Hi my phone is unuseable now...
Everytime the messege Sorry! The process android.process.acore has stpped. Try again pops up.
I can't (or just don't now how to) enter recovery.
I also can't go to settings because the message pops up every 2 seconds.
When I click Force Close it goes back to the launcher.
Can I do a factory reset (I think it is solved then)?
How do I do that?
OnnoS said:
Hi my phone is unuseable now...
Everytime the messege Sorry! The process android.process.acore has stpped. Try again pops up.
I can't (or just don't now how to) enter recovery.
I also can't go to settings because the message pops up every 2 seconds.
When I click Force Close it goes back to the launcher.
Can I do a factory reset (I think it is solved then)?
How do I do that?
Click to expand...
Click to collapse
What ROM are you using right now?
LGP970 said:
What ROM are you using right now?
Click to expand...
Click to collapse
Just the stock ROM.
I can access s/w update and connect my phone as mass storage to my computer.
try factory reset
go to settings and then privacy
theaks30 said:
try factory reset
go to settings and then privacy
Click to expand...
Click to collapse
Thanks but that's the problem because when I want to enter the menu I get that message and when I press Force Close it sends me back to the launcher. I get that message every second so I cant go to settings.
I'm rather sure you only have Recovery if you installed CWM. Than just press power long and select it from that menu.
Sent from my LG-P970 using xda app-developers app
SaschaKH said:
I'm rather sure you only have Recovery if you installed CWM. Than just press power long and select it from that menu.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Thanks but I dind't have installed CWM yet. If i press power long it'll just boot and shut down and boot again (because it is forced power off during the boot)...
Press volume - (not +) button and power button same time for a while...you get into factory reset mode...
then you can have options and proceed
pvsukumars said:
Press volume - (not +) button and power button same time for a while...you get into factory reset mode...
then you can have options and proceed
Click to expand...
Click to collapse
Thank you but it just boots wheb I try that. Can't I do something with s/w update or mass storage?
There might be simpler ways but that will help definitly http://forum.xda-developers.com/showpost.php?p=21472502&postcount=1
A simple Factory Reset would probably be enough but when you can't do it.
i think there is factory reset in secret menu
try 3845#*970#
theaks30 said:
i think there is factory reset in secret menu
try 3845#*970#
Click to expand...
Click to collapse
Thank you but I also can't acces the dialer.
Isn't there any button combo?
USB debugging isnt also checked I think.
No other way that i know of since ob doesn't has some hard reset button combination
Try turning off and repairing via lg software
OnnoS said:
Thank you but I also can't acces the dialer.
Isn't there any button combo?
USB debugging isnt also checked I think.
Click to expand...
Click to collapse
What ROM do you have installed? A stock one, or a custom ROM?
Infact in both ways you can do a factory reset by:
Plug in USB cable, enable usb debugging (if you have a custom ROM, it always should be on),
download the adb package from my noob how to (see attachments)
cd to the directory containing the adb files, type:
adb reboot recovery
Now you either are in CWM and can do the wipes 1 by 1, or if you have a stock ROM, it will perform
a factory reset right away
If all of that doesnt work, you have to use smartflashtool!
N00BY0815 said:
What ROM do you have installed? A stock one, or a custom ROM?
Infact in both ways you can do a factory reset by:
Plug in USB cable, enable usb debugging (if you have a custom ROM, it always should be on),
download the adb package from my noob how to (see attachments)
cd to the directory containing the adb files, type:
adb reboot recovery
Now you either are in CWM and can do the wipes 1 by 1, or if you have a stock ROM, it will perform
a factory reset right away
If all of that doesnt work, you have to use smartflashtool!
Click to expand...
Click to collapse
It's running the stock ROM and I thought USB debugging was disabled.
Can't I put firmware on a sd card that will flash automatically without recovery or going into the menu?
OnnoS said:
It's running the stock ROM and I thought USB debugging was disabled.
Can't I put firmware on a sd card that will flash automatically without recovery or going into the menu?
Click to expand...
Click to collapse
Nope... either cwm or smartflash... sorry bro, dont know another solution...
Sent from my LG-P970 using xda app-developers app
Related
my phone has been frozen at the samsung i9000 screen ever since opening this app.... i am very new to this do not understand most concepts here.. ie. flashing a rom. If anyone can help me get my phone out of this state or has any suggestions on how i should fix this please comment.
if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)
What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.
krtken said:
if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)
Click to expand...
Click to collapse
i can get in recpvery and download mode but have no clue really how to flash a rom.. i have odin and a few otehr files but i cannot get this back to normal.
Tehpriest said:
What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.
Click to expand...
Click to collapse
the app is galaxy s tweaks or something very simalar (black and white logo) the two options i was given in the app were "YES-BREAAAAK my phone" and "NO- Im not crazy" i selected no and then my phone just reset and wouldnt turn on again ive tried everything i can do without hooking up to a comp ( as far as i know) but thx for the advice
Where did you get this from? It does not seem to be in the market.
OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.
Tehpriest said:
OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.
Click to expand...
Click to collapse
Is telling me i need recovery code, I have never received one.
Just read this so it may work for you.
disconnect the phone from USB, pull the battery, replace it, boot into recovery mode and reconnect the phone. Go back to Kies and tools firmware recovery.
In other words repeat what you have done :-s
Original post on Android Forums.
The message indicated that I would need a recovery code that could be obtained later by clicking Tools | Firmware Emergency Recovery Menu.
I was then instructed to disconnect the phone, pull the battery, boot into recovery mode and reconnect the phone which I did. The phone would not reconnect. At this point I called Samsung tech support and wasn't impressed when I was simply told to repeat the procedure. But to my surprise, the upgrade was successful the second time around. Go figure! Anyway, I was wondering if anyone else ran into the recovery code message.
Click to expand...
Click to collapse
tried to install RemICS 4.2 from the razr hd forums and when installing i did this:
format /system
wipe data/factory reset
install
reboot
phone shows unlocked bl warning then just goes black. nothing else.
tried restoring and does the same thing.
whats going on?
(using CWM recovery for XT925)
worlddominatiin said:
tried to install RemICS 4.2 from the razr hd forums and when installing i did this:
format /system
wipe data/factory reset
install
reboot
phone shows unlocked bl warning then just goes black. nothing else.
tried restoring and does the same thing.
whats going on?
(using CWM recovery for XT925)
Click to expand...
Click to collapse
can you still access fastboot in bootloader menu?
htchd2fix said:
can you still access fastboot in bootloader menu?
Click to expand...
Click to collapse
yes i can access cwm recovery/fastboot but im at school so i cant RSD stock until i get home.
well i get home and turns out now i cant access recovery or fastboot. phone does nothing when i press hold the power button either
worlddominatiin said:
well i get home and turns out now i cant access recovery or fastboot. phone does nothing when i press hold the power button either
Click to expand...
Click to collapse
Make sure you have power. Try plugging it in for a while.
aselker said:
Make sure you have power. Try plugging it in for a while.
Click to expand...
Click to collapse
Yeah that was the problem. Back to stock now. Guess now I learned to wait until I know for sure if a ROM can be flashed thru cwm.
Edit: this thread can be closed whenever.
Sent from my MB886 using xda app-developers app
A friend of mine forgot the draw pattern used to unlock the phone and i tried to reset from factory recovery mode, bu i get the next error:
-- Appling Muti_CSC --
Can't acces '/system/csc/VGR/system'
I tried to reinstall original software with Odin but i wasn;t able to do that.
Please give me an advice, i m stuck!!!!!
Thank you!
Don't look at it. Just do ur resetting.
Sent Via XDA™ Premium
Galaxy_Rohit said:
Don't look at it. Just do ur resetting.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I just i can't. I can't navigate trough menu using volume keys. only home key is working for reboot phone and ony just this button
moctavianro said:
I just i can't. I can't navigate trough menu using volume keys. only home key is working for reboot phone and ony just this button
Click to expand...
Click to collapse
What do you want to do exacly? If you want to do a factory reset you can do it form setting menu, power on your phone go to settings> Privacity Settings (or something similar) and do a factory reset
You can try to dial it too *2767*3855# to do a hard reset (I've never test it, I used to do factory reset via CWM)
resolved. volume key buttons are not working
moctavianro said:
resolved. volume key buttons are not working
Click to expand...
Click to collapse
so you can use the methodes I posted
Viper The Ripper said:
so you can use the methodes I posted
Click to expand...
Click to collapse
yes, thx, the method, wasn't unknown for me, just i didn't realised why i can 't access recovery mode menu, i thought it was a software problem
moctavianro said:
yes, thx, the method, wasn't unknown for me, just i didn't realised why i can 't access recovery mode menu, i thought it was a software problem
Click to expand...
Click to collapse
You can access typing this via Terminal Emulator (If your device was rooted)
Code:
su
reboot recovery
maybe you can use the touch cwm recovery by SpaceCaker
So as LG-P880 flashing instructions were too much hassle for my taste
Here it is a very simple way to upgrade/downgrade your phones easy peasy
Everything will be gone so backup first!
Download this:
Mirror 1:
http://s000.tinyupload.com/index.php?file_id=01589528474127578975
Mirror 2:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
Unrar and copy your downloaded new firmware inside LG Flash Tool 2014 folder
Browse to Driver folder and install/double click LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe file.
Shutdown and remove SIM&EXTSDCARD from the back of the phone. Leave battery in-place don't take it out.
Press and hold Vol(-) connect usb cable coming from pc->download mode
Run LGFlashTool2014.exe
Selections
CDMA or 3GQCT doesn't matter really
DIAG
KDZ file location
then select preferred flash mode
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
Done, enjoy!
Update:
If you get
This mode is for data backup at service center ...
Click to expand...
Click to collapse
in recovery repeat flashing the KDZ and you will get the stock recovery this time.
Wow, thx Demetris, you are my savior just in time.
With the online upgrade the phone is always stuck in a bootloop and the old offline method just didn't work as it gave me a file extract error, although I know I've done everything correct (maybe the issue was leaving the sim and sd card inside or selecting 3GQCT?)
Btw and fyi, the CSE method is only available if CDMA is selected.
Thanks for making this fast and simple tutorial that even works ^^
Thank you for the great tutorial. I tried exact accordance with my LG-P880 to update. Unfortunately it did not work, the device starts but then remains at the LG logo, no further reaction. Restart / reset no improvements. Options in Android System recoveryy <3e> do not work. Do you have an idea how I can still save my beloved P-880?
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol +(99% of times you need to use - but for me was +) and press power on. On stock recovery factory reset and now phone will boot
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
jo dollert said:
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
Click to expand...
Click to collapse
Did you erase nv partition? from stock recovery?
If not check this V20c md5: 8dd721c1c6ec63c74d42b2931de8456f
KDZ
where can we find the original KDZ files?
Thanks in advance! :highfive:
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
jo dollert said:
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
Click to expand...
Click to collapse
For me it worked without a factory reset, just flashing and restarting.
Forget what I said, i think I did a factory reset and wiped nv partition before I flashed the new firmware with this tutorial.
@alberteske all firmwares can be found here: http://lg-phone-firmware.com/index.php?id_mod=15
but some links are broken, after clicking on a link you have to replace the "%2F" at the end of the adress with a "/"
Demetris said:
Did you erase nv partition? from stock recovery?
If not check this V20c md5: 8dd721c1c6ec63c74d42b2931de8456f
Click to expand...
Click to collapse
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
baseband change without flashing whole kdz?
isn't a way to extract the baseband files and flash them without having to flash kdz + unlock + re-install everything...?
thanks a lot in advance Demitris!
jo dollert said:
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
Click to expand...
Click to collapse
You sure is a P880 and not a P880G?
Demetris said:
You sure is a P880 and not a P880G?
Click to expand...
Click to collapse
Yes, LG-P880
jo dollert said:
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
Click to expand...
Click to collapse
also for me it comes now only to recovery mode.
thats it now.
what to do ?
shows:
"This mode is for data backup at service center ..."
See no chance to make a factory reset
---------- Post added at 07:49 PM ---------- Previous post was at 07:45 PM ----------
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
it comes now only to recovery mode.
thats it now.
what to do ?
shows:
"This mode is for data backup at service center ..."
See no chance to make a factory reset
I cant go on... stucked on Bootloader..:
S/W Upgrade
Please wait
while upgrading...
i did what you wrote but cant go forward. I got this message after trying to put: normal flash: Please run or install ActiveSync program
/edit:
Connection to server fialed. Try again in a moment. (pressed OK).
now i am stucked at:
Upgrading your phone....
Do not disconenct your phone or remove you battery until upgrade is completed. Calling and messagin functions are not available druging the update process......
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
ok.
Think here you mean:
press and hold [vol -] and [power] until you got the "android recovery figure"
then clear cache and make factory reset
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
Somehow my phone got to the LG logo but is in bootloop. Tryed vol+ and power. I can get to stock recovery, but how to factory reset from there?
Reboot phone
ADB sideload
Factory reset
...something like that
I think that you must see that options when enter recovery(vol- and power button),then using volume buttons select factory reset and confirm with power button. I also have bootloop after flashing kdz but after factory reset phone boot properly.
BTW i use flash kdz tutorial not that method from Demetris
Sent from my Optimus 4X HD using XDA Free mobile app
xperia u20i said:
Reboot phone
ADB sideload
Factory reset
...something like that
I think that you must see that options when enter recovery(vol- and power button),then using volume buttons select factory reset and confirm with power button. I also have bootloop after flashing kdz but after factory reset phone boot properly.
BTW i use flash kdz tutorial not that method from Demetris
Sent from my Optimus 4X HD using XDA Free mobile app
Click to expand...
Click to collapse
correct.
used his new tool and tutorial. It worked then.
EB20XY said:
correct.
used his new tool and tutorial. It worked then.
Click to expand...
Click to collapse
i am stucked (again on LG logo)... pressed vol+ and power on and i see the Revocery mode (by LG) - written: This mode is for data backup at service center. After removing and reataching batter press power key to reboot and keep it using. Well this aint working... Only home button works (in recovery mode) and i dont see anything else, where to make a factorty reset...
/edit:
vol- and power got me into the recovery menu. Factory reset and now its no bootloop. Well let me see on...
Vol- was the key
Sent from my Optimus 4X HD using XDA Free mobile app
I use this guide: http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
But I cant find recovery.img on my phone and I use another recovery. Now I want to go in Recovery Mode but I have only LG logo and in left up corner is:
[490] fastboot_int()
[590] USB init ept @ 0xffdc000
[610] udc_start()
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
damianww said:
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
Click to expand...
Click to collapse
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
olinojephanko said:
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
Click to expand...
Click to collapse
But which is on my D-405N?
damianww said:
But which is on my D-405N?
Click to expand...
Click to collapse
all of them, its for all lg l90 D4xx devices.
I recommend using this one TWRP_2.8.4.0_160115_L90.img
Ok It's done, thank you. But i have another problem... I put on my SD card ROM but Team Win Recovery Procjet doesn't see zip file. Why? SD card must be in Ext2?
sd card should be in fat32
make sure you are looking into right directory, in twrp you can choose between internal and external sdcard. if you cant see it on external memory try putting it into internal.
I have another problem... -.- I install ROM but when i turn on phone is LG logo, T-mobile logo and I wait and nothing. Someone can help me?!
which rom did you install?
maybe try to do full wipe and reinstall it
olinojephanko said:
which rom did you install?
maybe try to do full wipe and reinstall it
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/development/rom-crystal-pa-8-0-crx-team-t2928842
But how can I go into Recovery Mode? System stopped on T-mobile logo..
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
HOW TO BOOT INTO RECOVERY PRESSING VOLUME AND POWER KEY
You can reboot to recovery via flashify app or following key combination: -
Power of your phone press both Volume Down + Power Button same time, As soon as the LG logo appears release both buttons and immediately press and hold same buttons (Volume Down+Power) again. Now Factory data reset screen will appear saying "Erase all user data & restore default settings?". Use volume down key to select "Yes" and press power button to confirm and now you should be in recovery.
Click to expand...
Click to collapse
olinojephanko said:
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
Click to expand...
Click to collapse
I make factory reset and i have Crystal PA (I don't install that after factory reset O.O) Thanks a lot!!