so im at the end of my tether, i have run out of ideas/cant be arsed anymore and just want my phone back! i believe there are some signs of life in my phone still e.g still can get into recovery mode still and therefore still have some hope! my previous attempts can be seen here - http://forum.xda-developers.com/search.php?searchid=86653826
any help would be immensely appreciated and a reward if it can be fixed!
thanks - sonny
cw00 said:
so im at the end of my tether, i have run out of ideas/cant be arsed anymore and just want my phone back! i believe there are some signs of life in my phone still e.g still can get into recovery mode still and therefore still have some hope! my previous attempts can be seen here - http://forum.xda-developers.com/search.php?searchid=86653826
any help would be immensely appreciated and a reward if it can be fixed!
thanks - sonny
Click to expand...
Click to collapse
Ok, the link provided it does not exist. But if you still can boot in download mode try flashing a stock gingerbread firmware from Dr. Ketan's thread thru Odin PC.
Sent from my GT-N7000 using xda app-developers app
I think thats been tried. So Sonny, u have GT-N7000 16GB Is that correct?
Sent from my GT-N7000 using xda app-developers app
glevitan said:
Ok, the link provided it does not exist. But if you still can boot in download mode try flashing a stock gingerbread firmware from Dr. Ketan's thread thru Odin PC.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
oops sorry, it was just a link to my previous posts in the help thread and a previous thread made in the wrong galaxy section
shoey63 said:
I think thats been tried. So Sonny, u have GT-N7000 16GB Is that correct?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
yep thats correct, all that happens when i turn it on is the yellow triangle and samsung logo appears.
Ok, lets get recovery back. (just got home from work. Need to have a shower and grab a beer be back shortly
Sent from my GT-N7000 using xda app-developers app
Ok press the vol down + power + home button all at one and keep holding it till u see the galaxy note logo
then u will see vol up to continue
download a gb rom from Dr ketans thread http://forum.xda-developers.com/showthread.php?t=1424997
use pc odin to flash it by selecting it in the pda tab.
after successfully flashing. Reboot Into recovery and do a wipe data factory reset. then reboot.
nokiamodeln91 said:
Ok press the vol down + power + home button all at one and keep holding it till u see the galaxy note logo
then u will see vol up to continue
download a gb rom from Dr ketans thread http://forum.xda-developers.com/showthread.php?t=1424997
use pc odin to flash it by selecting it in the pda tab.
after successfully flashing. Reboot Into recovery and do a wipe data factory reset. then reboot.
Click to expand...
Click to collapse
I don't think it's that simple. He was on wrong forums getting advice to flash this that and the other and flashing pre-rooted GB rom doesn't work anymore. Please bear with me while I try a different approach.....
---------- Post added at 07:27 PM ---------- Previous post was at 06:58 PM ----------
@ Sonny are u able to put files on your ext SD card via another device? (eg Camera, printer, old phone)
Also, in download mode does it say "CUSTOM BINARY DOWNLOAD: NO" and "CURRENT BINARY: SAMSUNG OFFICIAL"
shoey63 said:
I don't think it's that simple. He was on wrong forums getting advice to flash this that and the other and flashing pre-rooted GB rom doesn't work anymore. Please bear with me while I try a different approach.....
---------- Post added at 07:27 PM ---------- Previous post was at 06:58 PM ----------
@ Sonny are u able to put files on your ext SD card via another device? (eg Camera, printer, old phone)
Also, in download mode does it say "CUSTOM BINARY DOWNLOAD: NO" and "CURRENT BINARY: SAMSUNG OFFICIAL"
Click to expand...
Click to collapse
it says:
"CUSTOM BINARY DOWNLOAD: YES (2 COUNTS)" and "CURRENT BINARY: CUSTOM" hope this helps.
yes i can use my SD card on my current temporary phone, what have you got in mind?
thanks for the replies so far
cw00 said:
it says:
"CUSTOM BINARY DOWNLOAD: YES (2 COUNTS)" and "CURRENT BINARY: CUSTOM" hope this helps.
yes i can use my SD card on my current temporary phone, what have you got in mind?
thanks for the replies so far
Click to expand...
Click to collapse
OK this means means Samsung will know you have messed with your phone and probably won't honor warranty (If you have one).
Now it's PC Odin time again and another raised flash count. Download This Pit file. Now connect to PC Odin in download mode put the file in PIT box. Repartition should automatically be ticked. Now flash it. It should take only seconds. Report back if successful..
shoey63 said:
OK this means means Samsung will know you have messed with your phone and probably won't honor warranty (If you have one).
Now it's PC Odin time again and another raised flash count. Download This Pit file. Now connect to PC Odin in download mode put the file in PIT box. Repartition should automatically be ticked. Now flash it. It should take only seconds. Report back if successful..
Click to expand...
Click to collapse
ok will give this a go now, thanks
ok it passed! here is what it says:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Removed!!
Ok let's assume success :fingers-crossed: Now close Odin and download A PC Odin flashable Philz kernel. Open Odin again and put it in PDA (don't tick "repartition"), and flash it. If successful, you should now be able to boot into recovery.
ok trying now, what do you mean by boot into recovery?
ok cool it passed, you are on a roll! there was a small blue loading bar on the phone this time as well
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-ZSLPN-OZS-2.7.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Removed!!
also, what do you mean by boot into recovery?
After flash is "passed" by PC Odin, Press Volume Up + power + menu buttons simultaneously and hold until a menu appears. describe what you see
shoey63 said:
After flash is "passed" by PC Odin, Press Volume Up + power + menu buttons simultaneously and hold until a menu appears. describe what you see
Click to expand...
Click to collapse
hmm thats weird, i could get into recovery mode before but not seems i cant.
cw00 said:
hmm thats weird, i could get into recovery mode before but not seems i cant.
Click to expand...
Click to collapse
You got success on flashing kernel right? Take battery out for 20 - 30 seconds, replace, and do Vol UP + menu + power again. Something must happen...
shoey63 said:
You got success on flashing kernel right? Take battery out for 20 - 30 seconds, replace, and do Vol UP + menu + power again. Something must happen...
Click to expand...
Click to collapse
yeh it passed, took the battery out, all that happens is it goes from samsung screen to black and and then reappears. can still get into download mode. you literally hold the three buttons down till it appears right?
The button on the left must be held at the TOP (up), plus menu plus power until a menu appears. Try again.. Samsung logo should flash twice before recovery is entered (dont let go till it does)
Related
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Yeh happened a few times. Are you using the right pit file? Also set odin to win xp compatibility mode with admin access. Unplug all usb except mouse and kb and try again
Worst case find yaself a xp box and do it there.
Sent from my GT-I9000 using Tapatalk
d.fx said:
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Click to expand...
Click to collapse
Did you follow exactly the instruction given? You may read the link below
http://forum.xda-developers.com/showpost.php?p=7940762&postcount=1
It did happen to me once , i was on windows 7 , i installed xp on my macbook and since then all my flash went great.
Sent from my GT-I9000 using XDA App
d.fx said:
hello all! so i hope that wans't posted before,
Here is the thing , earlier today i tried to flash to JM7 but odin got stuck for 2 hours so i unplugged the usb. Since then i have been trying to flash jm,1 jm5, or jm6 but i can't get past the "get PIT for Mapping".,
Since earlier i also can't make the phone to boot, black screen all the way , the only thing i can do is get in download mode, i can't even access recovery mode.
did it ever happen to anyone?
Click to expand...
Click to collapse
Yeah I know..I'm bringing a thread back from the dead. But I'm desperate right now.
I'm having the same issue. So I rooted my phone awhile ago and was using the Paragon RC4 ROM, I upgraded it to RC6 and everything worked fine, but I decided to start from a clean slate and use ODIN3 to go back to stock and start from scratch (with a full battery cause when I first flashed I was apparently only at 98% battery). So I started ODIN3 and put the phone into download mode. ODIN picked the phone up right away and I hit Start. ODIN's status says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
And it sits at 'Get PIT for mapping..'.
There's a small blue status bar on the phone and it just sits at about 1/4".
I did a bad thing and yanked the battery and now the phone will only go into Download mode and ODIN still just sits at 'Get PIT for mapping..'. I can't get into recovery mode, can't even get a splash screen. I can't post in the [STOCK ROM\ Odin3 thread cause I'm a new member. So I'm stuck...anyone know what I can do to fix this?
Where is the pit file you are using .
jje
I have the same problem. Phone get's stuck at that point. I don't know what to do. I am using win 7 64 bit. Does anyone have an idea.
razyell said:
I have the same problem. Phone get's stuck at that point. I don't know what to do. I am using win 7 64 bit. Does anyone have an idea.
Click to expand...
Click to collapse
Put pit file on the desktop in a folder with the zipped files makes location easy .
Are you using the correct pit file are you loading it in PIT
jje
done.
JJEgan said:
Put pit file on the desktop in a folder with the zipped files makes location easy .
Are you using the correct pit file are you loading it in PIT
jje
Click to expand...
Click to collapse
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
razyell said:
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
Click to expand...
Click to collapse
My i9003 gets stuck there. i tried to emulate but i get an error regarding the PDA. can u please let us know how u did it???
razyell said:
I've managed to solve it. It wasn't the pit file, it was my 64 bit Windows. After I emulated a virtual machine and installed windows xp 32 bit, it worked like a charm.
Click to expand...
Click to collapse
this is the error i get in the virtual pc in xp mode
i solved it by plugging the cord into another port and letting windows rediscover the phone
screwyluie said:
i solved it by plugging the cord into another port and letting windows rediscover the phone
Click to expand...
Click to collapse
Plus One to this solution. Thought I killed my phone.
screwyluie said:
i solved it by plugging the cord into another port and letting windows rediscover the phone
Click to expand...
Click to collapse
+1
soft brick
i got the same problem.
cant get it right. im on winxp 32 got the pit file from this thread and stock rom MDC from Sammobile site.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Removed!!
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Added!!
I don't know what happened, I switched from pc to laptop and tried the same thing with pit file, same error, but my phone is working now. No changes in the phone it's still in MDL and I have superuser app but it says binary not found. Can't install binary also...
Sent from my SPH-L710 using Tapatalk 2
SOLVED
http://forum.xda-developers.com/showthread.php?t=2298876
[solved] pit file not found error
Sent from my SPH-L710 using Tapatalk 2
same problem :/
n30nix said:
Yeah I know..I'm bringing a thread back from the dead. But I'm desperate right now.
I'm having the same issue. So I rooted my phone awhile ago and was using the Paragon RC4 ROM, I upgraded it to RC6 and everything worked fine, but I decided to start from a clean slate and use ODIN3 to go back to stock and start from scratch (with a full battery cause when I first flashed I was apparently only at 98% battery). So I started ODIN3 and put the phone into download mode. ODIN picked the phone up right away and I hit Start. ODIN's status says:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
And it sits at 'Get PIT for mapping..'.
There's a small blue status bar on the phone and it just sits at about 1/4".
I did a bad thing and yanked the battery and now the phone will only go into Download mode and ODIN still just sits at 'Get PIT for mapping..'. I can't get into recovery mode, can't even get a splash screen. I can't post in the [STOCK ROM\ Odin3 thread cause I'm a new member. So I'm stuck...anyone know what I can do to fix this?
Click to expand...
Click to collapse
same problem dud , i didnt find any solution so far ! :/
moody-mj said:
same problem dud , i didnt find any solution so far ! :/
Click to expand...
Click to collapse
Do you have a custom recovery or not?
Sent from my SPH-L720 using Tapatalk 4 Beta
thx for your fast replay...
pvinodnayak said:
Do you have a custom recovery or not?
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
first of all thanks for your fast reply
i've downloaded this firmware ( \N7100XXDLJ2 OXA FACTORY )
and tried it , didnt work
i work at samsung company in lebanon , and i have all the offical firmwares
i tried them , it wont work
in odin 3.04 it wont work , it quickly fails with out even starts ( re-partition operation failed )
and in odin 3.07 ( get pit for mapping ) and stucks on ( set partition )
i tried allot of different PIT files , and unticking ( re-partition ) nothing happend , and it only goes to download mode , or when i turned it on , it stucks on ( samsung galaxy note II ) plz help me
Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess
clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)
Balbaroth said:
Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess
Click to expand...
Click to collapse
Same thing happen me too, i was flashing KL3 from CM9 build, even if flash through PC odin also i got Samsung screen boot loop. then i did clean wipe, everything went fine after wipe.
dr.ketan said:
clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)
Click to expand...
Click to collapse
did cleared the cache ,
and the dalvic cache ( which says no such files or directory )
after i tried the wipe data , still no success...
im stuck on Samsung Galaxy note GT-N7000 logo ,
is there any particular order you have to do to restore ?
Ranjan : i dont think my note boot loop as ive experienced on rocket rom a few times hehe , its just stuck at the black screen with the white Samsung Galaxy note GT-N7000 written on it when i power up
or if im too dumb to solve this , i would send it to repairs but cant find any place nearby , you guys know a place that do that kind of stuff ?
i appreciate the help thanks guys
You shud try to reflash it
Sent from my GT-N7000 using xda premium
dr.ketan said:
You shud try to reflash it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
you mean reflash using odin ?
when i use odin it download well it says no errors and reboot but still stuck , unless there is others ways beside odin
also i wanted to say when my root and cmw went fine i did a back up on it and it worked before , each time i try to restore it in the end at the data it says :
.android_secure.img not found and its bypassing that part
but says its done after , but doesnt boot too
Pull out the battery and replace after 10 seconds, then try flashing different ROM using PC Odin. while flashing do not Tick Re-partition and do not attach pit file.
If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.
SpecialStar said:
If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.
Click to expand...
Click to collapse
You Should be more specific
Flashing ANY Stock ROM with PC odin, don't raise counter.
Your reply shud be flashing custom ROM with PC odin counter will raise.
not ANOTHER
Right, sorry forget to mention
So he should just flash a STOCK ROM with Odin
thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair
Balbaroth said:
thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair
Click to expand...
Click to collapse
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.
ranjan.alva said:
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.
Click to expand...
Click to collapse
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone
Balbaroth said:
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone
Click to expand...
Click to collapse
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
did you install any custom ROM on it??
ranjan.alva said:
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
Click to expand...
Click to collapse
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory
Balbaroth said:
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory
Click to expand...
Click to collapse
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck
ranjan.alva said:
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck
Click to expand...
Click to collapse
ok will try LA3 ,
we are talking about this one right ?
N7000XXLA3 --------2.3.6------- 2012 January---N7000OXALA3--------------------Open Europe-----------------------
i found it using Dr.ketan signature
( huge thanks for the tutorial and the quick access to note roms )
im crossing my fingers and will keep you updated
, if by any chance it doesnt work ,and that i have to fix it , can you tell me where they service notes , in canada montreal its not even out yet lol
i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin
Richy99 said:
i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin
Click to expand...
Click to collapse
okay i flashed the la3 rom and still stuck lol darn ill try la4 then ,
it succeeded in odin pc and on the phone still says samsung official
im really out of options i guess , unreal im beginging to think it has others issues
is this place reliable for repairs ? http://repair-my-device.com or any other suggestions i cant find nothing beside that
EDIT : okay i tried the LA4 still doesnt boot up and stuck on the black screen with the samsung galaxy note gt-n7000 unless i go to cwm or download mode odin i cant do anything else ,
i was reading stuff and i was wondering if i jig could help ?
Was on a completely rooted Midnote.
wanted to try rocketrom ics. So went to recovery and flashed v 1.4, did a complete wipe before and after, but after that, the recovery module became unresponsive, so I force rebooted and the phone was stuck on boot screen "Samsung Galaxy Note 7000".
So I used PC odin and tried to flash the KL3 ROM but was stuck at factoryfs.img. Tried LA5 too, but same situation. Kindly help.
I am from Pune, India.
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?
vlxdxmxr said:
I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?
Click to expand...
Click to collapse
i was just playing a game from android market,
my phone has never been flashed everything was official and working well
what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?
MrPlox said:
what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?
Click to expand...
Click to collapse
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....
letters_to_cleo said:
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....
Click to expand...
Click to collapse
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it
MrPlox said:
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it
Click to expand...
Click to collapse
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.
jonpaslim said:
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.
Click to expand...
Click to collapse
Reflash ICS v4.0.4 its will improve the battery performance via pc odin
well i tried to flash another one but it gets stuck at NAND write and stays there
MrPlox said:
well i tried to flash another one but it gets stuck at NAND write and stays there
Click to expand...
Click to collapse
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..
sahilarora2003 said:
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..
Click to expand...
Click to collapse
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
Read this http://forum.xda-developers.com/showthread.php?t=1810954
Follow Dr.Ketan guide,you will be fine...:good:
MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
http://d-h.st/HJM
Flash it via PCODIN
MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
It should not happen such with you...
If you are out of battery on official ROM, generally by getting it charged back can resolve the issue...
Try to recall, you must Gabe something else...
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
Did get any help?
I have the same problem.
I wasn't using any custom rom
I have Galaxy Note N7000
i was running stock ICS 4.0.4 (open Germany) [N7000XXLRK_N7000DBTLRK_DBT]
My phone was rooted but with no custom binary counts.
I install beat audio driver and I count restart my phone. it was stuck on the samsung screen
I didnt have any back up so i tried to use Odin and re-flash my stock ICS firmware but its stuck at NAND write start!!!
I have read so many threads but it hasn't helped. it seems like almost everyone is using custom roms
i even got one binary count follow the tutorial on this thread after i flashed a kernel (4pda_kernel.tar) http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Ive also tried stock gingerbread still stock there..
My phone is able to enter recovery mode or download mode or stock in the samsung screen..
PLEASE can someone help with something that works..?
sahilarora2003 said:
http://d-h.st/HJM
Flash it via PCODIN
Click to expand...
Click to collapse
well imma try just flashing stock ics from dr Ketan right now and i'll let you guys know what the result is
well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz
MrPlox said:
well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz
Click to expand...
Click to collapse
Havent seen any update from u... have u managed to rectify the issue?
nokiamodeln91 said:
Havent seen any update from u... have u managed to rectify the issue?
Click to expand...
Click to collapse
no havan't been able to fix it yet it's a pretty tough issue, now i'm following a guide to completely repartition the phone cuz there might be a bad sector
Try re-flash back with PCODIN and once flashed and still stuck at 'samsung' boot screen, press vol up + home + power button and do a factory reset. Then reboot system/wipe data cache.
[Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode screen
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin. It created a big problem for me. I couldn't go in to download mode after this.
So finally I purchased USB jig to enable Download mode (last option to make mobile in download mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box showing some port no. Above output comes when i continue with installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
vishu_10d said:
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin s/w. It created a big problem for me. I couldnt go in to downlaod mode after this.
So finally I purchased USB jig to enabled Download mode (last option to make mobile in downlaod mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box with some port number. Above output is comes when i continue installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
Click to expand...
Click to collapse
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
BWolf56 said:
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
Click to expand...
Click to collapse
Thanks for the reply...
I tried with Odin one click downloader also... but it is failing... attaching the image...
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
I followed the steps written in the forum above. But that is not working my case. I tried the steps in different computer with diff OS installed. but still same problem.
Is there any way to get PHONE, PDA, CSC file separately for i897 ? I could install I9000 in my samsung captivate mobile which had these files. So just thought, if i can get these files for i897, probably it should work?
Any Idea where i can get these files?
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
Still my problem is same. I went through the link. but that is also not helping.
In my phone, I cant see download screen, even though if i use USB jig.
When I run Odin s/w, I can see in odin as port "Added" when Connect my mobile with computer using usb port.
Usually Odin show port added when u are in download mode. But here in my case, when i first USB jig and then connect to computer, download mode screen message and image doesnt come. it shows nothing(like no display). But I can see , Odin shows port Added. and I could update kernel, do partitions etc. But when I select Image file as PDA. and click start. It always fails.
Is it happening because i cant see download mode screen ?
1. What firmware I need to install and how which contains code for showing download screen ?
2. Or can anybody provide me all files i.e. PIT, Bootloader, PDA, Phone, CSC for odin so that i can select all files in respective fields under Odin software and start update?
Please help.
One more thing i have noticed.. here is the output of odin when i update my mobile with following files of I9000 model. while trying images for my captivate mobile, I found a zip file for model GT I9000 and package name was -GT_I9000_ZSJPK_ZSJPG_OZSJPG. It had three files as - 1. CSC_OZSJPG.tar.md5. 2. PDA_ZSJPK.tar.md5. 3. PHONE_ZSJPG.tar.md5.
I selected this files in corresponding PHONE, CSC, PDA fields in odin and it updates phone successfully with the following output -
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_ZSJPK.tar.md5 is valid.
<OSM> PHONE_ZSJPG.tar.md5 is valid.
<OSM> CSC_OZSJPG.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> param.lfs
<ID:0/017> zImage
<ID:0/017> factoryfs.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> modem.bin
<ID:0/017> cache.rfs
<ID:0/017> Removed!!
<ID:0/017> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/018> Added!!
<ID:0/018> Removed!!
<ID:0/019> Added!!
But even though i can see my phone with I9000 model image installed. but most of the operations it doesnt work. might be becoz image is not fully compatible with Captivate model. so no use.
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
x0ne215 said:
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
Click to expand...
Click to collapse
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
vishu_10d said:
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
Click to expand...
Click to collapse
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
m1batt1 said:
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
vishu_10d said:
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
Click to expand...
Click to collapse
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
BWolf56 said:
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
Click to expand...
Click to collapse
Hi,
when i usb jig and after that connect to system. I can see port Added in Odin software. which ideally happens when mobile is in downlaod mode.
but here for me display doesnt show anything on screen, screen remain blank. No android icon comes. but still I can see port added in odin and also can install files in the mobile. like pit, bootloader PDA files. etc.
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
vishu_10d said:
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
Click to expand...
Click to collapse
I believe 4-2ndtwin has the link to them in his sig.
BWolf56 said:
I believe 4-2ndtwin has the link to them in his sig.
Click to expand...
Click to collapse
So any suggestions ? what should I do now ?
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
Search for 4-2ndtwin.. Go into his profile, then sig link and find the separated files.
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
You need Jtag
Check my signature for more detail.
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks a lot for providing me these files. This is what I wanted. I will try as you suggested and will let you know the result.
Thanks
Hello, I've had my Galaxy Note GT-N7000 for about a year now. I've never rooted it before.
This morning I was browsing my phone and it just shut off and went to the "Samsung GALAXY Note GT-N7000" boot screen.
I saw on other forms instructions on how to hard reset the N7000 (Remove battery, put back in, then hold Volume up, Power and Home button, then it gives you a menu to choose from)
When I do that it doesn't give me a menu screen, It just goes to the boot screen I described above, or it goes to the little green android man with the rotating object in him, then back to the (GT-N7000) boot screen a few minutes later.
I have a macbook, so I can't use the odin program. (Nor would I know how)
I don't mind wiping all the data from my phone and restarting from the beginning.
I have all the stuff I need (phone numbers) stored on my google account. And I can redownload my main apps I liked.
Any ideas?
Update
I have a windows computer I can use, so I want to use Odin to put the normal firmware back on my phone.
I am having a hard time finding the USA firmware for the GT-N7000. I have been looking all around but cannot seem to find it.
Can anybody help me out?
Check in Samfirmware.com.
No USA firmwares
nokiamodeln91 said:
Check in Samfirmware.com.
Click to expand...
Click to collapse
Thanks, I checked that site, but the don't seem to have USA firmware for GT-N7000? Is there another country's that I can use instead?
You can use any country s rom.
THANKS
nokiamodeln91 said:
You can use any country s rom.
Click to expand...
Click to collapse
Thank you very much I'll go ahead and use the UK one since it will boot in English then.
Any tips on using Odin? Or things I should do or avoid? I don't want to brick my phone by accident.
Use the rom in pda. Don't tick anything else other than default.
You sir, are awesome.
nokiamodeln91 said:
Use the rom in pda. Don't tick anything else other than default.
Click to expand...
Click to collapse
Thank you! That was exactly what I needed to know!
I'm currently downloading the ROM, I will update after I've used ODIN.
Also my phone is at 100% battery in preparation since people said to make sure it was charged before flashing.
Slight Problem...
I'm using Odin v1.85 following the instructions above and it has gotten stuck on "NAND Write Start!" for the past 15 minutes.
It doesn't seem like it is going to do anything. What should I do?
Still? Wait for some more time. Then kill kies processes and run odin as administrator. Boot into download mode again. And try.
I'm windows inept
nokiamodeln91 said:
Still? Wait for some more time. Then kill kies processes and run odin as administrator. Boot into download mode again. And try.
Click to expand...
Click to collapse
I waited about 15 more minutes then held the power button to turn it off. So now it's off and charging again.
These may be really really dumb questions, but:
1) how do i kill kies processes?
2) And how do I run as administrator?
Sorry, I'm sorta windows inept since I've been using a macbook for the past 5 years.
Open task manager and check anything related to kies. Also make sure samsung usb drivers are properly installed. If not or in doubt, download and install kies first. Then plug the phone in and with for the drivers to install.
On the phone and check what is the message on screen, if it's a firmware recovery screen the try connecting with kies recovery option. If still stuck on logo, kill all kies process. Right click on odin and run as administrator. The put phone on download and flash.
Trying it soon
I didn't have kies installed, so I am installing it right now. So once that is installed I will try it out and let you know if it works :fingers-crossed:
Updating right now
I just started updating at 10:28
I downloaded Kies, and the screen wasn't in emergency recovery, so I killed all kies processes and then i put my phone into download mode and started ODIN v1.85 as an administrator and plugged in my phone.
By 10:29 it hit <ID:0/004> NAND Write Start!!
It's 10:45 and it's still on NAND Write Start!!
Here's the whole transcript:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLSZ_N7000XXLSO_N7000OXXLS4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
There must be problem with emmc. Use the pit file method to install correctly. Flash the pit file first with re-partition ticked and others un-ticked. See if it goes successful. Then flash your PDA with re-partition un-ticked and reboot and reset ticked.
Is there any certain pit file thread that you would point me towards?
I been looking and I found a couple, but they all vary a little and I really really don't want to brick my phone.
Use the pit file from Dr ketans flashing guide
nokiamodeln91 said:
Use the pit file from Dr ketans flashing guide
Click to expand...
Click to collapse
I went to Dr. Ketan's post http://forum.xda-developers.com/showthread.php?t=1424997 and downloaded Q1_20110914_16GB.pit
Right now I'm flashing the pit file first with re-partition ticked and others un-ticked.
What should I do if it gets stuck at <ID:0/005> DO NOT TURN OFF TARGET!!?
It's been at that step for about 7 minutes now, and I just want to know what I should do in case it doesn't move past that.
Galaxtus said:
There must be problem with emmc. Use the pit file method to install correctly. Flash the pit file first with re-partition ticked and others un-ticked. See if it goes successful. Then flash your PDA with re-partition un-ticked and reboot and reset ticked.
Click to expand...
Click to collapse
I've been flashing it for about 20 minutes now, using the pit file with only re-partition ticked. It hast't moved past <ID:0/005> DO NOT TURN OFF TARGET!!
Should i be worried, or does re-partitioning with the pit file take a long time?
Was I supposed to have the PDA file in there too while flashing, or just the pit file? I really hope I didn't f this up...
I don't want a really expensive paper weight
DEAD
It was sitting there flashing with the pit file and my friend threw a ball at me and it hit the usb cable and it unplugged my phone from the computer. Then the computer wouldn't recognize my device anymore. I tried to turn my device back into download mode to restart the process but it won't even turn on or show that it is charging when plugged in.
I guess this is the end
Unless anybody out there is a miracle worker.