Now what, booting into sticky bit fastboot - Motorola Atrix HD

I was having some issues with my phone shutting down so I attempted to wipe and use rds to install the stock firmware. Now I am stuck in this sticky bit fastboot. Am I screwed or is there an option to fix this? Thanks.
Joe

SUCCESS
re downloaded files and tried again, SUCCESS!!!

I've redownloaded many times and still boots into sticky bit :s
Sent from my MB886 using xda app-developers app

Av8tor86 said:
re downloaded files and tried again, SUCCESS!!!
Click to expand...
Click to collapse
can you upload your correct firmware file dude.
i try the everything. we need to unlocked bootloader

Download from here.
http://forum.xda-developers.com/showthread.php?t=1885561
Hold power and volume down to boot into bootloader and use rds lite. I also did a factory reset. Kept trying till it worked.
Sent from my MB886 using xda app-developers app

Av8tor86 said:
Download from here.
http://forum.xda-developers.com/showthread.php?t=1885561
Hold power and volume down to boot into bootloader and use rds lite. I also did a factory reset. Kept trying till it worked.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I also have this problem now on my AHD. im also desperate and suicidal...lol..
ill try your test procedures. thanks

Related

[Q] D3 Stuck on Motorola Logo after restoring

I went to restore my backup via clockwork mod and now my phone is stuck on the Motorola Logo. Any suggestions? Need help. Can't get into recovery through Bp Tools.
check out this RSD thread
http://forum.xda-developers.com/showthread.php?t=1255198
you can flash the fastboot by going into recovery.
MrJudylicious said:
check out this RSD thread
http://forum.xda-developers.com/showthread.php?t=1255198
you can flash the fastboot by going into recovery.
Click to expand...
Click to collapse
Can't get rsd lite to install on my computer. Don't know what I'm doing wrong. Follow the instructions to the letter and nothing.
I was able to use Psouza unbrick script and it got my phone up and running. Thank you very much for your reply though.
Sent from my DROID3 using XDA App
Joe.cotto said:
I was able to use Psouza unbrick script and it got my phone up and running. Thank you very much for your reply though.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
This?
http://forum.xda-developers.com/showpost.php?p=17427668&postcount=84
Nah. It's on Rootzwiki under "Unbrick DROID 3". I have the link at home.
Sent from my DROID3 using XDA App
Joe.cotto said:
I went to restore my backup via clockwork mod and now my phone is stuck on the Motorola Logo. Any suggestions? Need help. Can't get into recovery through Bp Tools.
Click to expand...
Click to collapse
use x + power button and go to android recovery
1. press x first then power button
2. when the m logo shows let go the power button but keep pressing the x
3. when triangle shows, press volume up and down at the same time
then the screen will show android system recovery
do a wipe cache first then wipe data/factory reset
then reboot your phone..
if this doesn't work, sbf is the only choice left as far as i know of
Joe.cotto said:
Can't get rsd lite to install on my computer. Don't know what I'm doing wrong. Follow the instructions to the letter and nothing.
Click to expand...
Click to collapse
Even if RSD lite 5.5 is usually working even on win vista and seven X64, XP is still the better choice to flash phones.
Use it, even virtualized.
I was able to get it running again using the Psouza script. Thank you guys. I keep all that in mind if it happens again.
Sent from my DROID3 using XDA App

[Q] Question About Returning Phone

I unbricked my phone by emergency flashing to V4 using the guide. I was stuck in test mode. Is my phone completely standard now? Should I do anything else before sending it back?
Try to boot into CMW by holding power and volume down. If it loads cmw then you're not stock. Or if you are able to update software over the air.
Sent from my VS910 4G using xda app-developers app
Thanks!
Spectre1206 said:
Try to boot into CMW by holding power and volume down. If it loads cmw then you're not stock. Or if you are able to update software over the air.
Sent from my VS910 4G using xda app-developers app
Click to expand...
Click to collapse
It asked for a factory reset when I did the power and volume. I cannot get updates over the air. I must me back to stock.
I'd you can't get updates then you're not stock. You are most likely rooted still. Try running the All in One that SPC Hicks made. And un root with that.
Sent from my VS910 4G using xda app-developers app
Use the volume and power button to get to where it asks about factory resetting. Then confirm twice. If you factory reset the phone then you're good. if it boots to cwm, then you still have some work to do.
To check for root, download root checker from the market.
Sent from my VS910 4G using xda app-developers app
Reset
I.M.famous XMAN said:
Use the volume and power button to get to where it asks about factory resetting. Then confirm twice. If you factory reset the phone then you're good. if it boots to cwm, then you still have some work to do.
To check for root, download root checker from the market.
Sent from my VS910 4G using xda app-developers app
Click to expand...
Click to collapse
I did the factory reset as you suggest and sent it back to big red. Hopefully now issues with my return.
red1050 said:
I did the factory reset as you suggest and sent it back to big red. Hopefully now issues with my return.
Click to expand...
Click to collapse
I'm confused as to how to install factory rom. Can anyone please point me in the right direction?

[Q] phone stuck on carrier logo load screen

ok so i tried to flash CM9 coming from gingerbread, i followed all the instructions and it all went well until it rebooted then it got stuck on the carrier logo ( att) and will not go any further. and way to recover? or is this a hard brick? oh and if it matters the kernal i was using was Corn
Try using the button combo to reboot into recovery and then reinstall ur Rom.
Sent from my SGH-I897 using xda premium
anonlos 8707
4-2ndtwin said:
Try using the button combo to reboot into recovery and then reinstall ur Rom.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
i did try that and it seems like its trying so i dont believe its one of the models that dont have that button combo also some things i forgot to mention is i was using clockwork recovery, and do have the original rom backed up on my external sd and also have back ups of verything titanium will back up if that helps narrow down a solution
rhvk37 said:
i did try that and it seems like its trying so i dont believe its one of the models that dont have that button combo also some things i forgot to mention is i was using clockwork recovery, and do have the original rom backed up on my external sd and also have back ups of verything titanium will back up if that helps narrow down a solution
Click to expand...
Click to collapse
Nope, not a brick. You probably have a working button combination, but the recovery simply isn't there. You need to boot into download mode and flash a kernel.
Sent from my SGH-I777 using xda premium
korockinout13 said:
Nope, not a brick. You probably have a working button combination, but the recovery simply isn't there. You need to boot into download mode and flash a kernel.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
well got it into download mode... only problem is computer wont recognize it
See if this thread helps.... Captivate PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SGH-I897 using xda premium
korockinout13 said:
Nope, not a brick. You probably have a working button combination, but the recovery simply isn't there. You need to boot into download mode and flash a kernel.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
thanks that fixed it. my phone is now awesome.

Is my Nexus completely dead?

Long post but can't really shorten it.
32GB wifi Nexus, rooted and was running Liquid Smooth ROM and Motley kernel, went to update the ROM to rc9 version ,anytime I updated previously I never done full wipe unless using different ROM, anyway flashed the ROM and the gaaps with it and rebooted, immediately and prompted to me to use either apex or Holo HD I choose Holo HD got error saying system ui not responding, tried apex and got the same.
I was on the main screen but couldn't access it, yet I could pull down and enter into settings, everything else looked to be ok, so rebooted back to recovery and tried fixing permission, rebooted and got the same so I though I'll be just restore my nandroid backup, to my astonishment all the data had been wiped, I didn't do a wipe at all so I'm baffled how this happened.
Anyway I done a factory reset and rebooted and went through the setup, got the same system ui not responding, went to settings which could still access, apps and un installed both Apex and Holo HD noticed that Liquid Smooth rc9 had installed but instead of showing the cm kernel it still showed motley kernel.
Back to recovery, factory reset twice, wiped cache and dalvik, rebooted, went through set up process, same system ui error again, went to settings, erased all data, tablet rebooted, set up process same again, system ui, so I'm getting worried so back to recovery and this time I selected format system, data and sd, card and now I think I've completely fuc#ed it up as it just hangs at the Google screen and has stayed like that for over 30 minutes.
Previously asides from the occasional force close issue in the 2 months I've had the Nexus not really had a problem with it and whilst I'm no developer or techy geek I'm certainly no noob when it comes to this type of thing but I'm very concerned now and hoping someone can be of assistance as I sold laptop and primary just use my Nexus (and Galaxy S3)
Thanks
Sent from my GT-I9300 using xda app-developers app
Strange.. But I didn't understand well, after wiping /system, did you flash the ROM back ?
I think you should flash 4.2.1 factory image using toolkit or whatever, then root etc..again
No all the data had been wiped this is what is baffling me, I didn't do a factory reset I just flashed the ROM and gaaps, as I said initially it was the system ui error I was getting but I think I've fucjed it up by formatting the system, data and sd card as all I can see now is the Google screen at boot, I can still get into clock work mod recovery but I've exhausted all avenues as it were, is there any hope I can get it back working again?
Sent from my GT-I9300 using xda app-developers app
j3r3myp said:
Strange.. But I didn't understand well, after wiping /system, did you flash the ROM back ?
I think you should flash 4.2.1 factory image using toolkit or whatever, then root etc..again
Click to expand...
Click to collapse
Is that Mr skips Nexus 7 toolkit?
Sent from my GT-I9300 using xda app-developers app
Download Google Stock Image and Flash the System.img File ...Tablet will be fine after that.
manasgirdhar said:
Download Google Stock Image and Flash the System.img File ...Tablet will be fine after that.
Click to expand...
Click to collapse
Thanks can you give me more instructions how I go about doing that, any links, etc
Sent from my GT-I9300 using xda app-developers app
jonny68 said:
Is that Mr skips Nexus 7 toolkit?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes ! Really easy to use. You'll just have to put the tab into fastboot mode give it a try I'm pretty sure it will solve everything and you'll start back with good bases as it is full stock !
Sent from my Nexus 7 using Tapatalk HD
Cheers but I don't see anything in clockwork mod recovery for fastboot mode, I'll go to an Internet cafe tomorrow and do it if I could just get specific instructions.
Thanks again folks for your assistance
Sent from my GT-I9300 using xda app-developers app
jonny68 said:
Cheers but I don't see anything in clockwork mod recovery for fastboot mode, I'll go to an Internet cafe tomorrow and do it if I could just get specific instructions.
Thanks again folks for your assistance
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hold power and volume up and down all for like 10-15 seconds. Tablet will boot into bootloader/fastboot mode
Sent from my Nexus 7 using xda app-developers app
malikadnanm said:
Hold power and volume up and down all for like 10-15 seconds. Tablet will boot into bootloader/fastboot mode
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
That is what I've always done but all I can see is - start - restart bootloader - recovery mode - power off, and I cannot see anything for fastboot mode (unless I'm going blind)
Sent from my GT-I9300 using xda app-developers app
jonny68 said:
Thanks can you give me more instructions how I go about doing that, any links, etc
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
First Download and install the fastboot drivers...Download the stock Image here:-
https://developers.google.com/android/nexus/images
then hold volume-(Down) Button and while holding the Button power on the device..it will take you into the bootloader. Now conne4ct the nexus to your PC...Now extract the file you downloaded (the Stock image)..keep extracting the files till you get the system.img file.Use fastboot to flash that(the command):
fastboot flash system system.img
Boot into fast boot, push a stock image. Ta da. Easy stuff. The basics.
Sent from my A100 using xda app-developers app
manasgirdhar said:
First Download and install the fastboot drivers...Download the stock Image here:-
https://developers.google.com/android/nexus/images
then hold volume-(Down) Button and while holding the Button power on the device..it will take you into the bootloader. Now conne4ct the nexus to your PC...Now extract the file you downloaded (the Stock image)..keep extracting the files till you get the system.img file.Use fastboot to flash that(the command):
fastboot flash system system.img
Click to expand...
Click to collapse
Right cheers ill give this a go tomorrow pretty new to the Nexus used to Samsung
Sent from my GT-I9300 using xda app-developers app
jonny68 said:
Right cheers ill give this a go tomorrow pretty new to the Nexus used to Samsung
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ah..We were all new to this once..you will get the Hang of it..If you need further help please do let me know.Always happy to help.

Official AT&T ICS 4.0.4 V30B Bin Files

V30b Bin Files Unzip And Flash With LG Flash Tool Enjoy
https://docs.google.com/file/d/0BzCKJUBO9hRsYzlwRHdma3BMa3M/edit?usp=sharing
is it rootable
Sent from my SAMSUNG-SGH-I747 using xda premium
kornklown69 said:
is it rootable
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes use this tool too flash recovery http://forum.xda-developers.com/showthread.php?t=2144738 then flash this to root http://www.mediafire.com/?t2tz6xp7zfwqldo
ready to see some custom stuff done with this
Sent from my SAMSUNG-SGH-I747 using xda premium
Do we know if they ever fixed the ghost call problem, never updated my phone to gingerbread because of this!
Sent from my ICS Touchpad using xda app-developers app
Error 27% no foud dll...from lg flash tool...
Sent from my LG-P925 using xda app-developers app
dll
yehison said:
Error 27% no foud dll...from lg flash tool...
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
heres the dll i used https://docs.google.com/file/d/0BzCKJUBO9hRsWDRGSV8xOU9PZ0k/edit?usp=sharing
Ready ics on lg optumus thrill 4G..
Sent from my LG-P925 using xda app-developers app
So, would those files only work if I flash when I am on ICS ?
Where do I get the ICS zip from?
I made the mistake of flashing to CM10, and haven't been able to use my phone ever since (No IMEI or network)
Hi i tried to flash it and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
coolshah said:
Hi i tried to flash it and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
Click to expand...
Click to collapse
Try going back to GB v20P then flash again
Bigtech313 said:
Try going back to GB v20P then flash again
Click to expand...
Click to collapse
this thread has this solution
http://forum.xda-developers.com/showthread.php?p=39371802#post39371802
coolshah said:
Hi i tried to flash it and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
Click to expand...
Click to collapse
long press to shut down. Hold power + vol DOWN to get text factory reset screen. Power button twice to confirm. Let it reboot
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
Bigtech313 said:
Try going back to GB v20P then flash again
Click to expand...
Click to collapse
Try this first
long press to shut down. Hold power + vol DOWN to get text factory reset screen. Power button twice to confirm. Let it reboot
drastic its Vol-
Mohhamad Rehan said:
drastic its Vol-
Click to expand...
Click to collapse
You are correct. I get that one mixed up with driver install, flashing etc. sometimes.

Categories

Resources