[Q] P1000 charge off when flashing rom - Galaxy Tab Q&A, Help & Troubleshooting

My charge was %6 when I flashing rom. Tab closed and not power on again. Battery indicator seem but not charging. I cant inside download mod or recovery mod too. Also pc dont see anything when I connect with usb. Is there any suggestion about it?

Suggest you keep charging for many hours.
Sent from my GT-I9300 using xda app-developers app

Moved. Please do not post questions in the General forums as per sticky

priyana said:
Suggest you keep charging for many hours.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I tried. Battery indicator seem but no changing on its status.

Now I can open downloading mode. But Odin dont see my tab. Pc see hardware but odin dont. If I try to open recovery mode. Tab stay in Galaxy Tab splash screen. Is there any suggestion?

Just keep trying in download mode, make sure fully charged. Open Odin first and files ready, then boot tab o download mode, sometimes it will see the tab, flash away.
You may also want to search for oneclick unbrick thread.
Sent from my GT-P1000 using xda app-developers app

priyana said:
Just keep trying in download mode, make sure fully charged. Open Odin first and files ready, then boot tab o download mode, sometimes it will see the tab, flash away.
You may also want to search for oneclick unbrick thread.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I tried Odin but dont see tab. Also Oneclick I used not worked too

Usually it will. Just keep trying.
If possible, get a fresh computer with xp 32 bit, install the USB driver that us in GB stock safe, and run odin that is in GB stock safe.
My preference s to run Linux with heimdall 1.3.1
Sent from my GT-P1000 using xda app-developers app

Related

[Q] Help Phone stuck at Galaxy s screen

Was going to flash new Rom and I think I cleared partian cache, also cleared dalvik cache went to reboot phone stuck at black Galaxy S screen I was running perception 10. I have a 1010 captivate was told I cant use regular odin with this model. Tried re-installing rom through recovery but says fail at line 14 and seredipty rom says fail at line 21. Please help
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Read and try this
Sent from my Captivate using XDA Premium App
Ok I tried this 3 times and odin keeps getting stuck on modem.bin any suggestions
Are you opening Odin prior to connecting phone?
Sent from my Captivate using XDA Premium App
yes am I supposed to
Yes. Just checking hmm
Sent from my Captivate using XDA Premium App
I dont have to add a modem where it says phone do I, How long should it stay at modem .bin
How long has it been there?
That should not take long
If stuck pull battery keep out for a couple then retry. Also I believe ig you right click Odin you can run as administrator try thay
Sent from my Captivate using XDA Premium App
I read that but theres no option to run as admin, tried it again and this time said cannot open serial port, Ill try again
Try different ports on pc
Sent from my Captivate using XDA Premium App
Long shot but read this
not found any responses. Here is my situation:
*My computer recognizes the phone *ODIN recognizes the phone *the phone is in download mode *ODIN gets stuck *I have tried multiple times, but it continuously gets stuck at DO NOT TURN OFF TARGET!! *The max I have waited is around 30ish minutes *3 button combo works on my phone *I have tried non-one click ODIN to JH2 and it freezes on modem.bin
I have used ODIN before, and I have no idea why this is not working. If anyone could help me it would be greatly appreciated.
PROBLEM SOLVED: Antivirus software screwed with ODIN" __________________ How to videos For the Samsung Captivate b
Sent from my Captivate using XDA Premium App
I disabled firewall and anti virus still freezes at modem.bin damn
Did the software do come with a modem.bin
Sent from my Captivate using XDA Premium App
not sure how do u check I just followed link step by step
When you extracted the rar. File to get the tar to put in PDA. Was there. A modem
Sent from my Captivate using XDA Premium App
ya theres a modem file
Try rebooting your computer. Then try again if same issue then
Also maybe redownload the rom software in case of corruption
I am not sure of this but at this point might as well throw that in.
Sent from my Captivate using XDA Premium App
Ok borrowed sisters Laptop downloaded all files and did process over and worked like a charm first time, must have been problem with my desktop wow, my question now is do I have to update to JH7 to root and flash serendipity or can I do it from the current JH2.Mcord thanks for you help I really appreciate it
If you have the update.zip on your SD for clockwork recovery I believe you should be able to get into recovery reinstall packages twice then install zip from SD choose serindipity and flash away
If you dont have it let me know I will post a do link
Happy things are up and running for you
Sent from my Captivate using XDA Premium App
thanks I have it on there Ill try it thanks again

[Q] While flashing stock via odin screen gets blue/purple

Hey there,
Got my moms Galaxy over here. Thing wasn't updated and slow as hell so I thought I'd update it. Went through the Kies process but that didn't really work, phone just couldn't make connection despite what ever driver I used (win or mac, got both here).
So first things went haywire when I read somewhere to flash recovery I needed to do something via Heimdall. Did that with the command window and afterwards the phone got stuck in a bootloop (only the I9000+samsung repeating over and over again).
Then I tried flashing GB from samfirmware, which failed. All done through odin, the screen went purple at dbdata.rfs. So I went with stock froyo, from the androidworld.nl forums and same thing happens but now it's a blue screen at factoryfs.rfs.
What am I doing wrong?
Try flashing again via Odin and this time don't touch your pc while it is flashing. That yellow purple screen has happened to me while I was doing other things while flashing was going on in the background.
And check if your phone is i9000 or i9000+ and flash the their respective firmware .
Sent from my GT-I9000 using XDA App
gcuchiha said:
Try flashing again via Odin and this time don't touch your pc while it is flashing. That yellow purple screen has happened to me while I was doing other things while flashing was going on in the background.
And check if your phone is i9000 or i9000+ and flash the their respective firmware .
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Same thing, didn't do anything and screen went gray. This is so random for me, as flashing is SO easy with my own Desire but this thing is on a whole different level.
Try changing your Odin version to 1.82 and try again.
Sent from my GT-I9000 using XDA App
Or 1.3 idk try both.
Sent from my GT-I9000 using XDA App
gcuchiha said:
Try changing your Odin version to 1.82 and try again.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
gcuchiha said:
Or 1.3 idk try both.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Actually did both already! The 1.3 was from the 2.2 pack from the Dutch forum. Got 1.82 from the samfirmware website. No luck yet
1.82 shows a bootloader function, do I need to have one of those files with it?
No don't flash bootloader
Sent from my GT-I9000 using XDA App
gcuchiha said:
No don't flash bootloader
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I was about to try this actually! http://forum.xda-developers.com/showthread.php?t=1196179
Since the screwup started with Heimdall, might fix it with that?
Watch a YouTube video and see if you're doing everything properly.
What I do is
1. Go to download mode
2. Open Odin, select pit, PDA, phone, CSC files. And remember to check the re partition option
3. Connect your phone
4. Click start.
Sent from my GT-I9000 using XDA App
Maybe. I never used heimdall. Maybe you could try that.
Sent from my GT-I9000 using XDA App
gcuchiha said:
Watch a YouTube video and see if you're doing everything properly.
What I do is
1. Go to download mode
2. Open Odin, select pit, PDA, phone, CSC files. And remember to check the re partition option
3. Connect your phone
4. Click start.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Doing all that yeah, exactly in that order.
Hmmm. Then I guess heimdall is your only hope ,since it started the problem.
Sent from my GT-I9000 using XDA App
Hmm, in Heimdall it gets all the way up to MODEM @ 59%. Then it fails and crashes..
weird
[edit] buuuuuuuut I got android recovery back! okay now we have progress!
and now by adding the packaged zImage from CM have CM.. progress again!
Are you using the original USB cable?. Same thing happened to me with a cheap ebay cable...
cabessius said:
Are you using the original USB cable?. Same thing happened to me with a cheap ebay cable...
Click to expand...
Click to collapse
Hm, no. It's a replacement cable (cheap) which I used for my Desire, no problem with that at all. Though it might be it indeed! Will be two days before I can get the original cable.
In the meanwhile I got CWM-based Recovery v.5.0.2.6 working.. while installing cyanogenmod it goes "checking blm status", then "install from sd complete".. a bit strange and it doesn't boot into the rom but into the recovery.
Lipinsky said:
Hm, no. It's a replacement cable (cheap) which I used for my Desire, no problem with that at all. Though it might be it indeed! Will be two days before I can get the original cable.
In the meanwhile I got CWM-based Recovery v.5.0.2.6 working.. while installing cyanogenmod it goes "checking blm status", then "install from sd complete".. a bit strange and it doesn't boot into the rom but into the recovery.
Click to expand...
Click to collapse
Switching back to the original cable fixed the problem for me. Hope it does for you as well, try that and tell us what happened!.
Can I still use Odin then, now with CWM recovery?
You can use Mobile Odin by Chainfire (look for it in the market), it works exactly as an Odin built-in your SGS with no need for PC.
cabessius said:
You can use Mobile Odin by Chainfire (look for it in the market), it works exactly as an Odin built-in your SGS with no need for PC.
Click to expand...
Click to collapse
Uhm, well I can't get really into any market as no rom will boot at this moment..
Guys, thanks for the cable advice! Could get my hands on a SE cable and flashed 2.3.5 stock through Odin. Happy that I didn't wreck my moms phone :')

[Q] Help: Flashed the bootloader of my Samsung Galaxy Tab P1000 with the wrong binary

I have a Samsung Galaxy Tab GT-P1000. Using Odin3 v3.04 I (accidently) flashed the Bootloader with the wrong binary. With the Auto-Reboot option selected on the Odin3, the device turned off and is not turning on again.
Before flashing, my Tab had the official Samsung GB 2.3.3 (P1000JPJPC if I am not mistaken).
Some threads suggest that I charge the Tab using the wall charger for 4 hours, and see if the battery icon appears on the screen or not, then connect the tab to the PC. I did that. I connected the Tab to the wall charger overnight. Nothing appeared on the screen. Then the next morning I connected the Tab to the PC, nothing happened. The PC does not recognize that there is anything connected on its USB port.
The Tab is not turning on. I've tried to press (and long press) almost every combination of the Tab's keys I could think of, but the Tab just won't turn on.
I guess I hardbricked my device (as explained in this thread)
I don't think I'll be able to apply the Unbrickable process explained here.
Having said that, my question is: Is there anything else I can do at home to revive my Tab, or do I need to send it to Samsung repair center?
-Adel
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
You can also send it to mobiletechvideos.com.
priyana said:
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
komplotter said:
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
Click to expand...
Click to collapse
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi Priyana,
Thanks for your reply. Yes, as far I could tell from reading up on it, I would guess mine is not bricked.
I can boot to download mode and to recovery - cwm (v3.0.0.5). I have tried downloading Overcome and anything else I thought might work but this is where I get stuck. I've wiped the cache and other things like that described on the net and on videos (actually this is what got me into this in the first place). When I copy a .zip file onto the external sd card and put it in the tab, I can't install the zip from the sd card because it can't find the directory I made. I'll have a look in your signature and see what I can find there but any guidance would be much appreciated.
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
priyana said:
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I managed to get CWM 5.5.0.4 and get ICS installed in my tab by using two files (CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS and P1000XXJQ1_P1000XXJQ1_P1000XXJPZ). I would still like to use Overcome and I have had a brief look at the installation guide. I'll have a more thorough look and then give it a shot. I see that there is a version 4.1.0. Would I use that in that same way as the 4.0.0 ROM, because the Overcome7_ROMv4_Wipe file won't extract (there seems to be a problem with it and I've downloaded it twice).
You don't need the overcome ROM.
Just GB stock safe and overcome kernel.
Sent from my GT-P1000 using xda app-developers app

I killed my phone

So
I was using saurom v2.. everything was good when i decided to try ics.. i tried to instal tiramislim v2.. got problems rom never installed.
i downgraded back to gb jw4... rooted.. then tried the f4k ics rom...
failed to install it and now i can't even downgrade.. everytime i try my phone just stucks on odin or fails..
any idea?
sorry if its the wrong section, but i need help
Can u get into download mode?
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
Can u get into download mode?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
i managed to make it jvu.. then went to make it jw4
now i can't even enter download mode.. screen stopped working or wtf..
Take out the battery for 1min.
Try removing the battery and then try the 3 button combo to enter download mode. I thing Odin failed because when you tried to install F4 it changed partitions and when you wanted to downgrade to jw4 you did not repartition with 512 pit.
When you enter download mode remember to install the 3 file stock rom with 512 pit and repartition checked.
After installing the stock rom before proceeding with jellybean remember to backup your efs folder ( you can search xda dev how to do that)
I strongly recommend going with Cyanogenmod 10 stable. Its very fast and with the latest semaphore kernel runs like a beast.
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
Try removing the battery and then try the 3 button combo to enter download mode. I thing Odin failed because when you tried to install F4 it changed partitions and when you wanted to downgrade to jw4 you did not repartition with 512 pit.
When you enter download mode remember to install the 3 file stock rom with 512 pit and repartition checked.
After installing the stock rom before proceeding with jellybean remember to backup your efs folder ( you can search xda dev how to do that)
I strongly recommend going with Cyanogenmod 10 stable. Its very fast and with the latest semaphore kernel runs like a beast.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
after i made it jvu i wanted to make it jw4.. it was doing something else.. i forgot the names now.. and then the screen just went off
removed the battery many times but nothing. i am charging the phone in case it's the battery :/ i closed also odin when i saw it was doing nothing..
i think i did a serious damage on the phone. If it gets fixed i will try cm10.. right now.. nothing :/
I think Odin crashed my phone
because i changed 3-4 custom roms in some hours..
i saw some threads about how to put it back in recovery mode but nothing..
screen is black.. not responding at all : (
I think your battery died in the middle of the flashing process. When you charge the battery does it show the battery indicator charging ?
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
I think your battery died in the middle of the flashing process. When you charge the battery does it show the battery indicator charging ?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
nothing at all..
Then basically your battery died in the middle of flashing process, you can try with another full battery and try to enter download mode by using the 3 button combo. If it does not it means you have to use a USB jig to access download mode. Once you access download mode remember to have a fully charged battery before flashing
Sent from my GT-I9000 using xda app-developers app
pirati81 said:
Then basically your battery died in the middle of flashing process, you can try with another full battery and try to enter download mode by using the 3 button combo. If it does not it means you have to use a USB jig to access download mode. Once you access download mode remember to have a fully charged battery before flashing
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
so when the battery dies in the middle of flashing... i can't charge it?
Possibly not, you have to try with a fully charged battery before flashing anyway. I think if you touch the phone while on power and the battery is warm maybe is charging. If there is no sign of life or there is no heat at all maybe is not charging. You still have to try to enter download mode with a fully charged battery, keep trying.
Sent from my GT-I9000 using xda app-developers app
Any news? Luck?
Sent from my GT-I9000 using xda premium
i changed battery with external charger and tried putting it in download mode..
nothing though : /
i don't know what to do
You have to try the dowload mode using an USB jig.
http://forum.xda-developers.com/showthread.php?t=819551
You can't broke this mode by flashing your phone, if an USB Jig don't work, you really have an hardware problem.
my pc makes sounds when i connect the phone.. then the sound that it got dc'ed
i don't think i will find a jig here.. nor i can make one.
i will give it to samsung service center and pay them..
if it gets fixed
1 week and more without a phone lol
Where you're from..? If you're from holland i have a jig for you... if not you can order one from the internet i paid €3,75 for it
GT-I9001 4.1.2 JB by Invendor
same happened to me
i live in India i have the same problem tried repairing my phone but no result.....i gave it to a repairer he tried the riff box repair but nothing happened....and when i am charging the phone it doesn't heats.... if you get something done please update it on this thread, while i'm trying too
i guess i have to find a shop and buy a jig : P
you can order the jig on ebay... i got one for my phone... in continuation of the discussion going on, my phone is bricked as well... nothing is working... neither the 3 combo button or the JIG... also, when i plugin the charger, no indication is showing up... can anyone please suggest what can be done for this?
I checked with Samsung.. they have asked me to get the motherboard replaced and it will cost around 8K...

[Q] Galaxy Tab 8.9 LTE P7320 brick during root - HOWTO recover ?

Dear all,
I need your advise / help.
Friend of my asking me for help to recovery his Galaxy Tab 8.9 LTE, he tell me that, during his root process, he brick his Tab 8.9. Now the tab is showing Black all time. I taken a look, and connected to Data USB cable, connect it to PC.
This WIN7 OS direct the tab and install USB driver. When I push on/off button, the tab seems reboot itself into loop. But the screen not showning anything at all.
I put it into Samsung charger ( not USB to PC). But it does not shown the Big icon of battery. But I know it is live. As the PC response with installing USB driver. But the USB drive was pickup wrongly, as some kind of USB reader. NOT the Tab 8.9.
What is the best way to recovery this tab 8.9 to factory ROM ? I did downloaded lastest P7320ZHLP8_P7320ZZHLP8_P7320ZHLP2_CL1174893_user_l ow_HOME.tar from sammobile.com and have ODIN 1.85 ready. I just need to find a way to get this tab into download MODE.
Can you help and advise.
many thanks
James
If Odin recognizes the device flash the stock tar. The yellow com port will show up in Odin if it recognizes it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Yes, I did tried ODIN, but it does not flag up yellow com port, as it needs to be in download mode in order for ODIN to connect the tab.
It sounds like you're hard bricked. If it's still in warranty Samsung should fix it. If its not look for a jtag service for the tab.
Sent from my SGH-I727 using xda app-developers app
i see. May I know what is "jtag service for the tab" ?
thanks
Google it. It's the only way to repair a hard brick.
Sent from my SGH-I727 using xda app-developers app
hard brick ?
but it is live. able to connect pc usb with response. so just software issues right ?
Sent from my GT-N7100
That's typical of a hard brick. It's not completely dead but the only way you'll get any firmware on it is jtag.
Sent from my SGH-I727 using xda app-developers app
thanks for clarify , it is out of warranty, will advise my friend by it back to samsung repair.
Sent from my GT-N7100
by the way, the tab still up running on battery, my guess if it I let it discharge itself, until battery flat, so it acturally shutdown.
Then charge it again, will it able to get into download mode ?
cheers
James
Sent from my GT-N7100
I would try it but I don't think so. I had a tab that bricked and all I could do was have Samsung repair it. It was still under warranty.
Sent from my SGH-I727 using xda app-developers app
RIFF JTAG box can help ?
Finally got jtag service done. Now the back online.
But it was being installed with wcm recovery, how can I restore it back to factory rom ?
Thanks
James
keijames said:
by the way, the tab still up running on battery, my guess if it I let it discharge itself, until battery flat, so it acturally shutdown.
Click to expand...
Click to collapse
keijames said:
Finally got jtag service done. Now the back online.
But it was being installed with wcm recovery, how can I restore it back to factory rom ?
Thanks
James
Click to expand...
Click to collapse
Use Odin to flash the stock rom. You can get the rom at sammobile.com. you'll have to sign up but it's free. You can extract the tar.md5 file out of the zip file using 7-zip. Flash the md5 file.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Use Odin to flash the stock rom. You can get the rom at sammobile.com. you'll have to sign up but it's free. You can extract the tar.md5 file out of the zip file using 7-zip. Flash the md5 file.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
yeph, it works smooth......
Sent from my GT-P7320 using xda app-developers app

Categories

Resources