Database Develop

Yaos updater crashs!!!!

Hey xda......
i have a prob with the jb rom "jro03l 4.1.1. Rc10 beta"
The Yaos updater crashs every time i start it.
can someone help.....please?
"sry 4 bad english"
Sent from my GT-I9000 using xda app-developers app

have you tried to reflash and do all 3 wipes?
Try to wipe befor and after the flash.

Richy1989 said:
have you tried to reflash and do all 3 wipes?
Try to wipe befor and after the flash.
Click to expand...
Click to collapse
Thx for your answer.
I try it now.Do you mean cache and dalvik wipe after flashing?

djceet said:
Thx for your answer.
I try it now.Do you mean cache and dalvik wipe after flashing?
Click to expand...
Click to collapse
Yes.
This is my typical flash procedure and i never had any problems (so far )
1) wipe data/Factory reset
2) cache and dalvik wipe
3) Fix Permissions
4) flash new rom
5) step 1 - 3 again

Richy1989 said:
Yes.
This is my typical flash procedure and i never had any problems (so far )
1) wipe data/Factory reset
2) cache and dalvik wipe
3) Fix Permissions
4) flash new rom
5) step 1 - 3 again
Click to expand...
Click to collapse
Doesn`t work.....
Now my SGS1 will get the full JVU-Punch.

Found this in an other topic:
Originally Posted by beint
I installed from the Extras app(CVM, wipe cache, wipe Dalvik, flash). Then when trying to open, the app closes. Just saying it stopped. Even tried clearing data and retry, still same. Anyone else?
Sent from my GT-I9000
read carefully the known bugs plz..
put the Language to Spanish to make it work...
(also devs are tryin to fix it)

Ok...it works!!!!
To use the new EXTRA APP you have to change the language to spain :silly:
I downloaded the GAPPS RC10 and the WEATHER APP RC10.
Now i wait for a fix

stuck with samsung logo

HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD

Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?

still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me

Can you post call recorder thread link you tried to flash?
Sent with L0VE

baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached

sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.

ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE

Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,

sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.

letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,

sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?

letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India

Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium

i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot

I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium

[Q] Installing CM9 on X8 (require guide)

Hello and sorry if I asked this on the wrong section.I just made this account hours ago.
Anyway...
I have successfully installed MiniCM9 but unfortunately I have "No Service" problem.
I searched through the web and find out that it might be sim lock or something.
I used "msm7227_semc" to unlock my bootloader so that probably the problem.
So I reset my phone with Sony PC Companion.
I want to reinstall CM9 but It might happen again.
So can someone please guide me through the installation and give me link for file I need because I have no idea if I'm using the right file.
Thank you.

mafiarangers said:
Hello and sorry if I asked this on the wrong section.I just made this account hours ago.
Anyway...
I have successfully installed MiniCM9 but unfortunately I have "No Service" problem.
I searched through the web and find out that it might be sim lock or something.
I used "msm7227_semc" to unlock my bootloader so that probably the problem.
So I reset my phone with Sony PC Companion.
I want to reinstall CM9 but It might happen again.
So can someone please guide me through the installation and give me link for file I need because I have no idea if I'm using the right file.
Thank you.
Click to expand...
Click to collapse
Flash a CLEAN rom..
wipe every damn thing properly!!
WIPE!!!!

goudaniket said:
Flash a CLEAN rom..
wipe every damn thing properly!!
WIPE!!!!
Click to expand...
Click to collapse
My phone is okay.I reset it to original.
I just want to install CM9 properly.
I don't have any problem with my phone.

mafiarangers said:
My phone is okay.I reset it to original.
I just want to install CM9 properly.
I don't have any problem with my phone.
Click to expand...
Click to collapse
Exactly ..
thats what m saying..
FLASH it CLEAN!
as in.,
wipe data/factory reset, wipe cache , dalvik cache
mount and storage..
format /system, /data, / cache

goudaniket said:
Exactly ..
thats what m saying..
FLASH it CLEAN!
as in.,
wipe data/factory reset, wipe cache , dalvik cache
mount and storage..
format /system, /data, / cache
Click to expand...
Click to collapse
Then?

mafiarangers said:
Then?
Click to expand...
Click to collapse
I believe it's on the 1st post of the rom and kernel (the steps).
Here's the short version:
1. Go to recovery
2. Full wipe, cache, etc
3. Flash correct kernel
4. Format system cache data
5. Flash rom
Why ics though?

[Q] X8 ShockGensMODv03

Hi.
I'm new and i say hello to everybody !
I'm using Xperia X8 custom kernel on stock kernel. I'll try lots of ROM's. and now i'm testing ShockGensMODv03 nad it's very, very fast. Even that GingerDX. Different rom's has other install metod. What i should to install this?
1. Full wipe
2. Install custom .zip
3. Full wipe
4. Wipe battery?
Should i wipe battery? maybe I should do something else?
Thanks for help
Greets

same as other roms
kliFt said:
Hi.
I'm new and i say hello to everybody !
I'm using Xperia X8 custom kernel on stock kernel. I'll try lots of ROM's. and now i'm testing ShockGensMODv03 nad it's very, very fast. Even that GingerDX. Different rom's has other install metod. What i should to install this?
1. Full wipe
2. Install custom .zip
3. Full wipe
4. Wipe battery?
Should i wipe battery? maybe I should do something else?
Thanks for help
Greets
Click to expand...
Click to collapse
Shockgensmod can be installed by same method as other roms are done.....go into recovery wipe everything and then select roms shockgensmodv03.zip from sd card and simply reboot.....:good::good:

vineeth15 said:
Shockgensmod can be installed by same method as other roms are done.....go into recovery wipe everything and then select roms shockgensmodv03.zip from sd card and simply reboot.....:good::good:
Click to expand...
Click to collapse
Hmm... wipe everything? Battery, davlik, cache? After install custom zip sholud I full wipe? And why?

kliFt said:
Hmm... wipe everything? Battery, davlik, cache? After install custom zip sholud I full wipe? And why?
Click to expand...
Click to collapse
Wipe Dalvik cache, cache partition and factory reset, why? To avoid bugs( but some roms have known bugs that full wipe can't fix)

ryanperez said:
Wipe Dalvik cache, cache partition and factory reset, why? To avoid bugs( but some roms have known bugs that full wipe can't fix)
Click to expand...
Click to collapse
Thanks. I have the last question. When should I wipe battery?

kliFt said:
Thanks. I have the last question. When should I wipe battery?
Click to expand...
Click to collapse
You mean wipe battery stats? You don't need to. It doesn't really do anything.

cascabel said:
You mean wipe battery stats? You don't need to. It doesn't really do anything.
Click to expand...
Click to collapse
Okey. And the last my questions is: Should I install this by xrecovery or CWM 4/5?

kliFt said:
Okey. And the last my questions is: Should I install this by xrecovery or CWM 4/5?
Click to expand...
Click to collapse
CWM...
wanna know more about me? click here

SOS…My device does not use Blisspop Rom.Thanks

Because I am a Chinese boy, so my English is not very good. I hope you can forgive
My device is Google NEXUS6 ,can use the CM12, mokee, chroma，but use Blisspop，My device Infinite loop or crash in the second screen.
Tried many times to recover the official ROM,but still the same.
Very, very fond of blisspop ROM,I hope you can help me，Thank you !

Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?

bigstunta101 said:
Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?
Click to expand...
Click to collapse
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition

why continue using blisspop ?? just use a different rom.. a lot of roms is out there

Your bootloader is unlocked right?

bigstunta101 said:
Your bootloader is unlocked right?
Click to expand...
Click to collapse
Thank you for your reply
YES
I see a lock device is turned on in the following {Google} LOGO

reyscott1968 said:
why continue using blisspop ?? just use a different rom.. a lot of roms is out there
Click to expand...
Click to collapse
Thank you for your reply
Currently only see Blisspop Rom has Floating window function
I'm too used to this feature.
Deeply fascinated by it

Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps

jfa2008 said:
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition
Click to expand...
Click to collapse
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk

soupysoup said:
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged

bigstunta101 said:
Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged

jfa2008 said:
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
Click to expand...
Click to collapse
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk

soupysoup said:
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”？

jfa2008 said:
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”？
Click to expand...
Click to collapse
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.

zelendel said:
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.
Click to expand...
Click to collapse
Please forgive me for a long time to reply to you
Because China is not allowed to visit a lot of websites
I re testing, and then tell you the result. Thank you