Related
Hi guys,
Im thinking of flasing a custom rom using odin.
Im running stock froyo 2.2.
PDA: I9000XWJPA
PHONE: I9000XXJPP
CSC: I9000XEEJP4
My phone is rooted and lag fixed. I understand that i need to remove the lag fix before and flash.
I updated to this using the registry hack. My questions are as follows...
1) Can i flash a custom rom from stock 2.2 or do i need to firstly flash a kernal with recovery 2e and then flash a custom rom?
2) Am i right in thinking that the PDA is the right bit to be looking at i.e when people say this rom is usable with JPA / JPO etc. The phone and CSC are not important when flashing a custom rom ( but still needed obviously )
3) If by some miracle of god we ever do get 2.3 and i flash back to stock Froyo via odin using a rom from samfirmware.com, will kies recognise my phone? Or will i forever be destined to flash "unofficially" through odin.
4) Looking at the PDA etc given above can anybody recommend a good rom to flash with gingerbread theme and apps. ( i keep seeing Darky's rom popping up in conversations ) and also have a link to it if you would be so kind. Im not lazy but theres so many roms all over i want to make sure i get the right one.
5) Once i have recovery 2e can i flash future roms over the top using rom mananger by clockworkmods and not have to go through odin? Or how does that work?
If i could get some clear answers to the above that would be great.
Yes i am a newbie at this but i am confident that i understand the basics, its just a couple of things above that i want clearing up before i proceed.
I know how to use odin correctly. ( close kies first / make sure odin opened before plugging in phone etc. )
P.S Yes i have 3 button recovery and download mode.
Thank you for taking the time to read this and a big thank you to any body that takes the time to respond with help.
Any body that can help?
dude i feel your pain. i've rooted and installed custom roms on two other phones, most recent the HTC Desire Z. and it was quite a nightmare to just start off to know what the first step is, there are soo many different guides its hard to know which is what and what has now been superceeded by something else!
now i'm trying to get a custom rom on my galaxy S too, but really having a hard time understanding everything becuase guides and stuff are so different for different roms, gets confusing and dont know which one is for me!
my phone is already rooted, i have firmware 2.1-update1, i know i have voodoo lagfix somewhere installed. but my base band version is I9000XXJM4, which i hav'nt seen in any guide! where did you get your seperate PDA, PHONE, CSC info from?
sorry i could'nt help you and i justed added a bunch more questions to mix
also how did you manage to get Clockwork Recovery on your phone? i have recovery 2e atm. i downloaded Rom manager from the market and tried installing Clockwork rewcovery, but first it would not even download. then i tried next day and it downloaded it through rom manager. but i dont think it installed it. i went into recovery mode and then it tried to auto-install clockwork recovery in recovery mode! but it just hanged at zero status bar for like 20 mins. i turned the phone off and on, went back into recovery mode and it was still recovery 2e, how do i get clockwork recovery to flash as the recovery mode?
Type *#1234#into your dial pad and it will come up. If I'm right I believe that 2.1 is more simple to flash over than 2.2 which is the bit that's confusing me.
I believe that you would need to flash a new kernel with recovery 2e and then flash a new Rom over the top.
I'm a but confused though as to weather or not I would need to flash back to 2.1 and then do a couple more flashes to get the job done.
Can some one please clear this up.
Sent from my GT-I9000 using XDA App
1. You don't need to have 2.1 rom to flash, since you'll be able to do all the flashing using Odin and download mode. Just flash a kernel, using odin, that has clockworkmod integrated, and you'll be able to flash most roms and kernels with the clockworkmod.
Speemod kernel is a great kernel, and has clockworkmod included.
Link: http://forum.xda-developers.com/showthread.php?t=822756
2. PDA is the rom part. CSC is important when using stock roms. I think that custom roms have CSC included in them.
3. You'll always be able to flash with Kies by using the Kies Registry Hack or by flashing a stock rom through odin. Kies will recognise your phone even if you are on a custom rom, but I'm not sure if it'll flash your phone.
4. I prefer Docs Ultra Slim roms because it's light, and you can customize them however you want. Darky's rom is a good option if you want all the features of a stock rom, and more. I use a Gingerbread theme with Doc's rom.
Links,
Darky's: http://forum.xda-developers.com/showthread.php?t=814091
Doc's: http://forum.xda-developers.com/showthread.php?t=817703
Both can be installed through ClockWorkMod
5. I think I answered this already.
Thank you for clearing that up. Very helpful but unfortunately you now raised another question haha.
You said that I would always be able to flash through kies using the registry hack... but wasn't that disabled so the registry hack wouldn't work any more a couple of versions back on. 803 or whatever it is?
And you also said that kies would recognise my phone but might not flash it which if I'm reading it right.contradicts.what you said about always been able to flash through kies.
Thank you so much for previous post it was very helpful.
Sorry if I sound stupid for.asking so many questions but I want to make sure I have covered all the angles before I proceed.
Again thanks for taking the time to help.
Sent from my GT-I9000 using XDA App
By registry hack, I really meant the Kies Registry Patcher app found here: http://forum.xda-developers.com/showthread.php?t=835628
Works on all Kies versions at least for now.
Like the original registry hack, this using this app makes Kies think that you have a stock rom and as long as Kies thinks that you have a stock rom, it will flash your phone.
In the sentence where I said that Kies will recognise your phone but won't flash, I mean't that it wouldn't flash without the Registry Patcher.
Thank you sooooooo much for your help dude.
Sent from my GT-I9000 using XDA App
I am in desperate need of help you guys! I screwed up so hard that I don't even know where to begin...
THE SITUATION:
-Right now when I go to turn on my phone, it will only stay on the current SAMSUNG GALAXY S I9000 screen (the very first screen when booting your phone) and it keeps flashing in and out.
Before trying to use Odin to put back the original Kernal on my phone, it was just stuck as the SAMSUNG GALAXY S I9000 screen, still wouldn't start. <I followed this website step by step>
http://www.samsunggalaxysforum.com/...-to-a-stock-rom-after-installing-darky's-rom/
BEFORE ALL OF THIS EVER HAPPENED:
I finally rooted my phone and manage to download Clockworkmod recovery on my phone and then used it to flash Darky's 10.2 custom ROM. Everything turned out great except at the beginning of the boot, the screen turned all rainbow coloured, completely distorted, and it continued to do that. I then tried to go back to Recovery mode to do the Voodoo lagfix but I couldn't even get into the recovery mode anymore, it either wouldn't let me, or it did but the screen didn't go to it properly (more likely the first one). I read somewhere that if you reflash your phone again, it should make all the tweeks go away. So I tried that from the Darky's tools menu and ever since then, I've been stuck with the Boot Screen this whole time...
I already bricked my phone once, and that was before the Flashing Boot Screen.
I really need help you guys, I would at least like to have my phone back to the original basis, at least! Your help would be greatly appreciated!
THANK YOU
P.S. (i'm not that great at all this phone tweeking, but I've succeeded in doing it up until yesterday)
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
gfacer said:
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
Click to expand...
Click to collapse
Yes, I can get into download mode! (thank you for reading my post).
If it's not too much to ask, could you maybe find the ROM that would be good for me to flash, considering my situation?
I want to be sure that it's what the top tech guys would recommend
A link would be appreciated
thank you again!
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
gfacer said:
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
Click to expand...
Click to collapse
So in essence all I have to do is flash the Darky ROM V10.2 with Odin using the Download mode on my phone and it should be okay?
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well...I did everything you said. The ROM is on there alright, it flashed and everything (And I know this because now when the boot screen STILL FLASHES, the darkcore & darky's rom logo are on it too).
THIS TIME AROUND:
The stock recovery seems to work...
any ideas??
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Alright I'll try and reflash the same one using a different version of odin the. I'll let you know what happened
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
tried ezodin, flashed it, and i still get the exact same thing I've exhausted every single possibility there is!!!
I really need help on this, my warranty is not gonna do anything because i have the phone rooted..
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
gfacer said:
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
okay that could be useful data potentially (let's hope it won't have to be).
If you didn't see my reply from the other thread, here it is:
Once I rooted my phone, I automatically went from Stock Froyo to Darky's 10.2 extreme edition. It worked and everything except for that color disfiguration and the clockworkmod recovery not working.
It's weird because after I flashed my first darky's rom, i checked the phone and it said that the firmware version was 2.3.X (I believe X may have been 4). So from what you're saying, I don't exactly think it has anything to do with the fact that I went straight from froyo stock to GB darky ROM.
So are you saying that I should flash darky's 9.3 for Froyo and THEN flash the latest version?
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Ok, so just to be 100% on this
-I should flash Darky's 9.2 froyo onto my phone,
-then I should flash regular GB onto my phone (Not sure about the bootloader part though, if you could clarify that)(Also where would I get JUST a stock GB ROM?)
-then I can flash a custom GB ROM?
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
roma17 said:
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
Click to expand...
Click to collapse
I think you are right but other than trying again and again, which I've done before -though now I know why I had too - I am out of suggestions. Good Luck and if I have a brainwave I'll let you know.
Sent from my GT-I9000M using XDA Premium App
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
gfacer said:
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
Click to expand...
Click to collapse
Okay, basically at this point, I just want my phone to work I've tried what you said. I remember that before rooting my phone initially I was running Froyo 2.2.1. So I found the ROM for that ( http://www.samfirmware.com/WEBPROTECT-i9000.htm ) Just like you said. I downloaded from the *Provider Samsung Galaxy S i9000 heading and picked the I9000BOJS5 ## from February 2011 because I think somewhere around there I updated my phone to Froyo. Flashed it, did everything, still no luck.
I've had a recent hunch though. When the bootscreen boots up, it keeps saying i9000 only, when before it used to say i9000M at least for a little bit (yes my phone is i9000m). Is there a stock froyo rom that's specifically designed to go with the i9000m model? Or are they just all the same?
Never give up
-Thank you so much
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Rhiannon224 said:
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Click to expand...
Click to collapse
Here is the info:
Firmware: 2.3.3
Baseband: I897UCKF1
Kernel: 2.6.35.7-I897UCKF1-CL273832
Build: GIGERBREAD.UCKF1
^ From the looks of what u posted, it looks like u have the leaked i897uckf1 currently on ur phone. If that is the case, then u could Odin the Cognition Beta 2 Kernel and then flash the latest Cog Rom (having already copied it to ur internal sd).
Just flash the kernel through Odin then use button combo (volume +/- and power...release after u see the at&t screen) to get into CWM 4.0.0.5 and flash Cog 5 v 1.00 from there.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Are you plugging into a usb port in the back of your pc? Also, there are several methods for flashing back to stock now, once you upgrade to GB bootloaders you don’t ever want to use the Odin with the button fix because it will only flash the secondary bootloader and the primary bootloader will remain GB and the result will be a hardbrick. Also, some of the newer builds came with Froyo installed and using the older 1 click Odin by DesignGears will put those devices in a bootloop. So it really is dependent on your device and your needs. I now use the method outlined in the Continuum 6.1 thread which will not touch the bootloaders and brings you safely back to 2.1 stock. I always clear user data and cache in recovery, flash back to stock using Cezar's method (not a 1 click) prior to flashing a new Rom. Most devs recommend flashing to stock first because there is less chance of corruption.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
http://www.youtube.com/watch?v=UOyx5JQ_8_I
MobileTechVideos video is how i flashed my first gingerbread ROM. Its easy, straight forward and he has all the links you will need under the video.
piece-a-cake
Gupone said:
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
Click to expand...
Click to collapse
Listen, I'm new at this and learned watchin mobiletech videos from youtube. At first I found it hard but now is pretty easy (in my opinion). The first thin I do is back up apps with titanium and paste to my laptop (for me is faster to install them back), go back to stock 2.2, master reset using dialer (no odin), root, reboot, install rom on sd card, using odin i install bootloaders (I9000), flash talon kernel (odin), flash rom (CWM) and reboot. That's how I do it. Now, I could b wrong but doing it that way, in that pattern works for me. Like I said, I'm new at this but trust me....I've done it several times and it works for me. Keep reading and then decide how you want to do it. Good luck..."HONESTLY"!!!
It all depends on where you are now and where you want to go.
Sent from my SGH-I897 using XDA App
I'm new to all of this and have done a good amount of research but seems like the information never ends and there are a few ways to load a custom rom.
Method one
BACK UP!!!
Flash to stock (FTS)
Wait for your phone to reboot and then re-enable debugging
Hook phone back up to pc and Master Clear (MC) using Odin
Load Clockwork update.zip (DOWNLOAD)
Load FireFly_X-X.zip to phone memory
Remove sim and external SD, and unplug USB
Boot into recovery and reinstall packages (You may have to reinstall packages twice to get to Clockwork recovery)
Once in Clockwork recovery (Green Text), select install zip from SDcard
Next select choose zip from sdcard
Scroll down to FireFly_X-X.zip and select the file
This will run the script and install the ROM to your phone
After this is done, select go back and then select reboot phone
This may take a while, so leave your phone and go grab a snack!
Method 2
Load ROM file onto phone
Boot into recovery
Select ROM and flash it
Reboot, wait and enjoy
Wash, rinse, repeat!
What are the differences? Which one is better?
Seems like the first video is very simple and straight forward?
Am I missing something here? I'm already rooted and used titanium backup.
I'm on 2.2 Froyo and wanting to flash to Firefly 3.0
Thanks!
Hi everyone, I am brand new sgs owner and first time smart phone user and I upgraded my phones firmware on kies to 2.3.3 / baseband xxjvo / build number gingerbread.xwjvh
I been talking to a few people that have got 2.3.4 and cyanogen mod 7. And I really want to get one of them because my battery life is pathetic on 2.3.3
I have an idea how to do it (I have watched alot of tutorials) but what is confusing me is all the different downloads like cwm and speed mod, kernals, ROMS. All these terms are driving me mad as I dont know if I need to flash this stuff first to upgrade the firmware.
I have been told I may or may not need to root my phone to make it all work because of the current firmware xxjvo 2.3.3?? So what do i do?
Can I just flash a new firmware on via odin? or do i need to flash diff kernals or clockwork mod or speed mod what ever they are to make it work properly.
Im sure its all easy enough once its understood but I cant find basic explanations for all these terms.
I really dont want to mess up my phone but i know I can get this done once i know how.
So could someone that knows please tell me once off, what do I have to do to upgrade from gingerbread 2.3.3 xxjvo to something better like cm7 or 2.3.4.
Do I need to root first? install CWM or speed mod or whatever.
Also what is CWM and speed mod. are the roots?
Sorry for not knowing anything as i said its my first smart phone and I want to get to know how to use it to its full extent
Will greatly appreciate any advice/ help given.
If some ones going to help me could they post the links to the downloads that i will need.
Thanks very much
1.its simple root ur fone first via odin and then flash the voodoo/fugumod lagfix(incase ur experience any lag)
2.Download Rom Mgr premium and download (cyanogen mod7 ,nightlies or watever)
3.Take a backup using Mybackuppro or titanium backup before u flash cm7
4.Go to Rom Mgr Premium and then install the rom of ur choice and also make sure u check GAPPS(if u want gmail, market an all crap)
I m a newbie 2 Galaxy S myself, but i have quite som experience on rooting other fones
darkkid85 said:
1.its simple root ur fone first via odin and then flash the voodoo/fugumod lagfix(incase ur experience any lag)
2.Download Rom Mgr premium and download (cyanogen mod7 ,nightlies or watever)
3.Take a backup using Mybackuppro or titanium backup before u flash cm7
4.Go to Rom Mgr Premium and then install the rom of ur choice and also make sure u check GAPPS(if u want gmail, market an all crap)
I m a newbie 2 Galaxy S myself, but i have quite som experience on rooting other fones
Click to expand...
Click to collapse
Thanks for the reply but what is rom mgr? and must i pay for it if its premium
And what is the download for the correct root I have seen a thread by chainfire with hundreds of root downloads but I dont know what one to use.
Is a ROM the same thing as a firmware?
sgsnoob325 said:
Thanks for the reply but what is rom mgr? and must i pay for it if its premium
And what is the download for the correct root I have seen a thread by chainfire with hundreds of root downloads but I dont know what one to use.
Is a ROM the same thing as a firmware?
Click to expand...
Click to collapse
go to market- download rom mgr( dl Premiu m if u wanna support the dev)
1.From Rom Mgr-Download rom-Dwnload watever u want
Alt way to flash a Rom
1.Downlaod cyanogen mod7 or watever ( from one of the sites) and dump on ur Sd card ( My S does not have a SD ) and once ur in recovery apply update from zip card 2 flash the rom
darkkid85 said:
go to market- download rom mgr( dl Premiu m if u wanna support the dev)
1.From Rom Mgr-Download rom-Dwnload watever u want
Alt way to flash a Rom
1.Downlaod cyanogen mod7 or watever ( from one of the sites) and dump on ur Sd card ( My S does not have a SD ) and once ur in recovery apply update from zip card 2 flash the rom
Click to expand...
Click to collapse
so I dont need to use odin at all??
Do I still need to root the phone before I can flash cm7 from sd card? Do I put it on internal or external sd card? And If so what root do I use for my particular firmware
Anybody? ? Someone must be able to help me
Here are some posts I think will help u find some answers,
Download mode is HOME BUTTON+VOL DOWN+POWER BUTTON
Recovery mode is HOME BUTTON+ VOL UP+POWER BUTTON
1 Android ROM and rooting dictionary: all the terms explained
2 A link explaining how to flash a custom Rom via Odin and their downloads.
3 Deodexed Stock roms
Hope this helps. By the way all these are custom rom lists and not samsung stock firmware.
DonVito2020 said:
Here are some posts I think will help u find some answers,
Download mode is HOME BUTTON+VOL DOWN+POWER BUTTON
Recovery mode is HOME BUTTON+ VOL UP+POWER BUTTON
1 Android ROM and rooting dictionary: all the terms explained
2 A link explaining how to flash a custom Rom via Odin and their downloads.
3 Deodexed Stock roms
Hope this helps. By the way all these are custom rom lists and not samsung stock firmware.
Click to expand...
Click to collapse
Thank you for the reply. Is cm7 a custom Tom?
How safe is it to use a custom rom instead of a Samsung rom.
Can some one tell me is there a particular order I need to follow to upgrade my phones firmware.
Like root then something else followed by the firmware.
Could I upgrade from xxjvo without rooting?
Again sorry all the questions I feel like a dumbass.
Thanks
Double post
Again sorry for being persistent but could someone give be a step by step quire to upgrading my current firmware xxjvo 2.3.3 to something better for battery and better radio signal.
Must the phone be rooted first? Must I install anything else before or after the new firmware
Thanks
Hi, check out samfirmware.com to download stock 2.3.4
I'm on the newest jvr, and my battery is good.
It's also flash manuals there for how to use odin.
thats the safest!
If you want root permission, you can flash cfroot kernel after the rom.
Edit: i'm on the oldest 2.3.4 jvr, looks like it came a new relese today.
Sent from my GT-I9000 using Tapatalk
RobertSand said:
Hi, check out samfirmware.com to download stock 2.3.4
I'm on the newest jvr, and my battery is good.
It's also flash manuals there for how to use odin.
thats the safest!
If you want root permission, you can flash cfroot kernel after the rom.
Edit: i'm on the oldest 2.3.4 jvr, looks like it came a new relese today.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Is a specific ROM needed to run a different firmwares? or vice verse?
If I flashed 2.3.4 does that mean I have a new ROM or new firmware or both?
thanks
Pls do refer my previous post for upgrading to 2.3.4 GB roms (2)
2.3.4 roms are way better for battery. There are some light weight roms with excellent battery life eg SURFACE,Matrux rom, Juwe's Smart Edition(My Pick) etc
You dont need to be rooted to flash a custom rom via ODIN.
CM7 is a custom rom and I would recommend it only if you know what u r doing. Its not very advisable for a noob (imho).
There is insanity cm7 034 with gb boot loaders [ROM] insanity CM 034 [16.08.2011] - Multi DPI But its in heavy dev stage. Pls go through their thread before flashing it.
Here is the EZBOOt link
Install or upgrade at your own risk.
help me to upgrade galaxy s
anybody is there for help me
My final goal is to flash Slim ICS, which I've done on quite a few galaxy s1 i1900 phones.
Here things went awry..
I'll try and keep this short - I tried something which did not work, have gone through the "phone--!--Computer" stage, flashed an AT&T stock rom through Odin hoping to be able to root it, install rom manager and CWM recovery and install my desired rom. This did not work.
On this AT&T rom I can't even find rom manager in the play store.
What I'm looking for is a way to flash a rom and kernel via Odin, preferably rooted, so that I can then flash recovery and so forth...
Any suggestions will be most welcome!
Thanks
Why not use TRusselo's Flashing Guide ?? It is up to date. :thumbup:
There is no need to get Root first in order to flash a Dev Rom.
Sent from my SAMSUNG-SGH-I777 using xda premium
Thanks very much for the link! I've searched quite a bit before posting but couldn't find anything relevant.
I'll go over it and try, fingers crossed.