HI Friends,
I was using custom roms before, but now i have reverted back to LG ROM v20G(india) android 2.3.4.
Since, i was not able to install some applications(for my office email and communicator) due to rooted device error, so i reverted back to LG ROM.
But after installing few applications my mobile became very slow, every time i have to clean RAM using task manager.
Is there a better ROM(unrooted ROM) suggestion ?
Thanks in advance.
deepsas said:
HI Friends,
I was using custom roms before, but now i have reverted back to LG ROM v20G(india) android 2.3.4.
Since, i was not able to install some applications(for my office email and communicator) due to rooted device error, so i reverted back to LG ROM.
But after installing few applications my mobile became very slow, every time i have to clean RAM using task manager.
Is there a better ROM(unrooted ROM) suggestion ?
Thanks in advance.
Click to expand...
Click to collapse
Currently, No Devs are doing that as there is no point to it. But since you say so, I will make a Unrooted ROM
Sent from my LG-P970 using Tapatalk 2
Oh!! That will be better... Thanks a lot...
Or, else is there any way like i can remove some unwanted apps from the LG ROM without rooting it...
deepsas said:
Oh!! That will be better... Thanks a lot...
Or, else is there any way like i can remove some unwanted apps from the LG ROM without rooting it...
Click to expand...
Click to collapse
No way... Except for removing them before even flashing the ROM. But I think you are a bit wrong though. What ROM did you use before? I mean, while you were rooted? And what apps exactly havent you been able to install? Sounds strange to me...
N00BY0815 said:
No way... Except for removing them before even flashing the ROM. But I think you are a bit wrong though. What ROM did you use before? I mean, while you were rooted? And what apps exactly havent you been able to install? Sounds strange to me...
Click to expand...
Click to collapse
HI N00BY0815, Thanks for yor reply.
Earlier i was using zeus 7.03 ROM and there i was able to install the zenprise application but it was not able to configure properly and used to get error like "This device is rooted" something like that. Bcz of this i was unable to configure the MS Exchange email and Microsoft Lync 2010 apps(bcz they are dependent on zenprise to get my enterprise server details).
Now i have reverted to LG stock ROM v20G and able to configure everything successfully and all are working.
But my mobile becoming damn slow, and it is showing only 23 mb RAM is free. :crying:
deepsas said:
HI N00BY0815, Thanks for yor reply.
Earlier i was using zeus 7.03 ROM and there i was able to install the zenprise application but it was not able to configure properly and used to get error like "This device is rooted" something like that. Bcz of this i was unable to configure the MS Exchange email and Microsoft Lync 2010 apps(bcz they are dependent on zenprise to get my enterprise server details).
Now i have reverted to LG stock ROM v20G and able to configure everything successfully and all are working.
But my mobile becoming damn slow, and it is showing only 23 mb RAM is free. :crying:
Click to expand...
Click to collapse
Hmm maybe you could still use Zeus ROM, but with a minor change in kernel, that is to change
ro.secure=0 to ro.secure=1 in ramdisk. This will pretend, the cell is still unrooted and thus everything should install just fine. Though you might get some problems with some apps, that need root.
Can some1 upload a flashable zip of this, since I dont really have time currently? Just decompile the boot.img with dsixda's android kitchen, change that line and recompile it. Flash and your done
N00BY0815 said:
Hmm maybe you could still use Zeus ROM, but with a minor change in kernel, that is to change
ro.secure=0 to ro.secure=1 in ramdisk. This will pretend, the cell is still unrooted and thus everything should install just fine. Though you might get some problems with some apps, that need root.
Can some1 upload a flashable zip of this, since I dont really have time currently? Just decompile the boot.img with dsixda's android kitchen, change that line and recompile it. Flash and your done
Click to expand...
Click to collapse
Thanks a lot for your suggestion, but i am not that much talented to do those things.
I will wait for it.....
deepsas said:
Thanks a lot for your suggestion, but i am not that much talented to do those things.
I will wait for it.....
Click to expand...
Click to collapse
Did you already try a rooted stock ROM, which has to be flashed via Smartflash? It's quite simple, since there also is a video guide (check my how to, post #3 includes the link to the thread with the video). Then you ll have root, but kernel will still state ro.secure=1. So you can almost do everything you want, but the phone will still think, it's still unrooted. Just pick the same version as you already have in kdz format (e.g. v20n, v20O, v20s,...) extract it with the tool mentioned, inject cwm, flash superuser.apk, dont wipe anything and you ll have root and all your data still. If it still detects the phone as rooted then, you ll have to go back to stock and reinstall everything, but it's still worth a try Then you can uninstall all LG crap apps and will have more free ram. Or you wait for anyone to provide an unrooted ROM with all unnecessary apps removed and maybe some tweaks enabled
Hey do not install v20g its the worst update given by lg India.
I to installed it and even lg service centre guy reverted my ob to previous version saying that v20g is faulty.
Sent from my LG-P970 using xda premium
I can create a unrooted ROM. note, you cannot do much. Nooby, lets just make his wish come true. i'll make the unrooted one.
Sent from MercurySandwich
SoulExertz said:
I can create a unrooted ROM. note, you cannot do much. Nooby, lets just make his wish come true. i'll make the unrooted one.
Sent from MercurySandwich
Click to expand...
Click to collapse
I already told you in PM, I am out of time currently. But you re free to help him, if you want.
abhi_g1 said:
Hey do not install v20g its the worst update given by lg India.
I to installed it and even lg service centre guy reverted my ob to previous version saying that v20g is faulty.
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
thanks for your reply. so, which rom u r using currently and how it is?
Sent from my LG-P970 using xda premium
SoulExertz said:
I can create a unrooted ROM. note, you cannot do much. Nooby, lets just make his wish come true. i'll make the unrooted one.
Sent from MercurySandwich
Click to expand...
Click to collapse
ok no issue, i will wait for the same. thank you.
Sent from my LG-P970 using xda premium
deepsas said:
thanks for your reply. so, which rom u r using currently and how it is?
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
i m currently using cm10 but if you want stock rom then better use v20f
abhi_g1 said:
i m currently using cm10 but if you want stock rom then better use v20f
Click to expand...
Click to collapse
oh!! sorry, i want an unrooted ROM.
MIUI is has no superuser
apps can't access root (though i found that solid explorer was able to look at system files but not modify things)
if your apps do not work because of root access, try MIUI JB
theaks30 said:
MIUI is has no superuser
apps can't access root (though i found that solid explorer was able to look at system files but not modify things)
if your apps do not work because of root access, try MIUI JB
Click to expand...
Click to collapse
It will probably still be recognized as rooted, because the kernel will still state: ro.secure=0, which equals a rooted device. Of course, I dont really know, how this app detects, if the phone is rooted. It might also be the superuser.apk, but I dont really think so...
N00BY0815 said:
It will probably still be recognized as rooted, because the kernel will still state: ro.secure=0, which equals a rooted device. Of course, I dont really know, how this app detects, if the phone is rooted. It might also be the superuser.apk, but I dont really think so...
Click to expand...
Click to collapse
There is two ways. Look at ro.secure or call /bin/su and see if it works.If a app only wants to check and not ask for permissions then I think they'll look at ro.secure
xonar_ said:
There is two ways. Look at ro.secure or call /bin/su and see if it works.If a app only wants to check and not ask for permissions then I think they'll look at ro.secure
Click to expand...
Click to collapse
I have made a stock based non rooted ROM with tweaks. its extremely minor.. waiting for a day for it to be confirmed as stable
Sent from MercurySandwich
theaks30 said:
MIUI is has no superuser
apps can't access root (though i found that solid explorer was able to look at system files but not modify things)
if your apps do not work because of root access, try MIUI JB
Click to expand...
Click to collapse
Is it a stable one ?
Related
Anyone used this? Im still on the original recovery so not sure if i should use this or what i should do? Any ideas? Suggestions?
Sent from my ADR6300 using XDA App
It was quick and easy to run it again...if you've already done it the first time it's just going to update to the newest recovery version...about 5 minutes of your time
well we've all used it, its the only way right now to get roms and easily get into adb in recovery, its very easy to do
just reflashed the updated version and did fine
Just did it... im pretty familiar with android but not using a tool to flash recovery. Tried a couple of different ROMs but waiting for something that is actually better than my senseUI people complain but its better tan stock. Just makes for longer update waits. Wish we could port bookmarks widget.
Sent from my ADR6300 using XDA App
I'm a bit confused. Why would we wanna upgrade to ClockworkMod Recovery 2.0.1.3? Is there more functionality in that newer release?
no not really lol... just a newer version
yojoe600 said:
no not really lol... just a newer version
Click to expand...
Click to collapse
Oh i thought i was missing something. I already started downloading version 2 lol. Still very new to the Android world.
Bxsteez said:
I'm a bit confused. Why would we wanna upgrade to ClockworkMod Recovery 2.0.1.3? Is there more functionality in that newer release?
Click to expand...
Click to collapse
rom manager automatically update it. i think.
zeke1988 said:
rom manager automatically update it. i think.
Click to expand...
Click to collapse
I thought i was reading that the update didn't hold when done through ROM Manager.
yea i heard that rom manager only thinks that it works... bc if u flash into recovery without going to rom manager it still has the only version
ksizzle9 said:
Just did it... im pretty familiar with android but not using a tool to flash recovery. Tried a couple of different ROMs but waiting for something that is actually better than my senseUI people complain but its better tan stock. Just makes for longer update waits. Wish we could port bookmarks widget.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I use Visual Bookmarks to replace the Sense widget, gets the job done.
Currently only the reflash v2.0 tool can update to ClockworkMod Recovery v2.0.1.3.
nfcrockett said:
Currently only the reflash v2.0 tool can update to ClockworkMod Recovery v2.0.1.3.
Click to expand...
Click to collapse
what about manually flashing with flash_image?
EDIT: nvm, we need an unlocked nand for that
Thanks to all guys who help me in the other thread...
Nexus is a really fantastic phone...so smooth...
now...I need some advice:
1) I think now is installed the official 2.2.1, I need to root, do you think it's better to root on my 2.2 or install a custom ROM? if yes, what rom?
2)there is a way to wake up the phone when it is sleeping with the trackball?
thanks a lot in advace
Definitely root and try some of the gingerbread Roms. I'm on miui 1.6.10 and really enjoy the hybrid android and iPhone feel. Cm7 nightly is really nice too.
Sent from my Nexus One using XDA Premium App
RealPsygnosis said:
1) I think now is installed the official 2.2.1, I need to root, do you think it's better to root on my 2.2 or install a custom ROM? if yes, what rom?
Click to expand...
Click to collapse
yeah root 2.2 then install a rom
RealPsygnosis said:
2)there is a way to wake up the phone when it is sleeping with the trackball?
Click to expand...
Click to collapse
Yep the way I use is cyanogenmod 7 Nightlies which come with that feature I don't know if MIUI rom would have it or not never tried it
so to install a rom I have to root before....
Rom have all languages?
Maybe I can try the cyanogen based on 2.3? does it have some important issue? or it's better to stay with a rom based on 2.2?
Any rom have pre-installed App2SD? or I have to install it on my own?
if you don't want to flash a custom rom try superoneclick on this forum
RealPsygnosis said:
2)there is a way to wake up the phone when it is sleeping with the trackball?
thanks a lot in advace
Click to expand...
Click to collapse
Yes. No Lock by BOD. Been using it for a year now. No issues with it. https://market.android.com/details?id=org.jraf.android.nolock&feature=search_result
I don't have problem to install ROM, I just like that the rom is in italian language...(at least for now) :|
@bobbyphoenix
It's not what I looking for...mmm do you know iphone? that you can light on the display when it is in stand by with the home button?
so i need the same, because wake up the display with the power button is really annoying...
----
So I follow some tutorial to root and than I can install a rom like cyanogen?
I go to the 2.3? or 2.2?
it's normal that the phone is warm in the rear-bottom part when I use it?
I have just the wifi on and i go to the market open apps and so on...
thanks
you absolutely should be going for cyanogen 7 which is 2.3.4 based ROM. that has trackball wake and all the good stuff like color trackball alerts, etc.
then you can try MIUI if you like.
but those are the no brainers to go to.
ok so I have to root the phone when it is still on 2.2.1 and than install cyanogen...I find the tutorial here?
anyway
it is normal that the phone is warm during the intense use of app and game, and that is really hot now that is on charge?
thanks
To root the phone I have to loose the guarantee?
RealPsygnosis said:
anyway
it is normal that the phone is warm during the intense use of app and game, and that is really hot now that is on charge?
thanks
Click to expand...
Click to collapse
Yes. You remind me of when I first got mine. It felt like I could fry an egg. I got used to it though. I think it has to do with how the phone is designed. The aluminum body brings the heat to the outside surface. Nothing to worry about.
Sent from my Nexus One using XDA Premium App
thanks a lot bobby
and what about this:
ok so I have to root the phone when it is still on 2.2.1 and than install cyanogen...I find the tutorial here?
To root the phone I have to loose the guarantee?
Click to expand...
Click to collapse
The strange thing about this is that I can't ugrade via OTA, it said that I have the lastest version ?_?
I have the radio rom 32.50.00.32U_5.12.00.08
This is 1-Click root for N1 (2.2)
[APP] [ROOT] 1-click root for N1 (Latest ver: 1.6.2 beta 5)
can I use THIS to root? does this unlock the bootloader?
then I have to install a recovery and then the custom rom right?
Can someone link me a tutorial to install windows driver for N1?thanks
no one can tell me?
RealPsygnosis said:
Can someone link me a tutorial to install windows driver for N1?thanks
Click to expand...
Click to collapse
Just search Nexus One windows driver in google, then download and install like any other file.
I got the drivers for my N1 at theunlockr.com, It's very detailed with a video and written walkthrough (props to the unlockr.com). here's the link:
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
After I unlocked the bootloader using the tutorial above, I rooted my N1 using another walkthtough at the unlockr.com, here's the link:
http://theunlockr.com/2010/01/02/how-to-root-the-nexus-one/
Let us know how it goes.
Sent from my Nexus One using XDA Premium App
everything goes fine I've rooted it without unlocking the bootloader...
Anyone know how I can turn of the screen rotation on homescreen? with cyanogen
RealPsygnosis said:
everything goes fine I've rooted it without unlocking the bootloader...
Anyone know how I can turn of the screen rotation on homescreen? with cyanogen
Click to expand...
Click to collapse
It's under the ADW.Launcher settings. The easiest method:
MENU>MORE>ADWSettings>SYSTEM PREFERENCES>HOME ORIENTATION
Sent from my Nexus One using XDA Premium App
Hi,
This is a small CWM zip to add the [email protected] line to your existing boot and recovery partitions to fix the ram issue with the international unlocked bootloader. If the second mem is already there it does nothing.
The point of this is you can have a regular recovery flashed and fix the ram issue without wondering what tegra part you have, it preserves your serial number as well. More useful with stock boot images than custom ones that already have this done.
To use:
Flash with a CWM recovery supporting edify scripting. That means you have an unlocked recovery basically.The program inside the zip can be used on it's own to list the cmdlines already in your phone, or to set them to something else.
As cmdline, it lists, as setcmdline it sets the entire thing, as addcmdline it adds on to the end of the existing cmdline.Cheers!
Great! Looks like our bell friends are having good development as well.
Sent from my MB860 using XDA Premium App
NF, cheers bro I really appreciate the work from you.
Sent from my MB860 using XDA Premium App
So would i need to flash this once and then any ROM I install will have fixed RAM, or do I need to flash this after every installation?
IUH1991 said:
So would i need to flash this once and then any ROM I install will have fixed RAM, or do I need to flash this after every installation?
Click to expand...
Click to collapse
You can just keep it handy on your sdcard and use when needed, it depends on the "rom" you flash, it may or may not have a ram fix solution built in.
Cheers!
J-Roc said:
NF, cheers bro I really appreciate the work from you.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
You're welcome.
Cheers!
NFHimself said:
You can just keep it handy on your sdcard and use when needed, it depends on the "rom" you flash, it may or may not have a ram fix solution built in.
Cheers!
Click to expand...
Click to collapse
It depends on the Kernel the Rom has within it, nothing else.
Furthermore, no offense. But this is kinda useless now. Did you not know we have unified Kernel's? If someone made a Rom without a unified kernel, they can basically shove that Rom.
I do not see a point in this at all. I guess maybe for testing old Roms.....
NFHimself said:
You can just keep it handy on your sdcard and use when needed, it depends on the "rom" you flash, it may or may not have a ram fix solution built in.
Cheers!
Click to expand...
Click to collapse
So solid man, keep up the good work!
nexxusty said:
It depends on the Kernel the Rom has within it, nothing else.
Furthermore, no offense. But this is kinda useless now. Did you not know we have unified Kernel's? If someone made a Rom without a unified kernel, they can basically shove that Rom.
I do not see a point in this at all. I guess maybe for testing old Roms.....
Click to expand...
Click to collapse
Hi,
I addressed this already in the OP. It's more for use with stock kernels.
Can you compile the motorola kernel source (pick one) and get a binary exact match for the stock Bell kernel?
No offense to the guys working on kernel's here, but I am not really compelled by the added features/bug fixes, and am concerned more about stability, especially when the source seems to be ATT based. Which is fine if you are running an ATT framework "rom/theme" I guess, even better if you have an ATT phone.
Cheers!
NFHimself said:
Hi,
This is a small CWM zip to add the [email protected] line to your existing boot and recovery partitions to fix the ram issue with the international unlocked bootloader. If the second mem is already there it does nothing.
The point of this is you can have a regular recovery flashed and fix the ram issue without wondering what tegra part you have, it preserves your serial number as well. More useful with stock boot images than custom ones that already have this done.
To use:
Flash with a CWM recovery supporting edify scripting. That means you have an unlocked recovery basically.The program inside the zip can be used on it's own to list the cmdlines already in your phone, or to set them to something else.
As cmdline, it lists, as setcmdline it sets the entire thing, as addcmdline it adds on to the end of the existing cmdline.Cheers!
Click to expand...
Click to collapse
Hi is this fix for when i flash IHOP and get ram problem it fix that or its universal for every kernel (Gb froyo ROMs etc) ?
so does this mean it is actually possible to download more ram??
xateeq said:
Hi is this fix for when i flash IHOP and get ram problem it fix that or its universal for every kernel (Gb froyo ROMs etc) ?
Click to expand...
Click to collapse
Yes, what you said.
Cheers!
geishroy said:
so does this mean it is actually possible to download more ram??
Click to expand...
Click to collapse
Uhm, what?
Cheers!
geishroy said:
so does this mean it is actually possible to download more ram??
Click to expand...
Click to collapse
Download more RAM? Umm...did you even read this before you posted it? or do you know absolutely nothing about what RAM is?
geishroy said:
so does this mean it is actually possible to download more ram??
Click to expand...
Click to collapse
So many people don't understand what Ram actually is *sigh*
You're not the first, I see it EVERYWHERE, google it up!
Thanks a lot, because i was having ram issue with eternity project kernel, and your patch solve it !
Sent from my MB860 using XDA App
dnsdenis said:
Thanks a lot, because i was having ram issue with eternity project kernel, and your patch solve it !
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Glad it worked out!
Cheers!
System Ram lists 816 total, so I should be in the clear or should I apply it anyways? Is there not a gig of ram on this thing or is some gpu/frame buffer dedicated?
drolgnir said:
System Ram lists 816 total, so I should be in the clear or should I apply it anyways? Is there not a gig of ram on this thing or is some gpu/frame buffer dedicated?
Click to expand...
Click to collapse
You are in the clear.
Cheers!
So, if I understand this correctly, when I flash this it will auto-fix any ROM, kernel or custom recovery that I install?
As the name implies this is a bone stock rooted ROM with the exception of root and busy and its de-odexed.
I also updated all the apps. So its not really bone stock but.. Close enough
This ROM has two purposes...
1. For someone that wants just that, a stock rooted ROM with no mods.
2. For others that want to dive into development or at least tinker around with there own custom ROM. This is a great base to work from! All the menial tasks such as rooting and de-odeodexing have been done for you.
Hope you find value in this!
-Scott
Please hit the Thanks button if you like this offering. Hit the Donate button if you really like it
Reserved for possible future use...
Is this for Wifi only? or does it make a difference?
mvaughn12 said:
Is this for Wifi only? or does it make a difference?
Click to expand...
Click to collapse
Correct, WiFi only. GT-P7510 = WiFi only model.
It may work on on the variants but I really dont know because I dont have one.
If the mount points are the same then you can flash it and let us know.
What model do you have?
I have the wifi only, and am trying to get a stock only rom thats rooted, i download a rom and each time i try to download from market i keep getting download failed so i figured i try stock again and yours looks prettty promising.
mvaughn12 said:
I have the wifi only, and am trying to get a stock only rom thats rooted, i download a rom and each time i try to download from market i keep getting download failed so i figured i try stock again and yours looks prettty promising.
Click to expand...
Click to collapse
If you get download failed try to clear market data in Application Settings. That usually fixes the dreaded market download failure.
Thanks, I tried that several times still could not get it work work hopefully your rom will fix this for me.
mvaughn12 said:
Thanks, I tried that several times still could not get it work work hopefully your rom will fix this for me.
Click to expand...
Click to collapse
Yes, let me know. I would be interested to see.
Also, did you try to wipe cache and dalvik cache?
Not sure whats going one but all 8 of my devices from my tablets to my phone are getting a unable to download due to a (-101 error) I emailed the market to see what the issue is.
mvaughn12 said:
Not sure whats going one but all 8 of my devices from my tablets to my phone are getting a unable to download due to a (-101 error) I emailed the market to see what the issue is.
Click to expand...
Click to collapse
Wow... I wonder if they locked your account or something. I just tried on my phone and it was fine. Making a new Tab ROM so I cant test that now.
Did you Google the error by any chance?
I googled it and it seems like there was a issue like this last year and it was due to a download limit supposley it was fixed then
I'm on stock KMN that I rooted myself and am showing an update to KMP, but it fails every time so I figure it's probably due to the fact that I'm rooted.
That said, I thought I would give this a try, but I'm loath to reinstall everything afterwards so my question is whether this requires a wipe? I'm assuming this is installed from recovery, is that right?
Quist said:
I'm on stock KMN that I rooted myself and am showing an update to KMP, but it fails every time so I figure it's probably due to the fact that I'm rooted.
That said, I thought I would give this a try, but I'm loath to reinstall everything afterwards so my question is whether this requires a wipe? I'm assuming this is installed from recovery, is that right?
Click to expand...
Click to collapse
nope...no wipe required.
ezcats said:
nope...no wipe required.
Click to expand...
Click to collapse
But highly recommended.
Sent from my SGH-T989 using xda premium
Towle said:
But highly recommended.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
no...its not....when you are updating to a newer version of a samsung stock rom...you never need to wipe...from ICS here..yes..from 3.2 to 3.1 ....yes
3.1 or 3.2 to this...no
ezcats said:
no...its not....when you are updating to a newer version of a samsung stock rom...you never need to wipe...from ICS here..yes..from 3.2 to 3.1 ....yes
3.1 or 3.2 to this...no
Click to expand...
Click to collapse
Oh wow lol my bad I have no idea how I clicked on this thread, I thought I was in the Clean ROM thread. So I was like, uh yeah you should wipe lol But wrong thread sorry.
Sent from my SGH-T989 using xda premium
Are your downloads on your own server or something? Just wondering why it takes a while to download your roms.
Is Touchwiz included in this stock?
mvaughn12 said:
Is Touchwiz included in this stock?
Click to expand...
Click to collapse
Yes.
Sent from my SGH-T989 using xda premium
Jay Rock said:
Are your downloads on your own server or something? Just wondering why it takes a while to download your roms.
Click to expand...
Click to collapse
Yeah...he should make a mirror...but its not slow...it took about 3 minutes compared to like 2 from media fire.
Hi all. I've just installed the new Huexxx Rom Zeus v 7.0 for my OB. The first App I've installed is Euronews, that worked perfect with the Rom stock 2.3. The App it's correctly installed, it starts, but doesn't reproduce the video stream (not in Wi-Fi neither in 3g).
I thought was a build.prop compatibility problem, so I've analized the build.prop file, comparing the Zeus vs the Lg stock, to find the difference and trying to make some changes to make believe the app that it's a Rom stock. But nothing changed. Any suggestions?
Btw I paste here the biggest differences that I found and I changed (in Zeus the 262 it's EUR, so I put it back to 262):
ro.product.device=bproj_262-XXX
ro.build.product=bproj_262-XXX
ro.build.fingerprint=lge/lge_bproj/bproj_262-XXX:2.3.4/GRJ22/LG-P970-V20n.424C866C:user/release-keys
I've noticed too that in Zeus is totally missing a line. Do you know what it really could means (something related to the recovery?):
ro.com.google.mcc_fallback=262
For a better analysys I attached the comparison of the two build.prop file made in excel.
Thanks for any kind of help you can give me, and sorry for my long post.:cyclops:
cippoci said:
Hi all. I've just installed the new Huexxx Rom Zeus v 7.0 for my OB. The first App I've installed is Euronews, that worked perfect with the Rom stock 2.3. The App it's correctly installed, it starts, but doesn't reproduce the video stream (not in Wi-Fi neither in 3g).
I thought was a build.prop compatibility problem, so I've analized the build.prop file, comparing the Zeus vs the Lg stock, to find the difference and trying to make some changes to make believe the app that it's a Rom stock. But nothing changed. Any suggestions?
Btw I paste here the biggest differences that I found and I changed (in Zeus the 262 it's EUR, so I put it back to 262):
ro.product.device=bproj_262-XXX
ro.build.product=bproj_262-XXX
ro.build.fingerprint=lge/lge_bproj/bproj_262-XXX:2.3.4/GRJ22/LG-P970-V20n.424C866C:user/release-keys
I've noticed too that in Zeus is totally missing a line. Do you know what it really could means (something related to the recovery?):
ro.com.google.mcc_fallback=262
For a better analysys I attached the comparison of the two build.prop file made in excel.
Thanks for any kind of help you can give me, and sorry for my long post.:cyclops:
Click to expand...
Click to collapse
Don't harass the build prop. Something can go wrong
Sent from my LG Optimus Black using xda premium
SoulExertz said:
Don't harass the build prop. Something can go wrong
Click to expand...
Click to collapse
Thnx for the replay Soul, but something already went wrong seen that Euronews doesn't stream the video. In anycase I saved a copy of the original one. No any other issue.. so far.. the problem is that I watch often the news but I like also the new Zeus too:crying:
PS: I've tried to put on also others Zeus version (ex. the very stable 6.39) and the problem persist:silly:
cippoci said:
Thnx for the replay Soul, but something already went wrong seen that Euronews doesn't stream the video. In anycase I saved a copy of the original one. No any other issue.. so far.. the problem is that I watch often the news but I like also the new Zeus too:crying:
PS: I've tried to put on also others Zeus version (ex. the very stable 6.39) and the problem persist:silly:
Click to expand...
Click to collapse
You should reflash using smartflashtool.
Sent from my LG-P970 using xda premium
SoulExertz said:
You should reflash using smartflashtool.
Click to expand...
Click to collapse
Sorry Soul but I cannot understand why I have to use smartflashtool:silly:. My Lg isn't bricked, it works fine, fast and fluid. The only problem is with the app of Euronews. That's all. I've already flashed successfully the Zeus via Clockworkmod from a the zip file uploaded by Huexxx some days ago, why I have to repeat all from the start?
Maybe try zeus v6.9 open Europe? That would sound more suitable for ur region and more ppl have that rom in contrast to v7 because heuxxx hasn't really been 'officially' released. I mean heuxxx hasn't updated his thread, posted changelog, etc.
Since more ppl have it, there may be others with ur same problem.
Sent from my LG-P970 using Tapatalk 2
FunkyGanja said:
Maybe try zeus v6.9 open Europe? That would sound more suitable for ur region and more ppl have that rom in contrast to v7 because heuxxx hasn't really been 'officially' released. I mean heuxxx hasn't updated his thread, posted changelog, etc.
Since more ppl have it, there may be others with ur same problem.
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Frankly I've already flashed on also the 6.39, but the bug for Euronews still remain. App installed, start, but no video stream. I've tried to solve myself editing the build prop, but it doesn't seem take any effect.
I saw that you got the 6.39 you too FunkyGanja. I wonder if you have the same problem with the same app (Euronews). I thank you in advance for any kind of help.
Bye:good:
cippoci said:
Frankly I've already flashed on also the 6.39, but the bug for Euronews still remain. App installed, start, but no video stream. I've tried to solve myself editing the build prop, but it doesn't seem take any effect.
I saw that you got the 6.39 you too FunkyGanja. I wonder if you have the same problem with the same app (Euronews). I thank you in advance for any kind of help.
Bye:good:
Click to expand...
Click to collapse
This could be related to the App
Sent from my LG-P970 using Tapatalk 2
SoulExertz said:
This could be related to the App
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I suppose so, cuz any other app work well. It's a pity.