my galaxy note is on ics right now rooted.. i wanna flash to paranoid cm10 what should i do first..
Assuming you already have a rcovery instlled Flash hydracore kernel
Rwboot recovery
Full wipe factory reset,wipe dalvick cache ,cache nd format system
Flash paranoid rom
Flash gapps
Reboot
Done
Pressing thanks requires just few seconds and a heart n mind thats satisfied!
Disregard
Sent from my GT-N7000 using Tapatalk 2
Related
I have to post here because I can't post in the direct thread.
http://forum.xda-developers.com/showthread.php?t=1510940
How do I actually install this? I've flashed ROMs before and I assume I can flash this one through CWM but it doesn't say what base OS you need to have running on the phone in order to flash it.
What rom are you currently running? If you are running one of the ics asop roms then I think you are good to go
Sent from my GT-I9000 using xda premium
Hi Guys
DarkKnights Author Recommend
Installation:
1. DOWNLOAD ZIP
2. WIPE DATA/FACTORY RESET.
3. WIPE CACHE PARTITION.
4. FLASH AND THEN REBOOT.
Click to expand...
Click to collapse
I Suggest if you come from Stock ROM
Flash a Kernel with CWM (CF-ROOT kernel with Addon, my Favorite) with Odin/Heimdall
Boot into CWM Recovery Mode
WIPE DATA/FACTORY RESET
WIPE CACHE PARTITION
Flash latest CyanogenMod (be sure, you do it with full version)
Boot into CWM Recovery Mode
WIPE DATA/FACTORY RESET
WIPE CACHE PARTITION
Flash the DarkKnight ICS
Have Fun !
I know it isn't the Best Way, but it surely will do if you like that !
Don't forget to thanks [if it useful was for you]
_______________
I was more asking which ROM to come from.
I ended up flashing 2.3.5 JVT and then this over the top of Semaphore kernel.
i wanted to do data factory reset
im on paranoid android v0.5 having some probs with it
so i decided to hav a fresh install of th same rom with all 3 wipes
so vich version out of the 4 abyss kernel shd i use?
1)AbyssNote kernel 4.2 Final CW Touch Custom Logo
2)AbyssNote kernel 4.2 Final CW Touch Original Logo:
3)AbyssNote kernel 4.2 Final RedPill Touch Custom Logo:
4)AbyssNote kernel 4.2 Final RedPill Touch Original Logo:
People tend to use RedPill so you see the difference when you've rebooted into recovery therefore you know you're on a safe kernel....
I tended to use: AbyssNotekernel42CWTouchOriginalLogo
Although now for uber safety (And paranoia) I tend to downgrade to GB and do all my wipes and FR's in there, Then approach things afresh...
No need to use abyss. Since cm9 is a safe kernel.
Sent from my GT - N7000 using XDA Premium
1) install paranoid v0.5
2) install gapps
3) wipe data factory reset
4) wipe cache partion
3) wipe dalvik cache
is this th way i can go? js asking to b sure
I too use: AbyssNotekernel42CWTouchOriginalLogo, have not run into any issues.
I have run with issues . In the abyss recovery ext SD card doesn't show up. I was struck on the recovery luckily I had nandroid backup so I restored it . I don't know what would have happened if there was no ROM to flash and I finished all three wipes . It was awkward. Luckily I came out of the situation. But cm9 and speed mod is safe to make three wipes. But are they safe to flash cm10 ?
Sent from my GT-N7000 using xda app-developers app
I hear that SpeedMod is a safe kernel to wipe on - Although as mentioned earlier I have not tried, despite running SpeedMod
chillteddy said:
1) install paranoid v0.5
2) install gapps
3) wipe data factory reset
4) wipe cache partion
3) wipe dalvik cache
is this th way i can go? js asking to b sure
Click to expand...
Click to collapse
Reboot into recovery
Full wipe(be sure you are on cm9 before you wipe)
Flash rom paranoid android
Flash gapps
Now again full wipe
Reboot system
Done.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Vishal_Pratap singh said:
I have run with issues . In the abyss recovery ext SD card doesn't show up. I was struck on the recovery luckily I had nandroid backup so I restored it . I don't know what would have happened if there was no ROM to flash and I finished all three wipes . It was awkward. Luckily I came out of the situation. But cm9 and speed mod is safe to make three wipes. But are they safe to flash cm10 ?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes CM9 is safe to install CM10 but not Speed Mod
Question
Does have a difference between come back to 2.3.5 and then install rom or just make the wipes (data/cache/dalvik) in a safe kernel and install rom too?
Tks!
I always get super laggy UI when I instal every JB custom room after they update to 4.1.2/4.2, but before update everythink is clear
Is there any solution or mybe special step ??
I usually use this step (its work when JB still on kernel v2 /4.1.1 )
Wipe data/factory reset
Wipe cache
Wipe dalvic cache
Wipe batery stats
Wipe system
Instal ROM +gapps
wipe data/factory reset
Boot
Or maybe I got wrong the arrangement??
Sorry my bad english
Sent from my GT-P7300 using xda premium
No notification panel, no task manager, no buttons in camera after flashing stock German jb rom on rooted stock ics(Indian rom) using pc Odin...what could have gone wrong?
Flash philz kernel.
Reboot into recovery and wipe data cache and dalvik.
You should be good.
If not wipe data cache dalvik system preload and .androidsecure in Philz and then ref lash ROM in PC Odin.
If you continue to have problems after that then post back.
Please hit thanks If this helped.
Sent from my Samsung Galaxy SIV using Tapatalk 3
Is it necessary to flash philz kernel or should I just clear dalvik and data cache...then reflash ??
kanishkgaur said:
Is it necessary to flash philz kernel or should I just clear dalvik and data cache...then reflash ??
Click to expand...
Click to collapse
No, try first with cleaning cache and dalvik cache. Reboot and check again.
If cache cleaning doesn't help then you might try reflashing it.
You should flash philz before any wipes.
You said yoiure on rooted stock...as in stock kernel too, no?
Sent from my Nexus 7 using Tapatalk 2
why not do a clean install of JB by formatting system and data partitions
had installed latest nighlty...using cwm recovery now i want to install another rom based on jb 4.1.1..should i simply flash it using recovery or do i need to do anything else
Installed "Stock deodexed and rooted XXLSZ " after wiping dalvik cache
phone in boot loop now...wiped the dalvik cache and installed jb 4.1.1 rom..came from 4.2.2 ...anybody??? stuck at the samsung logo screen
first this should be on Q&A...exactly you need to make full wipe if want to change rom that have different base...the key is Full wipe..
Have a look here and you can know all the secrets of life that has not yet been told to you by your parents.. Lol http://forum.xda-developers.com/announcement.php?a=81
Sent from my GT-N7000 using Tapatalk 2