Database Develop

SGS I9000 too slow!

Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:

I think it is a hardware problem mate(since you flashed too many roms...)
Rooting wont help you too so...
Even if you dont have warranty give it for repairing..
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi

Uhm i don t have warranty anymore but i'm able to disassembly and replace any piece i need. Hope it is not a motherboard prolem, but i can t image something different...

NotoriuStyle™ said:
Uhm i don t have warranty anymore but i'm able to disassembly and replace any piece i need. Hope it is not a motherboard prolem, but i can t image something different...
Click to expand...
Click to collapse
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC

xsenman said:
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
Click to expand...
Click to collapse
When you say format everything do you mean format /boot too ? Thank u for your help =]

NotoriuStyle™ said:
When you say format everything do you mean format /boot too ? Thank u for your help =]
Click to expand...
Click to collapse
can be done, but If you don't have boot loader on the ROM , you will have problem, so avoid it , for now

xsenman said:
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
Click to expand...
Click to collapse
I did everything and than flashed "i9000 Rescue Darky's ROM Resurrection edition" but with no result, even the robotic voice of Darky's ROM is laggy!! Trying other rescue kit and will let you know

NotoriuStyle™ said:
I did everything and than flashed "i9000 Rescue Darky's ROM Resurrection edition" but with no result, even the robotic voice of Darky's ROM is laggy!! Trying other rescue kit and will let you know
Click to expand...
Click to collapse
remember to do full wipes /factory reset before and after flashing the ROM and Internal SD card must be formatted

xsenman said:
remember to do full wipes /factory reset before and after flashing the ROM and Internal SD card must be formatted
Click to expand...
Click to collapse
Yes i always wipe data, wipe cache, wipe dalvik and wipe battery stats. Tried even GB Flash Kit and Rescue Kit for i9000 using heimdall packed but nothing. Boot animation is always slow and after 1 hour, after getting loaded, touch doesn't work =(

Nothing ... tried everything excpet formatting /boot. Will i risk to brick my device if i choose that option ?

NotoriuStyle™ said:
Nothing ... tried everything excpet formatting /boot. Will i risk to brick my device if i choose that option ?
Click to expand...
Click to collapse
Nope, but you must not try to reboot after formatting it, . You need to power down, do a battery pull and flash a ROM package with boot loader for phone to function

xsenman said:
Nope, but you must not try to reboot after formatting it, . You need to power down, do a battery pull and flash a ROM package with boot loader for phone to function
Click to expand...
Click to collapse
I've done 3 wipes then the 5 formats (boot too) then while still in recovery flash Elite's JB RC 12.1 rom .. if problems then it's deff a hardware issue
Sent from my GT-I9300 using xda premium

jj92942000 said:
I've done 3 wipes then the 5 formats (boot too) then while still in recovery flash Elite's JB RC 12.1 rom .. if problems then it's deff a hardware issue
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Nothing =( every rom i flash via CWM gives speed back but touch doesn't work =S

NotoriuStyle™ said:
Nothing =( every rom i flash via CWM gives speed back but touch doesn't work =S
Click to expand...
Click to collapse
Then it's hardware .. any gb rom gives you touch?
Sent from my GT-I9300 using xda premium

jj92942000 said:
Then it's hardware .. any gb rom gives you touch?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Uhm every rom i tried via CWM, and even the stock rom when it gets loaded, doesn't give me a working touchscreen. This problem happened last month too and after flashing a lot of roms i managed to solve it in the end, but i was just lucky because i didn't know what the device had and i solved just flashing random ROMS and getting solved with XXJW7. That's why i'm not so sure it is a hardware problem =(

NotoriuStyle™ said:
Uhm every rom i tried via CWM, and even the stock rom when it gets loaded, doesn't give me a working touchscreen. This problem happened last month too and after flashing a lot of roms i managed to solve it in the end, but i was just lucky because i didn't know what the device had and i solved just flashing random ROMS and getting solved with XXJW7. That's why i'm not so sure it is a hardware problem =(
Click to expand...
Click to collapse
Try Elite JB RC12.1, if working on jw7, do a android backup, then you'll have to flash JVU 1st, if touch screen works then it'll work with the JB rom, here's a trick, instructions are there but do this. Backup everything to pc, take out sdcard, before flash jvu, do 3 wipes, data, cache, dalvik, then go to usb mount, format 5 items there, boot, data, cache, system, sdcard ( last wipes everything). Now do 3 wipes again, yes again, flash JVU, root, transfer Rom to sdcard, 3 wipes, do usb mount, then 4 formats (not sdcard), 3 wipes again, flash JB rom. If bootloop, no bigger it just flashed kernel, take battery out, wait back in recovery flash Rom. You'll be on JB.
Sent from my GT-I9300 using xda premium

dreamer94 said:
I think it is a hardware problem mate(since you flashed too many roms...)
Rooting wont help you too so...
Even if you dont have warranty give it for repairing..
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Flashing your phone multiple times, does not make it slow. I have flash my phone almost every day, to check out new roms that are released every day and my phone hasn't slowed down a bit
---------- Post added at 04:16 PM ---------- Previous post was at 04:10 PM ----------
NotoriuStyle™ said:
Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
Click to expand...
Click to collapse
Why dont you try flashing your original firmware via Odin with "repartition" ticked. Once that is done, let your phone boot and see if there's and lag. If lag still persists, go to CMW, format system, boot and data and restart your phone and then check again

Touchscreen problem
NotoriuStyle™ said:
Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
Click to expand...
Click to collapse
Hey!! I tried various ROM combinations and it worked for a few months. Although even after a few days, the problem would reappear and I was forced to flash again(it started working after flashing about 30-50 ROMs). Finally, a month back, I came across the same problem again but this time, nothing worked. After hitting my head on the wall for a month, I finally gave it to the Samsung ppl and they figured that the problem was with the touchscreen!!(zoinks!!) They will replace the touchscreen and it would cost me $145(8,000INR , expired warranty). They'll return it in 4 days. I'll post more when I get my SGS back.

Hmm, looks to me, you must have flashed something wrong/flashing process goes wrong. I would suggest this 'solution':
1. Flash a new recovery system. I suggest the latest TWRP recovery or flash the latest CWM. To me, CWM has given me lots of problems. You can flash it through computer or through CWM using their flashable zip.
2. Once then, wipe everything! Data, cache, dalvik cache.
3. Next, format the system! If you formatted system, you will lose your current rom. Meaning the phone will not boot up until you install/flash a ROM.
4.Install necessary stuff like Google Apps
Done! Things should be working right now. I had problems like you, my phone sometimes takes 2-5 minutes to boot.
I'm using the Samsung Galaxy S Plus I9001. So, I flashed Acro86's ICS rom. Super smooth.
Hope I helped you!
Sent from my GT-I9001 using xda app-developers app

Hi, I have exactly the same problems.
I guess it's also touch error, I already changed it once and after the year and then started having problems as it was pressed alone, stuck all the time and stopped working. As I was reading and testing, I think I'll buy again the touch.
From Argentina.
Regards.

P880 won't boot after 442 flashing

Hi guys,
Need your assistance in this. I downloaded the 4.4.2, the Gapps (stock version), and the CWM Touch 6044. Flashed successfully the 6044. Rebooted, and flashed omni 442 and then the gapps. Did a wipe data/factory reset. Then pressed reboot device. The phone will restart and stay stuck at the Omni Logo. No progress from there at all. Did a few other reboots and different combinations to the above but to no result. Stuck there. Finally, did a restore from my backup just to have a phone again..Any idea what I did wrong from the start?

How long did you wait at the first bootup? It took quite long for me, so I'd suggest waiting up to 20 minutes before turning off the phone. Try flashing with the most lightweight Gapps package, that's what everyone seems to be using. You could also try wiping cache and dalvik cache.

Nalefyre said:
How long did you wait at the first bootup? It took quite long for me, so I'd suggest waiting up to 20 minutes before turning off the phone. Try flashing with the most lightweight Gapps package, that's what everyone seems to be using. You could also try wiping cache and dalvik cache.
Click to expand...
Click to collapse
Well, did the Dalvik cache but later on, when I was experimenting. I had waited at least 16/18 minutes till my patience ran out...
Decided to have one more go right now. 1. Did a wipe data / factory reset. 2. After that, wiped Dalvik cache. 3. Presently installing Omni and then will install gapps. 4. Will reboot and leave it to boot until I leave work. (couple of hours from now). And will see what happens.
- Forgot to add thaty in all instances, I selected YES in the "root" question in the end. -
Thanks for replying!
---Update
Nothing changed. Stuck at the Omni logo for about 50 minutes..

The_Sniper said:
Well, did the Dalvik cache but later on, when I was experimenting. I had waited at least 16/18 minutes till my patience ran out...
Decided to have one more go right now. 1. Did a wipe data / factory reset. 2. After that, wiped Dalvik cache. 3. Presently installing Omni and then will install gapps. 4. Will reboot and leave it to boot until I leave work. (couple of hours from now). And will see what happens.
- Forgot to add thaty in all instances, I selected YES in the "root" question in the end. -
Thanks for replying!
---Update
Nothing changed. Stuck at the Omni logo for about 50 minutes..
Click to expand...
Click to collapse
So don't flash gapps and ROM back to back. Flash ROM then reboot and after waiting 5 mins reboot and flash gapps again.
Sent from my LG-P880 using XDA Premium 4 mobile app

Maybe format /system in addition to the factory reset (it's under mounts and storage). So you get a completely clean install
Sent from my LG Optimus 4X HD

Thanks for your advice guys - Unfortunately I don't see any results
I booted in recovery and in this order: Wiped data / did factory reset - then wiped Dalvik - then did format /system - then flashed successfully Omnirom and at the end select YES in the "root" question. Did not touch the Gapps.
Same result - has been in the Omni Logo for more than half an hour.
Can someone tell me the absolute prerequisites needed to install and boot normally? Apart from CWM Touch 6.0.4.4 that is?
Thanks in advance

I really don't see any more required steps to install OmniRom. Did you try another downloaded OmniRom? Maybe something is wrong with your used version.
Sent from my LG Optimus 4X HD

The_Sniper said:
Thanks for your advice guys - Unfortunately I don't see any results
I booted in recovery and in this order: Wiped data / did factory reset - then wiped Dalvik - then did format /system - then flashed successfully Omnirom and at the end select YES in the "root" question. Did not touch the Gapps.
Same result - has been in the Omni Logo for more than half an hour.
Can someone tell me the absolute prerequisites needed to install and boot normally? Apart from CWM Touch 6.0.4.4 that is?
Thanks in advance
Click to expand...
Click to collapse
Select No in the root option.
Sent from my LG-P880 using XDA Premium 4 mobile app

[email protected] said:
Select No in the root option.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That shouldn't do any damage (I tried both ways and didn't notice any difference )
I really think your downloaded ROM zip is corrupt as nobody else having problems with it
Sent from my LG Optimus 4X HD

Omario-242 said:
That shouldn't do any damage (I tried both ways and didn't notice any difference )
I really think your downloaded ROM zip is corrupt as nobody else having problems with it
Sent from my LG Optimus 4X HD
Click to expand...
Click to collapse
Yeah, will redownload - choosing NO also did not make any difference

Did you mount all under mounts and storage?

Coolneng said:
Did you mount all under mounts and storage?
Click to expand...
Click to collapse
all I did under mount & storage is the "format /system". Did not mount anything any other time. Is this part of the procedure too or are we shooting blind here? - Cause directions in the post say flash rom, flash apps, wipe data & reboot, let alone the 15 other combos I've done.
Haven't tried anything yet cause I need to re-download the ROM and presently I can't get any of my 3 PCs "see" the LG's contents like a flash drive. Can only do it in my work's laptop. Beats me why..

If you don't have important data, format internal storage too. No idea for 4.4, but if you flash kdz, this is a must.
Sent from my LG-P880 using XDA Premium 4 mobile app

[email protected] said:
If you don't have important data, format internal storage too. No idea for 4.4, but if you flash kdz, this is a must.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks Black, will try that too. Have everything I need in Helium right now, ready to be restored at any time.

The_Sniper said:
all I did under mount & storage is the "format /system". Did not mount anything any other time. Is this part of the procedure too or are we shooting blind here? - Cause directions in the post say flash rom, flash apps, wipe data & reboot, let alone the 15 other combos I've done.
Haven't tried anything yet cause I need to re-download the ROM and presently I can't get any of my 3 PCs "see" the LG's contents like a flash drive. Can only do it in my work's laptop. Beats me why..
Click to expand...
Click to collapse
It is important to mount everything as far as I know. In my old device's forum it always a step that is specified, I never see it in these forums though.
Try it, you don't loose anything.

[Q] Changin ROM fail

Hi! When I change to another ROM and I wipe data, my SGS+ boots fine but, when I reboot it, ALWAYS get stuck on kernel logo... What can I do? When it happens I always flash with Odin but I don't want to do that every time I want to change the ROM

Slash137 said:
Hi! When I change to another ROM and I wipe data, my SGS+ boots fine but, when I reboot it, ALWAYS get stuck on kernel logo... What can I do? When it happens I always flash with Odin but I don't want to do that every time I want to change the ROM
Click to expand...
Click to collapse
Could you give a fair idea of how much time you waited for?

Gokulbalram said:
Could you give a fair idea of how much time you waited for?
Click to expand...
Click to collapse
It keeps freezed 5 minutes on the kernel logo and then, automatically it shutdowns. If I try to power it on happens the same.

How often do you keep changing ROMs?
At least it boots upto the kernel right? That's awesome, because the last time, mine wouldn't go beyond the Samsung logo. Just let me know if the next time this happens, it atleast boots to Recovery mode.
Good Luck! Hit Thanks if I'm helpful!

Could be a conflict of init.d files, i always delete my init.d files before flashing another rom.

Gokulbalram said:
How often do you keep changing ROMs?
At least it boots upto the kernel right? That's awesome, because the last time, mine wouldn't go beyond the Samsung logo. Just let me know if the next time this happens, it atleast boots to Recovery mode.
Good Luck! Hit Thanks if I'm helpful!
Click to expand...
Click to collapse
It boots untill "Samsung Galaxy S Plus - cyanogenmod blablabla" but the bootanimation doesn't appear. After 5 minutes it goes off automatically.

pryerlee said:
Could be a conflict of init.d files, i always delete my init.d files before flashing another rom.
Click to expand...
Click to collapse
Then, if now I want to flash MiUI 4.2.2 and I'm in PAC·ROMS 4.4.2, I must wipe data, dalvik and... how can I wipe the Init.d data?

just use "root explorer" and goto /system/etc/init.d and delete the files that are in there before flashing a custom rom.

pryerlee said:
just use "root explorer" and goto /system/etc/init.d and delete the files that are in there before flashing a custom rom.
Click to expand...
Click to collapse
That could be a solution. Although, you never told me if you're able to boot into recovery mode!

yeah sorry forgot to ask you, anyway if you have a custom rom installed then most roms have init.d and a custom recovery already, you could even boot into recovery and also wipe system before flashing custom rom (which will wipe init.d folder) but make sure you have a nandroid backup first just in case.

Gokulbalram said:
That could be a solution. Although, you never told me if you're able to boot into recovery mode!
Click to expand...
Click to collapse
Yes, I'm able. Haha. Always. I can make it boot one time making a factory reset but, after reboot, it doesn't boot again.

Slash137 said:
Yes, I'm able. Haha. Always. I can make it boot one time making a factory reset but, after reboot, it doesn't boot again.
Click to expand...
Click to collapse
If you're able to boot into recovery mode, why do you fret? Just boot into recovery mode and flash the file once again. At times, when you flash a new ROM, it first only flashes the kernel (Don't know why) and then you have the ability to boot to system.
Hit thanks if I helped!
Sent from my GT-I9000 using XDA Premium 4 mobile app

Gokulbalram said:
If you're able to boot into recovery mode, why do you fret? Just boot into recovery mode and flash the file once again. At times, when you flash a new ROM, it first only flashes the kernel (Don't know why) and then you have the ability to boot to system.
Hit thanks if I helped!
Sent from my GT-I9000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried to flash more than one time and it doesn't boot... f*ck

Ouch. That's bad to hear. Now all you can do is the Odin stuff. Even if a phone won't boot, it'll always go into download mode (I'm guessing you already knew that)
Sent from my Magic Talking Parrot. Which is an i9000

Gokulbalram said:
Ouch. That's bad to hear. Now all you can do is the Odin stuff. Even if a phone won't boot, it'll always go into download mode (I'm guessing you already knew that)
Sent from my Magic Talking Parrot. Which is an i9000
Click to expand...
Click to collapse
So, every time I want to change ROM I must flash first with Odin???? Damn.

Slash137 said:
So, every time I want to change ROM I must flash first with Odin???? Damn.
Click to expand...
Click to collapse
Could you give a list of some ROMs you used?

Gokulbalram said:
Could you give a list of some ROMs you used?
Click to expand...
Click to collapse
CM11, MK4.4.2, PAC4.4.2, RemICS JB v4.2, Beam_Kat4.4.2 ((HALO)) v9.2.0, M.O.W ROM JB 4.2.2 v4.1.
Every time I changed any ROM I always made a factory reset, I wiped cache and dalvik cache.

Slash137 said:
CM11, MK4.4.2, PAC4.4.2, RemICS JB v4.2, Beam_Kat4.4.2 ((HALO)) v9.2.0, M.O.W ROM JB 4.2.2 v4.1.
Every time I changed any ROM I always made a factory reset, I wiped cache and dalvik cache.
Click to expand...
Click to collapse
I'm actually clueless about why this is happening. I'll try and let you know after some research.
Sent from my Magic Talking Parrot. Which is an i9000

Gokulbalram said:
I'm actually clueless about why this is happening. I'll try and let you know after some research.
Sent from my Magic Talking Parrot. Which is an i9000
Click to expand...
Click to collapse
Something new?

Slash137 said:
Something new?
Click to expand...
Click to collapse
(Obvious Question) You do wipe your '/system' partition right?

Always stuck at Formatting cache

Hello everyone.
Lately I had this frustrating problem with formatting the cache through any recovery I ever had. ALWAYS!
How flashing a ROM goes:
- I'm powering off the phone and enter in recovery.
- I select Wipe Data/Cache (Or Wipe for a new ROM option in CWM)
- It starts by formatting data and next is cache, where I get stuck.
I don't have many options. I can either pull out the battery or wait a while. Oh, no worries, after 5 minutes of "formatting cache" it reboots, with the current ROM messed, obviously.
It's annoying because no one seems to have this problem and it happens every single time when I wipe.
Hope there is someone who will bother helping me out with this.
P.S. - I'm no expert, more like a noob, so don't ask me too-technical questions.
Thankiees!

switch to latest TWRP

flash stock om once with odin
wipe data and cache with stock recovery once
then install latest TWRP
that fixed it for me when i had that issue

maultasche said:
switch to latest TWRP
Click to expand...
Click to collapse
I had the latest TWRP when I did so. No matter what recovery I use, I always get stuck there.

DrmohamedShawky said:
flash stock om once with odin
wipe data and cache with stock recovery once
then install latest TWRP
that fixed it for me when i had that issue
Click to expand...
Click to collapse
Thanks for your time, I'll try your method and tell you how it goes.

Spooms said:
Thanks for your time, I'll try your method and tell you how it goes.
Click to expand...
Click to collapse
Thanks! Your method did the trick!
Sent from my GT-I9305 using XDA-Developers mobile app

TWRP 2.8.5.0 for mini 2

with happyness i build twrp from cm12 source and it work but i don't test all his features
because i have ideas about building cm12 and at least i have hope
my opinios about the recovery
is nice
touch recovery
internal and external storage working
the problem is some time it reboot suddently that all i notice
version 3
http://www.mediafire.com/download/833d190hruv916f/TWRP-v2.8.5.0-jena.zip
fixed the recovery loop and maybe the suddent reboot finally
credits to
thewhisp for his caf device tree
lorn10 for his gift
i don't remember
dont forget to press thanks button or donate if you like my work

Wow! TWRP!
So good, you're great ;D

Flowah123 said:
Wow! TWRP!
So good, you're great ;D
Click to expand...
Click to collapse
test it i want to know what his problem
and it can work with my cm11

simokb1996 said:
test it i want to know what his problem
and it can work with my cm11
Click to expand...
Click to collapse
Yeah, I'll try it in these days!
Do I have to (or "have I to"? I forgot how to English x.x) test something in particular for you?
EDIT: How to flash it?
Go in into CWM and flash it as .zip, is it correct?

simokb1996 said:
with happyness i build twrp from cm12 source and it work but i don't test all his features
because i have ideas about building cm12 and at least i have hope
my opinios about the recovery
is nice
touch recovery
internal and external storage working
the problem is some time it reboot suddently that all i notice
this is the link
http://www.mediafire.com/download/nsvjg6b55to6sgn/TWRP2.8.5.0.zip
credits to
thewhisp for his caf device tree
lorn10 for his gift
i don't remember
dont forget to press thanks button or donate if you like my work
Click to expand...
Click to collapse
You're the best!!!!!

So, I tried you're TWRP.
I tried to navigate a little into the menus, I tried to make a Nandroid backup, but it rebooted D:
So, I tried again to backup. It rebooted again D:
"Doesn't matter" I said.
Then, I full wiped (system, cache, dalvik, data) and I re-flashed your ROM (CM 11). Flashing went ok, but while I was wiping dalvik/cache, it rebooted D:
I think your recovery can't stay too much time "in activity", it's a little unstable.
Anyway, I rebooted system but it goes into recovery D:
Tried again, but nothing, it goes into recovery. So, I tried again to full wipe and re-flash your ROM... But nothing D: still goes into recovery D:
Sorry for my bad english, hope you can understand what I write D:

Flowah123 said:
So, I tried you're TWRP.
I tried to navigate a little into the menus, I tried to make a Nandroid backup, but it rebooted D:
So, I tried again to backup. It rebooted again D:
"Doesn't matter" I said.
Then, I full wiped (system, cache, dalvik, data) and I re-flashed your ROM (CM 11). Flashing went ok, but while I was wiping dalvik/cache, it rebooted D:
I think your recovery can't stay too much time "in activity", it's a little unstable.
Anyway, I rebooted system but it goes into recovery D:
Tried again, but nothing, it goes into recovery. So, I tried again to full wipe and re-flash your ROM... But nothing D: still goes into recovery D:
Sorry for my bad english, hope you can understand what I write D:
Click to expand...
Click to collapse
ok thanks for your testing
you said that
backup is not working
recovery loop
it reboot sudently
thanks for your testing

simokb1996 said:
ok thanks for your testing
you said that
backup is not working
recovery loop
it reboot sudently
thanks for your testing
Click to expand...
Click to collapse
Probably, backup could work, but it takes "a lot" of time and your recovery can't stay awake for a lot of time without rebooting.
This is what I think.

Flowah123 said:
Probably, backup could work, but it takes "a lot" of time and your recovery can't stay awake for a lot of time without rebooting.
This is what I think.
Click to expand...
Click to collapse
that was i thinking it is not a backup problem
it just the random reboot

simokb1996 said:
ok thanks for your testing
you said that
backup is not working
recovery loop
it reboot sudently
thanks for your testing
Click to expand...
Click to collapse
@simokb1996 it is rebooting in 1 minute and 39 seconds
backup works fine
only it has random reboot and recovery bootloop pls fix it soon it is really good recovery and i Will fix cm12.1 problem soon (my "not working" rom)

Could you update TWRP to the latest v3?
Or is it impossible for our phone?

@simokb1996 Can you fix recovery loop and rebooting pls. your recovery will be great without rebooting and recovery loop

xEmre66 said:
@simokb1996 Can you fix recovery loop and rebooting pls. your recovery will be great without rebooting and recovery loop
Click to expand...
Click to collapse
i look for fix and i m a little busy
if i have some time i will fix it

Flowah123 said:
Could you update TWRP to the latest v3?
Or is it impossible for our phone?
Click to expand...
Click to collapse
no it not impossible but when i fix twrp 2.8 i will build fix twro 3.0

simokb1996 said:
no it not impossible but when i fix twrp 2.8 i will build fix twro 3.0
Click to expand...
Click to collapse
Supeeeeeeeerrr!!!

@simokb1996 , thank you for doing v2 twrp for our phone. But it's the same with v1. Has recovery loop, reboots suddenly, and has white screen during boot( not a problem ) otherwise recovery is very good

xEmre66 said:
@simokb1996 , thank you for doing v2 twrp for our phone. But it's the same with v1. Has recovery loop, reboots suddenly, and has white screen during boot( not a problem ) otherwise recovery is very good
Click to expand...
Click to collapse
indeed. it reboots in white screen, may be you can check this out please, thank you for the efforts

xEmre66 said:
@simokb1996 , thank you for doing v2 twrp for our phone. But it's the same with v1. Has recovery loop, reboots suddenly, and has white screen during boot( not a problem ) otherwise recovery is very good
Click to expand...
Click to collapse
ok i will see about that

simokb1996 said:
with happyness i build twrp from cm12 source and it work but i don't test all his features
because i have ideas about building cm12 and at least i have hope
my opinios about the recovery
is nice
touch recovery
internal and external storage working
the problem is some time it reboot suddently that all i notice
this is the link
http://www.mediafire.com/download/nsvjg6b55to6sgn/TWRP2.8.5.0.zip
version 2
http://www.mediafire.com/download/wa5b77bs4p28e4o/TWRP2.8.5.0%282%29.zip
fixed the recovery loop and maybe the suddent reboot
credits to
thewhisp for his caf device tree
lorn10 for his gift
i don't remember
dont forget to press thanks button or donate if you like my work
Click to expand...
Click to collapse
@simokb1996, your recovery isn't rebooting anymore only it has recovery loop please fix recovery loop ......

xEmre66 said:
@simokb1996, your recovery isn't rebooting anymore only it has recovery loop please fix recovery loop ......
Click to expand...
Click to collapse
i will stop the devpt for now until i repair my pc because is broken for now you can continue using cwm 6.0.5.1 is stable for now