Database Develop

abyss kernel question

i wanted to do data factory reset
im on paranoid android v0.5 having some probs with it
so i decided to hav a fresh install of th same rom with all 3 wipes
so vich version out of the 4 abyss kernel shd i use?
1)AbyssNote kernel 4.2 Final CW Touch Custom Logo
2)AbyssNote kernel 4.2 Final CW Touch Original Logo:
3)AbyssNote kernel 4.2 Final RedPill Touch Custom Logo:
4)AbyssNote kernel 4.2 Final RedPill Touch Original Logo:

People tend to use RedPill so you see the difference when you've rebooted into recovery therefore you know you're on a safe kernel....
I tended to use: AbyssNotekernel42CWTouchOriginalLogo
Although now for uber safety (And paranoia) I tend to downgrade to GB and do all my wipes and FR's in there, Then approach things afresh...

No need to use abyss. Since cm9 is a safe kernel.
Sent from my GT - N7000 using XDA Premium

1) install paranoid v0.5
2) install gapps
3) wipe data factory reset
4) wipe cache partion
3) wipe dalvik cache
is this th way i can go? js asking to b sure

I too use: AbyssNotekernel42CWTouchOriginalLogo, have not run into any issues.

I have run with issues . In the abyss recovery ext SD card doesn't show up. I was struck on the recovery luckily I had nandroid backup so I restored it . I don't know what would have happened if there was no ROM to flash and I finished all three wipes . It was awkward. Luckily I came out of the situation. But cm9 and speed mod is safe to make three wipes. But are they safe to flash cm10 ?
Sent from my GT-N7000 using xda app-developers app

I hear that SpeedMod is a safe kernel to wipe on - Although as mentioned earlier I have not tried, despite running SpeedMod

chillteddy said:
1) install paranoid v0.5
2) install gapps
3) wipe data factory reset
4) wipe cache partion
3) wipe dalvik cache
is this th way i can go? js asking to b sure
Click to expand...
Click to collapse
Reboot into recovery
Full wipe(be sure you are on cm9 before you wipe)
Flash rom paranoid android
Flash gapps
Now again full wipe
Reboot system
Done.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2

Vishal_Pratap singh said:
I have run with issues . In the abyss recovery ext SD card doesn't show up. I was struck on the recovery luckily I had nandroid backup so I restored it . I don't know what would have happened if there was no ROM to flash and I finished all three wipes . It was awkward. Luckily I came out of the situation. But cm9 and speed mod is safe to make three wipes. But are they safe to flash cm10 ?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes CM9 is safe to install CM10 but not Speed Mod

Question
Does have a difference between come back to 2.3.5 and then install rom or just make the wipes (data/cache/dalvik) in a safe kernel and install rom too?
Tks!

Upgrading cm 7.2 to cm9

Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!

ablack01 said:
Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!
Click to expand...
Click to collapse
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..

Best and most reliable way to do this is flashing through stock rom via Odin. Then flashing kernel with CWM Recovery via Odin. And only then flash CM9 via CWM.

thanks for the quick reply guys. will try it out tonight and update this post. hope all goes well.
cheers!

bmwchampz said:
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..
Click to expand...
Click to collapse
and if u want u can try chimera rom from team passion.. it s combination of cm9 and AOKP.. It s stable and fast..

took me less than 10 minutes to flash to cm9 and it's as snappy as i thought it was. now to fix up everything and check if everything's okay.
so far, wifi and network signal are working fine and dandy. might just have a go at that chimera rom.

Not able to install paranoid on my note

hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note

chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
What process are you using to flash paranoid rom?

chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
Can you provide more info, what kernel and rom are you using to flash PA?

Hi
I tried it from ics (crash v8.1, liquid black 3.2, criskelorom v9, fusion Tom 2.5, rocket Tom v10) ........ no result
I tried it from the gb 2.3.6 (stock).... no result
I used clockworkmod recovery... abyss kernel
Everytime the same problem hung on the boot logo... and no access to clockworkmod recovery....
Sent from my GT-N7000 using xda app-developers app

Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note

Att.Fan1982 said:
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Do I need to install abyss kernel to format and wipe or the native 5.0.2.7 recovery is enough.. and is it safe to wipe cache,format factory reset in stock 2.3.6 by cwm recovery 5.0.2.7
Sent from my GT-N7000 using xda app-developers app

It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note

Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Ok let me try
I will let u know about the progress
Sent from my GT-N7000 using xda app-developers app

Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
done .... flashed stock 2.3.6 gb rom... flashed cwm recovery and did the same as u told me to do... but again struck on the boot screen logo...
i cant access recovery but can still access download mode....
even i cant understand where is the problem why paranoid is not working on my note.....confused
can i try installing paranoid without installing gapps..... will that work or not?

when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?

Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
rraaka said:
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Click to expand...
Click to collapse
i used CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar to root and install recovery...

if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....

rraaka said:
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
Click to expand...
Click to collapse
190712-102621-STAXXTANIUM-v17.zip
paranoid_note_v05.zip
paranoid_note_v04a.zip
nothing is working
and when i try to install
crashrom
criskelrom
liquidblack
etc
they work fine...
its only when i try to install paranoid i get this problem.... cant understand y
there is one difference is paranoid and other roms is size... paranoid is abt 130mb but rest of the custom roms are 700 to 800 mb

your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?

rraaka said:
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
Click to expand...
Click to collapse
yes working absolutely perfect... and recovery is also acccessable...
stock and all other custom roms are working
only problem when i try to install any damn version of paranoid

you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
if this doesnt work ill tell you a method using CM9 safe kernel tar ( give me some time)

rraaka said:
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
Click to expand...
Click to collapse
i have already tried this procedure so many times, but everytime after finishing installation, rebooting the phone and damn its struck again at boot logo.....
i think its the kernel and recovery which gets erased during the installation of paranoid thats y it gets struck at boot logo

Maybe you have a corrupted download. Check md5 sum to verify.

sahilarora2003 said:
Maybe you have a corrupted download. Check md5 sum to verify.
Click to expand...
Click to collapse
i verified all the zip files (roms) i downloaded..... everything is just fine

chochweet said:
i verified all the zip files (roms) i downloaded..... everything is just fine
Click to expand...
Click to collapse
Do these steps and let me know if its still there.
As I know you are on Rooted GB rom right now.
So Reboot into recovery
Full Wipe
Reboot Recovery
Go to Mounts and storage
Mount system
mount cache
mount data
Format data
Format system
Format Cache
Reboot Recovery
Now
Flash Paranoid Rom
Flash Gapps
Now Again Full Wipe
Reboot System
C if it works
Cheers

Stock ICS --> JB Leak?

Hi all,
I know similar questions have been asked literally hundred times, but as a complete noob to roms, I want to make sure that I get a full set of instructions and then I won't brick my phone. I want to upgrade my note to this JB Rom by cronosmachine. I'm on stock ICS 4.0.4. Never rooted or did modding to the phone. No kernel change (which I know nothing about), nothing.
I'm not sure how much info you guys will need but here are the basics:
Baseband version: N7000XXLRB
Kernel version: 3.0. 15-1115729
[email protected] #3
SMP PREEMPT Thu Sep 20 00:40:29 KST 2012
Build number: IMM76D.ZSLPN
I know that I have to first root my phone to get CWM? My guess is to follow method 1 on [24sept12]How to Root/Unroot Samsung Galaxy Note + CWM?
And then from there I don't know what to do in order to get the ROM onto my phone.
And is there anything else I need to be aware of?
Appreciate any kind of help.

yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough

nokiamodeln91 said:
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
Click to expand...
Click to collapse
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?

rcheung28 said:
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
Click to expand...
Click to collapse
Yes, bas band refers to the modem, Build Number is rom.
Sent from my GT-N7000 using xda premium

Thanks SpyderTracks.
One more question before I pull the trigger, can all this be done with the "internal" SD card? Or does it have to be an external SD?

stock recovery doesnot allow installation from internal SD. so external is required. but you can use PC odin to install it, but it will leave a yellow triangle and increase the counter. later you can use triangle away app to reset it, Final call is yours.,

So after I installed philz's root and safe kernel, I went into recovery to wipe data cache system, went also wiped dalvik. Then I went to the main menu, chose install zip, tried to select choose zip from sdcard, but it keeps giving me this error: E:Can't mount /sdcard/

Nevermind, I managed to install from internal SD. But I'm not liking the ROM that much, so I plan on flashing CM10 Nightly to try it out.
On the CM10 thread, it says that I shouldn't be on a ROM based on stock. What I want to do is to flash CM9. But in order to do that, I'm not sure if I'm already on a safe kernel (after rooting using dr.ketan's 1a method (Phil's)).

what rom are you on now?

nokiamodeln91 said:
what rom are you on now?
Click to expand...
Click to collapse
I'm on this rom, it's a tw based rom based on the leaked jb ls7?

I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7

nokiamodeln91 said:
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
Click to expand...
Click to collapse
I'm not sure either, I booted into recovery, went into Philz Settings > about, and got CWM base 6.0.1.5, and PhilZ Touch 3.00 (n7000).
And what you're saying is that if I'm on Philz xxls7 kernel, I can go right to flashing CM10, without worrying the "do not flash on stock based ICS fw" (even though I'm on jb)?

Yes.. you are on philz kernel and you can directly install CM10

nokiamodeln91 said:
Yes.. you are on philz kernel and you can directly install CM10
Click to expand...
Click to collapse
Thanks for the information. But I want to know what makes my case an exception from
- Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!
Click to expand...
Click to collapse
.
I'm on a JB rom but it's based on stock, isn't that essentially the same as based on stock ICS?

the warning was when the safe ics kernels were not in effect.

nokiamodeln91 said:
the warning was when the safe ics kernels were not in effect.
Click to expand...
Click to collapse
Thanks for the quick reply!! When I get home, I'll try this out!
So what I need to do is
put the zip files onto my SD,
reboot into recovery,
install the rom,
install google apps,
wipe data,
factory reset,
reboot into cm10
I don't need to wipe system/cache/dalvik??

once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps

nokiamodeln91 said:
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
Click to expand...
Click to collapse
Thanks a lot for guiding me through this, everything worked out perfectly!

great. now enjoy the cm10..:thumbup::thumbup::thumbup:

How come even after I performed format system cache data dalvik, some of the settings are still left on the phone? e.g. previously saved wireless networks, wallpapers... How can I completely start from scratch?

[Q] Few questions about Roms, flashing and Kernels

Hi guys. I just decided to use custom Roms because stock is slow. I checked some Roms and 2 interested me: CM 11 and Zaiben.
1. Could you tell me about differences between them? At the moment I have got orginal Android 4.1.2 V20B. Is it possible to flash Zaiben from V20B, I am asking because in Zaiben's thread there isn't any information about flash from v20b. There is only about flash from v20a. And I can't post in that thread yet.
2. Also what should I do before flash new Rom. Will wipe data/factory reset and wipe cache partition be enough?
3. And could you tell me if I want to flash new Kernel I just use install zip option? And which Kernels do you recommend guys?
Thanks in advance.

speeduser said:
Hi guys. I just decided to use custom Roms because stock is slow. I checked some Roms and 2 interested me: CM 11 and Zaiben.
1. Could you tell me about differences between them? At the moment I have got orginal Android 4.1.2 V20B. Is it possible to flash Zaiben from V20B, I am asking because in Zaiben's thread there isn't any information about flash from v20b. There is only about flash from v20a. And I can't post in that thread yet.
2. Also what should I do before flash new Rom. Will wipe data/factory reset and wipe cache partition be enough?
3. And could you tell me if I want to flash new Kernel I just use install zip option? And which Kernels do you recommend guys?
Thanks in advance.
Click to expand...
Click to collapse
1) Zaiben is a modified stock rom, cm is a completely independent rom based on open source project.
All you need to do is have the most updated recovery and you can simply flash right away.
2) If moving to zaiben you can probably dirty flash and don't need to wipe data since it's basically the same basis
If moving to cm you will most likely need a full wipe (system, data cache and dalvik
3) Yes - you canno't ask that question
Before you do any of the above you must unlock your bootloader to install cwm or twrp recovery!

Thank you for the help And last question: If I change Kernel what do I need to wipe after this?

speeduser said:
If I change Kernel what do I need to wipe after this?
Click to expand...
Click to collapse
Flashing kernel doesn't require wiping anything.
Each kernel has it's advantages and disadvantages. You need to read through their topics and find out which one will be more suitable for your needs.

Then I will try some. Thank you for help