Database Develop

X8 Stuck in Bootloop After Installing Zaraki

As it says above, I just installed GingerZaraki on my X8 and now it's stuck in a bootloop on the Alfs-8 kernel logo screen. I've tried reinstalling Zaraki from the CWM recovery menu to no avail.

You didn't follow the instructions!
Here:
Instructions :
1. Download the ROM
2. Place in in your SD Card
3. Flash alfs v08a/v09a for CM7 (v08a recommended)
4. Reboot into CWM, full wipe, wipe cache, wipe dalvik cache and wipe battery stats
5. Flash the ROM
6. Reboot and enjoy
Click to expand...
Click to collapse

Chris95X8 said:
You didn't follow the instructions!
Here:
Click to expand...
Click to collapse
I just tried again by following the instructions, still the same problem. I even tried flashing the kernel again using flashtool. Not sure what I'm doing wrong.
I've got alfs 8a installed.

Help!

Remove SD card on first boot then after it's completely booted, insert the SD... Reboot... It works.
Sent from my E15i using Tapatalk 2

Tried that. Still not working.:crying:

Have you tried formatting the everything /system /data /cache /sdext after flashing Alfs-v08 before installing GZR?
Sent from my E15i using Tapatalk 2

Lily48 said:
Have you tried formatting the everything /system /data /cache /sdext after flashing Alfs-v08 before installing GZR?
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
Yes, just tried everything again, still stuck on boot loop. It get's to the kernel screen and stops, then after a while the green LED blinks and it restarts and then it carries on with the same thing again and again.
EDIT: Haven't tried formatting /system yet, will try it now.
EDIT 2: That hasn't worked either.

Imy95 said:
Yes, just tried everything again, still stuck on boot loop. It get's to the kernel screen and stops, then after a while the green LED blinks and it restarts and then it carries on with the same thing again and again.
EDIT: Haven't tried formatting /system yet, will try it now.
EDIT 2: That hasn't worked either.
Click to expand...
Click to collapse
Download the kernel(Alfs v08a CM7) and the latest GZR again.After that,follow the instruction to install the ROM in GZR thread.
Sent from my Galaxy Nexus

Imy95 said:
Yes, just tried everything again, still stuck on boot loop. It get's to the kernel screen and stops, then after a while the green LED blinks and it restarts and then it carries on with the same thing again and again.
EDIT: Haven't tried formatting /system yet, will try it now.
EDIT 2: That hasn't worked either.
Click to expand...
Click to collapse
the same for me...tryed to install v08 -> bootloop, tryed to install v06 -> bootloop, reflashed kernel -> bootloop, flashed nAa-14 and v06 -> booted, but laggy/stuck in setup-wizard, flashed alfs 08a ->bootloop...
so i've gone back to GDX...

I think I've found the solution here:
http://forum.xda-developers.com/showthread.php?t=1345902&page=3
So I hope it'll work now.

Woohoooo!!! I was finally able to install GingerZaraki after trying from scratch. I had to install stock ROM again, 015 baseband again, CWM recovery using X8 toolbox, alfs v8a kernel and then GingerZaraki, making sure to follow the instructions in the ROM's thread carefully. Thanks to everyone for their help.

[Q] Stuck at kernel logo. Nothing is working.

Good afternoon,
I'm sorry i'm creating a new thread about an old subject, but i just can't get my X8 to work with custom kernel+rom. I've searched the forum for the same issue but none of the solutions described worked. Until this moment i had to use PCC to flash my smartphone back to normal about 10 times and it's starting to get very annoying. I've followed the devs instructions on all procedures thoroughly, rooting, bootlader unlock, flashing kernel and installing ROM, and it always gets stuck on the kernel logo wether is it before or after flashing the rom (unless i press the back button). To this moment, i've tried nAa-14 and alfs v09 kernel, GingerDX and Zaraki roms, followed guides step by step. I'm a newbie in the smartphones area but not when it comes to computers. Throughout my 'voyage' i had a number of bumps i had to overcome, like having the installation aborted (bad) error when trying to install a rom, which i solved by downloading the zip directly to the SDcard like described here in the forums. GGdrivers are installed, and so are the SE USB drivers, phone is recognized by PCC with no problems.
I honestly have no idea what might be wrong, and as i said, i've done a search before creating a new thread but nothing helped, or maybe i'm just missing a tiny detail. I would really like the help since this is my first smartphone and i would like to play with my new toy!
Thanks and sorry for any inconvenience.
EDIT: I forgot something. In the kernel installation guide is requested that after flashing it, to check in the phone settings if everything is ok. I can't even boot the phone after flashing the kernel (gets stuck on kernel logo) which means my problem is related to something previous to it? Maybe bootlock? I'm pretty sure i'm doing what's required.

Appreciate the fast answer.
I get stuck on the logo wether is it before or after flashing the rom. The only way i don't get stuck is to press the back button to boot into cwm.
Yes i've tried to wipe after and before, and it didn't work. And these were the only roms and kernels i've tried.
There's no problem with hardbricking my device by the way, 11w03.
I'll have to get out for a while, but i will come back later to check all the answers, this is a priority for me at the moment

emaz1ng said:
Appreciate the fast answer.
I get stuck on the logo wether is it before or after flashing the rom. The only way i don't get stuck is to press the back button to boot into cwm.
Yes i've tried to wipe after and before, and it didn't work. And these were the only roms and kernels i've tried.
There's no problem with hardbricking my device by the way, 11w03.
I'll have to get out for a while, but i will come back later to check all the answers, this is a priority for me at the moment
Click to expand...
Click to collapse
Don't full wipe two times,either before or after,you can see this at the rom thread.
One basic detail that many forget is that you must have baseband that lasts to 15,so it would be like this xxx015
Sent from my X8 using xda premium

I didnt full wipe when trying gingerdx, as you said its not requested, only wiped with zaraki. I can confirm my baseband is xxxx015.
Sent from my E15i using xda app-developers app

emaz1ng said:
I didnt full wipe when trying gingerdx, as you said its not requested, only wiped with zaraki. I can confirm my baseband is xxxx015.
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
You have to full wipe,don't full wipe two times,gingerdx needs full wipe before installing the rom....
Sent from my X8 using xda premium

I tried again using the correct wiping method for gingerdx and it still freezes on kernel logo. the weird thing is that it freezes the first time it boots after flashing the kernel, meaning it has nothing to do with the rom, right? and maybe even not related to the kernel itself. i'm completely clueless about this, i wish i had a friend who could do it for me, because i can't detect anything done wrong.

What version of cwm are you using?
Sent from my X8 using xda premium

i'm not quite sure what's the version of cwm since it installs itself along with nAa-14 kernel, but i think it was v5.0.2.8
IAmNice said:
I think its the cwm that comes with the kernel.
For the OP. No idea what to do. You have a weird problem
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
please don't destroy my hopes of having a working custom rom on my phone jokes aside, i get your point, but doesn't it seem not logical that i'm the only one who can't get it to work? it's weird enough i can't boot my phone after flashing the kernel....

i could post a video, sure, but it's pretty straightforward. after i flash the kernel, unplug the phone from PC and boot it up, IF i don't boot into cwm, it will freeze on the kernel logo, making it impossible to even check the phone settings as requested in gingerdx thread. AFTER i install the rom and reboot the phone, it will still show the kernel logo and freeze again (if i understand correctly this is not supposed to happen, what's supposed to show on the screen after the rom is installed are the normal SE logos.)
So, summing up. Flash kernel, turn phone on, freezes on kernel logo if i don't use back button to go into cwm. If i enter cwm, install rom from sdcard, reboot, it shows the kernel logo and freezes if i don't use back button again.
Don't know if it helps but the only way to turn the phone off when it freezes is removing the battery. Sometimes after placing the battery again it will automatically turn on.

Dunno what's wrong,why don't you try with stock kernel and gdx,or why don't you try different rom(yea neither gdx nor gzr)
Sent from my X8 using xda premium

you mean formatting partitions after flashing the kernel or before? i assume there's an option for it under cwm?
stamatis16 said:
Dunno what's wrong,why don't you try with stock kernel and gdx,or why don't you try different rom(yea neither gdx nor gzr)
Sent from my X8 using xda premium
Click to expand...
Click to collapse
sure i can try other roms, but the fact that it freezes before installing the rom seems to point towards another problem?
the phone was bought in 2nd hand by the way, maybe there's something that could have happen before it got to me?

You have to format the partitions after flashing the kernel. In CWM recovery, go to 'mounts and storage' and format all the partitions except /sdcard.

feherneoh said:
Try to format all of the partitions (yes, ALL of them), then install ROM again.
After installation turn off the phone, take out the card, then turn phone on.
I hope it will work.
Click to expand...
Click to collapse
Lajbymester said:
You have to format the partitions after flashing the kernel. In CWM recovery, go to 'mounts and storage' and format all the partitions except /sdcard.
Click to expand...
Click to collapse
Just did it and the same thing happened. Flashed nAa-14, booted into cwm, full wipe, full cache wipe, wiped all the partitions but sdcard, installed rom, rebooted and it froze on the logo. Tried again with removing the sdcard and turning the phone on, froze on logo. Flashing it back to stock using PCC atm
By the way, it didn't let me format sd/ext.

Have you tryed with older version of naa? Naa 14 is buggy, naa 11 is the best
Sent from my p970 using xda premium

emaz1ng said:
Just did it and the same thing happened. Flashed nAa-14, booted into cwm, full wipe, full cache wipe, wiped all the partitions but sdcard, installed rom, rebooted and it froze on the logo. Tried again with removing the sdcard and turning the phone on, froze on logo. Flashing it back to stock using PCC atm
By the way, it didn't let me format sd/ext.
Click to expand...
Click to collapse
Try some other roms like minicm7. Do it in this order
Flash the kernel
Boot to cwm
Format system,data,cache
Fullwipe/Factory reset
Install Rom
Reboot
....wait .....
I do this every time i install a new rom..
Make sure The rom you have downloaded belongs to x8..

ElmirBuljubasic said:
Have you tryed with older version of naa? Naa 14 is buggy, naa 11 is the best
Sent from my p970 using xda premium
Click to expand...
Click to collapse
I will do that right away. I will also download a few others roms (and respective kernels) and try them all out. Only one thing, I was going to download MiniCM10 and i saw this in its post: "MiniCM10 is an unofficial port of CyanogenMod 10 for the SEMC msm7x27 devices." What does it mean 'for the SEMC msm7x27 devices'? Is it related to bootload unlock? Because i get Setool2 Certificate instead of SEMC. Does this make my problem a little easier?
EDIT: Ok, i've just tried ICZaraki+nAa-04-ics, minicm10+nAa-jb, gingerdx/gingerzaraki+nAa 11, and guess what, none worked.... We have to start thinking this is not related with the kernel or rom maybe? Any suggestions? When i tried the nAa-11 kernel, when i booted up the phone a white led popped up instead of a green one. I'm not worried if this takes a whole month to fix, i'm up for any suggestions and ideas of any kind, just throw them at me.

emaz1ng said:
I will do that right away. I will also download a few others roms (and respective kernels) and try them all out. Only one thing, I was going to download MiniCM10 and i saw this in its post: "MiniCM10 is an unofficial port of CyanogenMod 10 for the SEMC msm7x27 devices." What does it mean 'for the SEMC msm7x27 devices'? Is it related to bootload unlock? Because i get Setool2 Certificate instead of SEMC. Does this make my problem a little easier?
EDIT: Ok, i've just tried ICZaraki+nAa-04-ics, minicm10+nAa-jb, gingerdx/gingerzaraki+nAa 11, and guess what, none worked.... We have to start thinking this is not related with the kernel or rom maybe? Any suggestions? When i tried the nAa-11 kernel, when i booted up the phone a white led popped up instead of a green one. I'm not worried if this takes a whole month to fix, i'm up for any suggestions and ideas of any kind, just throw them at me.
Click to expand...
Click to collapse
This happen with alfs too? Have you followed all istructions to unlock bootloader?
Ah please..provide logcat! Big devs like rohin,eet, etc maybe can help you with logcat

ElmirBuljubasic said:
This happen with alfs too? Have you followed all istructions to unlock bootloader?
Ah please..provide logcat! Big devs like rohin,eet, etc maybe can help you with logcat
Click to expand...
Click to collapse
Yep, happens with all the kernels i've used, nAa-11/14, nAa JB, ICS, etc....
Googled logcat, i understand its use, but how do you want me to use it?
Yes, bootload is unlocked, i have the "r". Or is there any chance that even with the "r" it's still locked? Anyway, i followed the guides with no problem.

emaz1ng said:
Yep, happens with all the kernels i've used, nAa-11/14, nAa JB, ICS, etc....
Googled logcat, i understand its use, but how do you want me to use it?
Yes, bootload is unlocked, i have the "r". Or is there any chance that even with the "r" it's still locked? Anyway, i followed the guides with no problem.
Click to expand...
Click to collapse
you can try to use my automated tool at my siggy. Just upload the logs at here and the devs will do their jobs

wcypierre said:
you can try to use my automated tool at my siggy. Just upload the logs at here and the devs will do their jobs
Click to expand...
Click to collapse
am i supposed to specify a device (device id?) or just log all and upload them here?

[Q] Omar-ROM Bootloop

Hi there,
today i tried to install omar-rom. Booted into CWM-Recovery - data wipe/factory reset, wipe cache, wipe dalvik-cache, mount and format /system. After that i installed the zip and rebooted the device.
And here is my problem, it won't boot properly, first time it boots into system, i see the app optimizing tab and immediately first reboot, after that it reboots while the motologo is shown or while the intel logo is shown... this goes over and over.
Two weeks ago i tried omar-rom, there was no problem. In the last two weaks i used original firmware with infini-ROM, infini-ROM still works when i use my untouched backup with these mods - omar rom doesn't. Tried Omar-Rom from 06.19 and 06.20, same result.
Anybody had similar problems, anybody can help?
PS: Sry 4 my bad english, im not a native speaker.

FourOne82 said:
Hi there,
today i tried to install omar-rom. Booted into CWM-Recovery - data wipe/factory reset, wipe cache, wipe dalvik-cache, mount and format /system. After that i installed the zip and rebooted the device.
And here is my problem, it won't boot properly, first time it boots into system, i see the app optimizing tab and immediately first reboot, after that it reboots while the motologo is shown or while the intel logo is shown... this goes over and over.
Two weeks ago i tried omar-rom, there was no problem. In the last two weaks i used original firmware with infini-ROM, infini-ROM still works when i use my untouched backup with these mods - omar rom doesn't. Tried Omar-Rom from 06.19 and 06.20, same result.
Anybody had similar problems, anybody can help?
PS: Sry 4 my bad english, im not a native speaker.
Click to expand...
Click to collapse
Exactly the same! It goes up to intel logo, then blacks out, sometimes i see optimizing tab, and bootloop.

Then we 2 are doing something wrong - I tried to explain exactly what I did, hope someone know what I did wrong.
But i feel like a retard, so many people use Omar-Rom without problems...

FourOne82 said:
Then we 2 are doing something wrong - I tried to explain exactly what I did, hope someone know what I wrong.
But i feel like a retard, so many people use Omar-Rom without problems...
Click to expand...
Click to collapse
I flashed it once with no problems, might be firmware related... I wipe and install but still it doesn't boot. infini works fine btw

anerik said:
I flashed it once with no problems, might be firmware related... I wipe and install but still it doesn't boot. infini works fine btw
Click to expand...
Click to collapse
exactly the same 4 me here

I did the wipe and factory reset .... then install zip and reboot. I did not put no mount and sistem
Sent from my XT890 using xda premium

First time i installed omar-ROM i did the same, now i tryed some times and nothing works...

if you have backup back .............. and installs another via fastboot and erase everything again had the omar to the days slowly began to return to normal by fastboot
Sent from my XT890 using xda premium

zipi23 said:
if you have backup back .............. and installs another via fastboot and erase everything again had the omar to the days slowly began to return to normal by fastboot
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
What? Can you explain again?

well personally I did download the jellybean eu rom and installed via fastboot or rom pillama deves have usb debugging install . by omar the flash recovery to install any rom do cache factory reset and reboot in cmw
Sent from my XT890 using xda premium

So you think that not installing via fastboot is the problem or what? Because i dont think so, it worked like a charm 2 weeks ago...

zipi23 said:
well personally I did download the jellybean eu rom and installed via fastboot or rom pillama deves have usb debugging install . by omar the flash recovery to install any rom do cache factory reset and reboot in cmw
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
So, you say we use fastboot to return to stock fw and then install the rom as normal, or over pillama?

Flashed stock via RSD-lite, tryed to install omar-ROM with CWM after that - same result, bootloop.
Rryed everything possible now, nothing works - am I stupid or is there a problem with the last versions of omar-ROM?

I'll try flashing it over another firmware, it worked on retail br for me once
EDIT: Bootloop again, got up to optimizing apps and then reboot... This is so weird

I flashed "Retail Central Europe", same result as you mate.

FourOne82 said:
I flashed "Retail Central Europe", same result as you mate.
Click to expand...
Click to collapse
Well we must be doing something wrong lol

Indeed, but what?

Make sure you have a custom recovery installed.
Download the *.zip file to your SD.
Boot into your custom recovery of choice.
<Optional when upgrading same ROM> Data wipe will be required if you came from another ROM, even stock EU.
Select install zip from external card, and choose the zip file.
Hit Reboot.
Sent from my XT890 using xda premium

This is exactly what i did the first time, result bootloop - tested with 2 versions of omar-ROM.

FourOne82 said:
This is exactly what i did the first time, result bootloop - tested with 2 versions of omar-ROM.
Click to expand...
Click to collapse
What about install stock eu version with rsd
Then set up everithing
After, install omars rom without wipe
Intel device - Razr i Owner
Hit thanks if i help you or you like my style

cyanogen mod 10.2 and 11 problem

I installed both given version of cyanogen mod using proper method but after rebooting into system, bootanimation appears for some time then my z1 restrats. This happens again and again.
I tried various ways like changed the kernel etc. But still no luck.
Have someone any solution???

jobangill99 said:
I installed both given version of cyanogen mod using proper method but after rebooting into system, bootanimation appears for some time then my z1 restrats. This happens again and again.
I tried various ways like changed the kernel etc. But still no luck.
Have someone any solution???
Click to expand...
Click to collapse
Have you cleared cache after installing CM11? Which CM11 did you install? There are some issues with the current FXP versions. Use this one. http://get.cm/get/ecz

Rekoil said:
Have you cleared cache after installing CM11? Which CM11 did you install? There are some issues with the current FXP versions. Use this one. http://get.cm/get/ecz
Click to expand...
Click to collapse
Yes I tried. Different versions like fxp 302, 301, from fxp source and from get.cm but did not find what the problem is

jobangill99 said:
Yes I tried. Different versions like fxp 302, 301, from fxp source and from get.cm but did not find what the problem is
Click to expand...
Click to collapse
Install the boot partition from this zip, load up recovery, flash the zip, clear cache, reboot. Done. (you might want to install GApps there somewhere as well)

Tried wiping data too?
Sent from my C6903 using Tapatalk

Rekoil said:
Install the boot partition from this zip, load up recovery, flash the zip, clear cache, reboot. Done. (you might want to install GApps there somewhere as well)
Click to expand...
Click to collapse
Did what you said. now stuck at boot animation waited for 5minutes but nothing was happened. Is it normal? And what cache to wipe? I wiped both dalvik And cache partition

tomascus said:
Tried wiping data too?
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
You mean all internal storage including media?
I Did factory reset

jobangill99 said:
You mean all internal storage including media?
I Did factory reset
Click to expand...
Click to collapse
If you've just unlocked the bootloader and never booted a Sony ROM after the fact then you'll not be able to do a simple factory reset, but will need to do a full /data and /data/media (/sdcard) format. So do that first, then flash the zip(s), and then it should boot fine.

wiped full internal storage also tried relock and again unlocked the bootloader but still stuck at bootanmation,
also slimkat and slimbean roam won't boot up but ihackers working fine.....strange

jobangill99 said:
wiped full internal storage also tried relock and again unlocked the bootloader but still stuck at bootanmation,
also slimkat and slimbean roam won't boot up but ihackers working fine.....strange
Click to expand...
Click to collapse
Something is wrong with your phone in that case... Either that or you're doing something wrong.
Sent from my Xperia Z1

N7000 stuck at boot screen

This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?

bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps

panamera2011 said:
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps
Click to expand...
Click to collapse
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.

bfürbanane said:
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.
Click to expand...
Click to collapse
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk

panamera2011 said:
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk
Click to expand...
Click to collapse
Where does it say to install SuperSU? How would that be possible when Android is not booting.

bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
I'm sorry but it's really strange, never had installation issues with any version of this rom
Have you tried this kernel to install the rom?
https://www.androidfilehost.com/?fid=24052804347829437
Sent from my H60-L02 using Tapatalk

bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.

bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Sorry but I confused the message with the MIUI 6.2.12 thread [emoji16]
Sent from my H60-L02 using Tapatalk

AutumQueen92 said:
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.
Click to expand...
Click to collapse
I tried that. I went to samsung-updates.com and downloaded a version that I believe is compatible with my baseband version. Is there any way to check what baseband version my phone has? Then I flashed with odin and was stuck in a bootloop. I then flashed PhilZ recovery and the boot hangs at the samsung logo.

bfürbanane said:
Is there any way to check what baseband version my phone has?
Click to expand...
Click to collapse
Settings>about phone>

IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
The phone is not booting.

IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
Doh! sorry not reading what's in front of me. I did once read that you can get phone number via ADB, maybe the same will work for baseband?

bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..

N00b... said:
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..
Click to expand...
Click to collapse
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.

bfürbanane said:
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.
Click to expand...
Click to collapse
I think i got same problem as you do. Im digging on internet , if i get something ill write here.

Condox18 said:
I think i got same problem as you do. Im digging on internet , if i get something ill write here.
Click to expand...
Click to collapse
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.

same problem
bfürbanane said:
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.
Click to expand...
Click to collapse
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.

Condox18 said:
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.
Click to expand...
Click to collapse
Thanks for the pointer. I subscribed myself to that thread.