Related
i wanted to do data factory reset
im on paranoid android v0.5 having some probs with it
so i decided to hav a fresh install of th same rom with all 3 wipes
so vich version out of the 4 abyss kernel shd i use?
1)AbyssNote kernel 4.2 Final CW Touch Custom Logo
2)AbyssNote kernel 4.2 Final CW Touch Original Logo:
3)AbyssNote kernel 4.2 Final RedPill Touch Custom Logo:
4)AbyssNote kernel 4.2 Final RedPill Touch Original Logo:
People tend to use RedPill so you see the difference when you've rebooted into recovery therefore you know you're on a safe kernel....
I tended to use: AbyssNotekernel42CWTouchOriginalLogo
Although now for uber safety (And paranoia) I tend to downgrade to GB and do all my wipes and FR's in there, Then approach things afresh...
No need to use abyss. Since cm9 is a safe kernel.
Sent from my GT - N7000 using XDA Premium
1) install paranoid v0.5
2) install gapps
3) wipe data factory reset
4) wipe cache partion
3) wipe dalvik cache
is this th way i can go? js asking to b sure
I too use: AbyssNotekernel42CWTouchOriginalLogo, have not run into any issues.
I have run with issues . In the abyss recovery ext SD card doesn't show up. I was struck on the recovery luckily I had nandroid backup so I restored it . I don't know what would have happened if there was no ROM to flash and I finished all three wipes . It was awkward. Luckily I came out of the situation. But cm9 and speed mod is safe to make three wipes. But are they safe to flash cm10 ?
Sent from my GT-N7000 using xda app-developers app
I hear that SpeedMod is a safe kernel to wipe on - Although as mentioned earlier I have not tried, despite running SpeedMod
chillteddy said:
1) install paranoid v0.5
2) install gapps
3) wipe data factory reset
4) wipe cache partion
3) wipe dalvik cache
is this th way i can go? js asking to b sure
Click to expand...
Click to collapse
Reboot into recovery
Full wipe(be sure you are on cm9 before you wipe)
Flash rom paranoid android
Flash gapps
Now again full wipe
Reboot system
Done.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Vishal_Pratap singh said:
I have run with issues . In the abyss recovery ext SD card doesn't show up. I was struck on the recovery luckily I had nandroid backup so I restored it . I don't know what would have happened if there was no ROM to flash and I finished all three wipes . It was awkward. Luckily I came out of the situation. But cm9 and speed mod is safe to make three wipes. But are they safe to flash cm10 ?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes CM9 is safe to install CM10 but not Speed Mod
Question
Does have a difference between come back to 2.3.5 and then install rom or just make the wipes (data/cache/dalvik) in a safe kernel and install rom too?
Tks!
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
What process are you using to flash paranoid rom?
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
Can you provide more info, what kernel and rom are you using to flash PA?
Hi
I tried it from ics (crash v8.1, liquid black 3.2, criskelorom v9, fusion Tom 2.5, rocket Tom v10) ........ no result
I tried it from the gb 2.3.6 (stock).... no result
I used clockworkmod recovery... abyss kernel
Everytime the same problem hung on the boot logo... and no access to clockworkmod recovery....
Sent from my GT-N7000 using xda app-developers app
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Do I need to install abyss kernel to format and wipe or the native 5.0.2.7 recovery is enough.. and is it safe to wipe cache,format factory reset in stock 2.3.6 by cwm recovery 5.0.2.7
Sent from my GT-N7000 using xda app-developers app
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Ok let me try
I will let u know about the progress
Sent from my GT-N7000 using xda app-developers app
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
done .... flashed stock 2.3.6 gb rom... flashed cwm recovery and did the same as u told me to do... but again struck on the boot screen logo...
i cant access recovery but can still access download mode....
even i cant understand where is the problem why paranoid is not working on my note.....confused
can i try installing paranoid without installing gapps..... will that work or not?
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
rraaka said:
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Click to expand...
Click to collapse
i used CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar to root and install recovery...
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
rraaka said:
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
Click to expand...
Click to collapse
190712-102621-STAXXTANIUM-v17.zip
paranoid_note_v05.zip
paranoid_note_v04a.zip
nothing is working
and when i try to install
crashrom
criskelrom
liquidblack
etc
they work fine...
its only when i try to install paranoid i get this problem.... cant understand y
there is one difference is paranoid and other roms is size... paranoid is abt 130mb but rest of the custom roms are 700 to 800 mb
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
rraaka said:
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
Click to expand...
Click to collapse
yes working absolutely perfect... and recovery is also acccessable...
stock and all other custom roms are working
only problem when i try to install any damn version of paranoid
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
if this doesnt work ill tell you a method using CM9 safe kernel tar ( give me some time)
rraaka said:
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
Click to expand...
Click to collapse
i have already tried this procedure so many times, but everytime after finishing installation, rebooting the phone and damn its struck again at boot logo.....
i think its the kernel and recovery which gets erased during the installation of paranoid thats y it gets struck at boot logo
Maybe you have a corrupted download. Check md5 sum to verify.
sahilarora2003 said:
Maybe you have a corrupted download. Check md5 sum to verify.
Click to expand...
Click to collapse
i verified all the zip files (roms) i downloaded..... everything is just fine
chochweet said:
i verified all the zip files (roms) i downloaded..... everything is just fine
Click to expand...
Click to collapse
Do these steps and let me know if its still there.
As I know you are on Rooted GB rom right now.
So Reboot into recovery
Full Wipe
Reboot Recovery
Go to Mounts and storage
Mount system
mount cache
mount data
Format data
Format system
Format Cache
Reboot Recovery
Now
Flash Paranoid Rom
Flash Gapps
Now Again Full Wipe
Reboot System
C if it works
Cheers
Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.
Nazeiro said:
Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.
Click to expand...
Click to collapse
Since you are on Hydracore it is safe to wipe. But just to be sure just take a nandroid backup, by Booting in to recovery
Selecet Backup & restore--> Select Backup & do a nandroid backup Then just follow the installation procedure below
Keep both the ROM & Gapps file on your SD card
Wipe data / factory reset
Wipe Cache Partition
Go to Advanced - > Wipe Dalvik Cache
Select Install Zip from SD Card--> Select either internal card or SD card (external sd ) based on where you kept the file-->Install the zip file of the ROM
Same way Select & install the Gapps package
Go Back & wipe Cache Partion & Dalvik Cache once again
Reboot & you are Paranoid...:good:
the best advice I can just offer you is to go to the respective Paranoid Android ROM thread and post this question there. There many people there as well willing to help you. Or you can wait for someone who has PA already on their device and perhaps they can give you some nice info on how to go about installing PA on your phone.
sorry, I can't do much help on you as I'm not using JB for now.
You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.
Help i am stuck on the PA logo
singh.harvinder said:
You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.
Click to expand...
Click to collapse
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?
You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2
Do i need to...
Utacka said:
You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2
Click to expand...
Click to collapse
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?
Nazeiro said:
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?
Click to expand...
Click to collapse
Yes you need to factory reset when coming from another rom that is not aosp based, i.e stock gb/ics.
Skickat från min GT-N7000 via Tapatalk 2
Nazeiro said:
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?
Click to expand...
Click to collapse
I think you need to read instructions to the point before carrying them out. I had posted you the method for installation of PA which so far as I know is the correct one coming from any non AOSP based ROM. Pls. do follow the instructions. In case you are in doubt just ask for a reconfirmation.
Also any ROM developer will have the instructions posted in the OP thread, which you should definitely follow.
As others have told you, do a full wipe coming from a non AOSP based ROM..
By the Way if your problem is solved just change the OP title to Solved..
In regards to doing a full wipe: When doing the same process a couple of weeks back, coming from a stock ICS rom to PA i read you need to do a full wipe.
google brought me to this page: http://checkrom.com/threads/full-wipe-the-correct-way.432/
do you guys consider wipe/factory reset to be sufficient or is it a good idea to do this manual format of the /system/ /data/ and /cache/ partitions as per the above guide?
I was in a bit of doubt on that one at the time, so i did it anyway to be on the safe side and it all worked fine.
Paranoid android
Hey :laugh:
Someone can tell me what's the difference between the Paranoid rom from Imilka (PARANOIDANDROID 2.1 http://forum.xda-developers.com/showthread.php?t=1797698) and the Paranoid rom from Utacka (PARANOIDANDROID 2.15 http://forum.xda-developers.com/showthread.php?t=1871713)????
To be sure
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer
kokodv said:
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer
Click to expand...
Click to collapse
yea, hydracore is safe, flashing using hydracore is safe
Skickat från min GT-N7000 via Tapatalk 2
my galaxy note is on ics right now rooted.. i wanna flash to paranoid cm10 what should i do first..
Assuming you already have a rcovery instlled Flash hydracore kernel
Rwboot recovery
Full wipe factory reset,wipe dalvick cache ,cache nd format system
Flash paranoid rom
Flash gapps
Reboot
Done
Pressing thanks requires just few seconds and a heart n mind thats satisfied!
Disregard
Sent from my GT-N7000 using Tapatalk 2
I tried following the steps indicated in this thread http://forum.xda-developers.com/showthread.php?t=1424997. I was able to successfully flash the ROM N7000DXLR5---4.0.4/12.07.30-N7000OLBLR2---Download--Philippines (Smart) . I was already on the last part where the phone should reboot and would install some applications but the phone is just stuck on the Samsung logo screen. I waited for almost 2 hours already. I tried taking out the battery and rebooting the phone but its still stuck in the Samsung logo. The Volume down+home+power key is still working as well as the volume up+home+power key. I don't want to take another step because I'm afraid of my phone getting bricked.
I previously had a Jellybean custom ROM installed but don't like it since S-Pen features aren't working.
Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.
You need a factory reset but 4.0.4 is not a safe kernel, that's why you need Philz kernel.
If you want a full stock ROM with kernel (like I need to send for warranty repair),
flash any GB stock rom appropriate for you, (still hang at samsung logo),
factory reset on recovery and update using kies to 4.0.4
nokiamodeln91 said:
Install philz ics kernel from stock recovery and reboot into recovery. You will see cwm. Now do a factory reset. Then reboot.
Click to expand...
Click to collapse
Follow him not one above me
Sent from my GT-N7000 using Tapatalk 2
Stuck at Samsung logo
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??
algorithm101 said:
Stuck at samsung logo
running on siyah kernel v6.5b
tried to install alliance mod rom v8 and ended up at samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too
what do i do now??
I have access to root..
What do i do now??
Click to expand...
Click to collapse
if you are using N7000 then siyah kernel is not meant for this device as yet.
try to philz kernel if you can access recovery and then try to flash alliance rom.
or simply flash stock rom accessing the download mode.