Related
HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD
Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?
still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Can you post call recorder thread link you tried to flash?
Sent with L0VE
baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached
sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE
Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,
sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?
letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India
Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium
i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot
I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium
Hi Experts,
I recently rooted my phone and installed SuperNexus ROM on it after CWM mode.
I want the Stock JB back on my phone and also unroot the phone. How do I do it ?? Any pointers or help ???
I found this link while browsing..please tell me is it safe to follow this procedure for JB stock rom too.
http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
AnjniG said:
I found this link while browsing..please tell me is it safe to follow this procedure for JB stock rom too.
http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
Click to expand...
Click to collapse
Yes, it's safe but I advice you to wipe everything before you go stock.
Flash one of philz's kernels for JB(latest I guess), reboot recovery and then wipe everything. My advice is to wipe cache, system, data, preload, dalvik and even emmc. You will ofcourse lose everything on internal card. After that do a full wipe/factory reset(the one which says install new rom).
Then reboot to download mode, press up and flash stock JB firmware via PC Odin just like in the link.
I followed the procedure in the link and its tuck after samsung logo..just keeps reloading again ad again samsung logo..
what do i do now??
AnjniG said:
I followed the procedure in the link and its tuck after samsung logo..just keeps reloading again ad again samsung logo..
what do i do now??
Click to expand...
Click to collapse
Can you get to recovery? Press Volume Up + Home + Power?
yes I am in recovery
AnjniG said:
yes I am in recovery
Click to expand...
Click to collapse
Ok. Are you in recovery of the stock JB that you were trying to flash?
Or just tell me, what kind of stock ROM did you flash via Odin.
This is stock JB's recovery..I flashed the official ROM for India DDLSC.
AnjniG said:
This is stock JB's recovery..I flashed the official ROM for India DDLSC.
Click to expand...
Click to collapse
Ok. Download this:
http://d-h.st/pM3
Put it on you SDcard and flash it through this stock recovery. Do it and we'll continue when you flash it.
al right done.. whats next
AnjniG said:
al right done.. whats next
Click to expand...
Click to collapse
Ok, now click reboot system and when it tries to boot, hold Volume Up + Home + Power to go to recovery again. This time you should be in Philz custom recovery.
Yes I am in that custom recovery
AnjniG said:
Yes I am in that custom recovery
Click to expand...
Click to collapse
Ok, great. Now you will wipe everything.
Go to mount and storage and:
-format cache
-format system
-format data
-format preload
-format emmc(it will delete your entire internal storage, I do it to really delete everytihng, you don't have to do it if you have important data but I advice it)
Then go back and go advanced:
-wipe dalvik
Then go to wipe/factory reset and select the second one(Install new ROM - this will again format everything).
Get back when you're done.
Yes done that ..what to do next
AnjniG said:
Yes done that ..what to do next
Click to expand...
Click to collapse
Now go to download mode. You can reboot to download somewhere in the menu. Maybe under advanced, or under Philz settings, just find reboot to download.
When it boots, press up and hook up the phone to your computer.
Run PC Odin and you should see a yellow coloured window that says that device is detected.
Now under PDA select your stock ROM md file. Check "Auto reboot" and "F. Reset time" and nothing else.
After all is setup, click Start and wait to complete.
I am doing that.. just a question was that the boot loop issue of stock ROM?
done with odin device is reloading.
Yes it started after taking a bit long time..
I am configuring it now..
I have few questions about it..
Is my device still rooted? If yes how to unroot it.
Is philz recovery still present?
everytime I flash a ROM I will have to wipe everything?
AnjniG said:
Yes it started after taking a bit long time..
I am configuring it now..
I have few questions about it..
Is my device still rooted? If yes how to unroot it.
Is philz recovery still present?
everytime I flash a ROM I will have to wipe everything?
Click to expand...
Click to collapse
You are not rooted anymore and you have a stock recovery, everything is stock. You don't have to wipe everything when you flash a new
ROM, but it is very adviced, also it depends on the ROM you are flashing.
The bootloop probaly occured becouse you were coming from an AOSP based ROM and probably didn't wipe anything.
Thanks mate..you are a real life saver..
you are a dude..thanks a ton for helping me so patiently ..
Next time I will be carefull..
AnjniG said:
Thanks mate..you are a real life saver..
you are a dude..thanks a ton for helping me so patiently ..
Next time I will be carefull..
Click to expand...
Click to collapse
No problem:good:.
Yes, next time you should backup your important data and always wipe everything. That's the most reliable way.
UNOFFICIAL CWM 6.0.5.1.4 recovery for Motorola Razr I (SMI/XT890)
A working CWM recovery 6.0.5.1.4 from source (non-touch).
I am not responsible for anything that happens, make sure u always have a backup on the external sd and on your pc!
Download the zip file, extract and flash through fastboot or what ever way u like.
Notes:
Increased overall performance
Credits:
Cyanogenmod
Turl1
Hazou
XDA:DevDB Information
CWM based recovery 6.0.5.1.4, Tool/Utility for the Motorola RAZR i
Contributors
Hazou
Version Information
Status: Stable
Current Stable Version: 6.0.5.1.4
Stable Release Date: 2015-01-20
Created 2015-01-03
Last Updated 2015-01-20
Could be a bug or a one-time thing, it stopped when doing wipe data/factory reset, rebooted and it seems it did it anyways, but wanted to flash a rom xD. TWRP one is working perfectly tough, even with format system
Went to format cache and it seem cwm has just frozen, any ideas on how to reboot?
Volume down + power got it to reboot, but now stuck in bootloop
CWM corrupted the cache I think but fixed it via fastboop
mcpaddington said:
Went to format cache and it seem cwm has just frozen, any ideas on how to reboot?
Volume down + power got it to reboot, but now stuck in bootloop
CWM corrupted the cache I think but fixed it via fastboop
Click to expand...
Click to collapse
hmm, didn't thing cwm will have errors with this. It is build with the same options turl had build his.
I will remove the download for now. We already have 2 problems.
Edit:
Recompiled the recovery. everything is working on my phone. need some testers
I'll test it soon! Can't say i like it better than twrp thou
Hazou said:
hmm, didn't thing cwm will have errors with this. It is build with the same options turl had build his.
I will remove the download for now. We already have 2 problems.
Edit:
Recompiled the recovery. everything is working on my phone. need some testers
Click to expand...
Click to collapse
Still problems with wiping cache. On the recoveries boot it says "Warning: No file_contexts". Stuck on formatting /cache.
It finishes formatting the cache but doesn't give an update to tell us it's complete.
mcpaddington said:
Still problems with wiping cache. On the recoveries boot it says "Warning: No file_contexts". Stuck on formatting /cache.
It finishes formatting the cache but doesn't give an update to tell us it's complete.
Click to expand...
Click to collapse
ok, the warning can be forgotten. it is not a problem
Formatting cache takes some time. i have investigated it a bit. As far as i can see everything goes fine. It just takes some time and doesnt give u the complete sentence.
Hazou said:
ok, the warning can be forgotten. it is not a problem
Formatting cache takes some time. i have investigated it a bit. As far as i can see everything goes fine. It just takes some time and doesnt give u the complete sentence.
Click to expand...
Click to collapse
For me error mounting system when i would like to flash Omar ROM now i'm with a razr I stop working i don't know why but i try to return to old CWM if i can :crying:
EDIT : Flash old CWM with my SD Card i'm happy go back to a working Razr I ... I don't know where is the problem but seem last CWM or other for SMI is to buggy
unable to flash omar 20-09-2013, update started, but never ended (waiting more than 15 minutes...)
so hard power off and flashing other recovery by flashboot...
double post ...
New version, someone want to try it for me?
Hazou said:
New version, someone want to try it for me?
Click to expand...
Click to collapse
Sure
edit: just stays at 'flashing recovery...'
edit2: installed, testing my rom now
anerik said:
Sure
edit: just stays at 'flashing recovery...'
Click to expand...
Click to collapse
really? how is that possible?
Hazou said:
really? how is that possible?
Click to expand...
Click to collapse
read the edit, flashed succesfully, testing now
anerik said:
read the edit, flashed succesfully, testing now
Click to expand...
Click to collapse
Pfew,
Can u test installing your ROM with and without the format line? If u have the time offcourse
Sent from my XT890 using xda app-developers app
just freezes at wipe data, cant format system either, freezes too
anerik said:
just freezes at wipe data, cant format system either, freezes too
Click to expand...
Click to collapse
Even when u wait a little longer?
It doesn't freeze on my phone, it just takes sometimes a little while to get the job done.
Hazou said:
Even when u wait a little longer?
It doesn't freeze on my phone, it just takes sometimes a little while to get the job done.
Click to expand...
Click to collapse
ohh it could be that, i might've waited like 10 secs on the wipe data but less than 5 in the format system
Problem
I just flashed the recovery after using TWRP for a long time and when I tried to wipe the cache the phone froze. I had to manually reset it. I had waited more than 5 minutes and it wouldn't unfreeze. I want to flash Omar roms and i understand i need this recovery, but cant flsh it, any help?
rodrigoauditore said:
I just flashed the recovery after using TWRP for a long time and when I tried to wipe the cache the phone froze. I had to manually reset it. I had waited more than 5 minutes and it wouldn't unfreeze. I want to flash Omar roms and i understand i need this recovery, but cant flsh it, any help?
Click to expand...
Click to collapse
U can use both recovery's to install omars rom. The problem about the long cache wiping is different for each person. Some don't have any problem at all and some do have problems with it. Sometimes it takes a couple of minutes sometimes it wipes in 3 seconds. I dunno why it happens, but when android 4.4 is out with the new kernel i will definitely have another look into it.
Hi guys,
Need your assistance in this. I downloaded the 4.4.2, the Gapps (stock version), and the CWM Touch 6044. Flashed successfully the 6044. Rebooted, and flashed omni 442 and then the gapps. Did a wipe data/factory reset. Then pressed reboot device. The phone will restart and stay stuck at the Omni Logo. No progress from there at all. Did a few other reboots and different combinations to the above but to no result. Stuck there. Finally, did a restore from my backup just to have a phone again..Any idea what I did wrong from the start?
How long did you wait at the first bootup? It took quite long for me, so I'd suggest waiting up to 20 minutes before turning off the phone. Try flashing with the most lightweight Gapps package, that's what everyone seems to be using. You could also try wiping cache and dalvik cache.
Nalefyre said:
How long did you wait at the first bootup? It took quite long for me, so I'd suggest waiting up to 20 minutes before turning off the phone. Try flashing with the most lightweight Gapps package, that's what everyone seems to be using. You could also try wiping cache and dalvik cache.
Click to expand...
Click to collapse
Well, did the Dalvik cache but later on, when I was experimenting. I had waited at least 16/18 minutes till my patience ran out...
Decided to have one more go right now. 1. Did a wipe data / factory reset. 2. After that, wiped Dalvik cache. 3. Presently installing Omni and then will install gapps. 4. Will reboot and leave it to boot until I leave work. (couple of hours from now). And will see what happens.
- Forgot to add thaty in all instances, I selected YES in the "root" question in the end. -
Thanks for replying!
---Update
Nothing changed. Stuck at the Omni logo for about 50 minutes..
The_Sniper said:
Well, did the Dalvik cache but later on, when I was experimenting. I had waited at least 16/18 minutes till my patience ran out...
Decided to have one more go right now. 1. Did a wipe data / factory reset. 2. After that, wiped Dalvik cache. 3. Presently installing Omni and then will install gapps. 4. Will reboot and leave it to boot until I leave work. (couple of hours from now). And will see what happens.
- Forgot to add thaty in all instances, I selected YES in the "root" question in the end. -
Thanks for replying!
---Update
Nothing changed. Stuck at the Omni logo for about 50 minutes..
Click to expand...
Click to collapse
So don't flash gapps and ROM back to back. Flash ROM then reboot and after waiting 5 mins reboot and flash gapps again.
Sent from my LG-P880 using XDA Premium 4 mobile app
Maybe format /system in addition to the factory reset (it's under mounts and storage). So you get a completely clean install
Sent from my LG Optimus 4X HD
Thanks for your advice guys - Unfortunately I don't see any results
I booted in recovery and in this order: Wiped data / did factory reset - then wiped Dalvik - then did format /system - then flashed successfully Omnirom and at the end select YES in the "root" question. Did not touch the Gapps.
Same result - has been in the Omni Logo for more than half an hour.
Can someone tell me the absolute prerequisites needed to install and boot normally? Apart from CWM Touch 6.0.4.4 that is?
Thanks in advance
I really don't see any more required steps to install OmniRom. Did you try another downloaded OmniRom? Maybe something is wrong with your used version.
Sent from my LG Optimus 4X HD
The_Sniper said:
Thanks for your advice guys - Unfortunately I don't see any results
I booted in recovery and in this order: Wiped data / did factory reset - then wiped Dalvik - then did format /system - then flashed successfully Omnirom and at the end select YES in the "root" question. Did not touch the Gapps.
Same result - has been in the Omni Logo for more than half an hour.
Can someone tell me the absolute prerequisites needed to install and boot normally? Apart from CWM Touch 6.0.4.4 that is?
Thanks in advance
Click to expand...
Click to collapse
Select No in the root option.
Sent from my LG-P880 using XDA Premium 4 mobile app
[email protected] said:
Select No in the root option.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That shouldn't do any damage (I tried both ways and didn't notice any difference )
I really think your downloaded ROM zip is corrupt as nobody else having problems with it
Sent from my LG Optimus 4X HD
Omario-242 said:
That shouldn't do any damage (I tried both ways and didn't notice any difference )
I really think your downloaded ROM zip is corrupt as nobody else having problems with it
Sent from my LG Optimus 4X HD
Click to expand...
Click to collapse
Yeah, will redownload - choosing NO also did not make any difference
Did you mount all under mounts and storage?
Coolneng said:
Did you mount all under mounts and storage?
Click to expand...
Click to collapse
all I did under mount & storage is the "format /system". Did not mount anything any other time. Is this part of the procedure too or are we shooting blind here? - Cause directions in the post say flash rom, flash apps, wipe data & reboot, let alone the 15 other combos I've done.
Haven't tried anything yet cause I need to re-download the ROM and presently I can't get any of my 3 PCs "see" the LG's contents like a flash drive. Can only do it in my work's laptop. Beats me why..
If you don't have important data, format internal storage too. No idea for 4.4, but if you flash kdz, this is a must.
Sent from my LG-P880 using XDA Premium 4 mobile app
[email protected] said:
If you don't have important data, format internal storage too. No idea for 4.4, but if you flash kdz, this is a must.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks Black, will try that too. Have everything I need in Helium right now, ready to be restored at any time.
The_Sniper said:
all I did under mount & storage is the "format /system". Did not mount anything any other time. Is this part of the procedure too or are we shooting blind here? - Cause directions in the post say flash rom, flash apps, wipe data & reboot, let alone the 15 other combos I've done.
Haven't tried anything yet cause I need to re-download the ROM and presently I can't get any of my 3 PCs "see" the LG's contents like a flash drive. Can only do it in my work's laptop. Beats me why..
Click to expand...
Click to collapse
It is important to mount everything as far as I know. In my old device's forum it always a step that is specified, I never see it in these forums though.
Try it, you don't loose anything.
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps
panamera2011 said:
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps
Click to expand...
Click to collapse
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.
bfürbanane said:
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.
Click to expand...
Click to collapse
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk
panamera2011 said:
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk
Click to expand...
Click to collapse
Where does it say to install SuperSU? How would that be possible when Android is not booting.
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
I'm sorry but it's really strange, never had installation issues with any version of this rom
Have you tried this kernel to install the rom?
https://www.androidfilehost.com/?fid=24052804347829437
Sent from my H60-L02 using Tapatalk
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Sorry but I confused the message with the MIUI 6.2.12 thread [emoji16]
Sent from my H60-L02 using Tapatalk
AutumQueen92 said:
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.
Click to expand...
Click to collapse
I tried that. I went to samsung-updates.com and downloaded a version that I believe is compatible with my baseband version. Is there any way to check what baseband version my phone has? Then I flashed with odin and was stuck in a bootloop. I then flashed PhilZ recovery and the boot hangs at the samsung logo.
bfürbanane said:
Is there any way to check what baseband version my phone has?
Click to expand...
Click to collapse
Settings>about phone>
IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
The phone is not booting.
IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
Doh! sorry not reading what's in front of me. I did once read that you can get phone number via ADB, maybe the same will work for baseband?
bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..
N00b... said:
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..
Click to expand...
Click to collapse
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.
bfürbanane said:
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.
Click to expand...
Click to collapse
I think i got same problem as you do. Im digging on internet , if i get something ill write here.
Condox18 said:
I think i got same problem as you do. Im digging on internet , if i get something ill write here.
Click to expand...
Click to collapse
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.
same problem
bfürbanane said:
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.
Click to expand...
Click to collapse
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.
Condox18 said:
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.
Click to expand...
Click to collapse
Thanks for the pointer. I subscribed myself to that thread.