I flash my phone ,ROM is AospGBMOD 0.1,but it can not start by flash finished.
the phone will show CM animation again and again at starting.System cant be worked.
who know where is the problem? please help me and thanks!
------------------------------------
I used CMRecovery flash the ZIP file
and my phone is sprint HeroC,but my Number is ChinaTelecom
and Radio is 2.41.05.02.11 MEID not corresponding ESN,this is a problum?
new_jarry said:
I flash my phone ,ROM is AospGBMOD 0.1,but it can not start by flash finished.
the phone will show CM animation again and again at starting.System cant be worked.
who know where is the problem? please help me and thanks!
------------------------------------
I used CMRecovery flash the ZIP file
and my phone is sprint HeroC,but my Number is ChinaTelecom
and Radio is 2.41.05.02.11 MEID not corresponding ESN,this is a problum?
Click to expand...
Click to collapse
These ROMs are for Sprint, based in the USA. I would say that changes have to be made to have it work with ChinaTelecom.
Also, to get rid of the CM animation, you have to wipe BOOT, DATA, SYSTEM, CACHE from Clockwork 'Partitions' menu.
thanks for your answer,brother #2.
what changes I should do?and what is the based?how I change the based?
thanks again!
sirmx said:
These ROMs are for Sprint, based in the USA. I would say that changes have to be made to have it work with ChinaTelecom.
Also, to get rid of the CM animation, you have to wipe BOOT, DATA, SYSTEM, CACHE from Clockwork 'Partitions' menu.
Click to expand...
Click to collapse
new_jarry said:
thanks for your answer,brother #2.
what changes I should do?and what is the based?how I change the based?
thanks again!
Click to expand...
Click to collapse
Your phone is not sprint, Like sirmx said, this is a ROM for sprint. You have chinatelecom. Every ROM in this forum will be for sprint.
Twolazyg said:
Your phone is not sprint, Like sirmx said, this is a ROM for sprint. You have chinatelecom. Every ROM in this forum will be for sprint.
Click to expand...
Click to collapse
no no,my phone is sprint,I changed the ESN ,imsi and akey only.
in our land no heroC,I buy this phone at USA .
another ROM is used my phone is Okay. e.g. Sprint.STOCK.
aospGB not suport only.Um~~~
new_jarry said:
no no,my phone is sprint,I changed the ESN ,imsi and akey only.
in our land no heroC,I buy this phone at USA .
another ROM is used my phone is Okay. e.g. Sprint.STOCK.
aospGB not suport only.Um~~~
Click to expand...
Click to collapse
Do a full wipe of the phone (system, data, cache, cache partitions, factory data reset) then flash the ROM and Gapps. Then report back
Twolazyg said:
Do a full wipe of the phone (system, data, cache, cache partitions, factory data reset) then flash the ROM and Gapps. Then report back
Click to expand...
Click to collapse
Full wipe I done. but didnt flash Gapps. AospGB cant work without Gapps?
I will try again and report. thanks
new_jarry said:
Full wipe I done. but didnt flash Gapps. AospGB cant work without Gapps?
I will try again and report. thanks
Click to expand...
Click to collapse
It will work without gapps, that's why their separate packages..
Try flashing the newest aosp gb v0.1.2. Link is in my sig
Related
HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD
Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?
still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Can you post call recorder thread link you tried to flash?
Sent with L0VE
baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached
sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE
Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,
sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?
letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India
Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium
i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot
I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium
i was using android revolution HD since 7.1,and 4 days ago i flashed android revolution 10.0 and the the camera app on my phone does not work anymore,i can still open the camera app but it doesnt response and close itself after a few seconds, then i tried the trickdroid 6.0.1,still the same. seems like i am the only on who have this problem, i think maybe i flash it wrong, could you guys help me find out which step i did wrong? and how to fix the camera app. thanks!
Did you flash kernels after you installed the ROMs? Looks like a kernel issue to me.
ArmedandDangerous said:
Did you flash kernels after you installed the ROMs? Looks like a kernel issue to me.
Click to expand...
Click to collapse
No, i didnt, because mike said not to.
KenHu1993 said:
No, i didnt, because mike said not to.
Click to expand...
Click to collapse
try clearing the camera app data
skinsfanbdh said:
try clearing the camera app data
Click to expand...
Click to collapse
tried, still doesn't work,and i also tried factory reset.
KenHu1993 said:
tried, still doesn't work,and i also tried 他和factory reset.
Click to expand...
Click to collapse
might want to try clearing data for gallery also. other than that maybe a bad download bad flash
skinsfanbdh said:
might want to try clearing data for gallery also. other than that maybe a bad download bad flash
Click to expand...
Click to collapse
tried, doesn't work, and i downloaded trickdroid 7.0 and flashed it, even the AOSP camera and QR scanner are not working, do you think it is a hardware problem?
KenHu1993 said:
tried, doesn't work, and i downloaded trickdroid 7.0 and flashed it, even the AOSP camera and QR scanner are not working, do you think it is a hardware problem?
Click to expand...
Click to collapse
i doubt it
did you wipe data,cache,davlik before you flashed
one more thing download rom manager and use the fix permissions script included in the app
I had this problem, But i wiped everything and flashed Android Revo 10 again and it worked again.
skinsfanbdh said:
i doubt it
did you wipe data,cache,davlik before you flashed
one more thing download rom manager and use the fix permissions script included in the app
Click to expand...
Click to collapse
i didn't wipe data,cache,davlik, becasue dont know how, the last time i flash a lot of rom on my phone is 2 years ago, and when i came from stock to android revolution HD i didnt wipe data,cache,davlik before i flash, could you please teach me how and i try flash again. in fact, every app need real facing camera doesn't work now.
in cwm wipe data/factory reset then wipe cache then go to advanced wipe davlik then flash rom then reboot
Peterboi said:
I had this problem, But i wiped everything and flashed Android Revo 10 again and it worked again.
Click to expand...
Click to collapse
in fact i dont know how to wipe everything, all i did is factory before i flash, could 有please teach me how?
skinsfanbdh said:
in cwm wipe data/factory reset then wipe cache then go to advanced wipe davlik then flash rom then reboot
Click to expand...
Click to collapse
it wont wipe my rom rar file? in old days it does..
KenHu1993 said:
it wont wipe my rom rar file? in old days it does..
Click to expand...
Click to collapse
no. it will only wipe user data,app data,and apps you have installed.
but if this is your first time using 4.2 you should backup your sd card to your computer and after you flash the rom and boot up boot back to recovery and wipe your sd card then reboot and restore backup from computer or you will think it wiped everything but it just moves things around for multiuser support
skinsfanbdh said:
no. it will only wipe user data,app data,and apps you have installed.
but if this is your first time using 4.2 you should backup your sd card to your computer and after you flash the rom and boot up boot back to recovery and wipe your sd card then reboot and restore backup from computer or you will think it wiped everything but it just moves things around for multiuser support
Click to expand...
Click to collapse
I just did the wipe data,cache,davlik and flashed again, and tried the rom manger,the camera still doesn't,work. how do i back up SDcard,or should i just delate all the stuff on my phone and only leave the rom rar on my phone and flash it?
what recovery are you using? and is the flash finishing to 100%?
skinsfanbdh said:
what recovery are you using? and is the flash finishing to 100%?
Click to expand...
Click to collapse
i am using CMW and yes, 100%
did you choose aosp camera in aroma? if so try doing it without choosing it
skinsfanbdh said:
did you choose aosp camera in aroma? if so try doing it without choosing it
Click to expand...
Click to collapse
the rom i choosed is android revolution hd,doesn't have that option..
try the stock 4.2 rom mike1986 posted. i was running ARHD 10.1 and camera worked im on trickdroid7.1 now and camera works also
Hello and sorry if I asked this on the wrong section.I just made this account hours ago.
Anyway...
I have successfully installed MiniCM9 but unfortunately I have "No Service" problem.
I searched through the web and find out that it might be sim lock or something.
I used "msm7227_semc" to unlock my bootloader so that probably the problem.
So I reset my phone with Sony PC Companion.
I want to reinstall CM9 but It might happen again.
So can someone please guide me through the installation and give me link for file I need because I have no idea if I'm using the right file.
Thank you.
mafiarangers said:
Hello and sorry if I asked this on the wrong section.I just made this account hours ago.
Anyway...
I have successfully installed MiniCM9 but unfortunately I have "No Service" problem.
I searched through the web and find out that it might be sim lock or something.
I used "msm7227_semc" to unlock my bootloader so that probably the problem.
So I reset my phone with Sony PC Companion.
I want to reinstall CM9 but It might happen again.
So can someone please guide me through the installation and give me link for file I need because I have no idea if I'm using the right file.
Thank you.
Click to expand...
Click to collapse
Flash a CLEAN rom..
wipe every damn thing properly!!
WIPE!!!!
goudaniket said:
Flash a CLEAN rom..
wipe every damn thing properly!!
WIPE!!!!
Click to expand...
Click to collapse
My phone is okay.I reset it to original.
I just want to install CM9 properly.
I don't have any problem with my phone.
mafiarangers said:
My phone is okay.I reset it to original.
I just want to install CM9 properly.
I don't have any problem with my phone.
Click to expand...
Click to collapse
Exactly ..
thats what m saying..
FLASH it CLEAN!
as in.,
wipe data/factory reset, wipe cache , dalvik cache
mount and storage..
format /system, /data, / cache
goudaniket said:
Exactly ..
thats what m saying..
FLASH it CLEAN!
as in.,
wipe data/factory reset, wipe cache , dalvik cache
mount and storage..
format /system, /data, / cache
Click to expand...
Click to collapse
Then?
mafiarangers said:
Then?
Click to expand...
Click to collapse
I believe it's on the 1st post of the rom and kernel (the steps).
Here's the short version:
1. Go to recovery
2. Full wipe, cache, etc
3. Flash correct kernel
4. Format system cache data
5. Flash rom
Why ics though?
I installed both given version of cyanogen mod using proper method but after rebooting into system, bootanimation appears for some time then my z1 restrats. This happens again and again.
I tried various ways like changed the kernel etc. But still no luck.
Have someone any solution???
jobangill99 said:
I installed both given version of cyanogen mod using proper method but after rebooting into system, bootanimation appears for some time then my z1 restrats. This happens again and again.
I tried various ways like changed the kernel etc. But still no luck.
Have someone any solution???
Click to expand...
Click to collapse
Have you cleared cache after installing CM11? Which CM11 did you install? There are some issues with the current FXP versions. Use this one. http://get.cm/get/ecz
Rekoil said:
Have you cleared cache after installing CM11? Which CM11 did you install? There are some issues with the current FXP versions. Use this one. http://get.cm/get/ecz
Click to expand...
Click to collapse
Yes I tried. Different versions like fxp 302, 301, from fxp source and from get.cm but did not find what the problem is
jobangill99 said:
Yes I tried. Different versions like fxp 302, 301, from fxp source and from get.cm but did not find what the problem is
Click to expand...
Click to collapse
Install the boot partition from this zip, load up recovery, flash the zip, clear cache, reboot. Done. (you might want to install GApps there somewhere as well)
Tried wiping data too?
Sent from my C6903 using Tapatalk
Rekoil said:
Install the boot partition from this zip, load up recovery, flash the zip, clear cache, reboot. Done. (you might want to install GApps there somewhere as well)
Click to expand...
Click to collapse
Did what you said. now stuck at boot animation waited for 5minutes but nothing was happened. Is it normal? And what cache to wipe? I wiped both dalvik And cache partition
tomascus said:
Tried wiping data too?
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
You mean all internal storage including media?
I Did factory reset
jobangill99 said:
You mean all internal storage including media?
I Did factory reset
Click to expand...
Click to collapse
If you've just unlocked the bootloader and never booted a Sony ROM after the fact then you'll not be able to do a simple factory reset, but will need to do a full /data and /data/media (/sdcard) format. So do that first, then flash the zip(s), and then it should boot fine.
wiped full internal storage also tried relock and again unlocked the bootloader but still stuck at bootanmation,
also slimkat and slimbean roam won't boot up but ihackers working fine.....strange
jobangill99 said:
wiped full internal storage also tried relock and again unlocked the bootloader but still stuck at bootanmation,
also slimkat and slimbean roam won't boot up but ihackers working fine.....strange
Click to expand...
Click to collapse
Something is wrong with your phone in that case... Either that or you're doing something wrong.
Sent from my Xperia Z1
Because I am a Chinese boy, so my English is not very good. I hope you can forgive
My device is Google NEXUS6 ,can use the CM12, mokee, chroma,but use Blisspop,My device Infinite loop or crash in the second screen.
Tried many times to recover the official ROM,but still the same.
Very, very fond of blisspop ROM,I hope you can help me,Thank you !
Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?
bigstunta101 said:
Which gapps are you using? Have you tried flashing just bliss pop, boot into ROM, then go back into recovery and flash gapps?
Click to expand...
Click to collapse
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition
why continue using blisspop ?? just use a different rom.. a lot of roms is out there
Your bootloader is unlocked right?
bigstunta101 said:
Your bootloader is unlocked right?
Click to expand...
Click to collapse
Thank you for your reply
YES
I see a lock device is turned on in the following {Google} LOGO
reyscott1968 said:
why continue using blisspop ?? just use a different rom.. a lot of roms is out there
Click to expand...
Click to collapse
Thank you for your reply
Currently only see Blisspop Rom has Floating window function
I'm too used to this feature.
Deeply fascinated by it
Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps
jfa2008 said:
Thank you for your reply
As mainland China can not use Google, so I did not flash gapps.
My steps are:
1. Restore official factory firmware (5.0 or 5.1)
2. NRT 2.4 Get ROOT
3. Obtain REC
4.flash Blisspop Rom
5.wipe data / factory reset, wipe cache partition
Click to expand...
Click to collapse
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
soupysoup said:
U can't wipe data, system AFTER u flash, u need to wipe the device, then flash the rom, then boot the rom, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
bigstunta101 said:
Next time you flash the ROM, wipe dalvik, and cache before you reboot the device into the system and see if that helps
Click to expand...
Click to collapse
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
jfa2008 said:
Thank you for your reply
I have tried not wipe system, but the situation is still unchanged
Click to expand...
Click to collapse
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
soupysoup said:
Yes but if u wipe AFTER flashing, this will always happen, what u need to do is this,
Download rom
Boot to recovery,
Wipe system, data, cache, dalvik cache
Flash rom
Boot
That's it, don't wipe after flashing
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”?
jfa2008 said:
Thank you for your reply
Please forgive my English is not very good, so you may not be able to fully understand your meaning.
I tried Wipe system, data, cache, dalvik cache
And then Flash rom
But it is still a problem.
But you say——“don't wipe after flashing”?
Click to expand...
Click to collapse
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.
zelendel said:
No dont wipe after flashing.
Also grab a logcat as that will help find the issue.
Click to expand...
Click to collapse
Please forgive me for a long time to reply to you
Because China is not allowed to visit a lot of websites
I re testing, and then tell you the result. Thank you