Question Redmi Note 11S bricked with no way out? - Redmi Note 11 (spes/spesn)

Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you

Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com

Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.

Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com

Service centre will be your best bet

Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on

Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, 𝑃𝑙𝑎𝑦𝑒𝑟#2028

Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..

Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button

I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.

Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said

yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot

no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said

Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.

Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.

Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?

I will try the point test. I have Redmin Note 11s.

Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com

Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL

I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE

Related

bricked my Mi5

Hello!
Was using 7.2.8.0 ROM out of box.
Tried to update to developer 6.5.19 but something went wrong. Now only fastboot/recovery works. Can't do fastboot oem edl - tells me it should be unlocked. Same problem with fastboot flash system - tells me device is locked. Me PC Suite doesnt recognize device at all. Tried on my laptop and PC. Help please.
any1?
Are you logged into your Mi Account on the phone? If yes I guess you have to wait for bootloader unlock and then flash rom with fastboot.
I logged in last time my phone worked.
The unlock procedure uses my phone and it cannot start so I will be unable to unlock it since only fastboot and recovery modes are available.
any other suggestions?
apply for the bootloader unlock code with your mi account (use other phone while you fix the xiaomi), wait for the unlock approval sms code, its tooks like 7 to 15 days, then download the software for the unlock bootloader process, loggin with your approved mi account, put your phone in fastboot mode, connect it to the pc press start and thats all (no need to boot in normal mode for unlock), you should have your bootloader unlocked and you will be able to enter in EDL mode and flash again the rom.
P.D. Sorry for my bad english
MiuiPTY said:
apply for the bootloader unlock code with your mi account (use other phone while you fix the xiaomi), wait for the unlock approval sms code, its tooks like 7 to 15 days, then download the software for the unlock bootloader process, loggin with your approved mi account, put your phone in fastboot mode, connect it to the pc press start and thats all (no need to boot in normal mode for unlock), you should have your bootloader unlocked and you will be able to enter in EDL mode and flash again the rom.
P.D. Sorry for my bad english
Click to expand...
Click to collapse
That's pretty much exactly what I wrote in my post XD
Have you try to flash using MiFlash?
You can download it from here
My friend also encounter this problem and what he did is:
1. Use a fresh installed notebook with Win 7
2. Use MiFlash to flash the image file.
Image file can be downloaded from here.
It should works with locked bootloader as you are flashing the stock image.
Please give it a try.
Any luck alien2k1?
I'm in the same boat, bricked Mi 5, can access bootloader and TWRP recovery, but can't turn phone on because of bootloop. I want to use Mi PC Suite to flash the fastboot rom. But, when my phone is in Fastboot mode, and I connect it to the computer with the micro USB, it says "Try connect in normal mode first then switch" . But my phone is stuck in a bootloop and I can't "connect in normal mode first." It can't detect my phone in Fastboot mode, and it can't detect my phone in "normal mode" because I can't turn the phone on in normal mode because it gets stuck in a bootloop.
My bootloader is unlocked.
I can't open MiFlash either and I can't turn on USB debugging on the phone because its stuck in a bootloop. What should I do?
wonderboy6 said:
Any luck alien2k1?
I'm in the same boat, bricked Mi 5, can access bootloader and TWRP recovery, but can't turn phone on because of bootloop. I want to use Mi PC Suite to flash the fastboot rom. But, when my phone is in Fastboot mode, and I connect it to the computer with the micro USB, it says "Try connect in normal mode first then switch" . But my phone is stuck in a bootloop and I can't "connect in normal mode first." It can't detect my phone in Fastboot mode, and it can't detect my phone in "normal mode" because I can't turn the phone on in normal mode because it gets stuck in a bootloop.
My bootloader is unlocked.
I can't open MiFlash either and I can't turn on USB debugging on the phone because its stuck in a bootloop. What should I do?
Click to expand...
Click to collapse
If you're on unlocked bootloader and can access fastboot, why don't you use the fastboot packages? There's a script provided by them in the fastboot downloads to flash everything
Sent from my MI 5 using Tapatalk
wonderboy6 said:
Any luck alien2k1?
I'm in the same boat, bricked Mi 5, can access bootloader and TWRP recovery, but can't turn phone on because of bootloop. I want to use Mi PC Suite to flash the fastboot rom. But, when my phone is in Fastboot mode, and I connect it to the computer with the micro USB, it says "Try connect in normal mode first then switch" . But my phone is stuck in a bootloop and I can't "connect in normal mode first." It can't detect my phone in Fastboot mode, and it can't detect my phone in "normal mode" because I can't turn the phone on in normal mode because it gets stuck in a bootloop.
My bootloader is unlocked.
I can't open MiFlash either and I can't turn on USB debugging on the phone because its stuck in a bootloop. What should I do?
Click to expand...
Click to collapse
Have you tried to install MIUI8 ?
wonderboy6 said:
Any luck alien2k1?
I'm in the same boat, bricked Mi 5, can access bootloader and TWRP recovery, but can't turn phone on because of bootloop. I want to use Mi PC Suite to flash the fastboot rom. But, when my phone is in Fastboot mode, and I connect it to the computer with the micro USB, it says "Try connect in normal mode first then switch" . But my phone is stuck in a bootloop and I can't "connect in normal mode first." It can't detect my phone in Fastboot mode, and it can't detect my phone in "normal mode" because I can't turn the phone on in normal mode because it gets stuck in a bootloop.
My bootloader is unlocked.
I can't open MiFlash either and I can't turn on USB debugging on the phone because its stuck in a bootloop. What should I do?
Click to expand...
Click to collapse
I am in the same ****in situation, have you solved your issue ?
thanks
Looks like everyone is in the same boat here. I have tried several methods but the Redmi Note4 wont work. Mi PCSUIT wouldnt detect my phone either. Fastboot wont work with the message "Try connect in normal mode and then switch." I am wonder what is the sure and final solution to this problem. The issue is flashing all over the internet but no specific solutions yet.
If you have any working solution, please share. Thanks
iXanza said:
If you're on unlocked bootloader and can access fastboot, why don't you use the fastboot packages? There's a script provided by them in the fastboot downloads to flash everything
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
thankful, you open my eyes!

Help..Error Mode:No Recovery image,Load failed ( no fastboot )

Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
I have exactly the same issue. With identical error codes. Still trying to work out a solution.
on the Huawei website, the had a bootloader.img installer for older models but none for the p10/ p10 plus
Any advice would be appreciated
Let phone completely discharge even it power off automatically. Then put the phone on the charging it will boot up to system then go to settings >advanced settings>back up&reset> reset all settings
when it boot i cant see anything except black . i can only turn off or volume.
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Blackball said:
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Click to expand...
Click to collapse
it doenst work , i tried all combination. it always go to error when i tried. is it possible that some flash box could fix?
I never heard that someone killed his fastboot. Press longer the vol -
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
rosarioglen18 said:
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
Click to expand...
Click to collapse
sadly , i havent found any solution yet. sorry . i also wish to fix it
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
DallasCZ said:
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
Click to expand...
Click to collapse
thank you ,unfortunately it not possible to go to fastboot mode, when the phone on error state. pc also not detect. i apreciate the help.
1-the second link i posted is about to flash service stock firmware trough force update (vol+,vol-,power). have you tried?
2-what the phone does when you try to start the fastboot mode (connect with pc, turn phone off, turn phone on with vol- and power)?
3-what is your model number L09CxxxBxxx?
I have sam problem last 3 days and i cannot solwed
solution
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
p10 no recovery
​
franmasco said:
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
Click to expand...
Click to collapse
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
---------- Post added at 10:21 AM ---------- Previous post was at 10:09 AM ----------
fresigi said:
​
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
Click to expand...
Click to collapse
ps,,the model and VTR-L09 EUROPE, IF USE DLOAD, IS 5% BLOCK
p10 no recovery
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.[/QUOTE]
fresigi said:
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
[/QUOTE]
Hi, I was having the same problem. Mate 8 EMUI 8.
After looking everywhere and trying all the options available, I wasnt able to resolve.
Finally, I tried FunkyHuawei and got my system back through eRecovery.
Gave them the readings like version no. , build no...etc through fastboot. The required info is on their site. They then reverted with a link of the firmware which I flashed through their FuHunbrick tool. It force updates the entire full last version.
After flashing and booting, the system didnt boot but was able to go to eRecovery and restored my previous version.
If you or anyone else stuck at this error, they can try at their own risk as they dont guarantee anything.
Edit: you should and will be able to boot into fastboot once the battery is totally down and phone shuts off completely. Just press volume down button and insert usb. Try again and again if it doesnt work first time.
Thanks.
Help
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
elchino!!! said:
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
Click to expand...
Click to collapse
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
apat26 said:
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
Click to expand...
Click to collapse
Hi. I did the battery part and the part of the pressing the vol - is and connecting to pc. It started but didn't got into fastboot or bootloader, just turned on normally and then I ran the adb command "adb reboot recovery" and I had to do the battery part again. I am afraid to run "adb reboot bootloader" because the risks of the draining out the battery. I mean my phone does not enter into recovery.

Lg g6 bootloop i cant do anything

Hi guys !
We had unlocked the bootloader and after that, had installed twrp but it didn't start in a few attempts. The "Your software cannot be checked for corruption" screen appeared. I had read somewhere that it's just a warning about the risk of installing custom OS and I just should go factory reset, so I did (and that was a stupid idea, I know). And then the bootloop started to happen. My PC can't see my phone and I can't turn it off in any way
To turn it off just hold the power button... while its bootlooping, it will shutdown. Connect the phone to the pc and enter the bootloader. type fastboot devices, if the pc sees it with a question mark but cannot apply the driver, download the bootloader interface driver and set it manually, now retype fastboot devices and your pc will see it in fastboot, after that, reflash twrp or your recovery of choice, wipe all, format data and install your rom of choice.
marianodelfino said:
To turn it off just hold the power button... while its bootlooping, it will shutdown. Connect the phone to the pc and enter the bootloader. type fastboot devices, if the pc sees it with a question mark but cannot apply the driver, download the bootloader interface driver and set it manually, now retype fastboot devices and your pc will see it in fastboot, after that, reflash twrp or your recovery of choice, wipe all, format data and install your rom of choice.
Click to expand...
Click to collapse
i cant turn off, is stuck on fastboot... how i can unbrick???
hold the vol- button and connect usb cable to a computer. it will connect in fastboot mode. From there you can flash twrp again.
Verity. said:
hold the vol- button and connect usb cable to a computer. it will connect in fastboot mode. From there you can flash twrp again.
Click to expand...
Click to collapse
I am having a similar issue after flashing the TWRP image - phone when into boot loop - resetting did not help. Now, it continues to reboot at the LG logo.
I was able to get it into the fastboot menu (once in like 50 times) - but am unsure of how to repeat the steps (to get it into fast boot)
Can you list the steps, and at what time do you press the vol- button, and when to connect USB cable?
Many thanks in advance
MrJoker8989 said:
I am having a similar issue after flashing the TWRP image - phone when into boot loop - resetting did not help. Now, it continues to reboot at the LG logo.
I was able to get it into the fastboot menu (once in like 50 times) - but am unsure of how to repeat the steps (to get it into fast boot)
Can you list the steps, and at what time do you press the vol- button, and when to connect USB cable?
Many thanks in advance
Click to expand...
Click to collapse
i have the same issue, cannot enter fast boot mode
Any news?
@Vargrimst @MrJoker8989
xVeenix said:
Any news?
@Vargrimst @MrJoker8989
Click to expand...
Click to collapse
unfortunately not, i believe i'll have to trash the phone
Vargrimst said:
unfortunately not, i believe i'll have to trash the phone
Click to expand...
Click to collapse
Hey! Don't lose your hope yet. I managed to fix my phone!
So first of all just to be clear - my problem was that after trying to flash ROM using Custom Recovery (in my case it was OrangeFox Recovery) my phone was stuck in bootloop and it did turn on by itself after forcing shut down.
What I did to fix it:
1. I've waited for battery to discharge
2. I've downloaded and installed on my PC:
- LG UPPERCUT - Download here - XDA
- LG Mobile Drivers - Download here - LG.COM
- Android Fastboot Drivers (not necessary needed but i wanted them just to be sure) - Download here - drive.google.com
3. After that I went to search for stock KDZ for my model and my region here (lg-firmwares.com)
4. When everything was downloaded and installed I took my phone and while holding Vol+ I've connected USB cable to my phone (make sure the second part is connected to PC before pluging in to phone) and after few seconds my phone booted into Download Mode
5. Now you need to run LG UPPERCUT - if your phone is listed in upper list then you good to go and if not, check your drivers and errors in Device Manager - select your KDZ in "BIN File", change checkbox from "REFUBRISH" to "UPGRADE", click "Start" and wait.
Your phone will reboot few times but after hitting 100% in Uppercut it will take 2-5 min and boot to stock OS!
xVeenix said:
Hey! Don't lose your hope yet. I managed to fix my phone!
So first of all just to be clear - my problem was that after trying to flash ROM using Custom Recovery (in my case it was OrangeFox Recovery) my phone was stuck in bootloop and it did turn on by itself after forcing shut down.
What I did to fix it:
1. I've waited for battery to discharge
2. I've downloaded and installed on my PC:
- LG UPPERCUT - Download here - XDA
- LG Mobile Drivers - Download here - LG.COM
- Android Fastboot Drivers (not necessary needed but i wanted them just to be sure) - Download here - drive.google.com
3. After that I went to search for stock KDZ for my model and my region here (lg-firmwares.com)
4. When everything was downloaded and installed I took my phone and while holding Vol+ I've connected USB cable to my phone (make sure the second part is connected to PC before pluging in to phone) and after few seconds my phone booted into Download Mode
5. Now you need to run LG UPPERCUT - if your phone is listed in upper list then you good to go and if not, check your drivers and errors in Device Manager - select your KDZ in "BIN File", change checkbox from "REFUBRISH" to "UPGRADE", click "Start" and wait.
Your phone will reboot few times but after hitting 100% in Uppercut it will take 2-5 min and boot to stock OS!
Click to expand...
Click to collapse
thanks, i'll try, i'm not sure about booting into download mode, as i've tried everything let's hope this time goes better... but what about the old flashing, like.. i went in a bootloop because i tryied to install Twrp, will lg uppercut overwrite everything to stock?
Yes. It will flash full Stock LG Firmware with Recovery
Vargrimst said:
thanks, i'll try, i'm not sure about booting into download mode, as i've tried everything let's hope this time goes better... but what about the old flashing, like.. i went in a bootloop because i tryied to install Twrp, will lg uppercut overwrite everything to stock?
Click to expand...
Click to collapse

Question Blackscreen loop booting

Hi,
I'm stuck with my phone: it still loopbooting every 5seconds, black screen, only retrolight.
Bootloader is unlocked. I wanted to install twrp, but fastboot says partition recovery not existing.
After reboot, i'm stuck with this mod.
Try to press volume - to go again in fastboot : phone is detected by computer, then disconnected because it's rebooting.
Do you have a solution to try for me?
Or what are EDL point? I've tried to make an ELD cable but did not work either.
How long is your bootloader keeps active? If it's about 5 - 10 seconds, you can try paste the command to flash stock recovery. I attached it if it's possible to do so (from the latest global). And by the way - THERE IS STILL NO ANY CUSTOM RECOVERY for our device, sadly. Actually there is some, but only mouse works.
The commands to paste:
fastboot flash boot twrp.img
KastenTop said:
twrp.img
Click to expand...
Click to collapse
Boot.img in this case, doesn't make much difference
Sorry but my bootloader don't stay active long enough. I just ear usb detection from PC , then one seconde later, usb disconnection sound.
Phone is still loop booting.
Can you try then pasting "fastboot oem edl" (emergency download mode). The screen should turn black
After that flash with Xiaomi Flash tool
I'm unable to enter in FastBoot mode.
Phone booting black, and every 5 seconds , reboot.
If i push "volume down " button, i hear it vibrate, but nothing. Reboot and not detected by fastboot.exe
I think i have, with all manipulation , relocked the bootloader.
My only way, will to find a way to boot in EDL mode.
Test points, which are unknown so far. You have to disassemble the phone, tho. And you can try to find these points yourself, at your own risk obviously. If you will succeed, pls tell me. We need to know the test points.
I was exactly in same trouble, use This guide that solve the issue.
How to use MTK Bypass to backup or flash secure boot MTK
This is a step by step guide showing how to flash or backup a Mediatek (MTK) secure boot device without using a custom download agent (DA). This tool disables the SLA / DAA bootrom protection A little
forum.hovatek.com
Press mobile three buttons and connect cable to pc to enter brom mode. Because mtk models don't have test point. So don't need to open mobile.
proxynet said:
I'm unable to enter in FastBoot mode.
Phone booting black, and every 5 seconds , reboot.
If i push "volume down " button, i hear it vibrate, but nothing. Reboot and not detected by fastboot.exe
I think i have, with all manipulation , relocked the bootloader.
My only way, will to find a way to boot in EDL mode.
Click to expand...
Click to collapse
EDL mode in Xiaomi mediatek are called BROM mode. Don't need to disarm the mobile.
Thanks !
I tried, it works like a charm !
You're the best man
Zaiserr2 said:
EDL mode in Xiaomi mediatek are called BROM mode. Don't need to disarm the mobile.
Click to expand...
Click to collapse
nice tip!!!! this is a very helpfull guide for solve hard brick on mtk devices. i have decided never modding this phone, excep root when i need a full backup with migrate. because is much mure complicated than snapdragons. but your post is very very helpfull for who want to try anyway

Question Can't boot into anything, only shows charging screen then turns itself off after. PLEASE HELP ME! How do I fix this???

Yesterday I unlocked my phone with the official Xiaomi unlock tool, Then it wiped everything, after setting my phone up, I flashed TWRP (not for my device but for redmi k20, I thought 9T and K20 is the same) and now I'm stuck on fastboot, I tried power button + volume buttons but still stuck on fastboot, I tried adb but still stuck, I tried Reiboot for Android but still stuck. So I used XiaoMiTool V2 (unofficial) and selected 'my device is bricked' then it asked me to select what device am I using, I selected k20 bc I thought it's the same with redmi power, after downloading a rom for an hour, it tries to install but fails because it detects that it's not k20, so I closed it and rebooted my device, now my device only shows the charging battery icon, can't boot into fastboot, can't boot into anything, PC can't detect my phone including adb. Please help me (for free), I really need your help. Thanks!
Your mistake was booting a wrong twrp and then a wrong fastboot rom. You could have saved your device when it was in fastboot mod by flashing an official fastboot rom for your device. But now your device seems hopeless. I think you have no option but to send it to a service center.
In this Case, buy only from Trusted Places! Or Learn how to Flash properly.
If the bootloader is unlocked...
Flash vbmeta.img
Then flash the suitable recovery for 9 power... It might boot to recovery then

Categories

Resources