(Before, sorry for my bad english, I'm French..)
I've receive my Razr i xt890 yesterday and today I have unlock the bootloader.
I've make this tuto : http://forum.xda-developers.com/showthread.php?t=1928551
Everything happen very good, my bootloader is unlock but when my phone reboot it'll go to fastboot over and over again.
In fastboot, I can see :
"AP fastboot flash moide (secure boot)
20.00 (sha - oba4DF3)
IFWI info
eMMC info
battery (okay)
connect USB data Cable
ROM-key : motorola -key
Boot mode selection menu:
- normale powerup
- recovery
- factory
- BP tools
- switch console [default: null]
- power of "
And, it's written in yellow :
" fastboot reason : flash failure
fastboot : max download size: 100MB "
In addition, the vol down button work for scroll, but the vol up button doesn't work, so, I can't select boot mode selection..
Is there a solution please?
Maybe Rsdlite can be use to flash?
Help me please. :crying:
Since your Bootloader is unlocked, try the homemade Fastboots.
But only if you're sure that it is unlocked. I got no i, but these Fastboots saved already 2 Phones in Germany (I know of these 2 Phones, maybe there're more)
Thanks. Yes it's unlock because when I boot the phone, it's written "unlock" on the Motorola logo.
But what kind of fastboot can I take?
I guess it depends on what your RazR i was before. If it was EU, then grap EU, if GB then GB.
Actually you can Flash all of them, if I'm right. But I would recommend an Fastboot of your Region... Like I said, I got no i, so I can't test anything. I just own the regular RazR to Crackflash
It was on ICS EU.
Sorry but I don't know what is a "faastboot of my region"? ^^
Thanks
PELLET Nolwenn said:
It was on ICS EU.
Sorry but I don't know what is a "faastboot of my region"? ^^
Thanks
Click to expand...
Click to collapse
In the thread download any fastboot from under the heading Retail EU
Follow the steps properly and u will be good to go
To fix Flash Failure on any phone, flash something that will work. If its a Battery Low fastboot issue and you cannot charge... you will need a factory-style cable or adapter or you can make one.
See my Home-made fastboot and pick any firmware. They will all work on an unlocked phone.
Thank u so much, It works succefully
I've just reinstal the fastboot and my phone will reborn !
Congrate u fix up. May i know the detail of commands of fastboot issue step by step after On phone on Fastboot mode? & what file size below 100MB u select.Thks.
Help me, please.
mattlgroff said:
To fix Flash Failure on any phone, flash something that will work. If its a Battery Low fastboot issue and you cannot charge... you will need a factory-style cable or adapter or you can make one.
See my Home-made fastboot and pick any firmware. They will all work on an unlocked phone.
Click to expand...
Click to collapse
Hey man, I tried to root my hpone without unlock the bootloader .. (Sorry my bad english, im from Brazil). So, the device bricks. Then i unlock the bootloader because i see only unlocked phones can be restored with yours homemade fastboots. Before i do this, i cant select any options on the fastboot. After i unlock the bootloader, i could select. But i select the "normal powerup" option. And now, is stoped in the same screen "Booting into normal mode". And i cant reboot or power off PLEASE HELP MAN.
Edit: Yesterday i sleep and my razr stil in the fastboot screen locked. When i wake up today, its off and when i turn on again, the message of the batery says that the batery is low. How i can recharge that? Again, please mattlgroff help me.
joaaoalvees said:
Hey man, I tried to root my hpone without unlock the bootloader .. (Sorry my bad english, im from Brazil). So, the device bricks. Then i unlock the bootloader because i see only unlocked phones can be restored with yours homemade fastboots. Before i do this, i cant select any options on the fastboot. After i unlock the bootloader, i could select. But i select the "normal powerup" option. And now, is stoped in the same screen "Booting into normal mode". And i cant reboot or power off PLEASE HELP MAN.
Edit: Yesterday i sleep and my razr stil in the fastboot screen locked. When i wake up today, its off and when i turn on again, the message of the batery says that the batery is low. How i can recharge that? Again, please mattlgroff help me.
Click to expand...
Click to collapse
Flash anything to fix it. Take the razr_i_boot.img and run it through cmd.
Code:
fastboot flash boot razr_i_boot.img
If it fails it will tell you an error. (Might be Battery Low). Since you can't charge in battery low you would need a special cable or a cable adapter to flash without battery.
Team Black Hat sells the factory-style adapters I highly recommend one.
Sent from my XT890 using Tapatalk 2
joaaoalvees said:
Hey man, I tried to root my hpone without unlock the bootloader .. (Sorry my bad english, im from Brazil). So, the device bricks. Then i unlock the bootloader because i see only unlocked phones can be restored with yours homemade fastboots. Before i do this, i cant select any options on the fastboot. After i unlock the bootloader, i could select. But i select the "normal powerup" option. And now, is stoped in the same screen "Booting into normal mode". And i cant reboot or power off PLEASE HELP MAN.
Edit: Yesterday i sleep and my razr stil in the fastboot screen locked. When i wake up today, its off and when i turn on again, the message of the batery says that the batery is low. How i can recharge that? Again, please mattlgroff help me.
Click to expand...
Click to collapse
How to charge it is said in the post you quoted: You need a factory-style usb cable.
With the help of that you can flash the homemade fastboot, and then you can charge the phone with your normal usb cable.
I need help!
joaaoalvees said:
Hey man, I tried to root my hpone without unlock the bootloader .. (Sorry my bad english, im from Brazil). So, the device bricks. Then i unlock the bootloader because i see only unlocked phones can be restored with yours homemade fastboots. Before i do this, i cant select any options on the fastboot. After i unlock the bootloader, i could select. But i select the "normal powerup" option. And now, is stoped in the same screen "Booting into normal mode". And i cant reboot or power off PLEASE HELP MAN.
Edit: Yesterday i sleep and my razr stil in the fastboot screen locked. When i wake up today, its off and when i turn on again, the message of the batery says that the batery is low. How i can recharge that? Again, please mattlgroff help me.
Click to expand...
Click to collapse
Please!
I have the same problem...
I tried to root without unlock the bootloader and now I got a brick.
After, I tried use the Recovery to Wipe all, but it froze in fastboot menu.
Dont enter in the Recovery and I cant flash anything with RSD LITE it give me an error:
Failed flashing process. 1/9 flash "gpt_singned" -> USB error ocurred while reading/writing.
And after I tried to do it:
Flash anything to fix it. Take the razr_i_boot.img and run it through cmd.
Code:
fastboot flash boot razr_i_boot.img
If it fails it will tell you an error. (Might be Battery Low). Since you can't charge in battery low you would need a special cable or a cable adapter to flash without battery.
Team Black Hat sells the factory-style adapters I highly recommend one.
And I got a error too.
I dont know what I can do, and it stay froze in the fastboot menu.
If it uncharge I will can recharge the batery in the fastboot and flash the firmware in the fastboot?
Thanks
Have you put the fastboot files on your desktop?
Put your boot.img on your desktop with the 3 files of fastboot(adbwinapi.dll, adbwinusbapi.dll and eprj–mfastboot.exe).
Open a terminal, write:
"cd desktop"
and after:
"fastboot flash boot razr_i_boot.img"
And if it's don't work again try an other boot.img.
http://forum.xda-developers.com/showthread.php?t=1933308
( download the fastboot files retail en UE and take only the file "boot.img", it's works fine for me so maybe it will be the same for you)
If you try with " boot.img" file, in the cmd write only:
"fastboot flash boot boot.img"
PELLET Nolwenn said:
(Before, sorry for my bad english, I'm French..)
I've receive my Razr i xt890 yesterday and today I have unlock the bootloader.
I've make this tuto : http://forum.xda-developers.com/showthread.php?t=1928551
Everything happen very good, my bootloader is unlock but when my phone reboot it'll go to fastboot over and over again.
In fastboot, I can see :
"AP fastboot flash moide (secure boot)
20.00 (sha - oba4DF3)
IFWI info
eMMC info
battery (okay)
connect USB data Cable
ROM-key : motorola -key
Boot mode selection menu:
- normale powerup
- recovery
- factory
- BP tools
- switch console [default: null]
- power of "
And, it's written in yellow :
" fastboot reason : flash failure
fastboot : max download size: 100MB "
In addition, the vol down button work for scroll, but the vol up button doesn't work, so, I can't select boot mode selection..
Is there a solution please?
Maybe Rsdlite can be use to flash?
Help me please. :crying:
Click to expand...
Click to collapse
Hello, for me is the same problem , but my phone is still locked (when Moto logo apears it is without "ulnock") What can I do in this situation?
please help me to restore my razr i
p.s.: im new in android and sorry for my bad english..
Can you go into fastboot mode? Press power off buttom and volum down during 10s and you will go into the fastboot mode. After, connect the phone to your PC and make the tuto. Try and say if it's works?
Sorry for my bad english to!
PELLET Nolwenn said:
Can you go into fastboot mode? Press power off buttom and volum down during 10s and you will go into the fastboot mode. After, connect the phone to your PC and make the tuto. Try and say if it's works?
Sorry for my bad english to!
Click to expand...
Click to collapse
Yes mate, i can go into fast boot mode so i need to do tuto again and use fast boot mode?
Yes, you must be in fastboot mode if you want unlock your phone
At last i unlock my phone (now on logo it showing unlock) , but now i dont have an idea how to install Homemade fastboots, maby somebody can help me on this?
aaasasss said:
At last i unlock my phone (now on logo it showing unlock) , but now i dont have an idea how to install Homemade fastboots, maby somebody can help me on this?
Click to expand...
Click to collapse
Download faastboot file and boot.img file here:
http://koushikdutta.blurryfox.com/G1/
http://forum.xda-developers.com/showthread.php?t=1933308 (download the file named Retail eu, dezip, and take juste the file "boot.img")
On your phone go into fastboot mode.
Connect your phone to the pc.
Put your boot.img on your desktop with fastboot file dezip, there is 3 files(adbwinapi.dll, adbwinusbapi.dll and eprj–mfastboot.exe).
Open a terminal, write:
"cd desktop"
and after:
"fastboot flash boot boot.img"
Press enter, wait....
your phone reboot!
Related
yesterday im trying to unroot my gr3 2017/p8 lite 2017 and i successfully unroot it using a flashable zip file i dont remember
that thread here in xda also.. after unrooting my phone i decided to relocked it using my flash oem relock unlock codes
after entering that codes it prompts saying would you like to relocked blah blah and i tick yes and boom it relocks after booting bam my phone stock in eRecovery i tried everything volume up plus power button all ways of button tricks and still im stock in eRECOVERY EMUI please somebody help me i think my OS also disappear even my twrp disappear.. please help me
arthro1987 said:
yesterday im trying to unroot my gr3 2017/p8 lite 2017 and i successfully unroot it using a flashable zip file i dont remember
that thread here in xda also.. after unrooting my phone i decided to relocked it using my flash oem relock unlock codes
after entering that codes it prompts saying would you like to relocked blah blah and i tick yes and boom it relocks after booting bam my phone stock in eRecovery i tried everything volume up plus power button all ways of button tricks and still im stock in eRECOVERY EMUI please somebody help me i think my OS also disappear even my twrp disappear.. please help me
Click to expand...
Click to collapse
Relock your phone again. Flash now the stock recovery. Then it's alright.
i think you didnt understand what im saying bro. i unroot and relocked already after relocking my phone got stock in eRecovery and i cant get out even unlocking again etc. still im stock
To complete your initial operation, you need the recovery. From your description, I see you had TWRP before. That will not do. Flashing in the bootloader you can only unlock with OEM. So, relock, recovery flash and then lock again.
ChinHon said:
To complete your initial operation, you need the recovery. From your description, I see you had TWRP before. That will not do. Flashing in the bootloader you can only unlock with OEM. So, relock, recovery flash and then lock again.
Click to expand...
Click to collapse
yes your right after relocking my phone i lost my twrp.. thats the time im stock in eRecovery... did you mean that i will unlock it again? not relock cause it is already relocked sir.. i will unlock it again to flash and then lock it again? the question is how? i already put my code to unlock my phone again but it doesn't work anymore cause i cant flash using adb fastboot anymore.. adb fastboot cant read my phone since i relocked.. sorr for my bad english.. i hope you understand what im saying..
My English is also not better. I understand you. Have you ever tried the device with key combi in the recovery to start, without usb cable? Separated from pc and charger?
ChinHon said:
My English is also not better. I understand you. Have you ever tried the device with key combi in the recovery to start, without usb cable? Separated from pc and charger?
Click to expand...
Click to collapse
how sir? i dont get what you mean... can you please show me a tutorial?
So I wrote it in my root tutorial:
Button combinations:
Fastboot Mode: Vol.- and Power with PC connection
Recovery: Vol. + and Power without PC connection
eRecovery: Vol. + and Power with PC connection
All system reboots always without PC connection.
Without PC connection means that the cable from the PRA is separated, only from the PC is not sufficient.
ChinHon said:
So I wrote it in my root tutorial:
Button combinations:
Fastboot Mode: Vol.- and Power with PC connection
Recovery: Vol. + and Power without PC connection
eRecovery: Vol. + and Power with PC connection
All system reboots always without PC connection.
Without PC connection means that the cable from the PRA is separated, only from the PC is not sufficient.
Click to expand...
Click to collapse
i tried it all sir fastboot mode is working but cant read my phone in adb fastboot tool
vol. up plus power button is the same it still stock on eRecovery when booting.. is my phone dead already??
With the PC program "DC Phönix" you can save it again. Unfortunately I do not know about it. Google knows more.
ChinHon said:
With the PC program "DC Phönix" you can save it again. Unfortunately I do not know about it. Google knows more.
Click to expand...
Click to collapse
i hope someone will help me with that... thanks bro for your help
i need your help here guys please help me recover my phone
Unlock again from bootloader and flash a TWRP Backup from xda thread
'
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
I have exactly the same issue. With identical error codes. Still trying to work out a solution.
on the Huawei website, the had a bootloader.img installer for older models but none for the p10/ p10 plus
Any advice would be appreciated
Let phone completely discharge even it power off automatically. Then put the phone on the charging it will boot up to system then go to settings >advanced settings>back up&reset> reset all settings
when it boot i cant see anything except black . i can only turn off or volume.
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Blackball said:
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Click to expand...
Click to collapse
it doenst work , i tried all combination. it always go to error when i tried. is it possible that some flash box could fix?
I never heard that someone killed his fastboot. Press longer the vol -
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
rosarioglen18 said:
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
Click to expand...
Click to collapse
sadly , i havent found any solution yet. sorry . i also wish to fix it
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
DallasCZ said:
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
Click to expand...
Click to collapse
thank you ,unfortunately it not possible to go to fastboot mode, when the phone on error state. pc also not detect. i apreciate the help.
1-the second link i posted is about to flash service stock firmware trough force update (vol+,vol-,power). have you tried?
2-what the phone does when you try to start the fastboot mode (connect with pc, turn phone off, turn phone on with vol- and power)?
3-what is your model number L09CxxxBxxx?
I have sam problem last 3 days and i cannot solwed
solution
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
p10 no recovery
franmasco said:
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
Click to expand...
Click to collapse
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
---------- Post added at 10:21 AM ---------- Previous post was at 10:09 AM ----------
fresigi said:
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
Click to expand...
Click to collapse
ps,,the model and VTR-L09 EUROPE, IF USE DLOAD, IS 5% BLOCK
p10 no recovery
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.[/QUOTE]
fresigi said:
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
[/QUOTE]
Hi, I was having the same problem. Mate 8 EMUI 8.
After looking everywhere and trying all the options available, I wasnt able to resolve.
Finally, I tried FunkyHuawei and got my system back through eRecovery.
Gave them the readings like version no. , build no...etc through fastboot. The required info is on their site. They then reverted with a link of the firmware which I flashed through their FuHunbrick tool. It force updates the entire full last version.
After flashing and booting, the system didnt boot but was able to go to eRecovery and restored my previous version.
If you or anyone else stuck at this error, they can try at their own risk as they dont guarantee anything.
Edit: you should and will be able to boot into fastboot once the battery is totally down and phone shuts off completely. Just press volume down button and insert usb. Try again and again if it doesnt work first time.
Thanks.
Help
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
elchino!!! said:
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
Click to expand...
Click to collapse
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
apat26 said:
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
Click to expand...
Click to collapse
Hi. I did the battery part and the part of the pressing the vol - is and connecting to pc. It started but didn't got into fastboot or bootloader, just turned on normally and then I ran the adb command "adb reboot recovery" and I had to do the battery part again. I am afraid to run "adb reboot bootloader" because the risks of the draining out the battery. I mean my phone does not enter into recovery.
Hello, I wanted to install TWRP and ROOT my phone. I flashed TWRP using adb terminal. But when I tried to boot into TWRP it was stuck on "Your device is booting now..". Then if I held the power button for few secs it rebooted normally. So I tried to google it and I found adb command that reboots to recovery
Code:
adb reboot recovery
. When I executed the command it rebooted to the "Your device is booting now.." screen and it stays like this forever. No button combination works to reboot the phone if i hold power button it reboots shows honor logo and then shows the "Your device is booting now.." screen. I waited for the battery to drain and then i put the phone on charger and when I tried to boot it, it was the same. Now when I try to reboot the phone it shows ultra low baterry symbol and then boots to "Your device..." screen.
NEM-L21; EMUI 5.0; 7.0 Nougat
Which twrp you flashed? Check the correct twrp in my signature for honor 5C repository.
TassiloBalbo said:
Hello, I wanted to install TWRP and ROOT my phone. I flashed TWRP using adb terminal. But when I tried to boot into TWRP it was stuck on "Your device is booting now..". Then if I held the power button for few secs it rebooted normally. So I tried to google it and I found adb command that reboots to recovery . When I executed the command it rebooted to the "Your device is booting now.." screen and it stays like this forever. No button combination works to reboot the phone if i hold power button it reboots shows honor logo and then shows the "Your device is booting now.." screen. I waited for the battery to drain and then i put the phone on charger and when I tried to boot it, it was the same. Now when I try to reboot the phone it shows ultra low baterry symbol and then boots to "Your device..." screen.
NEM-L21; EMUI 5.0; 7.0 Nougat
Click to expand...
Click to collapse
I think you have flashed wrong twrp.download correct twrp and flash it via adb fastboot
hassanjavaid8181 said:
I think you have flashed wrong twrp.download correct twrp and flash it via adb fastboot
Click to expand...
Click to collapse
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Crocni said:
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Click to expand...
Click to collapse
Meaning you can boot to fastboot but your pc doesn't recognise it?
Crocni said:
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Click to expand...
Click to collapse
Did you try all method to going in fastboot.by adb fastboot command or by pressing vol- and power button?
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Crocni said:
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Click to expand...
Click to collapse
Glad that you fix your device.
If it is not bothering you let it be and enjoy using your phone.
Crocni said:
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Click to expand...
Click to collapse
Can you please explain to me how did you managed to boot into fastboot? I tried waiting for the battery to drain completely. Now I can't fully charge my phone. When i connect it with charger. It starts normally charging like it would with 0% battery then after a few moments the honor logo shows up and then the screen "Your device.." shows. When I try vol- and powerbutton it vibrates and shows the red lightbolt then after few moments it boots the same way into the your device screen. When I connect it to the pc it doesn't react. I don't even hear the classic windows beep sound.
TassiloBalbo said:
Can you please explain to me how did you managed to boot into fastboot? I tried waiting for the battery to drain completely. Now I can't fully charge my phone. When i connect it with charger. It starts normally charging like it would with 0% battery then after a few moments the honor logo shows up and then the screen "Your device.." shows. When I try vol- and powerbutton it vibrates and shows the red lightbolt then after few moments it boots the same way into the your device screen. When I connect it to the pc it doesn't react. I don't even hear the classic windows beep sound.
Click to expand...
Click to collapse
Try removing the usb cable and then try to biot to fastboot. What about erecovery
shashank1320 said:
Try removing the usb cable and then try to biot to fastboot. What about erecovery
Click to expand...
Click to collapse
When I remove the usb cable it's still the same. When i try to press the power button it vibrates shows the low battery red lightbolt and dies. If you mean by erecovery emui recovery, then it looks like it's not installed.
TassiloBalbo said:
When I remove the usb cable it's still the same. When i try to press the power button it vibrates shows the low battery red lightbolt and dies. If you mean by erecovery emui recovery, then it looks like it's not installed.
Click to expand...
Click to collapse
You need to press power + volume down key to boot into fastboot. Keep trying 4-5 times sometimes it takes due to wrong press
shashank1320 said:
You need to press power + volume down key to boot into fastboot. Keep trying 4-5 times sometimes it takes due to wrong press
Click to expand...
Click to collapse
So I managed to get into the fastboot. Where can I get boot.img, recovery.img and system.img? I have downloaded some update.zip files from this russian site (first 5) http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=NEM-L21&firmware_page=0. But I don't have boot, recovery and system images in these zips.
I also tried reboot in fastboot but its still the same:
fastboot devices
8SC4C16A13006909 fastboot
fastboot reboot
rebooting...
finished. total time: 0.026s[/CODE]
TassiloBalbo said:
So I managed to get into the fastboot. Where can I get boot.img, recovery.img and system.img? I have downloaded some update.zip files from this russian site (first 5) http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=NEM-L21&firmware_page=0. But I don't have boot, recovery and system images in these zips.
I also tried reboot in fastboot but its still the same:
fastboot devices
8SC4C16A13006909 fastboot
fastboot reboot
rebooting...
finished. total time: 0.026s[/CODE]
Click to expand...
Click to collapse
Meaning the fastboot is accessible.
Now you have firmware zip, extract it amd you will get few files. Use dload method as given in my signature and you are good to go.
Else use Huawei extractor and browse to update.app you just got in above downloaded zip. You will get boot, recovery, system img you need.
I downloaded some firmware versions and extracted them. I don't know which is for my device. So I tried one of them. I flashed boot.img and recovery.img but I din't flashed the system.img, becouse it was too big. When I tried to reboot the phone it was the same. The fastboot was no longer accessible. I put the phone into servis but they didn't fixed it. it's the same but I can enter erecovery
TassiloBalbo said:
I downloaded some firmware versions and extracted them. I don't know which is for my device. So I tried one of them. I flashed boot.img and recovery.img but I din't flashed the system.img, becouse it was too big. When I tried to reboot the phone it was the same. The fastboot was no longer accessible. I put the phone into servis but they didn't fixed it. it's the same but I can enter erecovery
Click to expand...
Click to collapse
Please flash only files for your device and nothing else. Did you try dload method?
Give me model and build number, will get the correct files for you
shashank1320 said:
Please flash only files for your device and nothing else. Did you try dload method?
Give me model and build number, will get the correct files for you
Click to expand...
Click to collapse
NEM-L31 but I don't know the build number
TassiloBalbo said:
NEM-L31 but I don't know the build number
Click to expand...
Click to collapse
Build number is necessary to get right files..
hassanjavaid8181 said:
Build number is necessary to get right files..
Click to expand...
Click to collapse
I know. So do you think it's dead?
TassiloBalbo said:
I know. So do you think it's dead?
Click to expand...
Click to collapse
You should try huawei service center....
Hey guys, i have MI A2 cellphone, and after auto update programmed to three hours the smartphone show "AndroidONE" logo and then shutdown, i tried "Fastboot oem unlock", but it is my output:
PHP:
C:\Users\Lucas Daniel>fastboot oem unlock
FAILED (remote: 'Flashing Unlock is not allowed
')
Finished. Total time: 0.000s
. I'm desperate, I do not know what to try anymore, I believe I do not have unlock OEM activated, someone can help me?
Sorry for bad english, i'm from brazilian.
@LukeSkyPTBR
It's a well-known issue. One update was revoked as soon as Xiaomi has found out about phones bricking once it's installed. There's no way you can fix it by yourself except if you have ordered your phone from China (and so no warranty you have) and have experience in disassembling phones. There's a thing called test-point, do some research if you are self-assured in that area. Otherwise let your authorized service center make everything for you. It is a warranty case, either way.
sas.mar said:
@LukeSkyPTBR
It's a well-known issue. One update was revoked as soon as Xiaomi has found out about phones bricking once it's installed. There's no way you can fix it by yourself except if you have ordered your phone from China (and so no warranty you have) and have experience in disassembling phones. There's a thing called test-point, do some research if you are self-assured in that area. Otherwise let your authorized service center make everything for you. It is a warranty case, either way.
Click to expand...
Click to collapse
Thanks, looks that, unfortunately, my unique solution is test-point for activate EBL Mode... I will leave the topic open for the case of i get other solutions... after 3 days, if not get, i will close and the unique solution will really test-point.
Try rebooting it a couple of times and see if it boots. Or plug it to a charger and try booting it once it starts to charge successfully. If all fails, flashing via EDL might be your only option.
Try rebooting more than couple of time. Phone is supposed to switch to the other slot of A/B where original ROM (before update) resides. When it finally boots, get developer rights, switch on ADB Debugging and OEM unlock, thus next time update soft-bricks your phone you'll be able to unlock (or even better unlock immediately after successful boot not to loose your data in future).
Isnt Fastboot OEM Unlock command deprecated ? Shouldn't you use the unlock / unlock critical command ?
Tianhe said:
Isnt Fastboot OEM Unlock command deprecated ? Shouldn't you use the unlock / unlock critical command ?
Click to expand...
Click to collapse
What is it command?
Aerobatic said:
Try rebooting more than couple of time. Phone is supposed to switch to the other slot of A/B where original ROM (before update) resides. When it finally boots, get developer rights, switch on ADB Debugging and OEM unlock, thus next time update soft-bricks your phone you'll be able to unlock (or even better unlock immediately after successful boot not to loose your data in future).
Click to expand...
Click to collapse
How can I do it? I leave the phone in the charger for a long time? Or do you need the power button for a long time?
I tried to press the power button for 2 minutes and nothing happened.
When i leave the smartphone on the charge, after 50 minutes, show for me 100% percent, so, i pressed power button and the screen stayed lock in "AndroidONE", nothing happened, until try again press power button.
The problem original comebacked to me
LukeSkyPTBR said:
What is it command?
Click to expand...
Click to collapse
I tried, the same ploblem happenned... don't work, unfortunely... :/
LukeSkyPTBR said:
What is it command?
Click to expand...
Click to collapse
fastboot flashing unlock
fastboot flashing unlock_critical
Can't you just enter fastboot mode by holding power and vol- keys with phone connected to a PC?
(Or power and vol+, can't remember)
Phil_Smith said:
fastboot flashing unlock
fastboot flashing unlock_critical
Can't you just enter fastboot mode by holding power and vol- keys with phone connected to a PC?
(Or power and vol+, can't remember)
Click to expand...
Click to collapse
I can enter fastboot mode, but this is not enough to do run commands up. I would need unlock bootloader(OEM).
LukeSkyPTBR said:
I can enter fastboot mode, but this is not enough to do run commands up. I would need unlock bootloader(OEM).
Click to expand...
Click to collapse
If you can enter fastboot then you can go to EDL mode by typing 'fastboot reboot edl' and then use QPST to flash the latest stock rom.
LukeSkyPTBR said:
I can enter fastboot mode, but this is not enough to do run commands up. I would need unlock bootloader(OEM).
Click to expand...
Click to collapse
Do as tabun1994 said.
This will hopefully get the system up again.
The commands I wrote would unlock the bootloader. What else could I have meant?
If you succeeded with tabun's method, then you probably would only need to enable "USB debugging" and "OEM unlocking" in the ROM's developer options (which you'll enable by hitting "build number" in settings like 10 times or so).
Then you would connect the device and accept the 'trust this device' warning.
After booting to fastboot now, the commands I wrote should work and unlock the bootloader (if you even want that when your system is running again).
tabun1994 said:
If you can enter fastboot then you can go to EDL mode by typing 'fastboot reboot edl' and then use QPST to flash the latest stock rom.
Click to expand...
Click to collapse
This command needs OEM Unlock :/
this is my output: fastboot: usage: unknown reboot target edl
The test point method is actually easy , you have to dissasemble the display , easy procedure , remove the battery and short the two test points with tweezerz or something ,and in the meantime you plug the usb cable into the computer. It should install the Qusb_Hub drivers , and with miFlash you should be able to reflash the firmware . I bought a phone that was in this state and fixed it using these steps.
No more solutions, I will do the test point method, thanks to everyone who tried to help otherwise.
LukeSkyPTBR said:
This command needs OEM Unlock :/
this is my output: fastboot: usage: unknown reboot target edl
Click to expand...
Click to collapse
No it doesn't, i have tried this method on locked bootloader, go to this link - https://forum.xda-developers.com/an...e-how-to-reboot-to-edl-fastboot-t3394292/amp/
And download the fastboot_edl.7z , your phone will be in edl mode, I think you don't have the proper platform files which has caused the problem.
tabun1994 said:
No it doesn't, i have tried this method on locked bootloader, go to this link - https://forum.xda-developers.com/an...e-how-to-reboot-to-edl-fastboot-t3394292/amp/
And download the fastboot_edl.7z , your phone will be in edl mode, I think you don't have the proper platform files which has caused the problem.
Click to expand...
Click to collapse
Okays, thanks for this solution, i will get the smartphone tomorrow, if the technical assistance not resolved my problem, i will try. Thanks very much!
LukeSkyPTBR said:
Okays, thanks for this solution, i will get the smartphone tomorrow, if the technical assistance not resolved my problem, i will try. Thanks very much!
Click to expand...
Click to collapse
I execute bat archive but nothing happens in Mi A2 .-
tabun1994 said:
No it doesn't, i have tried this method on locked bootloader, go to this link - https://forum.xda-developers.com/an...e-how-to-reboot-to-edl-fastboot-t3394292/amp/
And download the fastboot_edl.7z , your phone will be in edl mode, I think you don't have the proper platform files which has caused the problem.
Click to expand...
Click to collapse
What is your smartphone?
(french) hello
I could not start in edl mode with the xda instructions but I found a videos
phone on android, connected to the computer by usb. you keep pressing the power button and the volume down button.
when the screen goes black immediately you strafe the volume + button for 2 sec.
the secret is the windows song if the phone is on. when you hear windows song strafe the volume +. i know I did it with my phone off and my phone on quite a few times
normally your computer will recognize the phone in the correct mode. if there is a problem do not forget to install these drivers and restart the computer as it will stay in edl mode and will be well supported.
QDLoader HS-USB Driver_64bit_Setup
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
that's funny visibbly before you unlock or reflash the original bootloader the phone don't have fastboot mode with me. but fastboot don't work well in windows. it work erfectly on linux ubuntu with me at exemple.
thanks for your attention
yeah, it is very easy
So this is how you go into fastboot ?
I have the V405 EBW & I am unable to go to fastboot to get the device ID.
Doush_504 said:
So this is how you go into fastboot ?
I have the V405 EBW & I am unable to go to fastboot to get the device ID.
Click to expand...
Click to collapse
no no we should not confuse.
there is download mode in originale lg phone for flash stock roms
there is "edl mode" for unlock bootloader
there is fastboot mode when you unlock the bootloader with this screen.
a tips. root first your phone. 2 backup your firmware. 3 flash twrp. i had problem because i don't do this. there is stock firmware already rooted. its easily.
bsteph27 said:
no no we should not confuse.
there is download mode in originale lg phone for flash stock roms
there is "edl mode" for unlock bootloader
there is fastboot mode when you unlock the bootloader with this screen.
a tips. root first your phone. 2 backup your firmware. 3 flash twrp. i had problem because i don't do this. there is stock firmware already rooted. its easily.
Click to expand...
Click to collapse
Unfortunately, I am unable to root because I am unable to unlock the bootloader (because I can't go to fastboot to get Device ID & send it to LG)
Doush_504 said:
Unfortunately, I am unable to root because I am unable to unlock the bootloader (because I can't go to fastboot to get Device ID & send it to LG)
Click to expand...
Click to collapse
But you can get to fastboot, just not the way you read on the internet.
The device doesn't have fastboot available, until, you put it in edl mode and use qfil to flash the 'engineering' abl. That's what gives you fastboot.
You could, at that point, use fastboot to get the info for unlock.bin. But why? because at that point you can just type 'fastboot oem unlock', and it's unlocked.
AsItLies said:
But you can get to fastboot, just not the way you read on the internet.
The device doesn't have fastboot available, until, you put it in edl mode and use qfil to flash the 'engineering' abl. That's what gives you fastboot.
You could, at that point, use fastboot to get the info for unlock.bin. But why? because at that point you can just type 'fastboot oem unlock', and it's unlocked.
Click to expand...
Click to collapse
beware to put your phone in android oreo before the unlock...... i forget this detail. and i try to unbrick my phone with testpoint. maybe i do a howto if i succes to fix my phone.
AsItLies said:
But you can get to fastboot, just not the way you read on the internet.
The device doesn't have fastboot available, until, you put it in edl mode and use qfil to flash the 'engineering' abl. That's what gives you fastboot.
You could, at that point, use fastboot to get the info for unlock.bin. But why? because at that point you can just type 'fastboot oem unlock', and it's unlocked.
Click to expand...
Click to collapse
Oh OK
I'll have to read more about that.
Thank you
bsteph27 said:
beware to put your phone in android oreo before the unlock...... i forget this detail. and i try to unbrick my phone with testpoint. maybe i do a howto if i succes to fix my phone.
Click to expand...
Click to collapse
Unlock only works with Oreo ??
I have Pie
How do I downgrade without root ?
Is it possible ?
If I can flash a firmware without root
I'd be more than happy to flash a custom rom which has LG's apps instead of Google annoying ones.
Doush_504 said:
Unlock only works with Oreo ??
I have Pie
How do I downgrade without root ?
Is it possible ?
Click to expand...
Click to collapse
you are like me your phone is "bricked". your phone don't have download mode, fastboot mode. maybe you have
edl mode 9008. but often you have to open your phone for put it in edl mode.wait my howto i hope fix mine today or tomorow and i wil do an howto to unbrick lg v40. is not very hard to solve it but it must a howto.