip and insert boot_loader.tar in Odin @BOOT
4. Flash
Reboot and it should boot to Android
Click to expand...
Click to collapse
Can i send you a beer?
Thank you so much!
Next time, read the wiki before posting, I think that we have the most detailed wiki of all the phones...
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/GT-I9001
:good:
Thanks for the offer, but I do it for fun. I just like the principle users helping users.
But thanks
HI,
my phone is stuck in recovery reboots and also not entering the download mode. I have tried everything vol- + power, vol-vol+ + power nothing helping..
please help.
ntahmed said:
HI,
my phone is stuck in recovery reboots and also not entering the download mode. I have tried everything vol- + power, vol-vol+ + power nothing helping..
please help.
Click to expand...
Click to collapse
First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
Try a solution from My Android Solutions
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
XeLLaR* said:
Your Bootloader is messed up.
1. Goto Downloadmode
2. Extract AriesVE.ops from Ariesve.zip and Insert AriesVE.ops @OPS in Odin
3. extract boot_loader.tar from bootloader.zip and insert boot_loader.tar in Odin @BOOT
4. Flash
Reboot and it should boot to Android
Click to expand...
Click to collapse
Dear friend,
I have the same problem as the Author. I installed CMW v5.5.0.4 so I flash cyanogen ICS.
Anyway, I entered Downloadmode, I connected to Odin and did as you said.
As a result, when the phone is shut down
a. When I press the power button, "Samsung" logo appears, and then black screen forever. Then I remove battery.
b. When I press Vol Up + Power button, it enters CMW (but when I select "Reboot now" it goes samsung-blackscreen like"a"
c. When I press Vol down+power+home key, it goes to downolad mode (I did a 2nd time what you suggested, but Nothing improved).
Please help, I am desperate.
(samsung galaxy s plus i9001)
Eirwn said:
Dear friend,
I have the same problem as the Author. I installed CMW v5.5.0.4 so I flash cyanogen ICS.
Anyway, I entered Downloadmode, I connected to Odin and did as you said.
As a result, when the phone is shut down
a. When I press the power button, "Samsung" logo appears, and then black screen forever. Then I remove battery.
b. When I press Vol Up + Power button, it enters CMW (but when I select "Reboot now" it goes samsung-blackscreen like"a"
c. When I press Vol down+power+home key, it goes to downolad mode (I did a 2nd time what you suggested, but Nothing improved).
Please help, I am desperate.
(samsung galaxy s plus i9001)
Click to expand...
Click to collapse
****EDIT : I booted to CMW, and restored the backup I have made, and now it boots perfectly.
Sorry for the inconvinience. I don delete the post in case someone needs that info.
Question to the same problem
XeLLaR* said:
Your Bootloader is messed up.
1. Goto Downloadmode
2. Extract AriesVE.ops from Ariesve.zip and Insert AriesVE.ops @OPS in Odin
3. extract boot_loader.tar from bootloader.zip and insert boot_loader.tar in Odin @BOOT
4. Flash
Reboot and it should boot to Android
Click to expand...
Click to collapse
I have flash cwn 5.5 and i'mstuck in a recovery loop; i have put also the cm9 and gapps but still loop.The problem is that i cant modify the files with odin, the reason is the usb sumsung driver that otherwise is working but in downloading mode the phone cant conect with the pc) , so can i use somehow only the sd card and solve the recovery loop.Tx
zorkcas said:
I have flash cwn 5.5 and i'mstuck in a recovery loop; i have put also the cm9 and gapps but still loop.The problem is that i cant modify the files with odin, the reason is the usb sumsung driver that otherwise is working but in downloading mode the phone cant conect with the pc) , so can i use somehow only the sd card and solve the recovery loop.Tx
Click to expand...
Click to collapse
the recovery bootloop is normal for first flashing. please see wiki page
solved loop with cwn 5.5 on i9001
zorkcas said:
I have flash cwn 5.5 and i'mstuck in a recovery loop; i have put also the cm9 and gapps but still loop.The problem is that i cant modify the files with odin, the reason is the usb sumsung driver that otherwise is working but in downloading mode the phone cant conect with the pc) , so can i use somehow only the sd card and solve the recovery loop.Tx
Click to expand...
Click to collapse
I've put the cwn 6.0 and the problem is gone now, no loop,...works fine, ..i've tried some games/apps, and it seams that not all of them are working ,..but it's ok , the root and the ICS will do
i9001 bootloop
this is the only thing it worked for me:
Put this file on sdcard
Load it via recovery with "install from sdcard"
it will automatically reboot the phone
once solved, copy to sdcard and restore attached stock recovery.img or don't reboot into recovery again, as it will bootloop again:
from within phone, start terminal emulator and type:
su <enter>
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13 <enter>
of course, needs root
---
i installed supposed "stable" twrp 2.2.1 and it produced bootloop into recovery
don´t know if last twrp 2.4.1.0 or cmw 6.0.3.7 for stock roms will solve it but i won't try, i restored stock recovery.img from a backup i made with "online nandroid backup"
bootloop is veeeeeeery common in i9001, the fix above that worked for me erases (fills with zeros) param partition mmcblk0p14, a partition for temporary commands that non-stock recoveries don't erase before rebooting and cause bootloops
manocao said:
this is the only thing it worked for me:
Put this file on sdcard
Load it via recovery with "install from sdcard"
it will automatically reboot the phone
once solved, copy to sdcard and restore attached stock recovery.img or don't reboot into recovery again, as it will bootloop again:
from within phone, start terminal emulator and type:
su <enter>
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13 <enter>
of course, needs root
---
i installed supposed "stable" twrp 2.2.1 and it produced bootloop into recovery
don´t know if last twrp 2.4.1.0 or cmw 6.0.3.7 for stock roms will solve it but i won't try, i restored stock recovery.img from a backup i made with "online nandroid backup"
bootloop is veeeeeeery common in i9001, the fix above that worked for me erases (fills with zeros) param partition mmcblk0p14, a partition for temporary commands that non-stock recoveries don't erase before rebooting and cause bootloops
Click to expand...
Click to collapse
AMAZING!!! You are a lifesaver. :highfive:
I had bricked my Galaxy S Plus after flashing TWRP which caused a recovery bootloop. I tried using download mode to reflash bootloader using Odin but my PC said "USB device not recognized". I tried tons of drivers, factory resets/system format(which was a bad decision), different cables and even PCs but I couldn't get my device recognized at all. I thought the phone was a paperweight now but I finally found your post and successfully booted my phone to unofficial CM12 without any problems!
Thanks a lot once again!! :laugh::good:
haha
perfect it worked for you! another smartphone saved!!
nice my explanation helped you!
you are welcome
Related
was trying out the app "Anim Mod" installed chose animation reboot..... now stuck in a bootloop. volume and power combo dosent work please please help!!
What?you mean you can't enter software upgrade mode?
nope i cant.... tried the known key combinations cant even get it to go into recovery or s/w update mode
tried pulling out the battery sim card and micro SD and then hold volume up and plug in the usb cable?
got it sorted.... the ONLY key combo that worked to get into recovery for me was Huexx method
-------------------------------------------------
WHAT TO DO IF GOT A BOOTLOOP
1.- Remove battery *edit** I didnt remove battery, I plugged out the usb instead**
2.- Power on your phone again, and once the 4 leds start flashing, repeatedly press a physical key (g-button or volume rocker) until your phone reboots and ir access to CWM
3.- Wipe Cache and Dalvik Cache, then reflash the ROM again
4.- Reboot and wait
http://forum.xda-developers.com/showthread.php?t=1454274
--------------------------------------------------
!!NOTICE!!
Stay clear of the app "Anim Mod" it bootloops your phone!!! (for Zues rom at least...... true story bro.... =P)
Troubleshooting required..!!!
Hey guyz I need some help in getting down to download mode. I have a out of the box Captivate. I flashed and installed the latest version of Cyanogen mod 9 and was facing a problem in connecting to my laptop as it was not detecting and then downgraded to previous version to check.
Got stuck in boot and restarts repeatedly and the 3 button mode is not working. Could you help me get into Download or Recovery mode ....?
Sorry dude but people from thecaptivate forum could help you best
Sent from my LG-P970 using Tapatalk
Zaihanzainal said:
got it sorted.... the ONLY key combo that worked to get into recovery for me was Huexx method
-------------------------------------------------
WHAT TO DO IF GOT A BOOTLOOP
1.- Remove battery *edit** I didnt remove battery, I plugged out the usb instead**
2.- Power on your phone again, and once the 4 leds start flashing, repeatedly press a physical key (g-button or volume rocker) until your phone reboots and ir access to CWM
3.- Wipe Cache and Dalvik Cache, then reflash the ROM again
4.- Reboot and wait
http://forum.xda-developers.com/showthread.php?t=1454274
--------------------------------------------------
!!NOTICE!!
Stay clear of the app "Anim Mod" it bootloops your phone!!! (for Zues rom at least...... true story bro.... =P)
Click to expand...
Click to collapse
And if it doesn't work, you can connect your phone to your computer, start adb shell and type in 'reboot recovery'. Your phone will enter cwm and you can restore a backup, reflash a rom..
I use this method if I get a bootloop. (I'm developing a rom.) I think it's very helpful, because you don't must use smartflashtool.
cakebomb.
in some situation adb cannot connect the phone and you have to use the smartflash tool
Anim Mod bootloop
I have the same problem here! I got bootloop after using anim mod. I'm able to go to stock recovery. I had backup my file then did factory reset but problem still not solved. I had backup my framework-res.apk file but it's not on a flashable zip format.
i've tried using apk multi tool on trying to do and adb push but it's not working
what can I do next?
connect your phone to pc in s/w upgrade mode->pull out your battery, hold + and plug in the usb in phone..and after that, use smart flash tool to flash firmware(v20) with CWM included..and after firmware flash your phone will enter in CWM recovery, now from CWM you need to flash supersu from sd card..after flashing firmware and superuser, DO a data,cache,davlik cache wipe !..and just after this you can exit from CWM(reboot)
Here's a link to all tools that you need to repair your phone. You need to use smartflash tool, a V20 firmware with cwm( you can download it from here), and put the Superuser.zip to your sd card..and install USB driver if you haven't installed it yet
I use this method every time when my phone is stuck on bootloop or if I've flashed a ROM that doesn't have root..or other situations.. This method brings you to a rooted gingerbread with CWM(this is all what you need, because from here you can do what you want..for example flashing which ROM you like )
!!! You can use this method anytime...doesn't matter which ROM you have or if your phone is rooted or not. After using this method your phone will be fully rooted, will have CWM recovery and android 2.3 gingerbread !!!
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
Can it be done? How to do it?
through Odin. make sure it's for the i9305
The most recent CWM ported is in this thread, which also contains a link to Odin. Make sure Kies isn't running and that you have the right USB drivers, open Odin, put your phone in download mode (turn it off, then hold volume down + home while you turn it on again), connect your phone to your PC, and flash the .tar.md5 file as PDA.
1. First, download Odin from this link
Make sure you have the drivers for your phone installed. *If not download KIES from the Samsung site and install*
2. Plug your phone into the computer and start Odin.
3. Shutdown your phone and boot it in to download-mode by pressing Vol. down + home + power
4. Press the PDA-button in Odin and select your CWM-recovery file.
5. Make sure that Auto Reboot and F. Reset Time checkboxes are selected.
6. When flashing is done you will se a message "PASS" and your device should restart automatically.
Congratiulations, you now have CWM flashed on your phone
Here's a link to a CWM recovery flashable file if you not have one alreddy. LINK
Creds for the CWM-recovery file upload goes to codeworkx
I have flashed the cwm file through odin. It passed but when I go into recovery it is still the stock recovery and not cwm. Why?
I've gotten the same problem. So.. i flashed the recovery, but whej the phone restarted i shut it down without booting.(i removed the battery when the s3 lte screen showed up). Then i entered recovery and it worked. (S3 lte reflashes stock recovery and other stock things on stock kernel when booting). If you want permanent cwm recovery, flash a custom kernel! I hope this will help you!
Sent from my GT-I9305 using XDA Premium HD app
I used this one http://forum.xda-developers.com/showthread.php?t=2140681
Seems to work fine for me
Sean.
I made a mistake and had Xposed 2.5 installed and I didn't disable resources and now my phone is in a bootloop. Since I got a phone a few days ago I was too lazy to install custom recovery and stock recovery won't seem to load. All I want is to hard reset my phone to get out of the loop. I did get into the stock recovery once, but I thought wiping cache would solve the problem somehow [dumb] and it got stuck on wiping cache so I turned off the phone, and since then I can't open recovery. I also didn't insert SD card before. Is there anything I can do?
Edit: I managed to open recovery and do factory reset, but phone is still stuck in bootloop. Please somebody help, I'm desperate.
sarcastical said:
I made a mistake and had Xposed 2.5 installed and I didn't disable resources and now my phone is in a bootloop. Since I got a phone a few days ago I was too lazy to install custom recovery and stock recovery won't seem to load. All I want is to hard reset my phone to get out of the loop. I did get into the stock recovery once, but I thought wiping cache would solve the problem somehow [dumb] and it got stuck on wiping cache so I turned off the phone, and since then I can't open recovery. I also didn't insert SD card before. Is there anything I can do?
Edit: I managed to open recovery and do factory reset, but phone is still stuck in bootloop. Please somebody help, I'm desperate.
Click to expand...
Click to collapse
Have you solved?
@sarcastical
Maybe a 'Force Update' with full Wipe helps?
* Download org. Firmware (B121 or B126) http://www.huaweiblog.de/downloads/ascend-p7-downloads/
* Connect your P7 with Computer (MTP-Mode)
* Copy extracted folder 'dload' from Firmware with file 'UPDATE.APP' to the top of your internal device memory
* Poweroff device and then press POWER + VOL. (both!)
* Device will detect update and starts
best regards
TT
@sarcastical
I had the same problem.
You need :
Huawei-ADB-FastBootdrivers
Stock Recovery
Fastboot tools
Then proceed step by step :
Put your phone in download mode (switch off the phone, then plug it with USB cable on your computer and press Power & Vol -)
When prompted, install Huawei-ADB-FastBootdrivers
Flash stock recovery : fastboot.exe flash recovery recovery.img
Try to access the recovery (Power & Vol+ & Vol-), or boot you phone and try a local update (with update.app in the dload folder on your SDcard); It may take a long time.
If you need the softs, I can put them on a cloud drive.
Thank you for your help, everyone. I actually solved it different way. I found an old SD card and I downloaded B126 and put it on that card in dload folder, then I installed B126 and even tho I lost everything, at least phone worked. I wish I knew some of these methods before, though. *sigh*
dadoohan said:
@sarcastical
I had the same problem.
You need :
Huawei-ADB-FastBootdrivers
Stock Recovery
Fastboot tools
Then proceed step by step :
Put your phone in download mode (switch off the phone, then plug it with USB cable on your computer and press Power & Vol -)
When prompted, install Huawei-ADB-FastBootdrivers
Flash stock recovery : fastboot.exe flash recovery recovery.img
Try to access the recovery (Power & Vol+ & Vol-), or boot you phone and try a local update (with update.app in the dload folder on your SDcard); It may take a long time.
If you need the softs, I can put them on a cloud drive.
Click to expand...
Click to collapse
Hi friend,
Can you give me those three things because I had the same
I want the bootdriver, flashboot and the recovery img please
Thanks alot
Ali
Stock Recovery of Huawei p7 b126
dadoohan said:
@sarcastical
I had the same problem.
You need :
Huawei-ADB-FastBootdrivers
Stock Recovery
Fastboot tools
Then proceed step by step :
Put your phone in download mode (switch off the phone, then plug it with USB cable on your computer and press Power & Vol -)
When prompted, install Huawei-ADB-FastBootdrivers
Flash stock recovery : fastboot.exe flash recovery recovery.img
Try to access the recovery (Power & Vol+ & Vol-), or boot you phone and try a local update (with update.app in the dload folder on your SDcard); It may take a long time.
If you need the softs, I can put them on a cloud drive.
Click to expand...
Click to collapse
Yes I have TWRP Installed so going back to stock firmware doesn't work, i need the Stock recover not the TWRP recovery do you have a link where i can download for P7-L10 B126
Aliixx said:
Yes I have TWRP Installed so going back to stock firmware doesn't work, i need the Stock recover not the TWRP recovery do you have a link where i can download for P7-L10 B126
Click to expand...
Click to collapse
Hi
I'm sorry but i've sold my P7 a long time ago, so I don't have those files anymore....
I hope you will find them.
Regards
without boot loader unlock you cannot flash custom recovery
Here's what I did. I enabled dev options and aktivated OEM unlocking. Then I rebooted into download mode and flashed TWRP via:
Code:
sudo heimdall flash --RECOVERY twrp-3.2.3-0-greatlte.img --no-reboot
I directly booted into TWRP and got some errormessages that told me that /data and other locations could not be mounted. So I formatted my device. After reboot I am now stuck with the "Samsung Galaxy Note8" boot logo. I can't turn off the device anymore. Only thing that will do anything is the buttons combination that usually brings me into download mode but it just will throw me back to the boot logo. If I restart the device by Power + Bixby Button + Vol down and then real fast do Power + Bixby Button + Vol I can get into TWRP. What I've noticed is that under "Mount" only "Data" and "Cache" are selected.
The only thing I really want is root with TWRP and a stock rom :crying:
Maybe you could mount phone to a pc from twrp then copy rom zip and flash from twrp ??
Solution
go to the link follow the instruction carefully.:good::good:
http://forum.xda-developers.com/galaxy-note-8/how-to/official-stock-firmware-update-odin-t3677072
hijas2000 said:
go to the link follow the instruction carefully.:good::good:
http://forum.xda-developers.com/galaxy-note-8/how-to/official-stock-firmware-update-odin-t3677072
Click to expand...
Click to collapse
No WIndows. No Odin.
But the solution was a different one. I've simply rebooted in to TWRP somehow wiped all I could and then flashed it all via Heimdall directly trough a three parted firmware.