Help..Error Mode:No Recovery image,Load failed ( no fastboot ) - Huawei P10 Questions & Answers

Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.

I have exactly the same issue. With identical error codes. Still trying to work out a solution.
on the Huawei website, the had a bootloader.img installer for older models but none for the p10/ p10 plus
Any advice would be appreciated

Let phone completely discharge even it power off automatically. Then put the phone on the charging it will boot up to system then go to settings >advanced settings>back up&reset> reset all settings

when it boot i cant see anything except black . i can only turn off or volume.

Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.

Blackball said:
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Click to expand...
Click to collapse
it doenst work , i tried all combination. it always go to error when i tried. is it possible that some flash box could fix?

I never heard that someone killed his fastboot. Press longer the vol -

Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,

rosarioglen18 said:
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
Click to expand...
Click to collapse
sadly , i havent found any solution yet. sorry . i also wish to fix it

https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.

DallasCZ said:
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
Click to expand...
Click to collapse
thank you ,unfortunately it not possible to go to fastboot mode, when the phone on error state. pc also not detect. i apreciate the help.

1-the second link i posted is about to flash service stock firmware trough force update (vol+,vol-,power). have you tried?
2-what the phone does when you try to start the fastboot mode (connect with pc, turn phone off, turn phone on with vol- and power)?
3-what is your model number L09CxxxBxxx?

I have sam problem last 3 days and i cannot solwed

solution
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.

p10 no recovery
​
franmasco said:
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
Click to expand...
Click to collapse
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
---------- Post added at 10:21 AM ---------- Previous post was at 10:09 AM ----------
fresigi said:
​
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
Click to expand...
Click to collapse
ps,,the model and VTR-L09 EUROPE, IF USE DLOAD, IS 5% BLOCK

p10 no recovery
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.[/QUOTE]

fresigi said:
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
[/QUOTE]
Hi, I was having the same problem. Mate 8 EMUI 8.
After looking everywhere and trying all the options available, I wasnt able to resolve.
Finally, I tried FunkyHuawei and got my system back through eRecovery.
Gave them the readings like version no. , build no...etc through fastboot. The required info is on their site. They then reverted with a link of the firmware which I flashed through their FuHunbrick tool. It force updates the entire full last version.
After flashing and booting, the system didnt boot but was able to go to eRecovery and restored my previous version.
If you or anyone else stuck at this error, they can try at their own risk as they dont guarantee anything.
Edit: you should and will be able to boot into fastboot once the battery is totally down and phone shuts off completely. Just press volume down button and insert usb. Try again and again if it doesnt work first time.
Thanks.

Help
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks

elchino!!! said:
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
Click to expand...
Click to collapse
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.

apat26 said:
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
Click to expand...
Click to collapse
Hi. I did the battery part and the part of the pressing the vol - is and connecting to pc. It started but didn't got into fastboot or bootloader, just turned on normally and then I ran the adb command "adb reboot recovery" and I had to do the battery part again. I am afraid to run "adb reboot bootloader" because the risks of the draining out the battery. I mean my phone does not enter into recovery.

Related

EVA-L09 Bootloop and can't turn off

I was trying to downgrade and something went wrong.
Now i'm stuck in Huawei LOGO and can't turn off phone, he keeps turning on and freeze at Huawei Logo.
He's getting really hot.
Tried a few tools to get him at adb but no luck...
Also tried update from dload sdcard but combo keys not working either...
Any ideas?
Delete
Enviado do meu iPhone usando o Tapatalk
migueli2 said:
I was trying to downgrade and something went wrong.
Now i'm stuck in Huawei LOGO and can't turn off phone, he keeps turning on and freeze at Huawei Logo.
He's getting really hot.
Tried a few tools to get him at adb but no luck...
Also tried update from dload sdcard but combo keys not working either...
Any ideas?
Click to expand...
Click to collapse
Same problem but on EVA-AL00 running AL19C636B190
Have u tried to unlock bootloader or flash boot/recovery with fastboot mode?
I have the same problem, any ideas?
I had the same issue, three only thing that worked for me was to get the phone into recovery, vol down and power and flash through DC phoenix
My P9 make "self reset" all time, until battery gets empty. I can't get into recovery
Open hisuite enter recovery area plug phone to pc you see vol down + power screen. Press vol- and power button you must go to fastboot screen. If phone recover by hisuite thats ok.
If not, you need unlocking bootloader with srk tool ( must have unlock code ) flash twrp with command fastboot flash recovery twrp.img or use srk tool to flash twrp recovery.
Enter recovery upload files to sd card, flash L09C432B322 zip than hw_eu zip. Your phone must boot with nougat. (Of course your phone dont C432, you must use your phone B322 files)
If you dont use nougat do a rollback prosedure.
master' said:
Open hisuite enter recovery area plug phone to pc you see vol down + power screen. Press vol- and power button you must go to fastboot screen. If phone recover by hisuite thats ok.
If not, you need unlocking bootloader with srk tool ( must have unlock code ) flash twrp with command fastboot flash recovery twrp.img or use srk tool to flash twrp recovery.
Enter recovery upload files to sd card, flash L09C432B322 zip than hw_eu zip. Your phone must boot with nougat. (Of course your phone dont C432, you must use your phone B322 files)
If you dont use nougat do a rollback prosedure.
Click to expand...
Click to collapse
I have same problem ,but my is Eva 19l,not support hisuite,and I can't turn on the phone check product ID can't unlock bd ...... anything can help me?
Happy baby said:
I have same problem ,but my is Eva 19l,not support hisuite,and I can't turn on the phone check product ID can't unlock bd ...... anything can help me?
Click to expand...
Click to collapse
Use dc phoneix for unlock bootloader . (I dont use so i dont know how to use)
Did anyone ever find an working solution for this, my problem is almost identical to the OP's but mine gets stuck on the bootloader unlocked warning screen, says the phone is rebooting but never does. I'm unable to turn the phone off without it instantly restarting and hanging on the bootloader warning screen, phone also gets super warm when on this screen. HELP

My phone won't start

Hello,
i think I've broken my phone, I hope you can help me.
I followed this tutorial that you can download here : (I can't post the link because I'm a new user)
I've tried to unlock the boot loader with success, then the installer tried to install a recovery (as the text in the command window said) and the progress stopped, I have waited a couple of minutes but nothing happend and I disconected the phone from my computer (I know that was a bad idea).
Know my phone won't start, not even in the recovery mode. I can hold the Vol +, Vol - button and the power button but only the huawei logo appears, then turns the screen black and nothing more happens. I have also disconnected the battery for some minutes but this didn't change anything.
The only positiv thing is, that Fastboot still recognizes the phone when it's connected to my PC, but I still can't enter the fastboot mode.
I hope you can help me and save my phone,
thankfull Robin
Flash twrp in it, and than install persona's B602 rom.
D1stRU3T0R said:
Flash twrp in it, and than install persona's B602 rom.
Click to expand...
Click to collapse
First of all thank you for your reply. But I can't put my phone with my computer and minimal ADB in fastboot mode. The device is found with the command "adb devices" but it has only recovery status. When I type in "adb reboot bootloader" then Huawei logo flashes up and then it goes back to blackscreen.
I fixed it
I fixed the phone by myself. I'm not an expert at all and this is for the people with the same problem.
I think the problem was, that the phone won't leave the recovery mode, because it was listed with "apd devices" as "recovery" for the whole time.
So I tried to install a stock ROM via SD Card with a tool named au_temp.cfg and the phone actually did more then just turning back off when i pressed the Vol+, Vol- and Power key. So the phone actually entered the bootloader but I got the wrong stock image, but this didn't mattered because after one try the phone got back to normal mode and booted quite fine. So I think the main problem was, that my phone was stuck in a recovery mode and needed help to exit it.

Please help me purchased 15Euro DCPhoenix

Thread Closed
tell what you did, to brick phone.
what android version was before, what android wersion you tried to instal, what recovery you used. ?
oh, but if fastboot isnt working, you more or less are done. if im correct, even dc phoenix use fastboot..
"Step 1
Write compatible UPDATE.APP file in fastboot with DC Phoenix"
Arnys said:
tell what you did, to brick phone.
what android version was before, what android wersion you tried to instal, what recovery you used. ?
oh, but if fastboot isnt working, you more or less are done. if im correct, even dc phoenix use fastboot..
"Step 1
Write compatible UPDATE.APP file in fastboot with DC Phoenix"
Click to expand...
Click to collapse
i just use the SRKTool Lod Chan and try to unlocked the bootloader
and it success , after that i proceed to replace recovery with TWRP
but doesn't work . afterwards i bring back to re-lock bootloader
then the phone reboot . the phone stuck at android boot logo
no recovery no fastboot cannot identify even in PC
but when the phone gets drain and i plugged the charger on it
the phone reboots directly into the system or its OS
but when i try to power it off again ( reboot )
the same thing happen it will stuck in the boot logo
until the battery dries again ,.
i never upgrade to Nougat so my phone still in Marshmallow version
thank you .
vinfrix said:
i just use the SRKTool Lod Chan and try to unlocked the bootloader
and it success , after that i proceed to replace recovery with TWRP
but doesn't work . afterwards i bring back to re-lock bootloader
then the phone reboot . the phone stuck at android boot logo
no recovery no fastboot cannot identify even in PC
but when the phone gets drain and i plugged the charger on it
the phone reboots directly into the system or its OS
but when i try to power it off again ( reboot )
the same thing happen it will stuck in the boot logo
until the battery dries again ,.
i never upgrade to Nougat so my phone still in Marshmallow version
thank you .
Click to expand...
Click to collapse
what wersion of twrp ? link. there are MM and N versions, and, if you on MM put N version twrp, you will brick phone.. and, even with dead battery i was able to enter fastboot, when i instaled wrong twrp. but for me solution was simple, instal right twrp and all was good (ofcorse if you didnt delete system)
i can't remember the version but im sure it all arounds in 2.1...something
no i wasn't load the Nougat version because i know i am MM the only thing i remember is the TWRP i load is from SRKTool Lod Chong there was an option there to install twrp recovery
can i be able to enter the fastboot ?
if i can go over to fastboot i can repair this
but i can't go fastboot
volume rocker technique doesn't work
even using adb reboot bootloader too
when i am doing volume down ( hold )
the phone only vibrates then stuck at logo
even when its connected to adb command
when the phone reboot it stuck at the logo
can't go to fastboot ?
is there any way of forced
reflash the boot.img & recovery.img?
Hi, i have P9 L19 with C432 B210 i want to update do Android 7, but mistakely put wrong UPDATE to phone memory. Now I'm stucked at Huawei logo and cant turn off device.
Only I can get to Fastboot&Rescue Mode. After press all three buttons nothing happened, phone juest restarts and stuck at logo. I tried put right UPDATE to SD card but no luck
Bootloader: locked
FRP: locked
debbuging: off
Please help me.
no one knows how to fix our problem so sad
Please close the thread
problem issue solved!
please help me same problem as you...
JCB117 said:
please help me same problem as you...
Click to expand...
Click to collapse
Easily Unbrick Your Phone via this method
https://forum.xda-developers.com/p9/help/huawei-p9-brick-easiest-to-unbrick-t3662350

bootloop or bricked?

yesterday im trying to unroot my gr3 2017/p8 lite 2017 and i successfully unroot it using a flashable zip file i dont remember
that thread here in xda also.. after unrooting my phone i decided to relocked it using my flash oem relock unlock codes
after entering that codes it prompts saying would you like to relocked blah blah and i tick yes and boom it relocks after booting bam my phone stock in eRecovery i tried everything volume up plus power button all ways of button tricks and still im stock in eRECOVERY EMUI please somebody help me i think my OS also disappear even my twrp disappear.. please help me
arthro1987 said:
yesterday im trying to unroot my gr3 2017/p8 lite 2017 and i successfully unroot it using a flashable zip file i dont remember
that thread here in xda also.. after unrooting my phone i decided to relocked it using my flash oem relock unlock codes
after entering that codes it prompts saying would you like to relocked blah blah and i tick yes and boom it relocks after booting bam my phone stock in eRecovery i tried everything volume up plus power button all ways of button tricks and still im stock in eRECOVERY EMUI please somebody help me i think my OS also disappear even my twrp disappear.. please help me
Click to expand...
Click to collapse
Relock your phone again. Flash now the stock recovery. Then it's alright.
i think you didnt understand what im saying bro. i unroot and relocked already after relocking my phone got stock in eRecovery and i cant get out even unlocking again etc. still im stock
To complete your initial operation, you need the recovery. From your description, I see you had TWRP before. That will not do. Flashing in the bootloader you can only unlock with OEM. So, relock, recovery flash and then lock again.
ChinHon said:
To complete your initial operation, you need the recovery. From your description, I see you had TWRP before. That will not do. Flashing in the bootloader you can only unlock with OEM. So, relock, recovery flash and then lock again.
Click to expand...
Click to collapse
yes your right after relocking my phone i lost my twrp.. thats the time im stock in eRecovery... did you mean that i will unlock it again? not relock cause it is already relocked sir.. i will unlock it again to flash and then lock it again? the question is how? i already put my code to unlock my phone again but it doesn't work anymore cause i cant flash using adb fastboot anymore.. adb fastboot cant read my phone since i relocked.. sorr for my bad english.. i hope you understand what im saying..
My English is also not better. I understand you. Have you ever tried the device with key combi in the recovery to start, without usb cable? Separated from pc and charger?
ChinHon said:
My English is also not better. I understand you. Have you ever tried the device with key combi in the recovery to start, without usb cable? Separated from pc and charger?
Click to expand...
Click to collapse
how sir? i dont get what you mean... can you please show me a tutorial?
So I wrote it in my root tutorial:
Button combinations:
Fastboot Mode: Vol.- and Power with PC connection
Recovery: Vol. + and Power without PC connection
eRecovery: Vol. + and Power with PC connection
All system reboots always without PC connection.
Without PC connection means that the cable from the PRA is separated, only from the PC is not sufficient.
ChinHon said:
So I wrote it in my root tutorial:
Button combinations:
Fastboot Mode: Vol.- and Power with PC connection
Recovery: Vol. + and Power without PC connection
eRecovery: Vol. + and Power with PC connection
All system reboots always without PC connection.
Without PC connection means that the cable from the PRA is separated, only from the PC is not sufficient.
Click to expand...
Click to collapse
i tried it all sir fastboot mode is working but cant read my phone in adb fastboot tool
vol. up plus power button is the same it still stock on eRecovery when booting.. is my phone dead already??
With the PC program "DC Phönix" you can save it again. Unfortunately I do not know about it. Google knows more.
ChinHon said:
With the PC program "DC Phönix" you can save it again. Unfortunately I do not know about it. Google knows more.
Click to expand...
Click to collapse
i hope someone will help me with that... thanks bro for your help
i need your help here guys please help me recover my phone
Unlock again from bootloader and flash a TWRP Backup from xda thread
'

Question Redmi Note 11S bricked with no way out?

Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.
Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Service centre will be your best bet
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, 𝑃𝑙𝑎𝑦𝑒𝑟#2028
Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..
Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button
I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.
Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said
yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot
no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.
Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?
I will try the point test. I have Redmin Note 11s.
Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL
I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE

Categories

Resources