Hi Experts,
I recently rooted my phone and installed SuperNexus ROM on it after CWM mode.
I want the Stock JB back on my phone and also unroot the phone. How do I do it ?? Any pointers or help ???
I found this link while browsing..please tell me is it safe to follow this procedure for JB stock rom too.
http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
AnjniG said:
I found this link while browsing..please tell me is it safe to follow this procedure for JB stock rom too.
http://rootgalaxynote.com/galaxy-note-unroot/how-to-unroot-galaxy-note-gt-n7000/
Click to expand...
Click to collapse
Yes, it's safe but I advice you to wipe everything before you go stock.
Flash one of philz's kernels for JB(latest I guess), reboot recovery and then wipe everything. My advice is to wipe cache, system, data, preload, dalvik and even emmc. You will ofcourse lose everything on internal card. After that do a full wipe/factory reset(the one which says install new rom).
Then reboot to download mode, press up and flash stock JB firmware via PC Odin just like in the link.
I followed the procedure in the link and its tuck after samsung logo..just keeps reloading again ad again samsung logo..
what do i do now??
AnjniG said:
I followed the procedure in the link and its tuck after samsung logo..just keeps reloading again ad again samsung logo..
what do i do now??
Click to expand...
Click to collapse
Can you get to recovery? Press Volume Up + Home + Power?
yes I am in recovery
AnjniG said:
yes I am in recovery
Click to expand...
Click to collapse
Ok. Are you in recovery of the stock JB that you were trying to flash?
Or just tell me, what kind of stock ROM did you flash via Odin.
This is stock JB's recovery..I flashed the official ROM for India DDLSC.
AnjniG said:
This is stock JB's recovery..I flashed the official ROM for India DDLSC.
Click to expand...
Click to collapse
Ok. Download this:
http://d-h.st/pM3
Put it on you SDcard and flash it through this stock recovery. Do it and we'll continue when you flash it.
al right done.. whats next
AnjniG said:
al right done.. whats next
Click to expand...
Click to collapse
Ok, now click reboot system and when it tries to boot, hold Volume Up + Home + Power to go to recovery again. This time you should be in Philz custom recovery.
Yes I am in that custom recovery
AnjniG said:
Yes I am in that custom recovery
Click to expand...
Click to collapse
Ok, great. Now you will wipe everything.
Go to mount and storage and:
-format cache
-format system
-format data
-format preload
-format emmc(it will delete your entire internal storage, I do it to really delete everytihng, you don't have to do it if you have important data but I advice it)
Then go back and go advanced:
-wipe dalvik
Then go to wipe/factory reset and select the second one(Install new ROM - this will again format everything).
Get back when you're done.
Yes done that ..what to do next
AnjniG said:
Yes done that ..what to do next
Click to expand...
Click to collapse
Now go to download mode. You can reboot to download somewhere in the menu. Maybe under advanced, or under Philz settings, just find reboot to download.
When it boots, press up and hook up the phone to your computer.
Run PC Odin and you should see a yellow coloured window that says that device is detected.
Now under PDA select your stock ROM md file. Check "Auto reboot" and "F. Reset time" and nothing else.
After all is setup, click Start and wait to complete.
I am doing that.. just a question was that the boot loop issue of stock ROM?
done with odin device is reloading.
Yes it started after taking a bit long time..
I am configuring it now..
I have few questions about it..
Is my device still rooted? If yes how to unroot it.
Is philz recovery still present?
everytime I flash a ROM I will have to wipe everything?
AnjniG said:
Yes it started after taking a bit long time..
I am configuring it now..
I have few questions about it..
Is my device still rooted? If yes how to unroot it.
Is philz recovery still present?
everytime I flash a ROM I will have to wipe everything?
Click to expand...
Click to collapse
You are not rooted anymore and you have a stock recovery, everything is stock. You don't have to wipe everything when you flash a new
ROM, but it is very adviced, also it depends on the ROM you are flashing.
The bootloop probaly occured becouse you were coming from an AOSP based ROM and probably didn't wipe anything.
Thanks mate..you are a real life saver..
you are a dude..thanks a ton for helping me so patiently ..
Next time I will be carefull..
AnjniG said:
Thanks mate..you are a real life saver..
you are a dude..thanks a ton for helping me so patiently ..
Next time I will be carefull..
Click to expand...
Click to collapse
No problem:good:.
Yes, next time you should backup your important data and always wipe everything. That's the most reliable way.
Related
I was on LJ6 and I rooted . When I install the CM9, i am stupid using the CWM to flash .. now no matter which rom i flashed , it still keep looping
I can still enter to CWM and download mode .
Need ur help ... Thanks
minicris said:
I was on LJ6 and I rooted . When I install the CM9, i am stupid using the CWM to flash .. now no matter which rom i flashed , it still keep looping
I can still enter to CWM and download mode .
Need ur help ... Thanks
Click to expand...
Click to collapse
Pc odin
Sent from my GT-N7000 using Tapatalk 2
so you arent bricked then
if you can bet into cwr to install a gb kernel then rstoire if not you wil lneed to use pc odin to flash a rom
Did you wipe cache, dalvik, and factory reset?
Upgrading from GB to ICS will usually loop if you don't reset the phone.
Do not wipe cache, dalvik, or factory reset
In fact, stay away from CWM and use PC-Odin to flash a stock image.
Azeazezar said:
Do not wipe cache, dalvik, or factory reset
In fact, stay away from CWM and use PC-Odin to flash a stock image.
Click to expand...
Click to collapse
I TRY FLASHED THE STOCK ROM KJ6,LA2
it still looping .....
Try this, worked for me
http://forum.xda-developers.com/showpost.php?p=25925185&postcount=46
Richy99 said:
so you arent bricked then
if you can bet into cwr to install a gb kernel then rstoire if not you wil lneed to use pc odin to flash a rom
Click to expand...
Click to collapse
how to install a GB kernel? do i need to find a pre-rooted GB kernel ?
ioluas said:
Try this, worked for me
http://forum.xda-developers.com/showpost.php?p=25925185&postcount=46
Click to expand...
Click to collapse
where did u get the files ?
RickR78 said:
Did you wipe cache, dalvik, and factory reset?
Upgrading from GB to ICS will usually loop if you don't reset the phone.
Click to expand...
Click to collapse
IT WORK AGAIN AFTER
I WIPE THE CACHE,dalvik
IT WORK AGAIN
THANKS SO MUCH
minicris said:
IT WORK AGAIN AFTER
I WIPE THE CACHE,dalvik
IT WORK AGAIN
THANKS SO MUCH
Click to expand...
Click to collapse
oh yeah we understand your emotions
but you did not brick at all in the first place!
title to be changed. \reported
Thread closed
Solution was found, no need for more.
HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD
Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?
still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Can you post call recorder thread link you tried to flash?
Sent with L0VE
baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached
sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE
Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,
sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?
letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India
Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium
i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot
I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium
Hello, since I don't really like my custom rom (remics 1.4) I would like to install back my stock rom (normally the latest gingerbread since I couldn't do any update). But on sammobile I can't find any roms for my country, I'm from belgium. My phone isn't simlocked, I don't know if it has any use to know that?
Btw, my phone is a galaxy s plus (GT-i9001)
Sorry for the double post
abdelbachir said:
Btw, my phone is a galaxy s plus (GT-i9001)
Sorry for the double post
Click to expand...
Click to collapse
Here is a collection of an official Samsung released Roms:
Tutorial how to flash them HERE.
Thanks man, that's really helpful. So I can flash any of those roms without worying about being belgian or anything?
Should i format my phone before flashing those roms?
From my experience you should do a wipe/factory reset before Odin the stock Rom.
I have Odin a stock Rom without wipe and it didn't boot so I cf-root, wipe from recovery and booted.
Sent from my GT-I9100 using xda app-developers app
Ok, so if I understand i should do : Wipe Data, Wipe Cache, Wipe Dalvik Cache and hop, I turn off my phone, go into download mode and flash the stock rom immediatly?
abdelbachir said:
Ok, so if I understand i should do : Wipe Data, Wipe Cache, Wipe Dalvik Cache and hop, I turn off my phone, go into download mode and flash the stock rom immediatly?
Click to expand...
Click to collapse
Exactly!:laugh:
Thanks man, you're a beast, really fast answer
sorry to bother you a bit more, but I prefer to be cautious with all of this, these roms, more precisely the XXKPU one (last in the list) is I think from poland? Does it have any importance? Since I am belgian, i need the french language haha
Oi, guys, I really need help please!! I did wipe data/factory reset in clockworkmod, then i closed my phone and flashed the stock rom (XXKPU) with Odin. But now my phone isn't booting! Or more precisely, It's just the sequence with the "S" appearing that comes over and over again!! What did I do wrong and what can I do please??
abdelbachir said:
Oi, guys, I really need help please!! I did wipe data/factory reset in clockworkmod, then i closed my phone and flashed the stock rom (XXKPU) with Odin. But now my phone isn't booting! Or more precisely, It's just the sequence with the "S" appearing that comes over and over again!! What did I do wrong and what can I do please??
Click to expand...
Click to collapse
Boot into cwm and either wipe data again or your are going to have to flash the stock again. I have had to do that in the past
Sent From My YP-G1 running ICS build 3.5
I tried booting in cwm but I can't, failed like 5 times. A few tries, I got an android robot with some sort of opened box next to him.
abdelbachir said:
I tried booting in cwm but I can't, failed like 5 times. A few tries, I got an android robot with some sort of opened box next to him.
Click to expand...
Click to collapse
This is your WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 it contains everything you need to help you, get a better understanding of your phone
1) 19001 uses Odin 4.43
2) need AriesVe.ops file for flashing
3) IF CWM failed flash CWM 6.0
4) If boot failed flash a i9001 boot loader ( look in My Android collections , link below or use your WIKI)
Thanks a lot man, flashed the cwm in the phone, did a wipe data/factory reset and it works like a charm now. I'll defenitly do a bit of reading to understand my phone a looot better!
I rooted my phone (with app), flashed SuperNexus and few Cyanogen 10 rom, then I felt the Cyanogen 10 rom very lag, so then I decide to flash the stable rom from Cyanogen (Cyanogen 9.1), normally I'll flash thru recovery mode but this time I use the Cyanogen setting, download the rom and update thru it and now my phone stucked at the Cyanogen 9 boot mode, I don't have any usb cable with me right now, is there any way to fix my phone without computer?:crying:
Do you still have access to recovery? If yes, go to mounts and storage and format system, data and cache and install th cm rom again.
nokiamodeln91 said:
Do you still have access to recovery? If yes, go to mounts and storage and format system, data and cache and install th cm rom again.
Click to expand...
Click to collapse
Nope
allandroid1234 said:
Nope
Click to expand...
Click to collapse
Can someone tell me what to do???
allandroid1234 said:
Can someone tell me what to do???
Click to expand...
Click to collapse
Go home, connect to your PC and flash a stock Rom with PC Odin.
ThaiDai said:
Go home, connect to your PC and flash a stock Rom with PC Odin.
Click to expand...
Click to collapse
Okok thanks!
I'll do some research how to do it when I get back to home, really thanks alot!!!!!!!
I've flashed stock firmware with Odin but when my phone reboot it is stucking at SAMSUNG logo screen, what can I do???
allandroid1234 said:
I've flashed stock firmware with Odin but when my phone reboot it is stucking at SAMSUNG logo screen, what can I do???
Click to expand...
Click to collapse
get into stock recovery and wipe/data reset, wipe cache and then then reboot, complete rom set up
rraaka said:
get into stock recovery and wipe/data reset, wipe cache and then then reboot, complete rom set up
Click to expand...
Click to collapse
Before taking the quoted step make sure to be on a safe kernel
Sent from my GT-N7000 using Tapatalk 2
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps
panamera2011 said:
Download Odin, using 3.04 or 3.07 for win 7,8,10
http://www74.zippyshare.com/v/18196321/file.html
Put the devices in download mode (Press volume Up + home + power) and install a stock firmware
http://www.sammobile.com/firmwares/database/GT-N7000/
Guide Odin n7000
http://forum.xda-developers.com/showthread.php?t=1424997
If you want to install a custom rom type CM11, CM12 or CM13 you have to install a kernel compatible with recovery
Install PhilZ recovery, then from recovery install a compatible kernel
Kernel CM11
https://www.androidfilehost.com/?fid=24052804347829437
Kernel CM12
http://forum.xda-developers.com/devdb/project/dl/?id=16862
After flashing the kernel do a
Data factory reset
Wipe cache
Wipe Dalvik/ART
Install ROM, install gapps
If it does not work
Data factory reset
Wipe cache
Wipe Dalvik/ART
Format system
Format cache
Format data
Install ROM, install gapps
Click to expand...
Click to collapse
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.
bfürbanane said:
I did everything you said. Unfortunately, my device is still stuck at the boot screen. There were no error messages while flashing the roms and no other unusual events.
Click to expand...
Click to collapse
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk
panamera2011 said:
This is really strange, try to redo the procedure without installing SuperSU
Sent from my H60-L02 using Tapatalk
Click to expand...
Click to collapse
Where does it say to install SuperSU? How would that be possible when Android is not booting.
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
I'm sorry but it's really strange, never had installation issues with any version of this rom
Have you tried this kernel to install the rom?
https://www.androidfilehost.com/?fid=24052804347829437
Sent from my H60-L02 using Tapatalk
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.
bfürbanane said:
Where does it say to install SuperSU? How would that be possible when Android is not booting.
Click to expand...
Click to collapse
Sorry but I confused the message with the MIUI 6.2.12 thread [emoji16]
Sent from my H60-L02 using Tapatalk
AutumQueen92 said:
Alternatively, Odin a stock rom and look for a philz.zip with compatible baseband. You can enter stock recovery and then flash the philz.zip via update option. This is essentially replacing stock recovery with the custom version. I did this on a naturally occurring bootloop phone and it seems to work, this method also bypasses the yellow triangle warning on boot.
From there, if you want to use other custom roms just remember to wipe /data and /system before installing the kernel, followed by rom itself after a reboot to recovery.
Click to expand...
Click to collapse
I tried that. I went to samsung-updates.com and downloaded a version that I believe is compatible with my baseband version. Is there any way to check what baseband version my phone has? Then I flashed with odin and was stuck in a bootloop. I then flashed PhilZ recovery and the boot hangs at the samsung logo.
bfürbanane said:
Is there any way to check what baseband version my phone has?
Click to expand...
Click to collapse
Settings>about phone>
IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
The phone is not booting.
IronRoo said:
Settings>about phone>
Click to expand...
Click to collapse
Doh! sorry not reading what's in front of me. I did once read that you can get phone number via ADB, maybe the same will work for baseband?
bfürbanane said:
This phone was not rooted prior to being stuck at the boot screen. Actually, it wasn't event stuck at the boot screen. Instead, it turned on and off. I installed PhilZ recovery and was able to backup all files. Then I tried to flash different versions of CM without success. They all get stuck at the boot screen now. No more turning on and off. I also tried to clear cache, wipe dalvik something and reset to factory. Is there something else that can be done? What would be the most likely cause for the failure?
Click to expand...
Click to collapse
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..
N00b... said:
Have you tried a clean install ? Wiping /system and /data partitions then installing a custom ROM .. This option can be found in philz under install a new ROM ..
Click to expand...
Click to collapse
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.
bfürbanane said:
Yes, I tried that. I also tried installing a ROM with a custom kernel that works on my other N7000, but it is still stuck at the boot screen.
Click to expand...
Click to collapse
I think i got same problem as you do. Im digging on internet , if i get something ill write here.
Condox18 said:
I think i got same problem as you do. Im digging on internet , if i get something ill write here.
Click to expand...
Click to collapse
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.
same problem
bfürbanane said:
Good to know that I am not alone with my problem. Right now, I am out of ideas. I tried everything I could think of. I hope you have more luck than me.
Click to expand...
Click to collapse
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.
Condox18 said:
Check this thread, post 3207 http://forum.xda-developers.com/showthread.php?t=1774208&page=321, u may have eactly same problem as me.
Click to expand...
Click to collapse
Thanks for the pointer. I subscribed myself to that thread.