[Q] [PETITION][PORT-ROM] JELLY-BLAST FOR GALAXY ACE i, PLEASE ! - Galaxy Ace S5830i General

Hello, first at all, thank you all developers of this device. I have a petition for you: can you port the JELLY-BLAST ROM for our galaxy ace?
Into the main thread the developer says that this rom can work in all samsungs devices (with a few modifications and other kernel). This is the link to the main thread:
http://forum.xda-developers.com/showthread.php?t=1679563
PORTING:
Want to port this ROM to another device? Well these are some simple rules and tips to get you started:
RULES:
Name of the ROM should be JELLYBLAST.
You should PM me before doing this.
You can port this to ANY other device except GALAXY Y, because I've done it!
You should mention my name, with a link to this page.
Please take care that there should not be two JELLYBLAST roms for the same device. If you think you can improve on someone else's work, kindly talk to him via PM, and make a team.
If you have done some remarkable improvements on this ROM, please tell me, so that I can also add them.
Please adhere to rules.
TIPS:
This ROM is readily compatible ( with a few modifications ) on all SAMSUNG brodcom devices, like Galaxy ACE plus, Galaxy Pop Plus, Galaxy Mini 2, Galaxy Ace 2, Galaxy Y pro and DUOS ( but need lots of smali changes).
The kernel included in this ROM is for Galaxy Y only. So, make sure that you have removed or replaced boot.img and bmlunlock from ROM before porting.
Also, change the updater script, so that it only installs the ROM, not the Kernel.
The FM rado in the ROM only works at 120 resolution. So, replace it with the fm radio apk of your device before setting the correct resolution.
Figure out other changes by yourself!
Thank you very much !!!

The images wouldn't look very good in our device as jelly blast comes optimized for the low resolution screen.
I'm planning on grabbing the next firmware released (probably XXLI2) and creating a nice clean ROM from scratch, theming it towards a jelly bean/jelly-blast feel. But it depends on how long it takes for samsung to release that firmware.

manuelma said:
Hello, first at all, thank you all developers of this device. I have a petition for you: can you port the JELLY-BLAST ROM for our galaxy ace?
Into the main thread the developer says that this rom can work in all samsungs devices (with a few modifications and other kernel). This is the link to the main thread:
http://forum.xda-developers.com/showthread.php?t=1679563
PORTING:
Want to port this ROM to another device? Well these are some simple rules and tips to get you started:
RULES:
Name of the ROM should be JELLYBLAST.
You should PM me before doing this.
You can port this to ANY other device except GALAXY Y, because I've done it!
You should mention my name, with a link to this page.
Please take care that there should not be two JELLYBLAST roms for the same device. If you think you can improve on someone else's work, kindly talk to him via PM, and make a team.
If you have done some remarkable improvements on this ROM, please tell me, so that I can also add them.
Please adhere to rules.
TIPS:
This ROM is readily compatible ( with a few modifications ) on all SAMSUNG brodcom devices, like Galaxy ACE plus, Galaxy Pop Plus, Galaxy Mini 2, Galaxy Ace 2, Galaxy Y pro and DUOS ( but need lots of smali changes).
The kernel included in this ROM is for Galaxy Y only. So, make sure that you have removed or replaced boot.img and bmlunlock from ROM before porting.
Also, change the updater script, so that it only installs the ROM, not the Kernel.
The FM rado in the ROM only works at 120 resolution. So, replace it with the fm radio apk of your device before setting the correct resolution.
Figure out other changes by yourself!
Thank you very much !!!
Click to expand...
Click to collapse
i port this rom to s5830i but phone (dialerTabActivity) not work it's force close....
can u help me....? please ( i'm not a developer its my first ported rom )
thanks in advance

h_09 said:
i port this rom to s5830i but phone (dialerTabActivity) not work it's force close....
can u help me....? please ( i'm not a developer its my first ported rom )
thanks in advance
Click to expand...
Click to collapse
hello thanks !! you can try to change the phone.apk into system/apps for other thats works fine into galaxy i (for example take it of other rom, or stock rom). I'm sorry because I haven't got this device. I have request this rom for my girlfriend's device.
you are the best man !!

manuelma said:
hello thanks !! you can try to change the phone.apk into system/apps for other thats works fine into galaxy i (for example take it of other rom, or stock rom). I'm sorry because I haven't got this device. I have request this rom for my girlfriend's device.
you are the best man !!
Click to expand...
Click to collapse
ya but not work..
phone icon invincible from app drawer and dock....
may service is stoped working....
sorry for bad english

h_09 said:
ya but not work..
phone icon invincible from app drawer and dock....
may service is stoped working....
sorry for bad english
Click to expand...
Click to collapse
Take the DialerrTabActivity.apk from another rom extract it with apk manager then zip it and resign it it should work.
If you want to make the original DialerTabActivity work you should extract it and change ldpi in the directories names to mdpi.but there is a problem with the pngs they are small.
Edit:Sorry it doesn't work.

Styrke said:
Take the DialerrTabActivity.apk from another rom extract it with apk manager then zip it and resign it it should work.
If you want to make the original DialerTabActivity work you should extract it and change ldpi in the directories names to mdpi.but there is a problem with the pngs they are small.
Edit:Sorry it doesn't work.
Click to expand...
Click to collapse
ya not works...

hey it's possible to port jellyblast's system ui only on our s5830i...?
if possible please tell me how to do that.
thanks in advance
sorry for bad english

I found a problem with the menu button in Wifi settings and Messaging, when I press the menu button it forces to close.
Adb says: E/AndroidRuntime( 3780): android.content.res.Resources$NotFoundException: File r
es/drawable-ldpi/ic_menu_manage.png from drawable resource ID #0x20200ed
Checked in framework-res.apk but the file exists.
Any help would be appreciated
Edit: Fixed by changing the icon address from wifisettings.smali to the one in public.xml from Framework-res.apk.I have to do it also for Messaging and for apn.

you should resize your framework-res.apk,system-ui.apk.dialertabactivity.apk,and phone.apk
http://forum.xda-developers.com/showthread.php?t=1625862
i tried to port it to galaxy ace s5830 but got stuck how did you change the kernel ?? if you could just guide me id be able to port it to gt-s5830 also!!

Delta33 said:
you should resize your framework-res.apk,system-ui.apk.dialertabactivity.apk,and phone.apk
http://forum.xda-developers.com/showthread.php?t=1625862
i tried to port it to galaxy ace s5830 but got stuck how did you change the kernel ?? if you could just guide me id be able to port it to gt-s5830 also!!
Click to expand...
Click to collapse
I didn't add the kernel to the rom.Try to delete the files boot.img and bmlunlock and update the updater-script.

Nyc rom...
Thanx
Sent from my GT-S5830i using xda premium

Related

(GUIDE) How to port roms!

As the title speaks, here is a guide on porting roms.
For porting roms from fit,
1.download the rom (obviously)
2.Extract the rom through winrar
3.Go to system folder
4.Go to system/lib/modules. Delete everything there and replace with the ones for our device.
5.Then go to system/lib/hw. delete everything there and replace with yours.
( The "/hw" directory as you can see contains the files which control the sensors and lights such as GPS and the accelerometer. )
6. Then for the soft keys and hard keys to work, go to system/usr/keychars and system/usr/keylayout and replace with yours
7. Now go to system/etc. Then delete these items and replace with the ones meant for our device.
- vold.fstab
- /wifi
- /ppp
If u are porting cm7 from fit, use the boot.img of any cm7 rom here. eg. Mebitek's cm7 boot.img .
For ace,
Do the above things , then resize framework-res.apk, systemui.apk and other apk's like dialertabactivity.apk, phone.apk!
For other devices, (other manufacturers)
(Eg. HTC when porting cm7)
Extract the cm7 meant for our rom. Then delete app and framework folder. Then go to the rom u wanna port. Copy framework and app folder. And paste it in the cm7 made for our device.
For porting kernels,
unpack the boot.img of the rom u wanna port. Open init.rc and copy the things after bootpath.
repack ur ramdisk!
For camera to work on the ported roms, replace these wid urs,
libarccamera.so
libcamera.so
libcameraservice.so
libcamera_client.so
libCaMotion.so
liboemcamera.so
libseccamera.so
libseccameraadaptor.so
And plz dont spam the development section with ports
Use it for your personal use!
Enjoy Porting!
Sent from my GT-S5670 using xda premium
Good tutorial.. Well done
Inviato dal mio GT-S5570 usando Tapatalk
Gud guide for personal use...but now every noob will fill dev section with ports and least care about bug fixes...coz they don't know hw to do it. Lol
this is also an aspect ;-)
But we needf real Portes to FIX bugs. ..
And not some NOOB Porters to port a real buggy fw ...
DQiB said:
this is also an aspect ;-)
But we needf real Portes to FIX bugs. ..
And not some NOOB Porters to port a real buggy fw ...
Click to expand...
Click to collapse
Yeah most roms are noob friendly to port except the ones which are device specific..
yup like ldpi to ldpi
but mdpi to ldpi is in the most things really hard to port
and so on, i use my own method of porting roms ;-)
Most ports of me are mdpi to ldpi
and i know also how to fix bugs :´D
So for newbies stay out of dev sections with ports from devices you dont have
or dont know how to fix real bugs ,-)
DQiB said:
yup like ldpi to ldpi
but mdpi to ldpi is in the most things really hard to port
and so on, i use my own method of porting roms ;-)
Most ports of me are mdpi to ldpi
and i know also how to fix bugs :´D
So for newbies stay out of dev sections with ports from devices you dont have
or dont know how to fix real bugs ,-)
Click to expand...
Click to collapse
right
sir
still we are waiting for you
i know but please im busy for now ok?
Andi build from source CM7 for ur device in next week
DQiB said:
i know but please im busy for now ok?
Andi build from source CM7 for ur device in next week
Click to expand...
Click to collapse
thank you sir
cant wait for it...............good luck bro
I have ported the SGSII Rom from Galaxy Fit but I have changed the keylayout and keychair cartel but don't function the back button and the home and option button don't function correctly, this button function like the home button! What is the problem??
U changed d boot.img?
Sent from my HTC-Desire using xda premium
DQiB said:
yup like ldpi to ldpi
but mdpi to ldpi is in the most things really hard to port
and so on, i use my own method of porting roms ;-)
Most ports of me are mdpi to ldpi
and i know also how to fix bugs :´D
So for newbies stay out of dev sections with ports from devices you dont have
or dont know how to fix real bugs ,-)
Click to expand...
Click to collapse
Okay I will stay out of dev sections, so no more WP7 ROM for a long time.
KoperKiller said:
Okay I will stay out of dev sections, so no more WP7 ROM for a long time.
Click to expand...
Click to collapse
no need of staying out of dev section .. do give it a try .. remember every dev was a noob when he started making or porting rom ....
avilove4u said:
no need of staying out of dev section .. do give it a try .. remember every dev was a noob when he started making or porting rom ....
Click to expand...
Click to collapse
Correction:
Every developer was newb when starting, not a n00b.
n00b are those users that claim to have knowledge about a specific subject without really having a clue, causing confusion amongst regular members and making it difficult for developers to actually develop..
newb would be a user that knows his lack of knowledge, therefore making it easier to learn .....
Developers threads are for everyone, to develop and learn to develop. To cause obstruction of that "development" is what hurts our forums. So, in short
If you have something to contribute, please do it, and do it accordingly, trying to provide logs and specific issues in order for them to be approached.
If you have nothing to contribute, then....read.
If I want to port a honeycomb ROM to my tablet, would i use the STOCK files to replace the files in the honeycomb ROM? I need to know what ROM do I take my files to replace the honeycomb files with...
Feras.Rehman said:
Extract the cm7 meant for our rom. Then delete app and framework folder. Then go to the rom u wanna port. Copy framework and app folder. And paste it in the cm7 made for our device.
Click to expand...
Click to collapse
Would that work with any device or is it specific to Galalxy?
Like could I use a ROM of another device which has similar specs like my phone and use a cm7 for my phone and remove app and framework folder and then add the ones from another phone's stock ROM?
help please
i did all steps above to port a rom from Galaxy ace but in recovry mode when i try to flash the zip it says Installation aborted
plzz help
Bad guide. Where found better?
Sry for bad English.
Sent from SG Mini with Tapatalk 2
Jayydude_SGP said:
If I want to port a honeycomb ROM to my tablet, would i use the STOCK files to replace the files in the honeycomb ROM? I need to know what ROM do I take my files to replace the honeycomb files with...
Click to expand...
Click to collapse
dat would be really tricky! Im not a expert porter! ask someone else
IceCreamSandwich4.0 said:
Would that work with any device or is it specific to Galalxy?
Like could I use a ROM of another device which has similar specs like my phone and use a cm7 for my phone and remove app and framework folder and then add the ones from another phone's stock ROM?
Click to expand...
Click to collapse
it would work wid any device but it shd be arm v6.
MOUHISH said:
i did all steps above to port a rom from Galaxy ace but in recovry mode when i try to flash the zip it says Installation aborted
plzz help
Click to expand...
Click to collapse
replaced boot.img? Replace meta-inf folder and try.
NqX said:
Bad guide. Where found better?
Sry for bad english
Sent from SG Mini with Tapatalk 2
Click to expand...
Click to collapse
U can try to port roms from fit as a starter -_- try first then speak! No offense. Some people have tried my guide and it workd! :/ eg. Kartik.ansal has ported lewa os from wildfire using my guide :\
-Peace
Sent from my GT-S5670 using xda premium
Deleted Message

[REQ] Original lockscreen sounds

Hi there,
I would like to ask your help. I need the original lockscreen sounds of our ace. I use a cm based ROM now, and it doesn't contains those sounds.
Someone please upload the sounds! Thanks in advance!
Tapatalk II @ Samsung Galaxy Ace running Xperion v4
Get lock.ogg and unlock.ogg from a stock rom,find the lock and unlock sound files in CM,replace them with this,and give permissions if needed.I am not sure if it will work,but it wouldn't hurt to try I guess..
POTATO!!!!
kmarci said:
Hi there,
I would like to ask your help. I need the original lockscreen sounds of our ace. I use a cm based ROM now, and it doesn't contains those sounds.
Someone please upload the sounds! Thanks in advance!
Tapatalk II @ Samsung Galaxy Ace running Xperion v4
Click to expand...
Click to collapse
There u go mate

[Q]Theme JB for Galaxy Y working in mini??

Hey folks I was searching in the galaxy Y themes forums and i found this awesome theme that is exactly alike jb 4.2
I was wondering if this would work in our mini , in the comments the themer said that it won´t work on cm7 it only work on the stock bases custom roms for galaxy Y , So MAYBE it could work in a sotck base custom rom for our galaxy mini. Obviously i didnt try to flash it but maybe copying ONLY some apps (contacts and phone are great and enough for me ) to system/app it might work.
I tried but it didn´t work maybe i did something wrong or i didn´t gave the right permissions or maybe it only work it you flash it with the rom and not replacing the apk
I open this thread for any idea to make it work , not the complete theme, but some apps at least.(System ui and framework-res i dont think will work)
Here´s the link http://http://forum.xda-developers.com/showthread.php?t=2134382
Another ss
Dude,
Different systemui, framework, phone, mms, etc not even work on different roms of same phone
leave alone different devices
Eduardogv said:
Hey folks I was searching in the galaxy Y themes forums and i found this awesome theme that is exactly alike jb 4.2
I was wondering if this would work in our mini , in the comments the themer said that it won´t work on cm7 it only work on the stock bases custom roms for galaxy Y , So MAYBE it could work in a sotck base custom rom for our galaxy mini. Obviously i didnt try to flash it but maybe copying ONLY some apps (contacts and phone are great and enough for me ) to system/app it might work.
I tried but it didn´t work maybe i did something wrong or i didn´t gave the right permissions or maybe it only work it you flash it with the rom and not replacing the apk
I open this thread for any idea to make it work , not the complete theme, but some apps at least.(System ui and framework-res i dont think will work)
Here´s the link http://http://forum.xda-developers.com/showthread.php?t=2134382
Click to expand...
Click to collapse
can u pl pm me the mediafire link for the music apk in the screenshots. thanx a lot in advance. and it shiykd work on cm10.1 JB 4.2.2
Nabs Zains said:
Dude,
Different systemui, framework, phone, mms, etc not even work on different roms of same phone
leave alone different devices
Click to expand...
Click to collapse
actually it works my friends the phone, mms,calendar, contacts apk work on any custom stock based ROM. just dont flash push the apks to system and they will work.
I didnt try system ui and framework (i dont think they work)
Enviado desde mi GT-S5570 usando Tapatalk 2

[UI & Apps][CM10]Preview

theard going to removing
Nice very! Please where to download? is new samsung apps?:good:
wait a 2-3 days
i can't upload files now
but anyone can help me. if you know a very good task killer app, please pm me
the s-voice use more 40 Mb of RAM and we need to stop it automatically after use it
thanks
I never allowed using my ROM as a base. Either you remove this or I stop development.
You can provide it as a flashable .zip, not just re-upload my ROM.
ok. i don't upload your ROM. see i say wait 2-3 day for your let
but i can make a flasheble apps for your ROM & share it?
TheWhisp allowed to make it. but this is not a new ROM with his ROM base. it just a flashable .zip for CM10
You can't share paid apps, "Smart Keyboard Pro" is a paid application in Google Play.
thanks for it
i will use free version
If this is just customization of some thing than please put everything HERE so I can update first post. BTW you are sharing my work (flashable zip with TW5 launcher and widgets) without my permission so please remove this thread or you and this thread should be reported ASAP. Tnx
midzan21 said:
If this is just customization of some thing than please put everything HERE so I can update first post. BTW you are sharing my work (flashable zip with TW5 launcher and widgets) without my permission so please remove this thread or you and this thread should be reported ASAP. Tnx
Click to expand...
Click to collapse
AccuWeather whight is empty different theme or launcher? TouchWiz launcher are only!
TheWhisp said:
I never allowed using my ROM as a base. Either you remove this or I stop development.
You can provide it as a flashable .zip, not just re-upload my ROM.
Click to expand...
Click to collapse
black mailing is not the right way mate :/ ...modding rom's is not just a reupload of rom, of all ppl here, u have better understanding of how android works..u work with png's and make a lot of changes in xml/smali for extra mod's that arent merged in source by CM team..which is fun..but without modding and experimentation, there wont be any fun...just boring zombie dev's and users who arent allowed to work with compiled rom's..
look at mini forum..based on ur great work of cm9 and cm10, there wouldnt have been so many roms to choose from for users, without modding them...people will eventually get tired of using the same rom for over a period of time..
in the end, fun is all that matters in android since we can do anything with it...lighten up a bit, let them do wat ever they want...its not like they wont mention u in credits..telling people not to use ur work will only take the fun out of it...just sayin my thoughts sincerely..no offense meant
It's actually not blackmailing, but whatever... Taking others work and putting it into another's work (taking midzan's apps and adding them to my ROM) without doing any modding at all (at least I don't think adding/removing apps to a ROM is modding). + he asks for tutorial on how to do that. Either you contribute with some meaningful updates/patches/fixes etc. or you keep your Winzip ROM for a personal usage. I am not spending my free time so others can just re-upload my ROM. It's the same if someone takes your theme and changes, for example, the color of battery icon and re-uploads it.
hey hey hey
i port many apps
midzan only give me launcher & weather widget
many of this apps is my work
ok
say me how to delete theard & i will remove it
I didn't say you have to remove anything.. just make a flashable .zip. Or something else...
you say i use other work & put in rom
only TW5 & weather widget are for midzan
the midzan say in his theard this is not my work. i only share it
and i use it in this files
going to delete theard
say me how to delete it. i dont know
amir_n71 said:
hey hey hey
i port many apps
midzan only give me launcher & weather widget
many of this apps is my work
ok
say me how to delete theard & i will remove it
Click to expand...
Click to collapse
Report it to miderators and please post anything for TW5 look in appropriate thread (don't make 200 threads about single flashable zip). Tnx
Sent from my GT-S6500D using Tapatalk 2
i dont put only apps
i port it to cm10 mdpi
report it to miderators for deleting
amir_n71 said:
i dont put only apps
i port it to cm10 mdpi
report it to miderators for deleting
Click to expand...
Click to collapse
just make an update.zip that will :
-install the apps you ported (dont include launcher etc if midzan21 doesnt want)
-deletes the cm10 apps you deleted
just dont have it as a whole ROM
if you need help with the updater-script let me know

[Guide][Full]Port Galaxy Y ROMs To Galaxy Y Duos

Read Whole Procedure To Port Custom Rom Of Galaxy Y To Galaxy Y Duos.
What This Means - Open Your Duos Stock Deodexed ROM In One Window And In Another Window The ROM Of Galaxy Y You Want To Port.
Just Drag And And Drop Files From Galaxy Y Duos ROM To Galaxy Y ROM (You Port).
(If This Procedure Works With Other Devices Than Reply Must!!!).
Note : Every Changes With Stock Deodexed ROM. Few Changes Done with Stock Odex ROM.
Where To Make Changes. Change in These Folders/Files In System Which I Write.
1. App
2. Bin
3. Cameradata
4. Csc
5. Etc
6. Fonts
7.REMOVED
8. Lib
9. Media
10. Usr
11. Build.prop ,CSCFiles,CSCVersion,SW_Configuration.
12.Kernel
Now Enter These Folder To Make Changes...!!!
1. App < Change These Files With Stock Deodex ROM.
/system/app/Bluetoothopp.apk
/system/app/bluetoothPbap.apk
/system/app/BluetoothTestMode.apk
/system/app/BrcmBluetoothServices
/system/app/Camera.apk
/system/app/FmRadio.apk
2. Bin < Change These Files With Stock Deodex ROM.
/system/bin/BCM4330B1_002.001.003.0634.0652.hcd
/system/bin/bluetoothd
And Also Add This File
/system/bin/atxd (From Galaxy Y Duos Stock Deodex Rom To Galaxy Y ROM. You Port)
3.Cameradata < Change Whole Inside files with Stock Deodex ROM.
4.Csc < Change Whole Folder with Stock Deodex ROM.
5.Etc < Change Whole Folder with Stock Deodex ROM.
6.Fonts < Changes Whole Folder With Stock Deodex ROM.
7.Nothing Here Move To Next Step
8.Lib < Change These Files With Stock Deodex ROM.
/system/lib/liba2dp.so
/system/lib/libacc.so
/system/lib/libaccelcal.so
/system/lib/libaccsensorcal.so
/system/lib/libaccsensorcaltest.so
/system/lib/libacdapi_azi.so
/system/lib/libarccamera.so
/system/lib/libasound.so
/system/lib/libbluedroid.so
/system/lib/libbluetooth.so
/system/lib/libbluetoothd.so
/system/lib/libbrcm_ril.so
/system/lib/libbrcmjpeg.so
/system/lib/libcamera.so
/system/lib/libcamera_client.so
/system/lib/libcameraservice.so
/system/lib/libCaMotion.so
/system/lib/libsamsungSoundbooster.so
/system/lib/libscreencapture.so
/system/lib/libseccamera.so
/system/lib/libseccameraadaptor.so
/system/lib/libsensorservice.so
< Change Whole hw Folder With Stock Deodex ROM.
< Change Whole modules Folder With Stock Deodex ROM.
9.Media < Leave This Folder With Its Default Files.
10.usr < Make Changes In These Folder With Stock Deodex ROM.
< Change icu Folder With Stock Deodex ROM.
11.Replace These Files And Folder With Stock Deodex ROM.
/system/build.prop
/system/CSCFiles
/system/CSCVersion
/system/SW_Configuration
12.If Galaxy Y ROM Contain Boot.img (Kernel).
DO THIS
Delete Boot.img Present In Galaxy Y Rom
Download iduos1.3.1 Kernel
Unpack It Add Boot.img From Here To Galaxy Y Rom. That You Port To Galaxy Y Duos
-----------> You Done.
-----------> Repack The Zip
-----------> And Flash With The Same Procedure Which Comes With Galaxy Y ROM.
Credits - To Me Kartik [email protected]
Full detailed guide.Good Work.
Sent from my GT-S5360 using Tapatalk 2
@OP:-
i just tried porting minirom _ux (sgy rom ) but my cell got stuck on Samsung Galaxy Y duos screen....pls guide me about this problem.
Even i saw that in the main post i could see that FRAMEWORK is written as (removed) ....can u pls tell me what actually u meant ??
The above procedure works well..!!
and i port some galaxy y roms to galaxy y duos like
jellyblast
hyperion
nemsis
and other
remove framework, becoz theirs some difference b/w galaxy and duos framework
if you change ant framework files
your device cant boot up
good work i'll try but want ask how can i add language pack to the rom mean arabic and how to make arabic frameworkto shape browser and gmail
add arabic patch in csc folder. try it
what file should i patch for that processy
and one more question will it work with 2 sim or only 1 and if it only 1 is there any way to make it work with 2 sim
Hazem442 said:
what file should i patch for that processy
and one more question will it work with 2 sim or only 1 and if it only 1 is there any way to make it work with 2 sim
Click to expand...
Click to collapse
If you are porting a single sim rom than it only detect 1 sim only not 2nd sim and add csc file of arabic like INU , NPL and other
Upload Ur Ported Rom..
I Wanna Use It.Coz m Not able to Port Succesfully...Always Stucked at Logo
Himan Boro said:
Upload Ur Ported Rom..
I Wanna Use It.Coz m Not able to Port Succesfully...Always Stucked at Logo
Click to expand...
Click to collapse
if galaxy y rom developers gives permission than i upload. and how you stucks on bootloop :-\ :-\ :-\
@kartik verma
questions:
1)can i use DDLG1 rom from below link to port bcoz i am getting stuck on samsung galaxy y duos logo
(trying to port evox4)(the same thing was happening when few days back i tried to port using other porting methods )???
http://forum.xda-developers.com/showthread.php?t=1849192
(when i used hyperion for yduos instead of my stock deodexed from above link then the ported rom did got boot but there was no signal)
can some one provide the link for deodexed stock rom of YDUOS working for porting y roms to yduos(if thats the problem)
2)i am copying files/folders from yduos stock rom and pasting and replacing in evox4(sgy) rom and then at last creating zip of evox4 folder.Am i on right track??
3)Framework removed means we dont have to keep any framework folder OR we directly have to use yduos stock rom framework folder? OR directly use sgy rom framework folder???
(i am a newbie so plz help me out)
so actually ..
Should we delete framework if galaxy y rom and replace it with y duos framework or
should i keep galaxy y port rom framework only ??
here it is..
shankarsj said:
Should we delete framework if galaxy y rom and replace it with y duos framework or
should i keep galaxy y port rom framework only ??
Click to expand...
Click to collapse
1st of all u dont have to do nothing with framework folder leave it becoz galaxy y and duos framework files has some different. and dont take files from here and there .take this and this file to port rom or u got a bootloop i also use my own procedure and ported hyperion 8,jellyblast , nemsis and other but i didnt give u.
just follow the above link and dont do anything hurry.
Okay ..
kartik verma said:
1st of all u dont have to do nothing with framework folder leave it becoz galaxy y and duos framework files has some different. and dont take files from here and there .take this and this file to port rom or u got a bootloop i also use my own procedure and ported hyperion 8,jellyblast , nemsis and other but i didnt give u.
just follow the above link and dont do anything hurry.
Click to expand...
Click to collapse
But both sims will work or only one sim and how to make work both sims can u send a link of procedure or if u know just tell bro ..
shankarsj said:
But both sims will work or only one sim and how to make work both sims can u send a link of procedure or if u know just tell bro ..
Click to expand...
Click to collapse
only 1 sim work beciz u port a single sim rom or making single sim to dual sim not possible (if ur going to change than it takes more changes and editings)
kartik verma said:
only 1 sim work beciz u port a single sim rom or making single sim to dual sim not possible (if ur going to change than it takes more changes and editings)
Click to expand...
Click to collapse
okay bro ... if any problems il be back again
kartik verma said:
1st of all u dont have to do nothing with framework folder leave it becoz galaxy y and duos framework files has some different. and dont take files from here and there .take this and this file to port rom or u got a bootloop i also use my own procedure and ported hyperion 8,jellyblast , nemsis and other but i didnt give u.
just follow the above link and dont do anything hurry.
Click to expand...
Click to collapse
i am porting jellyblastv3 and i tried 3 times.
1st time with no framework folder -->>stuck at yduos logo
2nd time with jellyblast(sgy) framework files -->>booted but sim not working.NO SIGNAL.(HELP)
3rd time with stock deodexed (yduos) framework files -->>bootloop(tried wiping data cache..but no luck)
need help no signal
jaykasundra said:
i am porting jellyblastv3 and i tried 3 times.
1st time with no framework folder -->>stuck at yduos logo
2nd time with jellyblast(sgy) framework files -->>booted but sim not working.NO SIGNAL.(HELP)
3rd time with stock deodexed (yduos) framework files -->>bootloop(tried wiping data cache..but no luck)
need help no signal
Click to expand...
Click to collapse
in 7th step i write framework(removed) now edited . this means u dont have to do anything in framework folder .
I want hyperion for gt-s6102 but im to lazy to port

Categories

Resources