Because I am a Chinese boy, so my English is not very good. I hope you can forgive
My device is Google NEXUS6 ,can use the CM12, mokee, chroma,but use Blisspop,My device Infinite loop or crash in the second screen.
Tried many times to recover the official ROM,but still the same.
Very, very fond of blisspop ROM,I hope you can help me,Thank you !
Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?
bigstunta101 said:
Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?
Click to expand...
Click to collapse
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition
why continue using blisspop ?? just use a different rom.. a lot of roms is out there
Your bootloader is unlocked right?
bigstunta101 said:
Your bootloader is unlocked right?
Click to expand...
Click to collapse
Thank you for your reply
YES
I see a lock device is turned on in the following {Google} LOGO
reyscott1968 said:
why continue using blisspop ?? just use a different rom.. a lot of roms is out there
Click to expand...
Click to collapse
Thank you for your reply
Currently only see Blisspop Rom has Floating window function
I'm too used to this feature.
Deeply fascinated by it
Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps
jfa2008 said:
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition
Click to expand...
Click to collapse
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
soupysoup said:
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
bigstunta101 said:
Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
jfa2008 said:
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
Click to expand...
Click to collapse
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
soupysoup said:
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”?
jfa2008 said:
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”?
Click to expand...
Click to collapse
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.
zelendel said:
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.
Click to expand...
Click to collapse
Please forgive me for a long time to reply to you
Because China is not allowed to visit a lot of websites
I re testing, and then tell you the result. Thank you
Related
I flash my phone ,ROM is AospGBMOD 0.1,but it can not start by flash finished.
the phone will show CM animation again and again at starting.System cant be worked.
who know where is the problem? please help me and thanks!
------------------------------------
I used CMRecovery flash the ZIP file
and my phone is sprint HeroC,but my Number is ChinaTelecom
and Radio is 2.41.05.02.11 MEID not corresponding ESN,this is a problum?
new_jarry said:
I flash my phone ,ROM is AospGBMOD 0.1,but it can not start by flash finished.
the phone will show CM animation again and again at starting.System cant be worked.
who know where is the problem? please help me and thanks!
------------------------------------
I used CMRecovery flash the ZIP file
and my phone is sprint HeroC,but my Number is ChinaTelecom
and Radio is 2.41.05.02.11 MEID not corresponding ESN,this is a problum?
Click to expand...
Click to collapse
These ROMs are for Sprint, based in the USA. I would say that changes have to be made to have it work with ChinaTelecom.
Also, to get rid of the CM animation, you have to wipe BOOT, DATA, SYSTEM, CACHE from Clockwork 'Partitions' menu.
thanks for your answer,brother #2.
what changes I should do?and what is the based?how I change the based?
thanks again!
sirmx said:
These ROMs are for Sprint, based in the USA. I would say that changes have to be made to have it work with ChinaTelecom.
Also, to get rid of the CM animation, you have to wipe BOOT, DATA, SYSTEM, CACHE from Clockwork 'Partitions' menu.
Click to expand...
Click to collapse
new_jarry said:
thanks for your answer,brother #2.
what changes I should do?and what is the based?how I change the based?
thanks again!
Click to expand...
Click to collapse
Your phone is not sprint, Like sirmx said, this is a ROM for sprint. You have chinatelecom. Every ROM in this forum will be for sprint.
Twolazyg said:
Your phone is not sprint, Like sirmx said, this is a ROM for sprint. You have chinatelecom. Every ROM in this forum will be for sprint.
Click to expand...
Click to collapse
no no,my phone is sprint,I changed the ESN ,imsi and akey only.
in our land no heroC,I buy this phone at USA .
another ROM is used my phone is Okay. e.g. Sprint.STOCK.
aospGB not suport only.Um~~~
new_jarry said:
no no,my phone is sprint,I changed the ESN ,imsi and akey only.
in our land no heroC,I buy this phone at USA .
another ROM is used my phone is Okay. e.g. Sprint.STOCK.
aospGB not suport only.Um~~~
Click to expand...
Click to collapse
Do a full wipe of the phone (system, data, cache, cache partitions, factory data reset) then flash the ROM and Gapps. Then report back
Twolazyg said:
Do a full wipe of the phone (system, data, cache, cache partitions, factory data reset) then flash the ROM and Gapps. Then report back
Click to expand...
Click to collapse
Full wipe I done. but didnt flash Gapps. AospGB cant work without Gapps?
I will try again and report. thanks
new_jarry said:
Full wipe I done. but didnt flash Gapps. AospGB cant work without Gapps?
I will try again and report. thanks
Click to expand...
Click to collapse
It will work without gapps, that's why their separate packages..
Try flashing the newest aosp gb v0.1.2. Link is in my sig
HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD
Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?
still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Can you post call recorder thread link you tried to flash?
Sent with L0VE
baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached
sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE
Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,
sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?
letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India
Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium
i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot
I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium
I have LG optimus Black.
I face this problem a few times and i cannot find a way to solve this problem.
Can someone please HELP me out and advice me.
Whenever i use SMART FLASH, after i install superuser in my phone then Re-booth my phone.
whenever i try to update anything or install anything MY phone will AUTO RE-BOOTH.
can someone please advice?
panda_linger said:
I have LG optimus Black.
I face this problem a few times and i cannot find a way to solve this problem.
Can someone please HELP me out and advice me.
Whenever i use SMART FLASH, after i install superuser in my phone then Re-booth my phone.
whenever i try to update anything or install anything MY phone will AUTO RE-BOOTH.
can someone please advice?
Click to expand...
Click to collapse
Your in the wrong thread.
Use SFT,Clear Data and Cache then goto advanced and clear dalvik. Flash Super User.zip then reboot. If it doesn't work it's time to send it in to the repair shop (after flashing stock ROM ofcourse).
(You have a bit of a lisp there )
Mod can you please move this to the right thread.
I need some more advice.
Is there any other way i can solve this problem?
panda_linger said:
Mod can you please move this to the right thread.
I need some more advice.
Is there any other way i can solve this problem?
Click to expand...
Click to collapse
Theres no other solutiom
Sent from MercurySandwich
SoulExertz said:
Theres no other solutiom
Sent from MercurySandwich
Click to expand...
Click to collapse
what is the parts that need to be replace or repair?
can you please advice?
My phone already run out of warranty.
My place has got no techs that are good in ANDROID phones repair...
so please advice thanks
SoulExertz said:
Theres no other solutiom
Sent from MercurySandwich
Click to expand...
Click to collapse
could it be something to do with my play store?
as after i flash it the version of my play store is version 3.4.
I ever face this problem before.
I remember that time i manage to get it updated to version 3.8 EVERY Thing went fine after that.
But i forgot HOW to get it UPDATE to VERSION 3.8 from version 3.4 (which ALWAYS AUTO-RESTART, whenever i try install anything)
Go to recovery and make a full wipe.
It should be enoguh.
Cheers
SoulExertz said:
Theres no other solutiom
Sent from MercurySandwich
Click to expand...
Click to collapse
RD Test tool...
Zecanilis said:
Go to recovery and make a full wipe.
It should be enoguh.
Cheers
Click to expand...
Click to collapse
thanks i will try and RE-post on the outcome.
panda_linger said:
thanks i will try and RE-post on the outcome.
Anyway your FULL wipe meaning is?
Can you please define thanks?
Click to expand...
Click to collapse
Wipe data, cache, go to advanced, wipe dalwik, done
Recovery -> Wipe Data/factory reset
Has said, factory reset.
Zecanilis said:
Recovery -> Wipe Data/factory reset
Has said, factory reset.
Click to expand...
Click to collapse
You forgot dalvik wipe...
Zecanilis said:
Go to recovery and make a full wipe.
It should be enoguh.
Cheers
Click to expand...
Click to collapse
Steps i did.
1. flash V20s using smart flash
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
6. install superuser
REBOOTH
i went into play store.
Its still at version 3.4.7
when i only updating Gmail after 100% download
PHONE will AUTO RESTART
and AFTER rebooth GMAIL is still not updated!
Im really PUZZLE?????
Please dont give up on my problem
Hope more advice from all kind GUYS out here keeps pouring in
THANKS
1. flash V20s using smart flash
1.1 install superuser
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
If doesn't work TRY:
1. flash V20s using smart flash
1.1 install superuser
REBOOT
After booting...
REBOOT RECOVERY
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
Zecanilis said:
1. flash V20s using smart flash
1.1 install superuser
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
If doesn't work TRY:
1. flash V20s using smart flash
1.1 install superuser
REBOOT
After booting...
REBOOT RECOVERY
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
Click to expand...
Click to collapse
Thaks i will re-post the outcome in 10 mins
Zecanilis said:
1. flash V20s using smart flash
1.1 install superuser
2.i wipe data/factory reset
3. wipe cache
4. wipe dalvik cache
5. wip batt stats
REBOOT
THE METHOD ABOVE WORKS!!!!!!
You are WONDER...
Thanks for not giving up on my problem so fast...
I really appreciate....
THANKS alot
Click to expand...
Click to collapse
Hello and sorry if I asked this on the wrong section.I just made this account hours ago.
Anyway...
I have successfully installed MiniCM9 but unfortunately I have "No Service" problem.
I searched through the web and find out that it might be sim lock or something.
I used "msm7227_semc" to unlock my bootloader so that probably the problem.
So I reset my phone with Sony PC Companion.
I want to reinstall CM9 but It might happen again.
So can someone please guide me through the installation and give me link for file I need because I have no idea if I'm using the right file.
Thank you.
mafiarangers said:
Hello and sorry if I asked this on the wrong section.I just made this account hours ago.
Anyway...
I have successfully installed MiniCM9 but unfortunately I have "No Service" problem.
I searched through the web and find out that it might be sim lock or something.
I used "msm7227_semc" to unlock my bootloader so that probably the problem.
So I reset my phone with Sony PC Companion.
I want to reinstall CM9 but It might happen again.
So can someone please guide me through the installation and give me link for file I need because I have no idea if I'm using the right file.
Thank you.
Click to expand...
Click to collapse
Flash a CLEAN rom..
wipe every damn thing properly!!
WIPE!!!!
goudaniket said:
Flash a CLEAN rom..
wipe every damn thing properly!!
WIPE!!!!
Click to expand...
Click to collapse
My phone is okay.I reset it to original.
I just want to install CM9 properly.
I don't have any problem with my phone.
mafiarangers said:
My phone is okay.I reset it to original.
I just want to install CM9 properly.
I don't have any problem with my phone.
Click to expand...
Click to collapse
Exactly ..
thats what m saying..
FLASH it CLEAN!
as in.,
wipe data/factory reset, wipe cache , dalvik cache
mount and storage..
format /system, /data, / cache
goudaniket said:
Exactly ..
thats what m saying..
FLASH it CLEAN!
as in.,
wipe data/factory reset, wipe cache , dalvik cache
mount and storage..
format /system, /data, / cache
Click to expand...
Click to collapse
Then?
mafiarangers said:
Then?
Click to expand...
Click to collapse
I believe it's on the 1st post of the rom and kernel (the steps).
Here's the short version:
1. Go to recovery
2. Full wipe, cache, etc
3. Flash correct kernel
4. Format system cache data
5. Flash rom
Why ics though?
Hello everyone.
Lately I had this frustrating problem with formatting the cache through any recovery I ever had. ALWAYS!
How flashing a ROM goes:
- I'm powering off the phone and enter in recovery.
- I select Wipe Data/Cache (Or Wipe for a new ROM option in CWM)
- It starts by formatting data and next is cache, where I get stuck.
I don't have many options. I can either pull out the battery or wait a while. Oh, no worries, after 5 minutes of "formatting cache" it reboots, with the current ROM messed, obviously.
It's annoying because no one seems to have this problem and it happens every single time when I wipe.
Hope there is someone who will bother helping me out with this.
P.S. - I'm no expert, more like a noob, so don't ask me too-technical questions.
Thankiees!
switch to latest TWRP
flash stock om once with odin
wipe data and cache with stock recovery once
then install latest TWRP
that fixed it for me when i had that issue
maultasche said:
switch to latest TWRP
Click to expand...
Click to collapse
I had the latest TWRP when I did so. No matter what recovery I use, I always get stuck there.
DrmohamedShawky said:
flash stock om once with odin
wipe data and cache with stock recovery once
then install latest TWRP
that fixed it for me when i had that issue
Click to expand...
Click to collapse
Thanks for your time, I'll try your method and tell you how it goes.
Spooms said:
Thanks for your time, I'll try your method and tell you how it goes.
Click to expand...
Click to collapse
Thanks! Your method did the trick!
Sent from my GT-I9305 using XDA-Developers mobile app