Please Help! - LG Optimus 4X HD

Try to root my LG Optimus 4X HD and the cmd window say:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: more than one device and emulator
Well.. Thats scared me. Now, my phone is soooo slow, I could uninstall the System Backup Test, but, my phone still very VERY slow.
Please, help me :crying:

TomCarter21 said:
Try to root my LG Optimus 4X HD and the cmd window say:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: more than one device and emulator
Well.. Thats scared me. Now, my phone is soooo slow, I could uninstall the System Backup Test, but, my phone still very VERY slow.
Please, help me :crying:
Click to expand...
Click to collapse
Do the "factory reset". Erasing all data of course...

To try factory reset from recovery menu
1. turn off the phone
2. press vol down + power
3. waiting vibrate 2 times and release button
4. choose wipe data/factory reset
after that re-root again
don't forget setting debugging mode
before root.
Sent from my LG-P880 using xda app-developers app

First step would be to disconnect any other Android device.
Second one, put the phone to Airplane mode, you can do with some patience even with the SystemBackup.apk installed. Switch USB mode to "charging only".
If that doesn't help, you can still do a reset.

Do you have the Android SDK installed and are you running the root.bat as an Administrator?

XperiaPlayer said:
Do you have the Android SDK installed and are you running the root.bat as an Administrator?
Click to expand...
Click to collapse
Sorry @XperiaPlayer but, I don't have the Android SDK installed, and my root goes perfect...
You're sure that matters?
Regards

Shift + right click the folder where the root.bat is located and type adb devices (or adb.exe devices) and paste the output here.

Related

[Q] HELP! Stuck at * daemon started successfully * (zergRush root method)

Hi everyone,
I am using a white Galaxy Note w/ GB 2.3.6 (KK2 kernel).
I've read in a different forum that users are able to use the exploit for KK1 works as well for KK2/KK3/KK4.
I downloaded zergRush KK1 (root + CWM), and ran the file: not-rooted-yet.bat
A CMD window pops up and the process halts after it says: * daemon started successfully *.
I have the ADB drivers installed, and both "USB debugging" and "Unknown sources" ticked.
I ran the BAT file whilst the phone was in Charge mode only.
I don't know why the rooting process + installation of CWM keeps on failing.
Please help!!
Thanks.
EDIT:
This is how CMD looks like:
CONFIRM ALL THE ABOVE THEN
Press any key to continue...
--- STARTING ---
--- WAITING FOR DEVICE ---
* daemon not running. starting it now *
* daemon started successfully *
(the process completely halts here)
I rooted my device using ODIN
entropy96 said:
I rooted my device using ODIN
Click to expand...
Click to collapse
If you rooted with a kernel you probably initiated the binary flash counter which could give you trouble regarding warranty issues
---------- Post added at 07:24 AM ---------- Previous post was at 07:17 AM ----------
entropy96 said:
Hi everyone,
I am using a white Galaxy Note w/ GB 2.3.6 (KK2 kernel).
I've read in a different forum that users are able to use the exploit for KK1 works as well for KK2/KK3/KK4.
I downloaded zergRush KK1 (root + CWM), and ran the file: not-rooted-yet.bat
A CMD window pops up and the process halts after it says: * daemon started successfully *.
I have the ADB drivers installed, and both "USB debugging" and "Unknown sources" ticked.
I ran the BAT file whilst the phone was in Charge mode only.
I don't know why the rooting process + installation of CWM keeps on failing.
Please help!!
Thanks.
EDIT:
This is how CMD looks like:
CONFIRM ALL THE ABOVE THEN
Press any key to continue...
--- STARTING ---
--- WAITING FOR DEVICE ---
* daemon not running. starting it now *
* daemon started successfully *
(the process completely halts here)
Click to expand...
Click to collapse
I think KK2 is not supported, at least not by CF Root for cwm. You can root however with DoomLORD http://forum.xda-developers.com/showthread.php?t=1329360. You`ll have root and busybox but no cwm. Download rom manager from market and flash recovery (cwm) with that. Good luck If you have connection problems try another usb port.

I Can't root my se xperia x8

I m not pro or something and i know that it this thread may be a thrash but please guys help me root my phone i have tried to root it with the superoneclick but it does fail at rageagainstthecage and i mean it stucks there i have done the usb debbuging and also i havent mounted the memory card / sd card.
I have also tried one other program DooMLoRD v4 and it also fails because all the time it tries something and it says failed failed failed ....
Could anyone help me im a newbie so i need as much help as it would be possible.
Thanks for reading.
its firmware is 2.1-update1
model number e15i
TraCegr said:
I m not pro or something and i know that it this thread may be a thrash but please guys help me root my phone i have tried to root it with the superoneclick but it does fail at rageagainstthecage and i mean it stucks there i have done the usb debbuging and also i havent mounted the memory card / sd card.
I have also tried one other program DooMLoRD v4 and it also fails because all the time it tries something and it says failed failed failed ....
Could anyone help me im a newbie so i need as much help as it would be possible.
Thanks for reading.
its firmware is 2.1-update1
model number e15i
Click to expand...
Click to collapse
install all drivers that need for x8 here and here
1. use flash tool - click PADLOCK icon
or
2. use x8toolbox
i have pc company i believe that covers it as i have read
use superoneclick
the problem is that i used superoneclick and it stucks at a point where it says rageagainstthecage
BlackRabbit1703
how do i install
X8_drivers??
turn on usb debugging then use superoneclick, try newer version...if u'r using newer then use 2.1.1..it worked for me.....have u installed gordon't gate drivers?
if superoneclick 2.1.1 not working then install gordon gate drivers then use flashtool for root
bandarigoda123 said:
turn on usb debugging then use superoneclick, try newer version...if u'r using newer then use 2.1.1..it worked for me.....have u installed gordon't gate drivers?
if superoneclick 2.1.1 not working then install gordon gate drivers then use flashtool for root
Click to expand...
Click to collapse
yes and also i have 2.3 superoneclick i just stuck rageagainstthecage for some reason
Waiting for device...
OK
Running rageagainstthecage...
OK
***IF IT KEEPS LOOPING, TRY DISABLING USB DEBUGGING NOW***
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Running rageagainstthecage...
i have installed the drivers but i dont know why
try with x8toolbox
stamatis16 said:
try with x8toolbox
Click to expand...
Click to collapse
i dont know how to use it correctly i select e10 then close my phone press back button then connect it to pc again
just use superoneclick 2.1.1
try it now
TraCegr said:
i dont know how to use it correctly i select e10 then close my phone press back button then connect it to pc again
Click to expand...
Click to collapse
no need for flash mode with x8toolbox, you just connect it without doing anything, with usb debuging on
stamatis16 said:
no need for flash mode with x8toolbox, you just connect it without doing anything, with usb debuging on
Click to expand...
Click to collapse
i did it with usb debugging and it shows me an error i chose 1 and then 1 and after this
processing command...
waiting for device...
running psneuter exploit on device...
unable to chmod /data/local/tmp/psneuter: no such file or directory
device not exploited!!!
this error comes.
and about superoneclick2.1 i cant use that i get an error
SuperOneClick v2.1.1.0
Checking drivers...
Killing ADB Server...
* server not running *
OK 0,05s
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK 4,05s
Waiting for device...
OK 0,03s
2.1.1
Getting manufacturer...
Sony Ericsson
OK 0,02s
Getting model...
E15i
OK 0,02s
Getting version...
-X_d
OK 0,02s
Checking if rooted...
False
OK 0,03s
Installing BusyBox (temporary)... - Step #1
2015 KB/s (1062992 bytes in 0.515s)
OK 0,55s
Installing BusyBox (temporary)... - Step #2
OK 0,16s
Rooting device... - Step #1
cannot stat 'C:\Users\TRACE\Downloads\Compressed\SuperOneClickv2.1.1-ShortFuse\Exploits\psneuter': No such file or directory
OK 0,04s
Rooting device... - Step #2
Unable to chmod /data/local/tmp/psneuter: No such file or directory
OK 0,02s
Rooting device... - Step #3
OK 0,00s
Rooting device... - Step #4
./psneuter: not found
FAILED
somehow i managed to install a program superuser
TraCegr said:
somehow i managed to install a program superuser
Click to expand...
Click to collapse
OK you should be rooted now..
To test quickly, open terminal and type:
su
followed by ENTER
If you are rooted then you'll get a prompt askinmg you to allow root access..
Good luck..
i saw that when it was rooted ehm how can i install the app 2 sd i need it

I can't copy files to my phone???

I just bought Htc one ywsterday and i was unlocking the bootlaader today and root, and i'm trying to flash custom rom, but i can't copy anything to my storage... i did install sdk and the drivers and everything, tried lots of things, tried with adb push but it's not working, and now i'm pissing off... don't know what's the problem/.....???
p.s when i type
adb devices it says:
*daemon not running*. starting it now on port 5037 *
*daemon started succesfuly*
List of devices attached
HT35***** device
P.s.s I tried to adb sideload a rom and i get :
*daemon not running*. starting it now on port 5037 *
*daemon started succesfuly*
error: closed
Please help...
So when you plug your HTC device into the computer...go to start-computer and you dont see htc one as a media device? It should also pop up with options to open files in your device when you first plug it in
No no, the device pops out but the problem is the copyng starts and then it stucks... even for files that are 1mb
EDIT: Never mind.
sauprankul said:
EDIT: Never mind.
Click to expand...
Click to collapse
?
Sent using my HTC One from that FBI van parked down the street.
Unplug the USB and replug. Make sure the screen is unlocked. Sometimes happens.
Sent from my HTC One using xda app-developers app
also do not use a USB 3.0 port on your computer

[Q] No OS Installed, Can't access phone on PC

I accidentally deleted my data and it says "No OS installed". When I plug in the phone to the PC and I check devices it only displays "Android Phone" and I cannot access the phone itself from the PC.
How am I suppose to sideload if I cannot access it in the first place? :[
eXileris said:
I accidentally deleted my data and it says "No OS installed". When I plug in the phone to the PC and I check devices it only displays "Android Phone" and I cannot access the phone itself from the PC.
How am I suppose to sideload if I cannot access it in the first place? :[
Click to expand...
Click to collapse
From recovery. Look for adb push or adb sideload commands
SaHiLzZ said:
From recovery. Look for adb push or adb sideload commands
Click to expand...
Click to collapse
I see ADB Sideload in TWRP.
eXileris said:
I see ADB Sideload in TWRP.
Click to expand...
Click to collapse
this is from the AT&T forum, but the procedure is the same:
http://forum.xda-developers.com/showthread.php?t=2318497
you need adb 1.0.31 to use sideload
you can check your adb version with this command:
Code:
adb version
alray said:
this is from the AT&T forum, but the procedure is the same:
http://forum.xda-developers.com/showthread.php?t=2318497
you need adb 1.0.31 to use sideload
you can check your adb version with this command:
Code:
adb version
Click to expand...
Click to collapse
Yeah I have that exact version. However, I just tried to sideload the zip and it gave me an
Code:
* daemon not running. starting it now on port 5037
* daemon started successfully *
error: device not found
What do I do from here?
2137
eXileris said:
Yeah I have that exact version. However, I just tried to sideload the zip and it gave me an
Code:
* daemon not running. starting it now on port 5037
* daemon started successfully *
error: device not found
What do I do from here?
Click to expand...
Click to collapse
Update: Fixed it. Turns out I did not have the HTC drivers installed on my PC. Thank you everyone that replied. :laugh::highfive:

Cant install the recovery plz help

I've returned my phone to factory setting n i use the towelroot succesfully. I tried 3 diffrent superuser app. But when i open cmd box and press 1, it just writing daemon not running. starting it now port 5037 * daemon started successfully. There is no change on my phone ( do you allow this or etc)
i checked usb debbugging.
I think the problem is on superuser app.
On superuser of clockworkmod, i try to install but the phone is restarting. On superuser of chainsDD, there is no change.
Plz help me guys

Categories

Resources