Was going to flash new Rom and I think I cleared partian cache, also cleared dalvik cache went to reboot phone stuck at black Galaxy S screen I was running perception 10. I have a 1010 captivate was told I cant use regular odin with this model. Tried re-installing rom through recovery but says fail at line 14 and seredipty rom says fail at line 21. Please help
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Read and try this
Sent from my Captivate using XDA Premium App
Ok I tried this 3 times and odin keeps getting stuck on modem.bin any suggestions
Are you opening Odin prior to connecting phone?
Sent from my Captivate using XDA Premium App
yes am I supposed to
Yes. Just checking hmm
Sent from my Captivate using XDA Premium App
I dont have to add a modem where it says phone do I, How long should it stay at modem .bin
How long has it been there?
That should not take long
If stuck pull battery keep out for a couple then retry. Also I believe ig you right click Odin you can run as administrator try thay
Sent from my Captivate using XDA Premium App
I read that but theres no option to run as admin, tried it again and this time said cannot open serial port, Ill try again
Try different ports on pc
Sent from my Captivate using XDA Premium App
Long shot but read this
not found any responses. Here is my situation:
*My computer recognizes the phone *ODIN recognizes the phone *the phone is in download mode *ODIN gets stuck *I have tried multiple times, but it continuously gets stuck at DO NOT TURN OFF TARGET!! *The max I have waited is around 30ish minutes *3 button combo works on my phone *I have tried non-one click ODIN to JH2 and it freezes on modem.bin
I have used ODIN before, and I have no idea why this is not working. If anyone could help me it would be greatly appreciated.
PROBLEM SOLVED: Antivirus software screwed with ODIN" __________________ How to videos For the Samsung Captivate b
Sent from my Captivate using XDA Premium App
I disabled firewall and anti virus still freezes at modem.bin damn
Did the software do come with a modem.bin
Sent from my Captivate using XDA Premium App
not sure how do u check I just followed link step by step
When you extracted the rar. File to get the tar to put in PDA. Was there. A modem
Sent from my Captivate using XDA Premium App
ya theres a modem file
Try rebooting your computer. Then try again if same issue then
Also maybe redownload the rom software in case of corruption
I am not sure of this but at this point might as well throw that in.
Sent from my Captivate using XDA Premium App
Ok borrowed sisters Laptop downloaded all files and did process over and worked like a charm first time, must have been problem with my desktop wow, my question now is do I have to update to JH7 to root and flash serendipity or can I do it from the current JH2.Mcord thanks for you help I really appreciate it
If you have the update.zip on your SD for clockwork recovery I believe you should be able to get into recovery reinstall packages twice then install zip from SD choose serindipity and flash away
If you dont have it let me know I will post a do link
Happy things are up and running for you
Sent from my Captivate using XDA Premium App
thanks I have it on there Ill try it thanks again
Related
I turned my phone off like normal last night. The phone is rooted with 2.2. I have anti virus etc on it to make sure i dont do anything nasty to it. I went to turn it on this morning and it got into a loop when it got into the main screen it got to a loop where it loads up all services and then vibrates and retries to start all services.
I shut it off and have rebooted it and same thing continues to happen. I cannot get into the apps screen to reset the phone and when I try to reinstall the root pkgs in the recovery screen i Get a red message saying cannot find update.zip or whatever the extension name is. I am not sure what to do here. I Keep pulling the battery out and resetting it but same thing is happening its booting up but keeps looping in the main screen.
1.not a dev subject.
2.let us know what rom. What you have installed latley and what kernel. Ect...
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
This is worng place 4 this post
Take batt out hold vol up and down key put batt in plug in usb if it goes into download mode use odin 1click flash to stock
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry not trying to post out of order, but i just want my phone back and working properly
Its in Download mode, trying to get it to recognize the phone. and Reflash back to stock. The reflash wont recognize the phone. All drivers are installed for Windows 7 64 Bit.
Try to plug into a diff usb connection.try reboot.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Make sure you open odin first before plugging in your usb.
Sent from my GT-I9000 using XDA Premium App
Just to this this thread and read the directions, should help in getting back to stock.
http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+click
Thank You for your help all...
Thank You
Ok i am back to stock and have rerooted and will install my custom rom again and start back from ground zero!! Thanks for all your help! !I am going to now back my phone up when its all done so this doesnt happen again!
Title this thread closed / delete. Glad u figured it out
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
you must have installed the wrong modem or kernel.
Hey there,
Got my moms Galaxy over here. Thing wasn't updated and slow as hell so I thought I'd update it. Went through the Kies process but that didn't really work, phone just couldn't make connection despite what ever driver I used (win or mac, got both here).
So first things went haywire when I read somewhere to flash recovery I needed to do something via Heimdall. Did that with the command window and afterwards the phone got stuck in a bootloop (only the I9000+samsung repeating over and over again).
Then I tried flashing GB from samfirmware, which failed. All done through odin, the screen went purple at dbdata.rfs. So I went with stock froyo, from the androidworld.nl forums and same thing happens but now it's a blue screen at factoryfs.rfs.
What am I doing wrong?
Try flashing again via Odin and this time don't touch your pc while it is flashing. That yellow purple screen has happened to me while I was doing other things while flashing was going on in the background.
And check if your phone is i9000 or i9000+ and flash the their respective firmware .
Sent from my GT-I9000 using XDA App
gcuchiha said:
Try flashing again via Odin and this time don't touch your pc while it is flashing. That yellow purple screen has happened to me while I was doing other things while flashing was going on in the background.
And check if your phone is i9000 or i9000+ and flash the their respective firmware .
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Same thing, didn't do anything and screen went gray. This is so random for me, as flashing is SO easy with my own Desire but this thing is on a whole different level.
Try changing your Odin version to 1.82 and try again.
Sent from my GT-I9000 using XDA App
Or 1.3 idk try both.
Sent from my GT-I9000 using XDA App
gcuchiha said:
Try changing your Odin version to 1.82 and try again.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
gcuchiha said:
Or 1.3 idk try both.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Actually did both already! The 1.3 was from the 2.2 pack from the Dutch forum. Got 1.82 from the samfirmware website. No luck yet
1.82 shows a bootloader function, do I need to have one of those files with it?
No don't flash bootloader
Sent from my GT-I9000 using XDA App
gcuchiha said:
No don't flash bootloader
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I was about to try this actually! http://forum.xda-developers.com/showthread.php?t=1196179
Since the screwup started with Heimdall, might fix it with that?
Watch a YouTube video and see if you're doing everything properly.
What I do is
1. Go to download mode
2. Open Odin, select pit, PDA, phone, CSC files. And remember to check the re partition option
3. Connect your phone
4. Click start.
Sent from my GT-I9000 using XDA App
Maybe. I never used heimdall. Maybe you could try that.
Sent from my GT-I9000 using XDA App
gcuchiha said:
Watch a YouTube video and see if you're doing everything properly.
What I do is
1. Go to download mode
2. Open Odin, select pit, PDA, phone, CSC files. And remember to check the re partition option
3. Connect your phone
4. Click start.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Doing all that yeah, exactly in that order.
Hmmm. Then I guess heimdall is your only hope ,since it started the problem.
Sent from my GT-I9000 using XDA App
Hmm, in Heimdall it gets all the way up to MODEM @ 59%. Then it fails and crashes..
weird
[edit] buuuuuuuut I got android recovery back! okay now we have progress!
and now by adding the packaged zImage from CM have CM.. progress again!
Are you using the original USB cable?. Same thing happened to me with a cheap ebay cable...
cabessius said:
Are you using the original USB cable?. Same thing happened to me with a cheap ebay cable...
Click to expand...
Click to collapse
Hm, no. It's a replacement cable (cheap) which I used for my Desire, no problem with that at all. Though it might be it indeed! Will be two days before I can get the original cable.
In the meanwhile I got CWM-based Recovery v.5.0.2.6 working.. while installing cyanogenmod it goes "checking blm status", then "install from sd complete".. a bit strange and it doesn't boot into the rom but into the recovery.
Lipinsky said:
Hm, no. It's a replacement cable (cheap) which I used for my Desire, no problem with that at all. Though it might be it indeed! Will be two days before I can get the original cable.
In the meanwhile I got CWM-based Recovery v.5.0.2.6 working.. while installing cyanogenmod it goes "checking blm status", then "install from sd complete".. a bit strange and it doesn't boot into the rom but into the recovery.
Click to expand...
Click to collapse
Switching back to the original cable fixed the problem for me. Hope it does for you as well, try that and tell us what happened!.
Can I still use Odin then, now with CWM recovery?
You can use Mobile Odin by Chainfire (look for it in the market), it works exactly as an Odin built-in your SGS with no need for PC.
cabessius said:
You can use Mobile Odin by Chainfire (look for it in the market), it works exactly as an Odin built-in your SGS with no need for PC.
Click to expand...
Click to collapse
Uhm, well I can't get really into any market as no rom will boot at this moment..
Guys, thanks for the cable advice! Could get my hands on a SE cable and flashed 2.3.5 stock through Odin. Happy that I didn't wreck my moms phone :')
Bricked + Stcuk at download screen
Hello guys,
So i created a really messy situation for me. I flashed a lot of ics rom's and was not happy with any of them so was trying to odin back to gb stock rom and flash my old gb custom rom but the odin on pc got stuck at "Getting pit details " and phone was at 1/10 the progress bar..it stuck there for abt 10mins and i decided it's not going anywhere and stuck so i pulled the cable and the phone was hard-bricked. it was not responding to anything. Surprisingly enough in morning i was able to get into download mode but now when i try to flash from odin it get's stuck at "Setup connection" and just stays there. Any Ideas ?
Edit: The phone gets detected in windows and drivers get installed but adb says unknown. or device not found for any commands that i try
Edit #2 :Flashed a Md5 i had and the phone booted into recovery giving all sorts of error E:/data not found and sorts. Not sure what i can do ahead. The odin all in one package get stuck at Setting pit file
See this... Captivate Connection Issues...
And u may need to try a Heimdall One Click if the Odin doesn't work after seeing the thread above.
See here for Odin or Heimdall One Clicks... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
See this... Captivate Connection Issues...
And u may need to try a Heimdall One Click if the Odin doesn't work after seeing the thread above.
See here for Odin or Heimdall One Clicks... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Bud thanxx for the reply i just fixed it
had an old package of I9000 lying in the comp...used the pda first to fix the filesystem then used all pit,phone,pda, the last package and the phone took it...now i am back to my custom gb f/w yeah i was considering Heimdall but playing around somewhat with odin worked
Good deal.
Some Captivates do not like the One Clicks, but will accept the flashing of the Firmware through the regular Odin.
Sent from my SAMSUNG-SGH-I777 using xda premium
My charge was %6 when I flashing rom. Tab closed and not power on again. Battery indicator seem but not charging. I cant inside download mod or recovery mod too. Also pc dont see anything when I connect with usb. Is there any suggestion about it?
Suggest you keep charging for many hours.
Sent from my GT-I9300 using xda app-developers app
Moved. Please do not post questions in the General forums as per sticky
priyana said:
Suggest you keep charging for many hours.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I tried. Battery indicator seem but no changing on its status.
Now I can open downloading mode. But Odin dont see my tab. Pc see hardware but odin dont. If I try to open recovery mode. Tab stay in Galaxy Tab splash screen. Is there any suggestion?
Just keep trying in download mode, make sure fully charged. Open Odin first and files ready, then boot tab o download mode, sometimes it will see the tab, flash away.
You may also want to search for oneclick unbrick thread.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Just keep trying in download mode, make sure fully charged. Open Odin first and files ready, then boot tab o download mode, sometimes it will see the tab, flash away.
You may also want to search for oneclick unbrick thread.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I tried Odin but dont see tab. Also Oneclick I used not worked too
Usually it will. Just keep trying.
If possible, get a fresh computer with xp 32 bit, install the USB driver that us in GB stock safe, and run odin that is in GB stock safe.
My preference s to run Linux with heimdall 1.3.1
Sent from my GT-P1000 using xda app-developers app
[Solved!]
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
http://forum.xda-developers.com/showthread.php?t=731989
Follow this guide after putting your phone into download mode.
Sent from my SGH-I897 using Tapatalk 2
chdiryoung said:
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
Click to expand...
Click to collapse
See this Captivate - PC Connection Issues, Download Mode and Recovery Mode Help thread on more info on how to get the phone to boot into Recovery...http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks, I tried getting into recovery mode using the guide on that thread but no luck. I haven't gotten to try the first guide suggested yet so when I have time I'll try that. Thankfully I can get into download mode fine.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks so much, I'm gonna try that on Monday first chance I get!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
4-2ndtwin said:
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
How long should/could it take Odin to detect/recognize my captivate? I couldn't wait to try the KK4 flash, but I've waited for about 10 minutes and it's not showing anything in Odin.:\
It should only take a few seconds.
See that Captivate - PC Connection Issues...thread i linked u to in my reply a few posts up.
Sent from my SAMSUNG-SGH-I747 using xda premium
Well I've been up all night lol but I got everything to work!! I guess it all just clicked with me and I understood and found all the answers in threads. THANK YOU SO MUCH!! Your link and Odin one click worked perfect. I think I had a problem with the drivers, that's why it wouldn't detect it. I read in another thread it could be that and I tried reinstalling the Samsung drivers but no luck. So I just switched to my windows xp where I'd never used heimdall drivers(I was on my windows 7) and did it on there, worked perfectly! I then went on to reinstall cwm and then cm 10.1.2 and I love it! Now I'm waiting for the Google play store .zip to download so I can flash it onto my i897! THANKS AGAIN!!! :thumbup:
Sent from my SAMSUNG-SGH-I317 using xda app-developers app