Hi,
I'm stuck with my phone: it still loopbooting every 5seconds, black screen, only retrolight.
Bootloader is unlocked. I wanted to install twrp, but fastboot says partition recovery not existing.
After reboot, i'm stuck with this mod.
Try to press volume - to go again in fastboot : phone is detected by computer, then disconnected because it's rebooting.
Do you have a solution to try for me?
Or what are EDL point? I've tried to make an ELD cable but did not work either.
How long is your bootloader keeps active? If it's about 5 - 10 seconds, you can try paste the command to flash stock recovery. I attached it if it's possible to do so (from the latest global). And by the way - THERE IS STILL NO ANY CUSTOM RECOVERY for our device, sadly. Actually there is some, but only mouse works.
The commands to paste:
fastboot flash boot twrp.img
KastenTop said:
twrp.img
Click to expand...
Click to collapse
Boot.img in this case, doesn't make much difference
Sorry but my bootloader don't stay active long enough. I just ear usb detection from PC , then one seconde later, usb disconnection sound.
Phone is still loop booting.
Can you try then pasting "fastboot oem edl" (emergency download mode). The screen should turn black
After that flash with Xiaomi Flash tool
I'm unable to enter in FastBoot mode.
Phone booting black, and every 5 seconds , reboot.
If i push "volume down " button, i hear it vibrate, but nothing. Reboot and not detected by fastboot.exe
I think i have, with all manipulation , relocked the bootloader.
My only way, will to find a way to boot in EDL mode.
Test points, which are unknown so far. You have to disassemble the phone, tho. And you can try to find these points yourself, at your own risk obviously. If you will succeed, pls tell me. We need to know the test points.
I was exactly in same trouble, use This guide that solve the issue.
How to use MTK Bypass to backup or flash secure boot MTK
This is a step by step guide showing how to flash or backup a Mediatek (MTK) secure boot device without using a custom download agent (DA). This tool disables the SLA / DAA bootrom protection A little
forum.hovatek.com
Press mobile three buttons and connect cable to pc to enter brom mode. Because mtk models don't have test point. So don't need to open mobile.
proxynet said:
I'm unable to enter in FastBoot mode.
Phone booting black, and every 5 seconds , reboot.
If i push "volume down " button, i hear it vibrate, but nothing. Reboot and not detected by fastboot.exe
I think i have, with all manipulation , relocked the bootloader.
My only way, will to find a way to boot in EDL mode.
Click to expand...
Click to collapse
EDL mode in Xiaomi mediatek are called BROM mode. Don't need to disarm the mobile.
Thanks !
I tried, it works like a charm !
You're the best man
Zaiserr2 said:
EDL mode in Xiaomi mediatek are called BROM mode. Don't need to disarm the mobile.
Click to expand...
Click to collapse
nice tip!!!! this is a very helpfull guide for solve hard brick on mtk devices. i have decided never modding this phone, excep root when i need a full backup with migrate. because is much mure complicated than snapdragons. but your post is very very helpfull for who want to try anyway
Related
hi,
i flashed 6.5.12 by miflash in edl mode.
Flash done in miflash, but on reboot mi5 is bricked. Logo Mi and shut down.
bootloader is locked.
my devices start only fastboot mode. it don't go in edl mode. if i press powe and vol + it's don't start and shut down.
By fastboot it's don't go in edl
help me pleas
If your are logged into your Mi Account on the phone you can do this: apply for the bootloader unlock code with that MI account (use other phone while you fix the xiaomi), wait for the unlock approval sms code, its tooks like 7 to 15 days, then download the software for the unlock bootloader process, loggin with your approved mi account, put your phone in fastboot mode, connect it to the pc press start and thats all (no need to boot in normal mode for unlock), you should have your bootloader unlocked and you will be able to enter in EDL mode and flash again the rom.
P.D. Sorry for my bad english
Ehi, I know how to fix your phone.
I can link you an italian forum's thread, a guy had your same problem. You have to plug your phone to pc and press power button and vol+ button, your pc will recognize it correctly if you had installed drivers, even if your phone shuts down. Now you can enter in edl mode (maybe mi5 is already in it) and flash a rom with miflash.
Sorry for my English.
Have you try to flash using MiFlash?
You can download it from here
My friend also encounter this problem and what he did is:
1. Use a fresh installed notebook with Win 7
2. Use MiFlash to flash the image file.
Image file can be downloaded from here.
It should works with locked bootloader as you are flashing the stock image.
Please give it a try.
littleprince86 said:
By fastboot it's don't go in edl
Click to expand...
Click to collapse
Please try this method.
I had the same issue after I had relocked bootloader using command
fastboot oem lock
Click to expand...
Click to collapse
When I noticed this strange behaviour, I switched to fastboot mode again (VolDown + Power) and unlocked bootloader again using MiUnlock tool for Windows and USB data cable. After that it my phone works again. No data was lost - everything remained as before.
Hi, Im kinda new to this bootloader thingy. What happen is, i updated the razer phone 2 to Pie, but notice wifi and sim card cant be detect. Even factory reset fails. So i thought of flashing new image on it. KINDA easy on my oneplus, but im not sure where I gone wrong on this razer phone 2, i accidentally unlock the bootloader. NOW the problem is HOW to relock it back? i been follow all youtube and guides all over the place but still fails.
The state of device atm, cannot be boot into Download Mode. Everytime I plug in usb c from Windows, it will boot into unlock bootloader warning page, and continue boot into the homescreen. testing the adbtools, fastboot also to no avail. Can anyone help and guide me how to relocking it back? Maybe i type wrongly on cmd or maybe other android steps not similar to razer one etc....:crying:help much appreciated.
Hold volume down while turning on. Then fastboot flashing lock.
the stock usb doesnt send things correctly in BL mode, https://www.amazon.com/Blackweb-3-Foot-Charge-Cable-Connector/dp/B07SG7P3KZ/ worked for me. with the correct usb cable you should be able to perform the lock commands correctly. can you give us more detail of what you tried on this phone so we know if we need to provide you additional information?
https://developer.razer.com/razer-phone-dev-tools/general-instructions/
"Locking the Bootloader
Locking the bootloader is recommended for security reasons. Some applications will not work with an unlocked bootloader.
Start the Phone in Download Mode with one of the following methods:
Using the adb tool: With the Phone powered on, execute: adb reboot bootloader Enter Download Mode:
Plug in a USB cable to connect your Razer Phone to your computer, Power Off the Phone, then turn it on and immediately press and hold the Volume Down button until โDownload Modeโ appears on screen.
Lock the critical partitions of the Bootloader first by running this command: fastboot flashing lock_critical
Your Razer Phone will show you a confirmation screen. Use the Volume Up/Volume Down buttons for navigation, and press the Power button to select. Your Phone will reboot."
I can't seem to enter download mode. All I have is fastboot mode and the option to either reboot, close the phone or enter recovery mode. I would really like to lock the bootloader, but I can't seem to be able to detect my phone on my PC even though I installed the fastboot driver.
The_Vinlander said:
I can't seem to enter download mode. All I have is fastboot mode and the option to either reboot, close the phone or enter recovery mode. I would really like to lock the bootloader, but I can't seem to be able to detect my phone on my PC even though I installed the fastboot driver.
Click to expand...
Click to collapse
You must use a USB 2.0 port. The RP2 isn't detected by fastboot when connected to a 3/3.1 port.
Reznor7 said:
You must use a USB 2.0 port. The RP2 isn't detected by fastboot when connected to a 3/3.1 port.
Click to expand...
Click to collapse
I tried this, but to no avail. I tried with 2 cables I had and it keeps telling me < waiting for device > when I enter this command; fastboot flashing lock_critical
The_Vinlander said:
I tried this, but to no avail. I tried with 2 cables I had and it keeps telling me < waiting for device > when I enter this command; fastboot flashing lock_critical
Click to expand...
Click to collapse
You need to go into your device manager and select [ android bootloader interface ] while in fastboot
(french) hello
I could not start in edl mode with the xda instructions but I found a videos
phone on android, connected to the computer by usb. you keep pressing the power button and the volume down button.
when the screen goes black immediately you strafe the volume + button for 2 sec.
the secret is the windows song if the phone is on. when you hear windows song strafe the volume +. i know I did it with my phone off and my phone on quite a few times
normally your computer will recognize the phone in the correct mode. if there is a problem do not forget to install these drivers and restart the computer as it will stay in edl mode and will be well supported.
QDLoader HS-USB Driver_64bit_Setup
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
that's funny visibbly before you unlock or reflash the original bootloader the phone don't have fastboot mode with me. but fastboot don't work well in windows. it work erfectly on linux ubuntu with me at exemple.
thanks for your attention
yeah, it is very easy
So this is how you go into fastboot ?
I have the V405 EBW & I am unable to go to fastboot to get the device ID.
Doush_504 said:
So this is how you go into fastboot ?
I have the V405 EBW & I am unable to go to fastboot to get the device ID.
Click to expand...
Click to collapse
no no we should not confuse.
there is download mode in originale lg phone for flash stock roms
there is "edl mode" for unlock bootloader
there is fastboot mode when you unlock the bootloader with this screen.
a tips. root first your phone. 2 backup your firmware. 3 flash twrp. i had problem because i don't do this. there is stock firmware already rooted. its easily.
bsteph27 said:
no no we should not confuse.
there is download mode in originale lg phone for flash stock roms
there is "edl mode" for unlock bootloader
there is fastboot mode when you unlock the bootloader with this screen.
a tips. root first your phone. 2 backup your firmware. 3 flash twrp. i had problem because i don't do this. there is stock firmware already rooted. its easily.
Click to expand...
Click to collapse
Unfortunately, I am unable to root because I am unable to unlock the bootloader (because I can't go to fastboot to get Device ID & send it to LG)
Doush_504 said:
Unfortunately, I am unable to root because I am unable to unlock the bootloader (because I can't go to fastboot to get Device ID & send it to LG)
Click to expand...
Click to collapse
But you can get to fastboot, just not the way you read on the internet.
The device doesn't have fastboot available, until, you put it in edl mode and use qfil to flash the 'engineering' abl. That's what gives you fastboot.
You could, at that point, use fastboot to get the info for unlock.bin. But why? because at that point you can just type 'fastboot oem unlock', and it's unlocked.
AsItLies said:
But you can get to fastboot, just not the way you read on the internet.
The device doesn't have fastboot available, until, you put it in edl mode and use qfil to flash the 'engineering' abl. That's what gives you fastboot.
You could, at that point, use fastboot to get the info for unlock.bin. But why? because at that point you can just type 'fastboot oem unlock', and it's unlocked.
Click to expand...
Click to collapse
beware to put your phone in android oreo before the unlock...... i forget this detail. and i try to unbrick my phone with testpoint. maybe i do a howto if i succes to fix my phone.
AsItLies said:
But you can get to fastboot, just not the way you read on the internet.
The device doesn't have fastboot available, until, you put it in edl mode and use qfil to flash the 'engineering' abl. That's what gives you fastboot.
You could, at that point, use fastboot to get the info for unlock.bin. But why? because at that point you can just type 'fastboot oem unlock', and it's unlocked.
Click to expand...
Click to collapse
Oh OK
I'll have to read more about that.
Thank you
bsteph27 said:
beware to put your phone in android oreo before the unlock...... i forget this detail. and i try to unbrick my phone with testpoint. maybe i do a howto if i succes to fix my phone.
Click to expand...
Click to collapse
Unlock only works with Oreo ??
I have Pie
How do I downgrade without root ?
Is it possible ?
If I can flash a firmware without root
I'd be more than happy to flash a custom rom which has LG's apps instead of Google annoying ones.
Doush_504 said:
Unlock only works with Oreo ??
I have Pie
How do I downgrade without root ?
Is it possible ?
Click to expand...
Click to collapse
you are like me your phone is "bricked". your phone don't have download mode, fastboot mode. maybe you have
edl mode 9008. but often you have to open your phone for put it in edl mode.โwait my howto i hope fix mine today or tomorow and i wil do an howto to unbrick lg v40. is not very hard to solve it but it must a howto.
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.
Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Service centre will be your best bet
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, ๐๐๐๐ฆ๐๐#2028
Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..
Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button
I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.
Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said
yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot
no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.
Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?
I will try the point test. I have Redmin Note 11s.
Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL
I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working
tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS
Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.
What do you mean it doesn't work?
Can't enter into fastboot mode?
gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...
gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today