Related
Ok so i decided to root my phone using this method darkys installation-guide-for-first-time-users after doing the first step for root using odin.Now after reboot it gets stuck on the initial screen were it says galaxy s gt i9000 and vibrates after intervals.What im able to do at the moment is go into recovery which seems to be 2e now prior to the root it was 3e and i can also start the phone in download mode.Please help me out or let me know what needs to be done.I really appreciate any feedback.
Thanks!
Wich Version of Darky´s ROM did you tried to flash?
One ask Darky its his rom his instructions you followed .
Two remove Darky rom flash back to stock.
http://forum.xda-developers.com/showthread.php?t=723596
jje
xivv1 said:
Wich Version of Darky´s ROM did you tried to flash?
Click to expand...
Click to collapse
JJEgan said:
One ask Darky its his rom his instructions you followed .
Two remove Darky rom flash back to stock.
http://forum.xda-developers.com/showthread.php?t=723596
jje
Click to expand...
Click to collapse
I have not flashed the rom yet this issue started exactly after rooting which is the first step i suppose.
These are the steps i followed:
For Froyo (2.2 and 2.2.1)
You need to grant yourself superuser access to system files on the phone. You also need Recovery 2e. You do that by installing CF-Root using the Odin flashing software.
1.1 - Pick the CF-Root matching your Firmware Version here
(take the v1.17 Busybox Version).
1.2 - Download Odin for Windows here.
1.3 - Install the needed USB drivers.
1.4 - Connect your phone to the computer and make sure that your phone has been recognized by Windows. You may need to do this several times before all drivers are configured correctly (unplug-plug-wait-unplug-plug until no more "Installing drivers" occurs).
1.5 - Unzip the downloaded file on your desktop.
1.6 - Make sure that your phone is NOT connected to your computer!
1.7 - Run Odin and make sure that that Partition and Clear EFS is not checked.
Just click on the PDA button and select the .tar file from your unzipped CF-Root file.
1.8 - Turn off your phone completely.
Restart it in Download Mode (Keep pressing both Volume Down + Home, press Power until the screen goes on). The phone will show a yellow logo and the word 'Downloading'.
1.9 - Connect your phone via the USB cable.
Odin should now recognize your phone (a COM port lightens up in yellow).
1.10 - Click on the Start button and wait while Odin flashes the CF-Root kernel.
1.11 - Your phone will automatically reboot when the flashing is complete.
The phone got stuck after the reboot and vibrates.Hope this helps for you guys to figure out the issue.
Thanks!
Download this Update.zip : http://www.multiupload.com/6OU2AGRSOD
Get into recovery mode and mount your sdcard. Connect your Phone via usb and open a command line window from your adb directory and enter this command : adb push Update.zip /sdcard Update.zip
Wait some sec and reboot your phone into recovery mode and apply sdcard: Update.zip
Try to root like this and tell me if it worked.
xivv1
Sent from my GT-I9000 using XDA App
First of thanks for the reply and i'll try my best what you told me to do and certainly get back to you!
BTW could you plz tell what is adb directory and how do i go about it?
Ill help you when Im back at home. Got some download links for you at my pc .Ill be at home at 17:00. Cya
Sent from my GT-I9000 using XDA App
rocky6 said:
First of thanks for the reply and i'll try my best what you told me to do and certainly get back to you!
BTW could you plz tell what is adb directory and how do i go about it?
Click to expand...
Click to collapse
I think you should use Odin to flash back to older firmware and start from scratch.
https://www.wuala.com/Samsung Galax...al Firmwares/Europe/October/?key=AfzUZSU4SpKU
Download the JPM firmware, put it into PDA in Odin (make sure re-partition is unchecked) and flash again.
xivv1 said:
Ill help you when Im back at home. Got some download links for you at my pc .Ill be at home at 17:00. Cya
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
splish2010 said:
I think you should use Odin to flash back to older firmware and start from scratch.
Download the JPM firmware, put it into PDA in Odin (make sure re-partition is unchecked) and flash again.
Click to expand...
Click to collapse
Really appreciate all the help i am getting from you guys.Ok so i flashed the firmware that you told me with odin everything went fine the phone started up fine.Now as i sweep the screen i get this messege "Sorry! the process android.process.media has stopped unexpectedly.please try again" below is an option for force when i click on it closes.Below it there is another messege "sorry! the application logsprovider(process com.sec.android.provider.logsprovider)has stopped unexpectedly.please try again" not able force the previous messege pops up.Not able to do anything on the phone.
Heres what i did turned off the phone started in recovery mode did a factory reset,wipe cache and formatted the sdcard and restarted the phone everything went fine no more messeges and i am able to use my phone thanks to u guys.Actually i am in luv with guys for helping me through this great work.I appreciate all the effort thanku once more u made my day!
No problem mate, hf using your phone
Sent from my GT-I9000 using XDA App
Hey guys am new to dis forum and I wanna root my sgs i9000
its an indian version phone n here r d details
PDA - i9000ddjvb
Phone - i9000ddjv7
Csc - i9000ddjvb
Firmware version - 2.3.6
Baseband version - i9000ddjv7
Kernal version - [email protected]#2
Built num - gingerbread.ddjvb
Pls help me n pls provide me step by step instructions as am an begginer n wanna root my handset .. pls help me out guys
Thanks.
afaik there's no rooted kernel for this rom.
you can try that, anyway.
1 - google for "odin" and download it on your pc. or take this http://forum.xda-developers.com/showthread.php?t=1464775
2 - similarly, install samsung kies (so you have samsung drivers)
3 - download semaphore_2.7.4_sc.tar kernel http://forum.xda-developers.com/showthread.php?t=1112908
4 - download original kernel from ramad's thread http://forum.xda-developers.com/showthread.php?t=1102881
4 - turn off your phone, that press power+volume_down+home until you enter download mode (yellow pic on screen)
5 - run odin.exe (as administrator in win7). make sure kies is not running on your pc before running odin.
6 - connect your phone to pc via usb
7 - in odin select as "pda" the semaphore kernel. leave all options as defaults. execute it. this is done in a few seconds. this way you are rooting you phone (aka adding busybox) and installing superuser.apk
8 - unplug usb.
9 - let the phone reboot. then turn it off back again, and get once again in download mode (power+volume_down+home).
10 - run odin.exe (as administrator in win7)
11- connect phone to pc via usb
12 - in odin select ramad's jvb kernel as "pda". execute.
13 - start phone, to be sure reinstall superuser from google play
14 - you're done, now you are rooted with original jvb kernel.
I do not know if this is a robust procedure, but it worked for my italian jw7 rom, hope it is ok for you too.
after gaining root privileges, you can remove semaphore.apk from /system/app with root explorer (download from google play)
Do u think it ll work
lcampori said:
afaik there's no rooted kernel for this rom.
you can try that, anyway.
1 - google for "odin" and download it on your pc. or take this http://forum.xda-developers.com/showthread.php?t=1464775
2 - similarly, install samsung kies (so you have samsung drivers)
3 - download semaphore_2.7.4_sc.tar kernel http://forum.xda-developers.com/showthread.php?t=1112908
4 - download original kernel from ramad's thread http://forum.xda-developers.com/showthread.php?t=1102881
4 - turn off your phone, that press power+volume_down+home until you enter download mode (yellow pic on screen)
5 - run odin.exe (as administrator in win7). make sure kies is not running on your pc before running odin.
6 - connect your phone to pc via usb
7 - in odin select as "pda" the semaphore kernel. leave all options as defaults. execute it. this is done in a few seconds. this way you are rooting you phone (aka adding busybox) and installing superuser.apk
8 - unplug usb.
9 - let the phone reboot. then turn it off back again, and get once again in download mode (power+volume_down+home).
10 - run odin.exe (as administrator in win7)
11- connect phone to pc via usb
12 - in odin select ramad's jvb kernel as "pda". execute.
13 - start phone, to be sure reinstall superuser from google play
14 - you're done, now you are rooted with original jvb kernel.
I do not know if this is a robust procedure, but it worked for my italian jw7 rom, hope it is ok for you too.
after gaining root privileges, you can remove semaphore.apk from /system/app with root explorer (download from google play)
Click to expand...
Click to collapse
do u think it ll work coz if ders any danger of bricking my phone i won try pls help me out or else suggest me to downgrade and den root .. pls help me out
vitesh said:
do u think it ll work coz if ders any danger of bricking my phone i won try pls help me out or else suggest me to downgrade and den root .. pls help me out
Click to expand...
Click to collapse
since your phone is not rooted you have to use odin anyway.
"superoneclick" methods do not work with sgs1.
hence, you have to flash a pre-rooted kernel to gain root permissions.
after that you can flash the original kernel thus restoring the original state of the phone, apart from rooting it. you don't lose any data or setting, by the way.
since it looks like you're a cautious guy, I suggest you to study a little bit more thru the forum to understand how flashing kernels with odin works.
you can start by downloading odin, kies, and both kernels, and the whole original rom (you can find that in ramad's thread as well). Ramad's thread explains exactly how to flash with odin, btw.
I'm glad to help, but I'm not taking any responsibility on your behalf. do it at your own risk.
thanks broo ..
lcampori said:
since your phone is not rooted you have to use odin anyway.
"superoneclick" methods do not work with sgs1.
hence, you have to flash a pre-rooted kernel to gain root permissions.
after that you can flash the original kernel thus restoring the original state of the phone, apart from rooting it. you don't lose any data or setting, by the way.
since it looks like you're a cautious guy, I suggest you to study a little bit more thru the forum to understand how flashing kernels with odin works.
you can start by downloading odin, kies, and both kernels, and the whole original rom (you can find that in ramad's thread as well). Ramad's thread explains exactly how to flash with odin, btw.
I'm glad to help, but I'm not taking any responsibility on your behalf. do it at your own risk.
Click to expand...
Click to collapse
hey i followed d way u said n it worked smoothly .. thanks a loy bro .. and now u can u tell me how to go for a custom rom and upgrade my handset to ICS is it possible or do i need to make any more chnges to my handset .. lemme no asap .. thans in advance ..
I thought you wanted to root the phone for basic mods and removing samsung bloatware, not for flashing a custom rom. That's another matter.
if you want to flash a custom rom you need cwm recovery. this is a tool you get in "recovery mode", turn phone off and then power+volume_up+home to get there. some gingerbread custom roms can be flashed with odin, but as far as I know, you can't for ics or jb.
stock recovery won't let you flash any rom.
you do not have cwm recovery on your stock kernel.
to root any custom rom, you have to flash semaphore back again, and stick with that. with semaphore you have cwm recovery, so choose the rom you want to install and follow its thread instructions.
BUT: I've tried LOADS of custom roms, and never been fully satisfied with anyone of them. reboots, phone turns off by itself, limited functionalities, small bugs...
always reverted back to (rooted) stock. I'm never ever going to flash any rom but a stock one anymore. Of course you'll find different opinions on that on xda, this is just my 2 cents.
Lastest stock roms (2.3.6) are fast, smooth and completely bugfree.
Thanks in advance
hey thnks in advance but one of my frns has rooted to ics n he is telling tat phone works smoothly only for video recording and another one app .. rest works fine for him
anything for ram space .. i just have 364 mb ram wich gets almost full quite aftr using d net or running any apps .. pls suggest me any app or anythin wich i can do to increase my ram storage and other things ..
vitesh said:
anything for ram space .. i just have 364 mb ram wich gets almost full quite aftr using d net or running any apps .. pls suggest me any app or anythin wich i can do to increase my ram storage and other things ..
Click to expand...
Click to collapse
search threads for himem kernels. you'll find many of them. you'll probably get another 20 or 30mb. but I'm not going to suggest something I've never tried. current ram to me is more than enough.
regarding ics being faster and smoother, that's a matter of debate. my opinion is that the fastest rom around is cm7.2 (gingerbread), much faster than any ics rom. much more. At least among those I've tried.
the whole point about custom aosp roms is that samsung never released source code on some drivers, hence the little bugs here and there in cm7/9, ics, jb, and so on. that's why stock roms are superior, imho.
if you really want ics, move to sgsII or sgsIII
Rooting query
vitesh said:
Hey guys am new to dis forum and I wanna root my sgs i9000
its an indian version phone n here r d details
PDA - i9000ddjvb
Phone - i9000ddjv7
Csc - i9000ddjvb
Firmware version - 2.3.6
Baseband version - i9000ddjv7
Kernal version - [email protected]#2
Built num - gingerbread.ddjvb
Pls help me n pls provide me step by step instructions as am an begginer n wanna root my handset .. pls help me out guys
Thanks.
Click to expand...
Click to collapse
Hi could you kindly share your detailed procedure of rooting the phone ? as well as any custom rom that you tried after rooting.
mailppl said:
Hi could you kindly share your detailed procedure of rooting the phone ? as well as any custom rom that you tried after rooting.
Click to expand...
Click to collapse
you can flash a Semaphore kernel as PDA in Odin 3, and you will have root as well as CWM or you use any other rooting method from My Android Collections
xsenman said:
you can flash a Semaphore kernel as PDA in Odin 3, and you will have root as well as CWM or you use any other rooting method from My Android Collections
Click to expand...
Click to collapse
Thanks , but could you kindly elaborate a bit more about the process, since I am a newbie to this process. Appreciate your patience .
Regards,
Kaustav.
mailppl said:
Thanks , but could you kindly elaborate a bit mhttp://forum.xda-developers.com/showthread.php?t=1778526re about the process, since I am a newbie to this process. Appreciate your patience .
Regards,
Kaustav.
Click to expand...
Click to collapse
Regarding the rooting process, read the first page. Updating to JB,.......
http://forum.xda-developers.com/showthread.php?t=1778526
ierofantis said:
Regarding the rooting process, read the first page. Updating to JB,.......
http://forum.xda-developers.com/showthread.php?t=1778526
Click to expand...
Click to collapse
Wont help I guess .. as its the procedure for flashing the custom ROM, I was looking for the procedure for rooting Galaxy S GT I9000 on DDJVB Gingerbread 2.3.6 Firmware with CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip using ODIN 3 as suggested above.
mailppl said:
Wont help I guess .. as its the procedure for flashing the custom ROM, I was looking for the procedure for rooting Galaxy S GT I9000 on DDJVB Gingerbread 2.3.6 Firmware with CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip using ODIN 3 as suggested above.
Click to expand...
Click to collapse
ok, I wrote this for a Samsung M110S, What and How to Root so instead of the files mentioned, use the correct ones as given earlier or what you have already mentioned
you are going to do the same procedure but use the i9000 files
Files Needed:-
1. odin3
2. rooting kernel
Lets start :-
1- Download odin3 and one kernel file as given above that you wish to use
2- Unplug any USB device attached to your Computer and shut down kies (if running)
3- Power off the phone.
4- Press and hold Home button with Power button. your phone will go into [Download Mode]
5- run Odin in your PC
6- connect phone in download mode with computer using USB cable [ Odin will detect] and Com port will turn Yellow color
7- Check the PDA radio button and browse for file the kernel of your choice that you have downloaded earlier, than click open
8- Press start button. Odin will start flashing and comport button will turn Green and it will inform you to remove USB connection
9- Phone will reboot and you got your phone rooted
xsenman said:
ok, I wrote this for a Samsung M110S, What and How to Root so instead of the files mentioned, use the correct ones as given earlier or what you have already mentioned
you are going to do the same procedure but use the i9000 files
Files Needed:-
1. odin3
2. rooting kernel
Lets start :-
1- Download odin3 and one kernel file as given above that you wish to use
2- Unplug any USB device attached to your Computer and shut down kies (if running)
3- Power off the phone.
4- Press and hold Home button with Power button. your phone will go into [Download Mode]
5- run Odin in your PC
6- connect phone in download mode with computer using USB cable [ Odin will detect] and Com port will turn Yellow color
7- Check the PDA radio button and browse for file the kernel of your choice that you have downloaded earlier, than click open
8- Press start button. Odin will start flashing and comport button will turn Green and it will inform you to remove USB connection
9- Phone will reboot and you got your phone rooted
Click to expand...
Click to collapse
Thanks a ton...going ahead...will let you know in sometime...
just to add to the earlier post, just in case you have never entered download mode before
For i9000 :- you hold the Volume Down + Home + Power
Note:
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
xsenman said:
just to add to the earlier post, just in case you have never entered download mode before
For i9000 :- you hold the Volume Down + Home + Power
Note:
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
Click to expand...
Click to collapse
Hi Senman,
I have check and KIES is not running , but facing a issue in Odin3 v3.04 , the COM port is not turning yellow after i connect my phone thru usb in download mode. Anything to do with usb debugging enabled/disabled?
Regards,
Kaustav.
mailppl said:
Hi Senman,
I have check and KIES is not running , but facing a issue in Odin3 v3.04 , the COM port is not turning yellow after i connect my phone thru usb in download mode. Anything to do with usb debugging enabled/disabled?
Regards,
Kaustav.
Click to expand...
Click to collapse
yes, enable USB debugging and restart ODin3, always restart after any flash or problem
Odin v3 will turn blue, not yellow
xsenman said:
yes, enable USB debugging and restart ODin3, always restart after any flash or problem
Odin v3 will turn blue, not yellow
Click to expand...
Click to collapse
Hi Senman... Thanks... followed the procedure and I guess the phone is rooted, I can see the cwm , Super user app, Tweaks app. Anything you would recommend to make the phone faster and lagfree... Thanks again for all the support.
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?
dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.
dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).
Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this
Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app
Why will it be hardbricked if the custom roms are based on s5830i stock roms?
But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium
Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .
Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app
Hello everyone. First of all 2 days ago i rooted my phone to be able to use LINK2SD app.
So i started deleting stock apps that i didn't use at all. All working fine on my x8 since i deleted gtalk (I know i am idiot),
and i starting getting this error message: ''The process com.google.process.gaps has stopped unexpectedly. Please try again''.
After that i realize that i cant download anything from market.
I 've formated my SD card's partitions hoping to change something after factory reset but nothing happened. I dont have xrecovery or rom manager.
I am running 2.1-update1 firmare
Baseband version: M76XX-TSNCJOLYM-53404015,
Kernel version: 2.6.29 [email protected] #1
Build number: 2.1.1.A.0.6
I search the net for solutions and some people with the same problem with me have found a solution from PcCompanion or
Sony Ericsson Update but in my case, when i am trying to repair my firmware i have a strange issue.
When my phone is turned off and i hold the "back" button while inserting the USB cable from my PC says: "found new SEMCU"
(or something like that, i dont remember exactly) and my pc freezes after 10 seconds and i can't do anything.
I have to manually reboot it from the shut down button. So I can't update it.
I already tried to reinstall these 2 programms PcC & SEU and the same problem exist.
I also tried to boot to safe mode with connection and do the process again but the same story happends.
I have already read this thread where the thread-starter,
found his solution: ''oh nvm i fixed it, installed rom manager and a few other apks through adb install, and through terminal emulator flashed clockwork, then flashed stock ROM
thanks for all your help!'' but i can't understand what i must do and and i won't do any more damage to my phone.
Sorry if my english is bad.
Can anyone help me please??? I 'm stuck..:crying::crying:
alex23gr said:
Hello everyone. First of all 2 days ago i rooted my phone to be able to use LINK2SD app.
So i started deleting stock apps that i didn't use at all. All working fine on my x8 since i deleted gtalk (I know i am idiot),
and i starting getting this error message: ''The process com.google.process.gaps has stopped unexpectedly. Please try again''.
After that i realize that i cant download anything from market.
I 've formated my SD card's partitions hoping to change something after factory reset but nothing happened. I dont have xrecovery or rom manager.
I am running 2.1-update1 firmare
Baseband version: M76XX-TSNCJOLYM-53404015,
Kernel version: 2.6.29 [email protected] #1
Build number: 2.1.1.A.0.6
I search the net for solutions and some people with the same problem with me have found a solution from PcCompanion or
Sony Ericsson Update but in my case, when i am trying to repair my firmware i have a strange issue.
When my phone is turned off and i hold the "back" button while inserting the USB cable from my PC says: "found new SEMCU"
(or something like that, i dont remember exactly) and my pc freezes after 10 seconds and i can't do anything.
I have to manually reboot it from the shut down button. So I can't update it.
I already tried to reinstall these 2 programms PcC & SEU and the same problem exist.
I also tried to boot to safe mode with connection and do the process again but the same story happends.
I have already read this thread where the thread-starter,
found his solution: ''oh nvm i fixed it, installed rom manager and a few other apks through adb install, and through terminal emulator flashed clockwork, then flashed stock ROM
thanks for all your help!'' but i can't understand what i must do and and i won't do any more damage to my phone.
Sorry if my english is bad.
Can anyone help me please??? I 'm stuck..:crying::crying:
Click to expand...
Click to collapse
try with flashtool
ElmirBuljubasic said:
try with flashtool
Click to expand...
Click to collapse
I have downloaded the firmare.ftf and i have installed all the drivers needed.
When i run flashtool its all ok, recognize my phone, root access etc.
Unfortunatlly when i unplug the device turn it off and plug it again while holding ''back'' button flashtool says error missing drivers,
you can find them on c/flashtool/drivers (i ve already install them..) and the my Pc freezes..And i manually reboot it from start button..
I don't know what to do anymore...
install Xrecovery and flash Gapps.zip for android 2.1 i think you can found somewhere here in this forum use the search button!
and i suggest to upgrade to froyo/Gingerbread because you already rooted and you can install Xrecovery simply and download a Stock ROM flash it! BRAVO! now you can enjoy a more advanced Android version
do we have Gapps for Stock Eclair
95mediatech said:
install Xrecovery and flash Gapps.zip for android 2.1 i think you can found somewhere here in this forum use the search button!
and i suggest to upgrade to froyo/Gingerbread because you already rooted and you can install Xrecovery simply and download a Stock ROM flash it! BRAVO! now you can enjoy a more advanced Android version
do we have Gapps for Stock Eclair
Click to expand...
Click to collapse
Ty man. Sounds very interesting. May you help me posting some step by step instructions? I know i can find related post in forum but i dont know what i must do first! I don't need to unlock bootloader before upgrate? Thanks anyway for ansewring.
alex23gr said:
Ty man. Sounds very interesting. May you help me posting some step by step instructions? I know i can find related post in forum but i dont know what i must do first! I don't need to unlock bootloader before upgrate? Thanks anyway for ansewring.
Click to expand...
Click to collapse
1.Get CWM by x8toolbox
2. Search 'GAPPS for android 2.1' anywhere (Google/xda)
3. Flash the GAPPS zip file via CWM
sent from my BEAST™ W8 Walkman™
Guys, thanks for your help. I finaly find my solution by running the same process with pc companion from another pc..DAMN.
Now i want to upgrate to froyo/gingerbread :angel:
See you around!
hello i've been trying 2 get a new rom for my brother's SGS+
but almost every rom i try (mostly jelly bean and ics roms but also some gb ones) give me n error
when i try 2 install them through recovery mode,
i get error status 7, installation aborted
now i looked for this problem on the internet and it appears there r some solutions found on this link:
http://www.knowtechbetter.com/how-t...ry-cwm-while-installing-flashing-custom-roms/
however i did not understand any of this
i m not new in installing roms and such but i m not very femilier with all these "more complicated" things
i noticed at the comments that the first solution helped someone
and it looks easy, if any1 could explain me shortly how do i do this this would be very helpful.
thanks~
Install newer CWM.. you have to ask this in the special thread made for it
broodplank1337 said:
Install newer CWM.. you have to ask this in the special thread made for it
Click to expand...
Click to collapse
i have faemod v1.2 based on cwm 5.0.2.7 ..
and honestly i dont know which threat you are reffering to
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
mrjraider said:
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
Click to expand...
Click to collapse
if u could help me just a little more, i cant find it.
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
mrjraider said:
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Click to expand...
Click to collapse
thanks i managed 2 install cwm 6
but i encountered a new problem.
i installed the non-touch verision and now i cant do the "select" option
it is supposed 2 be the power button but it doesnt work
so now i cant do anything..
also i tried rom manager but it just opens recovery mode for me
any way i can return to an old verision of recovery w/o using the reovery mode so i can go back and install the touch verision this time?
There are more buttons to use. If i can remember you need to use the menu button
mrjraider said:
There are more buttons to use. If i can remember you need to use the menu button
Click to expand...
Click to collapse
tried them all.. i am really stuck here
appearntly alot of ppl have this problem.
is there any way to install it through odin or some other app?
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
mrjraider said:
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
Click to expand...
Click to collapse
maybe im doing it wrong but odin doesnt even recognise the file.. and there is no guide there
i did try a odin flashable cwm V6 but its stuck on "setup connection" each time i try..
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Just flash TWRP and you're good to go
Sent from my GT-I9001 using xda app-developers app
mrjraider said:
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Click to expand...
Click to collapse
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
hey man relax... in wiki page you'll find cwm5.5.0.4 flashable zip and you can install it from recovery ( even from stock recovery if i remember corectly)... if you can't acces your phone you can copy it from pc to phone using recovery ( mounts and storage )... if you are stuck in recovery( you're phone boot in recovery only ) you'll need to flash the bootloader using odin.. also you can find the steps and necessary files in wiki and in cm10 by ivendor in firrst post ..Good Luck !!!
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
mrjraider said:
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
Click to expand...
Click to collapse
see the problem?
http://i39.tinypic.com/amp1ch.png
the thing is even tho i read your guide it seem like im doing something wrong..
for instance when i add the files both ops and "one package" file it doesnt see them so i have to write their location
shahaf321 said:
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
Click to expand...
Click to collapse
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
educk said:
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
Click to expand...
Click to collapse
i did try using his guide and i folowed it step by step
my only problem is that odin gives me that message i showed in my last post..
also untill i fix this soft brick i cant move on to recovery mode so
i need 2 fix that first..
the guide doesnt show anything related to what im doing wrong..
Someone with brains would have removed odin, and the ops file and redownloaded it again. Also save those on your desktop