Database Develop

[Tool] VS920 Repair Utility

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This utility will help you recover your IMEI / MEID from a bad flash.
WARNING:
This software only allows you to write to the device if the IMEI / MEID is zero'd out or does not contain anything.
DO NOT WRITE SOMETHING YOU DON'T WANT. IF YOU WRITE THE WRONG IMEI / MEID YOU ARE SCREWED.
I do not condone changing / modifying / tampering with the serial IT IS ILLEGAL. It is however legal to recover the original one, that is what this software will allow you to do.
I will not answer PM's because you typed the wrong serial number or because you tried something you shouldn't have. This is a fair warning. Make sure you type your original serial number in correctly the first time. Both boxes must match.
[How To Use]
1.) Plug device into computer.
2.) Select Internet Connection Mode, select Modem.
3.) Open device manager to see what COM your device is on.
4.) Open software and select the COM, there is two the device will connect on, you only need to write the information to one of them.
5.) Click on Connect.
6.) Type/Paste you're MEID/IMEI, verify it before you click Repair.
7.) Verify again.
8.) Click repair, wait for software to reboot your device.
9.) If the phone doesn't reboot after 1 Min, go ahead and reboot your device.
10.) Enjoy your ICS rom on your working VS920 device.
[Problems]
Q.) What do I need in order to run the software?
A.) Just dotnet 4.0
Q.) Where do I get my IMEI/MEID ?
A.) Remove the back, then remove the battery. There is a white sticker that say's IMEI. Type the whole string in the top box ignoring the last number its a checksum, you will see the last number being calculated on the IMEI field. Make sure it all matches up.
Q.) I didn't listen/read what you wrote about the 1 time write.
A.) I can't do anything for you.
Q.) The application is throwing an error.
A.) Please take a screen shot, and copy the error then paste here.
Q.) The application just randomly quites.
A.) Stop trying to log what the application is doing, quit any debuggers and try to open the app again.
Q.) My antivirus is picking this up a a virus/torjan why?
A.) Most antivirus suck anyway, they scan on the pe header of the file. If its unable to process it, it will automatically flag the program as a virus. I assure you there is no virus. All my software gets protected low level to prevent tampering with.
Q.) Was the license agreement really needed, its annoying!
A.) No it probably wasn't but to protect me, FTT, and XDA-Developers then yes. I put that there you are fully aware that it is an as is software and you are agreeing not to reverse engineer the software as well as agreeing that you are doing this at your own risk.
Video
How it works
Now while I tested this over and over on my two test devices and they work fine. This doesn't mean that it works fine on every machine. I built the app in less then a day. I have added as many checks as I can so it wont mess anything up.
DotNet Framework 4.0 Is needed.
Download Here
VS920 MEID Repair Utility 1.0
MD5 Sum
Exe: 142882a5de3ae3204704626933522fdc
Rar: 48dd4ab56710ce901af9e2e067d11e1f
DO NOT REPOST THIS ON ANY OTHER FORUMS, DO NOT LINK TO THIS FROM OUT SIDE OF XDA. I MONITOR ALL TRAFFIC ON THIS SITE. I WILL PULL THE FILES IF I HAVE TO.

Reserved for later use if i need it.

I'm getting a 404 on that link.

Link is fixed.

I would love for some success or fail stories, some feed back as well. Hopefully all success stories , but I know that never happens lol.
If I have helped you at all please don't forget to say thanks.

The rar file tested ok with 7Z.
I tried to download dotnet 4.0 and my Win7 64 bit machine asked if I wanted to re install it.
The program crashes before it opens.
A popup askes to check the web for a fix.
EDIT:
You sure that was Internet Modem, or Ethernet?
EDIT:
Fail either way.

Same results here. Also what language was this built in?

Hmm can you post a screen shot of the crash. Ill have to check it out. I have another machine ill run it on right now.

Wow I'm an idiot
No wonder it crashed.
dotNet 4.5 ughh...
You can try to install 4.5 if you want or ill have to recompile later tonight.

Application Crash
Code:
Faulting application name: VS920 MEID Repair Utility.exe, version: 1.0.0.0, time stamp: 0x4fc6f0df
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e211319
Exception code: 0xe0434352
Fault offset: 0x0000b9bc
Faulting process id: 0x2224
Faulting application start time: 0x01cd3eef4903a23f
Faulting application path: C:\Users\Blake\Desktop\VS920 MEID Repair Utility.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 874a351a-aae2-11e1-9249-f1c420cf0b5b
And the .Net crash
Code:
Application: VS920 MEID Repair Utility.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.TypeLoadException
Stack:
at System.ModuleHandle.ResolveMethod(System.Reflection.RuntimeModule, Int32, IntPtr*, Int32, IntPtr*, Int32)
at System.ModuleHandle.ResolveMethodHandleInternalCore(System.Reflection.RuntimeModule, Int32, IntPtr[], Int32, IntPtr[], Int32)
at System.ModuleHandle.ResolveMethodHandleInternal(System.Reflection.RuntimeModule, Int32, System.RuntimeTypeHandle[], System.RuntimeTypeHandle[])
at System.Reflection.CustomAttributeData..ctor(System.Reflection.RuntimeModule, System.Reflection.CustomAttributeRecord)
at System.Reflection.CustomAttributeData.GetCustomAttributes(System.Reflection.RuntimeModule, Int32)
at System.Reflection.CustomAttributeData.GetCustomAttributesInternal(System.Reflection.RuntimeAssembly)
at System.Reflection.RuntimeAssembly.GetCustomAttributesData()
at System.Reflection.CustomAttributeData.GetCustomAttributes(System.Reflection.Assembly)
at System.Resources.ManifestBasedResourceGroveler.GetNeutralResourcesLanguage(System.Reflection.Assembly, System.Resources.UltimateResourceFallbackLocation ByRef)
at System.Resources.ResourceManager.CommonSatelliteAssemblyInit()
at System.Resources.ResourceManager..ctor(System.Type)
at System.ComponentModel.ComponentResourceManager..ctor(System.Type)
at ?1?.?3?.?28?()
at ?1?.?3?..ctor()
at ?1?.?7?.?67?()

amoamare said:
Hmm can you post a screen shot of the crash. Ill have to check it out. I have another machine ill run it on right now.
Click to expand...
Click to collapse
I used 7z to test the archive before I tried to run it.

TypeLoadException is thrown when the common language runtime cannot find the assembly, the type within the assembly, or cannot load the type.
My visual studio decided to default 4.5 framework. So until I can recompile, might just need to install dotNet 4.5
Dotnet 4.5 Beta Download link

EEEW a beta? Just kidding.
No problem, thank you for working so hard at this...

No problem.
4.5 is actually pretty stable for being a beta. I've been running it for months now with no issues that I noticed. Then again i'm on my dev machine and it hardly has issues :S except for it doesn't like wireless keyboards and mouse's ha.

Well it looks like it would do the trick.
It ran through all the motions.
Except I haven't tried the ICS update.
I was thinkin of waiting for a .bin file instead of trying to figure out where the hell the Phone Booth could be found.
I have little doubt that this will work for those that wave gotten stuck with the peek a boo IMEI.
Now if you had the time to work out something for my poor LG Fathom.
It got a case of amnesia or something.

cac2us,
If you wan't to try the ICS update, I can team view with you and show you how to use LGNPST in order to flash the .tot. Its pretty simple once you see it the first time.
People that are having Google Play Store issues and no 4G and Intermittent 3G is because there IMEI is zero'd out. I can log into the play store fine, use my internet fine etc, but when I zero'd my IMEI and MEID out it wouldn't download my e-mails or anything, I couldn't log into the play store it would just freeze.
Whats wrong with your Fathom?

Thanks, but if the only way is to use download mode, that's what killed my fathom's MEID.
So,... aw what the hell.
If I put it in download mode then the .tot file should get accepted?
And where the hell is that Phone Booth folder that I read about?
Fahthom got flashed too many times.
And in download mode. Then I spoofed at to be an HTC 6800, and now it won't change back.
I might have to pay the $99.00 for the newer Workshop to write it back.
Maybe if I send it to you along with a bucket of cash, and the box it came in you could maybe fix it?
That Google play store issue makes sense, just like my fathom won't activate without an MEID or an IMEI.

You don't need to flash in download mode.
Connect the phone to the computer, select internet for the connect and then select modem.
Make sure you have registered the dll regsrv32 "Path to dll";
After that open LGNPST you should see that it shows the model VS920. Click on the Phone settings button, then click read. Make sure it reads everything correctly. Close out of phone settings.
The Port will flash to say its done click on it to reactive the port.
Select upgrade and click browse.
Now in the window that pops up, down at the bottom where you can select a file. Don't worry about what it says. The box above it where you can type the location enter in *.* then click enter.
This will display all files. Now select the .tot file. "You can also rename .tot to .bin" once you select the file, click on upgrade. The flash should succeed fine now..
The reason people have crashing issues is because they would go to "Phonebook" section in the software and use that. The phonebook backup/restore is not used for upgrading the phone.
Also to answer your question, yes I could most likely repair it for you. No cost, just pay for shipping here and back.

OK, I'm ready to do it.
The only part "Make sure you have registered the dll regsrv32 "Path to dll";"
Isn't that file in the Windows\System32 folder?
How do I register it. I allready did the right click thing for the 920.dll while it sits in the Models folder of LGNPST folder.
I will PM you with the details of the Fathom.. Thanks..

Yes if your using the right click register, and you right clicked and registered and it returned with succeeded then the dll is registerd and your are good to go.

[TUT] Unlocking 262-000 bootloaders

Alright, so let's start the fun
These are the steps i did for successfully unlocking my BL.
I can't and won't guarantee that theese steps are going to work for you. please report back here if it worked for you or not and please post also the buy-date of your phone
it might be possible that this works for other firmwares too, please try and report back here thanks
Requirements
- a Linux distro (mine is Xubuntu 12.10, but should work on every Linux OS)
- a working and updated ADB (for installing ADB, search for tuts here on xda )
- a unlockable firmware (preferably ANEUBK)
- be willing to recycle all your warranty papers
- and most important: a brain with the ability to read
The steps
1) charge your phone to 100%
2) connect your phone in LG software mode
3) if you have the path to your adb defined, then goto 3a). if not, then goto 3b)
3a) open a terminal and type
Code:
adb reboot oem-unlock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3b) open a terminal and type
Code:
cd ~/android-sdk/platform-tools
(if you've installed the android-sdk in your home directory under "android-sdk". if not, change it to the directory you've installed it)
then type
Code:
adb reboot oem-unlock
4) now you should see this on your phone:
do i wanna unlock it? of course i do so press the vol + button ATTENTION: there is no further warning, your whole /data/ partition will be formatted!!!
5) now you should see this, and your BL is unlocked and your /data/ partition is wiped
6) now pull out your usb cable and your battery, too
7) put your battery back in and boot
8) set up your system
9) now go to the hidden menu and check your BL status (dialer: 3845#*880# --> Bootloader Unlock Check --> Bootloader Unlock Check --> Unlock)
10) do the harlem shake and be happy about your unlocked BL
and please, don't post "thanks" if i've helped you, just hit the thanks button

Does it applies on 234 devices too? I ll not have access on a linux pc till monday!

Cool dude, thanks.
Do you think its possible to do this with those bootable Linux OS cd (so i dont have to install linux on my hd just for dooing that) ?
Do you loose the unlocked BL if you install another KDZ after the unlocking?

Someone know why not working on every windows?
I have the android sdk installed and the same procedure worked for me without linux.

nikosblade said:
Does it applies on 234 devices too? I ll not have access on a linux pc till monday!
Click to expand...
Click to collapse
i honestly don't know try it, like i've said, give it a try and report back
profyler said:
Cool dude, thanks.
Do you think its possible to do this with those bootable Linux OS cd (so i dont have to install linux on my hd just for dooing that) ?
Do you loose the unlocked BL if you install another KDZ after the unlocking?
Click to expand...
Click to collapse
hmmm, possible? maybe, but this would be extremely slow, cause you've gotta get adb working first and so on. so i'd say it won't work, but not sure.
but some distros have got the ability to install them as a "windows prog", this creates a virtual harddrive where linux can be booted from, so no need for reformatting the hdd just google about it
some users reported that it will not be lost after flashing a kdz. but also here: not sure, cause i haven't tried it myself yet (my BL is now unlocked for about 3h yet )

verlol said:
Someone know why not working on every windows?
I have the android sdk installed and the same procedure worked for me without linux.
Click to expand...
Click to collapse
i guess it is driver related... what firmware do you use? german or euro-open?

laufersteppenwolf said:
View attachment 1861354
Click to expand...
Click to collapse
This "final" screen I can confirm on my 262-000 from Amazon. I used Windows and http://forum.xda-developers.com/attachment.php?attachmentid=1859693&d=1365149301 for the ADB driver but the same method. It takes like 2sec to do! I installed CWM etc. fine afterwards!! Thank you!

Security error
I don't get the screen like in 4)
I just get Security Error, any ideas?

Don't work with ADEUBK 262 000
I can only unlock with the china 20a.

mrlollog said:
I don't get the screen like in 4)
I just get Security Error, any ideas?
Click to expand...
Click to collapse
This is not universal, seems with latest update LG showed some mercy on German users...rest can feel screwed all over again
F*ck you LG retards they are only good if Google screws them good, who's your papa :silly:

On 234 this didn't work with Linux and the leaked 20A.
I might try later to update the phone (GBR) with the official one but I wouldn't hold my breath.
Sent from my Nexus 7 using Tapatalk 2

laufersteppenwolf said:
i guess it is driver related... what firmware do you use? german or euro-open?
Click to expand...
Click to collapse
I use euro-open.
If its driver related, which driver is needed?
I only know of the Google USB Driver for the Android Composite ADB Interface.

Not works (on linux vitural machine ) The pone says ... Lg Security error...

me too

I do not get unlock

tiflao said:
Not works (on linux vitural machine ) The pone says ... Lg Security error...
Click to expand...
Click to collapse
same here, on win or on vm i got this error ...... (262-00)

when you get " Lg Security error..." is the phone bricked or you just need to pull the battery and reboot and than its fine again?

DavidXanatos said:
when you get " Lg Security error..." is the phone bricked or you just need to pull the battery and reboot and than its fine again?
Click to expand...
Click to collapse
The Phone reboots after ~5 secs.

laufersteppenwolf said:
Alright, so let's start the fun
These are the steps i did for successfully unlocking my BL.
I can't and won't guarantee that theese steps are going to work for you. please report back here if it worked for you or not
it might be possible that this works for other firmwares too, please try and report back here thanks
Requirements
- a Linux distro (mine is Xubuntu 12.10, but should work on every Linux OS)
- a working and updated ADB (for installing ADB, search for tuts here on xda )
- a unlockable firmware (preferably ANEUBK)
- be willing to recycle all your warranty papers
- and most important: a brain with the ability to read
The steps
1) charge your phone to 100%
2) connect your phone in LG software mode
3) if you have the path to your adb defined, then goto 3a). if not, then goto 3b)
3a) open a terminal and type
Code:
adb reboot oem-unlock
View attachment 1861346
3b) open a terminal and type
Code:
cd ~/android-sdk/platform-tools
(if you've installed the android-sdk in your home directory under "android-sdk". if not, change it to the directory you've installed it)
then type
Code:
adb reboot oem-unlock
View attachment 1861348
View attachment 1861349
4) now you should see this on your phone:
View attachment 1861353
do i wanna unlock it? of course i do so press the vol + button ATTENTION: there is no further warning, your whole /data/ partition will be formatted!!!
5) now you should see this, and your BL is unlocked and your /data/ partition is wiped
View attachment 1861354
6) now pull out your usb cable and your battery, too
7) put your battery back in and boot
8) set up your system
9) now go to the hidden menu and check your BL status (dialer: 3845#*880# --> Bootloader Unlock Check --> Bootloader Unlock Check --> Unlock)
View attachment 1861355
10) do the harlem shake and be happy about your unlocked BL
and please, don't post "thanks" if i've helped you, just hit the thanks button
Click to expand...
Click to collapse
Thanks for the tutorial - but can you explain why is this just working on a Linux OS ? I mean what's the difference between trying to unlock the BL on a Win7/8 OS or a Linux OS ?
THanks

DavidXanatos said:
when you get " Lg Security error..." is the phone bricked or you just need to pull the battery and reboot and than its fine again?
Click to expand...
Click to collapse
Sometimes is semi-bricked, specialy after the "morning-call empty"
Don't worry, re-flashing will solve the problem.

Repair Corrupted/Invalid IMEI/No Signal

Requirements:
*) Phone with unlocked boot loader.
*) Windows PC (preferable win7)
*) IMEI and S/N writer tool
*) Drivers of CND and our mobile drivers installed
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....MAKE SURE YOU SELECT PROPER COM PORT. CHECK IT IN YOUR DEVICE MANGER. MY COMPUTER-->PROPERTIES-->DEVICE MANAGER-->PORTS AND COMS. NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....
Download All in One Zip
​

Reserved
Sent from my Micromax AQ4501 using XDA Free mobile app

Shrihari007 said:
Requirements:
*) Phone with unlocked boot loader.
*) Windows PC (preferable win7)
*) IMEI and S/N writer tool
*) Drivers of CND and our mobile drivers installed
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....MAKE SURE YOU SELECT PROPER COM PORT. CHECK IT IN YOUR DEVICE MANGER. MY COMPUTER-->PROPERTIES-->DEVICE MANAGER-->PORTS AND COMS. NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....
Download All in One Zip
​
Click to expand...
Click to collapse
What's CND
Sent from my A1 using XDA Free mobile app

Error while installing Cds Drivers
Error = the third party INS does not contain digital signatures or something like that Plz help OS = 8.1

For windows 8.1/8.1 Disable driver signature enforcement checking....
How to here :
https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8

Now on Window 7 it says enter meta mode failed
Hi
i Switched form 8.1 to window 7:crying: just for this method but in window 7 i installed every driver but when i connect my device the imei writter says enter meta mode failed:crying::crying::crying::crying::crying: and there is mmx logo on my A1
what to do bro guid plz!

Select correct com port
Sent from my Micromax AQ4501 using XDA Free mobile app

Code:
Steps:
1,Please power off the phone
2,Then plug in the USB cable
USB Bootup
Meta_DB Init Start:
Meta_DB Init PASS
Enter to ModemMeta Start:
Enter to ModemMeta Fail:
It is over !!
Error Message : Falied to enter meta mode.
Other than that CDC driver does not show up in the device manager either.
Any help please?

Please Help Mine Same Problem
mine too same problem what can i do
if you"ve fixed this problem plz tell me please help..!!!!!!!! I Am ****ed Up
PLEASE HELP................!!!!!!!!!!!!!!!!!!!!!!!!!!
please.!!!! reply:crying::crying::crying::crying:
:crying::crying:
Saatvik Shukla said:
Code:
Steps:
1,Please power off the phone
2,Then plug in the USB cable
USB Bootup
Meta_DB Init Start:
Meta_DB Init PASS
Enter to ModemMeta Start:
Enter to ModemMeta Fail:
It is over !!
Error Message : Falied to enter meta mode.
Other than that CDC driver does not show up in the device manager either.
Any help please?
Click to expand...
Click to collapse

Me too had same problem..... All you need to do is select proper com port
Sent from my Micromax AQ4501 using XDA Free mobile app

Shrihari007 said:
Requirements:
*) Phone with unlocked boot loader.
*) Windows PC (preferable win7)
*) IMEI and S/N writer tool
*) Drivers of CND and our mobile drivers installed
1. EXTRACT IMEI_FILES AND IMEI TOOLS ON THE DESKTOP OF UR PC
2. NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe)
3. NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB (SEE BELOW PLATFORM IN TOOL)
4. IN WRITE TOOL TICK IMEI 1 AND IMEI 2 AND WRITE THERE BOTH UR IMEI
5. NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER DATABASE AS DIRECTED IN STEP 2
6. SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
7. THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START
8. NOW SWITCH OFF UR CELL AND CONNECT
9. NOW GO TO DEVICE MANAGER ( BY RIGHT CLICK ON MY COMPUTER ICON AND CLICK ON PROPERTY ,AFTER OPENING WINDOW CLICK ON DEVICE MANAGER FROM SIDE BAR IN WIN 7 AND ABOVE...
10. AFTER OPENING OF DEVICE MANAGER ,GO TO CDC DRIVER WHICH WILL SHOW RED OR YELLOW CROSS SIGN ,NOW RIGHT CLICK ON AND CLICK ON UPDATE DRIVER .
11. NOW EXTRACT THE CDC DRIVER IN NEW FOLDER ANYWHERE AND BROWSER TO THE CDC DRIVER LOCATION AMD SELECT FOLDER AND CLICK OK TO UPDATE THE CDC DRIVER.. AFTER SUCCESSFULLY DONE
12. AGAIN CLICK ON START AND CONNECT UR PHONE ....MAKE SURE YOU SELECT PROPER COM PORT. CHECK IT IN YOUR DEVICE MANGER. MY COMPUTER-->PROPERTIES-->DEVICE MANAGER-->PORTS AND COMS. NOW IT WILL WRITE IMEI PERMANENTLY
13. AFTER PROCESS FINISH REBOOT AND ENJOY.....
Download All in One Zip
​
Click to expand...
Click to collapse
whether it can be done to overcome Invalid IMEI on Samsung Galaxy Note 2, bro?

No its only for mediatek devices

what are the ways that a imei number can get damaged?
hi all.
just asking this question to take care of not to do such things.
how can a imei number get damaged?

How to?? How to select proper driver
And How TO Do That?? please Explain i am in big trouble
Shrihari007 said:
Me too had same problem..... All you need to do is select proper com port
Sent from my Micromax AQ4501 using XDA Free mobile app
Click to expand...
Click to collapse

Does this work on every android phone?
Mine is galaxy note 10.1 n8000, with gnabo rom 4.4.2 running on it.
Sent from my Xperia Acro S using Tapatalk

Araragi said:
Does this work on every android phone? Mine is galaxy note 10.1 n8000, with gnabo rom 4.4.2 running on it.
Click to expand...
Click to collapse
the answer is here.

why he is not replying????
I am in invalid imei
Why the thread maker is not replying instead you check this video on YouTube for repair the another way
https://youtu.be/8DT-32tPbMY
Sagar Kapasi said:
And How TO Do That?? please Explain i am in big trouble
Click to expand...
Click to collapse

Enter to ModemMeta Fail
Now what to Do ? I install the CDC Driver but it still says failed to enter meta mode ? i am on win7 32bit! is this only for 64 bit ?
I have lost my imei, wifi Mac Address, and Serial Number ?
I am in a Big Trouble ...PLZ help me!

srikantrn said:
Enter to ModemMeta Fail
Now what to Do ? I install the CDC Driver but it still says failed to enter meta mode ? i am on win7 32bit! is this only for 64 bit ?
I have lost my imei, wifi Mac Address, and Serial Number ?
I am in a Big Trouble ...PLZ help me!
Click to expand...
Click to collapse
Read the thread carefully!

Flash the stock ROM via SP flash tools.
Sent from my Sparkle V

YU IMEI Issue

Hello All,
Im writing my experience with Yu Yureka.
The device was working fine, until one day, when i thought of updating the ROM for a stable battery and optimum processor usage.
I was successful in installing the RR 5.8.3 (latest) ROM.
However, I noticed later that the IMEI is wiped, and replaced by 0123456789012345.
Too bad, that i dint search beforehand on this issue.
Now that it has happened, i went searching for an effective solution, but all in vain.
The device is now idle, waiting for a IMEI fix, which as far as im aware of, is nowhere near.
Few people suggested someways, which dint quite help me out. (Thanks to all of them, though, I've also hit the THANKS button)
The point is, please, if you know how to fix it, please direct me the ways.
QPST way dint work for me: (https://forum.xda-developers.com/yureka/help/recovering-lost-imei-yu-yureka-yunique-t3331485)
Also this dint work : https://forum.xda-developers.com/yureka/help/yu-yureka-wiped-imei-t3449513
SAILAKKI's youtube video coudnt help me.
None of those IMEI fixing tools helped.
This is the last resort that i could think of. (I had requested for help, but sadly, none replied to my older thread)
ROM's Ive tried so far:
RR 5.8.3,Haxagon ROM, SlimRom,Lineage OS,Cdroid, CM-13 Tomato.
What i did?
Used TWRP to install RR 5.8.3 + Gapps(7.1 X64 Pico) + Supersu 2.79
And, then, Used Terminal Emulator - Gave SU access - Ran adb shell.
Result:
ADB NOT FOUND
And now, im here, waiting for that person who could assist me/help me with this.
I understand that your Inboxes are already full with many requests like mine.
All i could ask for is, is it fixable? If yes, then please suggest the ways.
Thanks.
(note: if any info is needed, ill share the same here, and im good to test new ways as well)

Did you try qxdm professional?

sohail0098 said:
Did you try qxdm professional?
Click to expand...
Click to collapse
hello
i tried it, but it dint work.
ill retry if you insist
howwver, can you tell me which version to use?
links woudl be helpful
thanks

pdpyen said:
hello
i tried it, but it dint work.
ill retry if you insist
howwver, can you tell me which version to use?
links woudl be helpful
thanks
Click to expand...
Click to collapse
Sailakki's method helped me get back mine. Are you sure u followed every step ?

KumarGautam said:
Sailakki's method helped me get back mine. Are you sure u followed every step ?
Click to expand...
Click to collapse
hello
ive tried it. however, the adb shll on the device is not found

KumarGautam said:
Sailakki's method helped me get back mine. Are you sure u followed every step ?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pl;ease see

pdpyen said:
pl;ease see
Click to expand...
Click to collapse
Type su
Give root permission
Type command in given method
And follow steps
QUOTE=botnet.py;65720327]Hi friends We often suffer hard brick in our devices .
Even after flashing stock recovery . IMEI is not recovered
its easy to recover imei in MTK based devices but when it comes to qualcomm based devices
it is a big mess
This is my First Tutorial
how to recover lost IMEI in yureka yunqiue & other some qualcomm devices
im not responsible if anything wrong happen to your device
Tools you need
QXDM professional
usb hs-diagnostic 9006 driver
adb tool & driver
terminal app
now lets begin
1) Root your bricked phone & install terminal app (Note :- assuming you flashed stock rom or custom rom & you are facing imei lost issue )
now grant terminal app su permission by typing
SU in the app
in terminal type this code
Code:
setprop sys.usb.config diag,adb
now connect you phone to the usb
if you have installed the drivers correctly your phone will be detected by you system in diagnostics mode
now here is the trick
IMEI information is located inside the NV_ITEMS ==550
open qxdm professional
goto communication
browse to NV_ITEMS
now search for 550 in Item number
select the option dual sim (sim 0 stands for SIM1 and 1 stands for SIM2)
Code:
IMEI example "123456-78-9012340"
sort it out 1 ,23 ,45 ,67 ,89 01 ,23 ,40
{ 0x08, 0x1A, 0x32, 0x54, 0x76, 0x98, 0x10, 0x32, 0x04 }
As you can see i have sorted it out & swaped the values
0x08 is the length keep it as it
0x1A = first digit of IMEI with A
0x32 = swaped 23 to 32
.
.
after you are done putting value of your IMEI in sim 1 press the write button & wait few sec
now repeatg the step for sim2
Reboot Your Phone & voila
Hit Thanks if you think i have helped you [/QUOTE]
Copied from OP

nischait said:
Type su
Give root permission
Type command in given method
And follow steps
QUOTE=botnet.py;65720327]Hi friends We often suffer hard brick in our devices .
Even after flashing stock recovery . IMEI is not recovered
its easy to recover imei in MTK based devices but when it comes to qualcomm based devices
it is a big mess
This is my First Tutorial
how to recover lost IMEI in yureka yunqiue & other some qualcomm devices
im not responsible if anything wrong happen to your device
Tools you need
QXDM professional
usb hs-diagnostic 9006 driver
adb tool & driver
terminal app
now lets begin
1) Root your bricked phone & install terminal app (Note :- assuming you flashed stock rom or custom rom & you are facing imei lost issue )
now grant terminal app su permission by typing
SU in the app
in terminal type this code
Code:
setprop sys.usb.config diag,adb
now connect you phone to the usb
if you have installed the drivers correctly your phone will be detected by you system in diagnostics mode
now here is the trick
IMEI information is located inside the NV_ITEMS ==550
open qxdm professional
goto communication
browse to NV_ITEMS
now search for 550 in Item number
select the option dual sim (sim 0 stands for SIM1 and 1 stands for SIM2)
Code:
IMEI example "123456-78-9012340"
sort it out 1 ,23 ,45 ,67 ,89 01 ,23 ,40
{ 0x08, 0x1A, 0x32, 0x54, 0x76, 0x98, 0x10, 0x32, 0x04 }
As you can see i have sorted it out & swaped the values
0x08 is the length keep it as it
0x1A = first digit of IMEI with A
0x32 = swaped 23 to 32
.
.
after you are done putting value of your IMEI in sim 1 press the write button & wait few sec
now repeatg the step for sim2
Reboot Your Phone & voila
Hit Thanks if you think i have helped you
Click to expand...
Click to collapse
Copied from OP[/QUOTE]
thanks for pointing
but whre to get xqdm? and which version

pdpyen said:
Type su
Give root permission
Type command in given method
And follow steps
QUOTE=botnet.py;65720327]Hi friends We often suffer hard brick in our devices .
Even after flashing stock recovery . IMEI is not recovered
its easy to recover imei in MTK based devices but when it comes to qualcomm based devices
it is a big mess
This is my First Tutorial
how to recover lost IMEI in yureka yunqiue & other some qualcomm devices
im not responsible if anything wrong happen to your device
Tools you need
QXDM professional
usb hs-diagnostic 9006 driver
adb tool & driver
terminal app
now lets begin
1) Root your bricked phone & install terminal app(Note :- assuming you flashed stock rom or custom rom & you are facing imei lost issue )
now grant terminal app su permission by typing
SU in the app
in terminal type this code
now connect you phone to the usb
if you have installed the drivers correctly your phone will be detected by you system in diagnostics mode
now here is the trick
IMEI information is located inside the NV_ITEMS ==550
open qxdm professional
goto communication
browse to NV_ITEMS
now search for 550 in Item number
select the option dual sim (sim 0 stands for SIM1 and 1 stands for SIM2)
Copied from OP
Click to expand...
Click to collapse
thanks for pointing
but whre to get xqdm? and which version[/QUOTE]
Google it
https://www.google.co.in/search?&q=qxdm+professional+download
Try anyone

Have you been able to restore your imei??? If not, PM me...
---------- Post added at 12:49 AM ---------- Previous post was at 12:43 AM ----------
pdpyen said:
View attachment 4149101
pl;ease see
Click to expand...
Click to collapse
adb is in pc and not in device. While using terminal app in phone you have just type the following command:-
su
setprop sys.usb.config diag,adb

yureka imei issue resolved
I have also faced the same issue. After flashing imei numbers became 0123456789 or some thing like that. Both sims. So can't connect to the network. I tried several methods. Nothing worked out. Given it to mictomax service centre and after keeping the mobile for a week they washed their hands stating I have to change the board costing 2500..
So I got back the mobile.
Finally I learnt the following facts. To restore the imei you have to flash the stock ROM. That will have the finger print I'd. Only after doing that you can restore the imei. To check the finger print I'd you can download the app called droid hardware info. Using this you can find out build finger print release keys. Then you have to flash that ROM. Then you have to root your phone using any method. Then you have to download the software called miracle mobile 2.27A. You can find it after googling then download terminal emulator on your mobile. Give root access. Enable diagnostic mode by typing the command you can get it googling. Open the miracle box. Before that you have to disable the antivirus on your system. In the tool box mostly start button is hiding. Close the application and change the system year to 2014. Now miracle box strategy button will work. Aftertybing in the command for terminal emulator you just connect the mobile through USB. Drivers will be installed automatically to adb mod. You can confirm it in my computer hardware devises. After that in miracle box go to Qualcomm. Lg imei repair. Type your both imei s in the respective space. Click start. That's all. You imei number will be restored. Network will be connected. Wish you will get your yureka back. Regarding miracle tool box you have to download the modified version using that only you can do. Otherwise it will require box also. Search for without box and how to open without box using miracle box loader etc.,. I lost my imei on 30.12.2016. After trying all methods and service centre visits several times and got it back on 26.01.2017. After 26 days...hope you will get back your yureka imei number

Question HELP needed for unlocking the Mi ultra

HI
I tried to unlock my MI ultra ... but the unlock tool doesnt see my phone
I did .. developper option ... the OEM unlocking , USB debugging and the Mi unlock add account
I signed into same account on the latest unlock tool
fastboot mode
but nothing appear on the unlock tool screen
what did I miss ?

You have to install the Fastboot drivers on your Windows.

Afg Playa said:
You have to install the Fastboot drivers on your Windows.
Click to expand...
Click to collapse
I DID
But same issue .. I will try to use different PC

Anesthetist said:
HI
I tried to unlock my MI ultra ... but the unlock tool doesnt see my phone
I did .. developper option ... the OEM unlocking , USB debugging and the Mi unlock add account
I signed into same account on the latest unlock tool
fastboot mode
but nothing appear on the unlock tool screen
what did I miss ?
Click to expand...
Click to collapse
On Windows 10 with your phone plugged in just go to windows update and you'll find a driver install request

Anesthetist said:
HI
I tried to unlock my MI ultra ... but the unlock tool doesnt see my phone
I did .. developper option ... the OEM unlocking , USB debugging and the Mi unlock add account
I signed into same account on the latest unlock tool
fastboot mode
but nothing appear on the unlock tool screen
what did I miss ?
Click to expand...
Click to collapse
Did you do the unlocking in fastboot mode? Try another usb cable, some people are having issues with some.

Run the unlock tool as an administrator - the only thing which solved it for me under Windows 10.

Send me a private message with teamviewer details. I can help

Make sure the following is done prior to booting into fastboot:
Make sure that developer options is enable.
Make sure Unlock OEM is enabled
Make sure you have linked your MI account to your phone
Make sure USB debugging is enabled
Step 1: Place the phone in fastboot and plug it into your PC.
Step 2: Navigate to your windows search bar, enter "device manager" and open the top result. It should now show you several different drivers. You should see one named Android under "Other Devices."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you see a little triangle, then you just need to download the driver for it.
I downloaded these driver
Step 3: Uncompress the files and open the folder up. You should see a file called Mi USB Driver. Run that file.
Step 4: A window will pop up asking you to unplug your Phone. Unplug it from the USB and replug it back in. It should then change the message to "Installing Drivers"
Step 5: Open the MI Unlock Tool and refresh. You should now have the ability to unlock the phone.
Let me know if that helped, or if you need additional assistance.

panda24z said:
Make sure the following is done prior to booting into fastboot:
Make sure that developer options is enable.
Make sure Unlock OEM is enabled
Make sure you have linked your MI account to your phone
Make sure USB debugging is enabled
Step 1: Place the phone in fastboot and plug it into your PC.
Step 2: Navigate to your windows search bar, enter "device manager" and open the top result. It should now show you several different drivers. You should see one named Android under "Other Devices."
View attachment 5329617
If you see a little triangle, then you just need to download the driver for it.
I downloaded these driver
Step 3: Uncompress the files and open the folder up. You should see a file called Mi USB Driver. Run that file.
View attachment 5329623
Step 4: A window will pop up asking you to unplug your Phone. Unplug it from the USB and replug it back in. It should then change the message to "Installing Drivers"
View attachment 5329625
View attachment 5329627
Step 5: Open the MI Unlock Tool and refresh. You should now have the ability to unlock the phone.
View attachment 5329629
Let me know if that helped, or if you need additional assistance.
Click to expand...
Click to collapse
Thank you so much
I have been very busy lately with covid 19 pts and Urgent operations ... I will follow your instructions as soon as I can
Thank you so so much

Anesthetist said:
Thank you so much
I have been very busy lately with covid 19 pts and Urgent operations ... I will follow your instructions as soon as I can
Thank you so so much
Click to expand...
Click to collapse
Please let me know if it worked for you.
I'll have to do the same procedure soon.