cyanogen mod 10.2 and 11 problem - Xperia Z1 Q&A, Help & Troubleshooting

I installed both given version of cyanogen mod using proper method but after rebooting into system, bootanimation appears for some time then my z1 restrats. This happens again and again.
I tried various ways like changed the kernel etc. But still no luck.
Have someone any solution???

jobangill99 said:
I installed both given version of cyanogen mod using proper method but after rebooting into system, bootanimation appears for some time then my z1 restrats. This happens again and again.
I tried various ways like changed the kernel etc. But still no luck.
Have someone any solution???
Click to expand...
Click to collapse
Have you cleared cache after installing CM11? Which CM11 did you install? There are some issues with the current FXP versions. Use this one. http://get.cm/get/ecz

Rekoil said:
Have you cleared cache after installing CM11? Which CM11 did you install? There are some issues with the current FXP versions. Use this one. http://get.cm/get/ecz
Click to expand...
Click to collapse
Yes I tried. Different versions like fxp 302, 301, from fxp source and from get.cm but did not find what the problem is

jobangill99 said:
Yes I tried. Different versions like fxp 302, 301, from fxp source and from get.cm but did not find what the problem is
Click to expand...
Click to collapse
Install the boot partition from this zip, load up recovery, flash the zip, clear cache, reboot. Done. (you might want to install GApps there somewhere as well)

Tried wiping data too?
Sent from my C6903 using Tapatalk

Rekoil said:
Install the boot partition from this zip, load up recovery, flash the zip, clear cache, reboot. Done. (you might want to install GApps there somewhere as well)
Click to expand...
Click to collapse
Did what you said. now stuck at boot animation waited for 5minutes but nothing was happened. Is it normal? And what cache to wipe? I wiped both dalvik And cache partition

tomascus said:
Tried wiping data too?
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
You mean all internal storage including media?
I Did factory reset

jobangill99 said:
You mean all internal storage including media?
I Did factory reset
Click to expand...
Click to collapse
If you've just unlocked the bootloader and never booted a Sony ROM after the fact then you'll not be able to do a simple factory reset, but will need to do a full /data and /data/media (/sdcard) format. So do that first, then flash the zip(s), and then it should boot fine.

wiped full internal storage also tried relock and again unlocked the bootloader but still stuck at bootanmation,
also slimkat and slimbean roam won't boot up but ihackers working fine.....strange

jobangill99 said:
wiped full internal storage also tried relock and again unlocked the bootloader but still stuck at bootanmation,
also slimkat and slimbean roam won't boot up but ihackers working fine.....strange
Click to expand...
Click to collapse
Something is wrong with your phone in that case... Either that or you're doing something wrong.
Sent from my Xperia Z1

Related

[Q] international HTC one 4.2.2 camera doesn't work.

i was using android revolution HD since 7.1,and 4 days ago i flashed android revolution 10.0 and the the camera app on my phone does not work anymore,i can still open the camera app but it doesnt response and close itself after a few seconds, then i tried the trickdroid 6.0.1,still the same. seems like i am the only on who have this problem, i think maybe i flash it wrong, could you guys help me find out which step i did wrong? and how to fix the camera app. thanks!
Did you flash kernels after you installed the ROMs? Looks like a kernel issue to me.
ArmedandDangerous said:
Did you flash kernels after you installed the ROMs? Looks like a kernel issue to me.
Click to expand...
Click to collapse
No, i didnt, because mike said not to.
KenHu1993 said:
No, i didnt, because mike said not to.
Click to expand...
Click to collapse
try clearing the camera app data
skinsfanbdh said:
try clearing the camera app data
Click to expand...
Click to collapse
tried, still doesn't work,and i also tried factory reset.
KenHu1993 said:
tried, still doesn't work,and i also tried 他和factory reset.
Click to expand...
Click to collapse
might want to try clearing data for gallery also. other than that maybe a bad download bad flash
skinsfanbdh said:
might want to try clearing data for gallery also. other than that maybe a bad download bad flash
Click to expand...
Click to collapse
tried, doesn't work, and i downloaded trickdroid 7.0 and flashed it, even the AOSP camera and QR scanner are not working, do you think it is a hardware problem?
KenHu1993 said:
tried, doesn't work, and i downloaded trickdroid 7.0 and flashed it, even the AOSP camera and QR scanner are not working, do you think it is a hardware problem?
Click to expand...
Click to collapse
i doubt it
did you wipe data,cache,davlik before you flashed
one more thing download rom manager and use the fix permissions script included in the app
I had this problem, But i wiped everything and flashed Android Revo 10 again and it worked again.
skinsfanbdh said:
i doubt it
did you wipe data,cache,davlik before you flashed
one more thing download rom manager and use the fix permissions script included in the app
Click to expand...
Click to collapse
i didn't wipe data,cache,davlik, becasue dont know how, the last time i flash a lot of rom on my phone is 2 years ago, and when i came from stock to android revolution HD i didnt wipe data,cache,davlik before i flash, could you please teach me how and i try flash again. in fact, every app need real facing camera doesn't work now.
in cwm wipe data/factory reset then wipe cache then go to advanced wipe davlik then flash rom then reboot
Peterboi said:
I had this problem, But i wiped everything and flashed Android Revo 10 again and it worked again.
Click to expand...
Click to collapse
in fact i dont know how to wipe everything, all i did is factory before i flash, could 有please teach me how?
skinsfanbdh said:
in cwm wipe data/factory reset then wipe cache then go to advanced wipe davlik then flash rom then reboot
Click to expand...
Click to collapse
it wont wipe my rom rar file? in old days it does..
KenHu1993 said:
it wont wipe my rom rar file? in old days it does..
Click to expand...
Click to collapse
no. it will only wipe user data,app data,and apps you have installed.
but if this is your first time using 4.2 you should backup your sd card to your computer and after you flash the rom and boot up boot back to recovery and wipe your sd card then reboot and restore backup from computer or you will think it wiped everything but it just moves things around for multiuser support
skinsfanbdh said:
no. it will only wipe user data,app data,and apps you have installed.
but if this is your first time using 4.2 you should backup your sd card to your computer and after you flash the rom and boot up boot back to recovery and wipe your sd card then reboot and restore backup from computer or you will think it wiped everything but it just moves things around for multiuser support
Click to expand...
Click to collapse
I just did the wipe data,cache,davlik and flashed again, and tried the rom manger,the camera still doesn't,work. how do i back up SDcard,or should i just delate all the stuff on my phone and only leave the rom rar on my phone and flash it?
what recovery are you using? and is the flash finishing to 100%?
skinsfanbdh said:
what recovery are you using? and is the flash finishing to 100%?
Click to expand...
Click to collapse
i am using CMW and yes, 100%
did you choose aosp camera in aroma? if so try doing it without choosing it
skinsfanbdh said:
did you choose aosp camera in aroma? if so try doing it without choosing it
Click to expand...
Click to collapse
the rom i choosed is android revolution hd,doesn't have that option..
try the stock 4.2 rom mike1986 posted. i was running ARHD 10.1 and camera worked im on trickdroid7.1 now and camera works also

[Q] LiteCM 10 wont boot!?

i followed the instructions, flashes the kernel, install from zipcard.. and so on (im not a noob) but it wont load.. im stuck at Google animation.
I tried reinstalling, deleting cache, dalvic and so on.. but i cant get it to boot!!
anyone having the same issue??
pls respond.:crying:
do you have format /system /data and /cache?
Flash the kernel again.
Format /system,data,cache
Do factory reset/wipe data
Wipe cache partition, and dalvik cache.
After this flash the rom. :thumbup:
cdeox8 said:
Format /system,data,cache
Flash the kernel again.
Do factory reset/wipe data
Wipe cache partition, and dalvik cache.
After this flash the rom. :thumbup:
Click to expand...
Click to collapse
That should be enough.
Oh and make sure the ROM installs properly i.e. it's not a bad download.
JB
Having the same issue but it's bootlooping at nAa kernel logo, please help, i followed the instructions correctly, tried the solutions you posted, but still no luck...
It shouldn't bootloop at the kernel logo. If the ROM isn't installed properly, it should boot into CWM. Try reflashing kernel and ROM.
Alchemist32 said:
Having the same issue but it's bootlooping at nAa kernel logo, please help, i followed the instructions correctly, tried the solutions you posted, but still no luck...
Click to expand...
Click to collapse
are you using the correct kernel? it shouldn't bootloop. like sgt.meow said it should go to cwm if anything's wrong.
Seems like my phone doesn't accept any custom ROM, i tried flashing GingerCMX with Alps (wiped everything before doing that), tried reflashing kernel, roms, several times and its just not working, my xperia x8 is xxx29 (the sticker under the battery), rooted, unlocked BL and no luck... :'(
Alchemist32 said:
Seems like my phone doesn't accept any custom ROM, i tried flashing GingerCMX with Alps (wiped everything before doing that), tried reflashing kernel, roms, several times and its just not working, my xperia x8 is xxx29 (the sticker under the battery), rooted, unlocked BL and no luck... :'(
Click to expand...
Click to collapse
Did u flash the LibSensor patch?
Sent from my GT-I9100 using xda premium
Titan9119 said:
Did u flash the LibSensor patch?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
that's not really required.
cascabel said:
that's not really required.
Click to expand...
Click to collapse
For Alfs, yes.
Sent from my GT-I9100 using xda premium
Titan9119 said:
For Alfs, yes.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i've used alfs for a couple of roms without that patch. no bootloops or any major bug.
@Titan9119
That libsensor patch is something required at ROM level i.e. after the device has booted up. And even without it, the device would be functional like @cascabel said.
I have the same problem.
I have kernel 2.0.32.61-nAa-06. I cleared the caches as required, flashed the kernel through flashtool and then flashed [ROM] | LiteCM10 | v1.0 | 09/07/2013 | JB 4.1.2 | nAa-06-kernel.
After flashing, I did a system reboot. The phone starts with the nAa kernel logo and then blacks out only to restart on the same. I've left it for a while and it keeps up the exercise. I can initiate the recovery with the back button. But nothing I've done has made a difference. Including repeated flashing.
There were no errors during the installations.
If anyone can help, I'd be most grateful.
aahd81 said:
I have the same problem.
I have kernel 2.0.32.61-nAa-06. I cleared the caches as required, flashed the kernel through flashtool and then flashed [ROM] | LiteCM10 | v1.0 | 09/07/2013 | JB 4.1.2 | nAa-06-kernel.
After flashing, I did a system reboot. The phone starts with the nAa kernel logo and then blacks out only to restart on the same. I've left it for a while and it keeps up the exercise. I can initiate the recovery with the back button. But nothing I've done has made a difference. Including repeated flashing.
There were no errors during the installations.
If anyone can help, I'd be most grateful.
Click to expand...
Click to collapse
full wipe, format data cache and system. flash rom.
cascabel said:
full wipe, format data cache and system. flash rom.
Click to expand...
Click to collapse
Already did that multiple times through the recovery mode. Wipes were completed without errors. The only thing I've not wiped is the SD Card.
aahd81 said:
Already did that multiple times through the recovery mode. Wipes were completed without errors. The only thing I've not wiped is the SD Card.
Click to expand...
Click to collapse
did you format the partitions i mentioned as well? if you did, try reflashing the kernel and rom after redownloading. might be a bad flash even if it looks like nothing went wrong.
No luck
You should go to minicm10 FAQ and look under 19 part.
Sent from my E15i running minicm7
cascabel said:
did you format the partitions i mentioned as well? if you did, try reflashing the kernel and rom after redownloading. might be a bad flash even if it looks like nothing went wrong.
Click to expand...
Click to collapse
I did the formats as well as the wipes. Downloaded the ROM and the kernel again and re-flashed. Now its getting stuck on the kernel after a vibration. Sometimes the mauve coloured light comes on and stays, at other reboots it turns off.. Can't get it into the recovery anymore
---------- Post added at 07:48 AM ---------- Previous post was at 07:31 AM ----------
Lukenda said:
You should go to minicm10 FAQ and look under 19 part.
Sent from my E15i running minicm7
Click to expand...
Click to collapse
Originally Posted by matmutant View Post
change in rom zip to *.61 for kernel version if you want the installation to complete (in META-INF/com/google/android/updater-script)
Click to expand...
Click to collapse
I did read this, and a lot of other posts, before posting. Unfortunately, I don't understand what he is asking me to do there. Which file/filename is being edited?

[RECOVERY] CWM based recovery 6.0.5.1.4

UNOFFICIAL CWM 6.0.5.1.4 recovery for Motorola Razr I (SMI/XT890)
A working CWM recovery 6.0.5.1.4 from source (non-touch).
I am not responsible for anything that happens, make sure u always have a backup on the external sd and on your pc!
Download the zip file, extract and flash through fastboot or what ever way u like.
Notes:
Increased overall performance
Credits:
Cyanogenmod
Turl1
Hazou
XDA:DevDB Information
CWM based recovery 6.0.5.1.4, Tool/Utility for the Motorola RAZR i
Contributors
Hazou
Version Information
Status: Stable
Current Stable Version: 6.0.5.1.4
Stable Release Date: 2015-01-20
Created 2015-01-03
Last Updated 2015-01-20
Could be a bug or a one-time thing, it stopped when doing wipe data/factory reset, rebooted and it seems it did it anyways, but wanted to flash a rom xD. TWRP one is working perfectly tough, even with format system
Went to format cache and it seem cwm has just frozen, any ideas on how to reboot?
Volume down + power got it to reboot, but now stuck in bootloop
CWM corrupted the cache I think but fixed it via fastboop
mcpaddington said:
Went to format cache and it seem cwm has just frozen, any ideas on how to reboot?
Volume down + power got it to reboot, but now stuck in bootloop
CWM corrupted the cache I think but fixed it via fastboop
Click to expand...
Click to collapse
hmm, didn't thing cwm will have errors with this. It is build with the same options turl had build his.
I will remove the download for now. We already have 2 problems.
Edit:
Recompiled the recovery. everything is working on my phone. need some testers
I'll test it soon! Can't say i like it better than twrp thou
Hazou said:
hmm, didn't thing cwm will have errors with this. It is build with the same options turl had build his.
I will remove the download for now. We already have 2 problems.
Edit:
Recompiled the recovery. everything is working on my phone. need some testers
Click to expand...
Click to collapse
Still problems with wiping cache. On the recoveries boot it says "Warning: No file_contexts". Stuck on formatting /cache.
It finishes formatting the cache but doesn't give an update to tell us it's complete.
mcpaddington said:
Still problems with wiping cache. On the recoveries boot it says "Warning: No file_contexts". Stuck on formatting /cache.
It finishes formatting the cache but doesn't give an update to tell us it's complete.
Click to expand...
Click to collapse
ok, the warning can be forgotten. it is not a problem
Formatting cache takes some time. i have investigated it a bit. As far as i can see everything goes fine. It just takes some time and doesnt give u the complete sentence.
Hazou said:
ok, the warning can be forgotten. it is not a problem
Formatting cache takes some time. i have investigated it a bit. As far as i can see everything goes fine. It just takes some time and doesnt give u the complete sentence.
Click to expand...
Click to collapse
For me error mounting system when i would like to flash Omar ROM now i'm with a razr I stop working i don't know why but i try to return to old CWM if i can :crying:
EDIT : Flash old CWM with my SD Card i'm happy go back to a working Razr I ... I don't know where is the problem but seem last CWM or other for SMI is to buggy
unable to flash omar 20-09-2013, update started, but never ended (waiting more than 15 minutes...)
so hard power off and flashing other recovery by flashboot...
double post ...
New version, someone want to try it for me?
Hazou said:
New version, someone want to try it for me?
Click to expand...
Click to collapse
Sure
edit: just stays at 'flashing recovery...'
edit2: installed, testing my rom now
anerik said:
Sure
edit: just stays at 'flashing recovery...'
Click to expand...
Click to collapse
really? how is that possible?
Hazou said:
really? how is that possible?
Click to expand...
Click to collapse
read the edit, flashed succesfully, testing now
anerik said:
read the edit, flashed succesfully, testing now
Click to expand...
Click to collapse
Pfew,
Can u test installing your ROM with and without the format line? If u have the time offcourse
Sent from my XT890 using xda app-developers app
just freezes at wipe data, cant format system either, freezes too
anerik said:
just freezes at wipe data, cant format system either, freezes too
Click to expand...
Click to collapse
Even when u wait a little longer?
It doesn't freeze on my phone, it just takes sometimes a little while to get the job done.
Hazou said:
Even when u wait a little longer?
It doesn't freeze on my phone, it just takes sometimes a little while to get the job done.
Click to expand...
Click to collapse
ohh it could be that, i might've waited like 10 secs on the wipe data but less than 5 in the format system
Problem
I just flashed the recovery after using TWRP for a long time and when I tried to wipe the cache the phone froze. I had to manually reset it. I had waited more than 5 minutes and it wouldn't unfreeze. I want to flash Omar roms and i understand i need this recovery, but cant flsh it, any help?
rodrigoauditore said:
I just flashed the recovery after using TWRP for a long time and when I tried to wipe the cache the phone froze. I had to manually reset it. I had waited more than 5 minutes and it wouldn't unfreeze. I want to flash Omar roms and i understand i need this recovery, but cant flsh it, any help?
Click to expand...
Click to collapse
U can use both recovery's to install omars rom. The problem about the long cache wiping is different for each person. Some don't have any problem at all and some do have problems with it. Sometimes it takes a couple of minutes sometimes it wipes in 3 seconds. I dunno why it happens, but when android 4.4 is out with the new kernel i will definitely have another look into it.

N7000 stuck at boot screen

This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps
panamera2011 said:
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps
Click to expand...
Click to collapse
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.
bfürbanane said:
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.
Click to expand...
Click to collapse
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk
panamera2011 said:
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk
Click to expand...
Click to collapse
Where does it say to install SuperSU? How would that be possible when Android is not booting.
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
I'm sorry but it's really strange, never had installation issues with any version of this rom
Have you tried this kernel to install the rom?
https://www.androidfilehost.com/?fid=24052804347829437
Sent from my H60-L02 using Tapatalk
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Sorry but I confused the message with the MIUI 6.2.12 thread [emoji16]
Sent from my H60-L02 using Tapatalk
AutumQueen92 said:
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.
Click to expand...
Click to collapse
I tried that. I went to samsung-updates.com and downloaded a version that I believe is compatible with my baseband version. Is there any way to check what baseband version my phone has? Then I flashed with odin and was stuck in a bootloop. I then flashed PhilZ recovery and the boot hangs at the samsung logo.
bfürbanane said:
Is there any way to check what baseband version my phone has?
Click to expand...
Click to collapse
Settings>about phone>
IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
The phone is not booting.
IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
Doh! sorry not reading what's in front of me. I did once read that you can get phone number via ADB, maybe the same will work for baseband?
bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..
N00b... said:
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..
Click to expand...
Click to collapse
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.
bfürbanane said:
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.
Click to expand...
Click to collapse
I think i got same problem as you do. Im digging on internet , if i get something ill write here.
Condox18 said:
I think i got same problem as you do. Im digging on internet , if i get something ill write here.
Click to expand...
Click to collapse
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.
same problem
bfürbanane said:
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.
Click to expand...
Click to collapse
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.
Condox18 said:
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.
Click to expand...
Click to collapse
Thanks for the pointer. I subscribed myself to that thread.

How to go back Stock ROM from CM?

How to back from Cyanogenmod to MIUI official global ROM?
Any help?
Factory wipe and flash recovery image of MIUI in TWRP.
I'm surprised this is asked considering you have more posts and have been here longer than me.
Expliciate said:
Factory wipe and flash recovery image of MIUI in TWRP.
I'm surprised this is asked considering you have more posts and have been here longer than me.
Click to expand...
Click to collapse
Could you explain exaclty what to do, because if I do wipes (cache data dalvik system) and then install miui, it doesn't work and I have no SO installed message.
giardux91 said:
Could you explain exaclty what to do, because if I do wipes (cache data dalvik system) and then install miui, it doesn't work and I have no SO installed message.
Click to expand...
Click to collapse
What exactly are you using when "install miui" ?
brambizimski said:
What exactly are you using when "install miui" ?
Click to expand...
Click to collapse
Flash the zip of miui rom (eu rom in my case) via twrp
giardux91 said:
Flash the zip of miui rom (eu rom in my case) via twrp
Click to expand...
Click to collapse
Which zip? And did you use encryption with CM ?
brambizimski said:
Which zip? And did you use encryption with CM ?
Click to expand...
Click to collapse
I install the xiaomi eu rom, like cm rom. Wiping and flashing
giardux91 said:
I install the xiaomi eu rom, like cm rom. Wiping and flashing
Click to expand...
Click to collapse
If you have encryption enabled, you have to wipe EVERYTHING, including internal storage.
brambizimski said:
If you have encryption enabled, you have to wipe EVERYTHING, including internal storage, i recommend twrp.
Click to expand...
Click to collapse
But if I wipe internal storage, I'll lose the rom..how to do?
giardux91 said:
But if I wipe internal storage, I'll lose the rom..how to do?
Click to expand...
Click to collapse
Sorry didn't read the part where you said you got a "No OS installed" message, so you were already able to completely remove cm.
It sounds more like you're using the wrong zip or something, maybe try redownloading the zip ?
brambizimski said:
Sorry didn't read the part where you said you got a "No OS installed" message, so you were already able to completely remove cm.
It sounds more like you're using the wrong zip or something, maybe try redownloading the zip ?
Click to expand...
Click to collapse
Tried with different versions of miui but no luck
Trying unmounting the /system partition before you flash it. Solved it for me anyway.
brambizimski said:
Sorry didn't read the part where you said you got a "No OS installed" message, so you were already able to completely remove cm.
It sounds more like you're using the wrong zip or something, maybe try redownloading the zip ?
Click to expand...
Click to collapse
That's what happens when you wipe system. The issue seems to be that he does not know how to get the ROM zip into internal storage after messing with TWRP wipe.
giardux91 said:
Tried with different versions of miui but no luck
Click to expand...
Click to collapse
You might as well just manually wipe data, system and cache in the advanced menu.
Reboot back into TWRP and drag the file into your internal storage to flash. Or you can just adb sideload the rom.
If you're trying to put your ROM in via booting up android, it's not going to work because you've already wiped the system, hence no OS.
Expliciate said:
That's what happens when you wipe system. The issue seems to be that he does not know how to get the ROM zip into internal storage after messing with TWRP wipe.
You might as well just manually wipe data, system and cache in the advanced menu.
Reboot back into TWRP and drag the file into your internal storage to flash. Or you can just adb sideload the rom.
If you're trying to put your ROM in via booting up android, it's not going to work because you've already wiped the system, hence no OS.
Click to expand...
Click to collapse
So, how can I put the rom via USB in twrp?
giardux91 said:
So, how can I put the rom via USB in twrp?
Click to expand...
Click to collapse
It should mount usb by default, at least for me.
If not, go to mount -> mount USB storage to manually mount it.
Expliciate said:
That's what happens when you wipe system. The issue seems to be that he does not know how to get the ROM zip into internal storage after messing with TWRP wipe.
Click to expand...
Click to collapse
I used to have a problem with encryption on a MIUI rom, and no matter what I did, flashing only system or anything other than a full wipe including internal storage didn't do anything. Thought he had the same problem
brambizimski said:
I used to have a problem with encryption on a MIUI rom, and no matter what I did, flashing only system or anything other than a full wipe including internal storage didn't do anything. Thought he had the same problem
Click to expand...
Click to collapse
He does have the same problem. However his dilemma now after doing a full wipe is that he does not know how to put stuff in his internal storage without booting into system.

Categories

Resources