Related
Just wondering how I can check which bootloader I have? as in the froyo or gingerbread one? Iflashed JVK and then tried to flash old bootloader but I'm not sure if it worked.......
When you reboot to recovery mode isnt the bootloader version shown there? like by default 2e or something like that?
cant remember exctaly but think that's it? Personally I have clockwork mod installed and would highly recommend it.
You can try if on windows :
adb bugreport | find "bootloader"
or if on linux :
adb bugreport | grep bootloader
Bootloader info?
+1 to that question: can't run adb on windows connected to phone and adb on phone terminal doesn't work. Can't find info on bootloader on default CW recovery.
Phone info shows Baseband version I9000XXJVK - but I don't know its connected anyhow?
There is no simple way to tell which bootloaders you have installed, there is no code to display it, no settings menu that will give you a clue. To be honest, 99,999 times out of 100,000 there is absolutely no need for you to know if you have Froyo of Gingerbread bootloaders.
However if you really want to know, and know your way around .bin files and hexadecimal editors, you can try the methods advised in this post: http://forum.xda-developers.com/showpost.php?p=16319901&postcount=13308
Daneshm90 said:
You can try if on windows :
adb bugreport | find "bootloader"
or if on linux :
adb bugreport | grep bootloader
Click to expand...
Click to collapse
I did it and, in my case (sgs i9000 cm7.1) says:
[ro.bootloader]: [unknown]
is it bad?
*#1234#
madigan94 said:
Just wondering how I can check which bootloader I have? as in the froyo or gingerbread one? Iflashed JVK and then tried to flash old bootloader but I'm not sure if it worked.......
Click to expand...
Click to collapse
Dis you try going to dialer and pressing *#1234# ?
What was the last stock version you had? GB?
Sent from my GT-I8190 using Tapatalk
rb1725 said:
Dis you try going to dialer and pressing *#1234# ?
Click to expand...
Click to collapse
LOL look at the date of the post you've answered.... 3 years old.
tetakpatalked from Nexus 7 flo
tetakpatak said:
LOL look at the date of the post you've answered.... 3 years old.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Lol, here I am 3 years after you, trying to find my bootloader version
just_another_guy said:
Lol, here I am 3 years after you, trying to find my bootloader version
Click to expand...
Click to collapse
and me also but for i9305
7 years later, here is the answer:
The current bootloader version can be checked by running the command getprop ro.bootloader in a terminal app or an adb shell from a command prompt (on Windows) or terminal (on Linux or macOS) window.
just_another_guy said:
Lol, here I am 3 years after you, trying to find my bootloader version
Click to expand...
Click to collapse
MystaMagoo said:
and me also but for i9305
Click to expand...
Click to collapse
Easiest solution: use the app Kernel Adiutor, you’ll find the info on the “Device” tab.
8 years later, here is the simple answer:
Use cpuz for android under "system" tab!
https://play.google.com/store/apps/details?id=com.cpuid.cpu_z&hl=en
This is not my work, all work done by kent.
Thanks kent.
Currently we have the Retail.eu fastboot files, more coming soon, till then happy unbricking
Download Ics fastboot files:
81.5.31006.XT890.Retail.en.EU
MD5: aa587a372ab28faef616c7ebc6c4ac53
For Brazil Visit here:
http://sbf.droid-developers.org/smi/list.php
Credits
Skrilax_CZ
Edit: Visit here to see all the available fastboot files
Warning: If your phone is not a Retail.EU model and has NOT been bootloader unlocked please do not try these.
I am unlocked and started with Retail.GB. I can flash system, boot, recovery fine. I would not suggest flashing the other parts or the whole file in RSD if you are not a Retail.EU in any case.
Yeah it's leaktime, gonna also back up those in Brazil
Skrilax_CZ said:
Yeah it's leaktime, gonna also back up those in Brazil
Click to expand...
Click to collapse
:highfive:
Love the leaks. Thanks firmware team!
Here: http://sbf.droid-developers.org/smi/list.php
Wait for it to DL.
O2 DE
CFC_signed_customer_8.7.1I-110_IFW-DE-31_O2DE.xml.zip
Hey Guys, i got a lil Question. I have to manage the RazR i Forum here in Germany. Problem is, i own just the regular RazR.
Is there any big difference by flashing the RazR i Fastboot Files, compared with the OG RazR?
BTW: Nice How to's for unlocking the Bootloader & Root. I've used them to write an German one (of course with Links to Mattlgroffs Threads )
HSD-Pilot said:
Hey Guys, i got a lil Question. I have to manage the RazR i Forum here in Germany. Problem is, i own just the regular RazR.
Is there any big difference by flashing the RazR i Fastboot Files, compared with the OG RazR?
BTW: Nice How to's for unlocking the Bootloader & Root. I've used them to write an German one (of course with Links to Mattlgroffs Threads )
Click to expand...
Click to collapse
The filesystem is different, but the basic understanding is the same. bos is the bootloader, boot is kernel, cdrom is the mounted ISO, gpt is the partition table, logo is the boot logo, ulogo is the unlocked version of bootlogo, radio, recovery, system. A few others like ifwi, dnx, and sp.img I am not too familiar with. I am posting my firmware charger (includes German O2), on here and DroidRzr.com (got a post here now).
If you want to stay safe only flash system and boot. I haven't done anything else and been find. Been on German, Brasil, EU, GB firmwares all on my GB device with GB radio fine. If you want add me on gtalk and I can help with what I can ([email protected])
Thanks for Reply, i'll add the warning in to the Fastboot Thread, after open it tomorrow. I guess i will have some Questions, so i will send you an Message via GTalk.
Meanwhile i'm lurking on Amazon and the i will be realesed in Germany tomorrow.
We'll see, maybe something new to play with this year...
mattlgroff said:
Warning: If your phone is not a Retail.EU model and has NOT been bootloader unlocked please do not try these.
I am unlocked and started with Retail.GB. I can flash system, boot, recovery fine. I would not suggest flashing the other parts or the whole file in RSD if you are not a Retail.EU in any case.
Click to expand...
Click to collapse
How can you flash files bigger then 100mb.
I can't flash the system_signed because file is too big.
So now i have a bricked phone..
arnoldl said:
How can you flash files bigger then 100mb.
I can't flash the system_signed because file is too big.
So now i have a bricked phone..
Click to expand...
Click to collapse
The new RSD Lite supports it (I believe) as well as the new fastboot binary.
Thanks to http://aosp.us for these: http://www.aosp.us/wp-content/files/fastboots.zip
mattlgroff said:
The new RSD Lite supports it (I believe) as well as the new fastboot binary.
Thanks to http://aosp.us for these: http://www.aosp.us/wp-content/files/fastboots.zip
Click to expand...
Click to collapse
YOU'RE THE BEST!!!!! that's it...
my phone is now back alive with the EN firmware....
THANKS!!
Anyone with an locked BootLoader tried to flash the Retail EU by using RSD 6.1.4?
It would be great, if someone can confirm that they're flashable like regular Fastboots on an XT910 with the newer Version of RSD.
Locked=Yes...(for me)...
therazrguy said:
...Currently we have the Retail.eu fastboot files, more coming soon, ...
Click to expand...
Click to collapse
Hi,
I have a RAZRi with system version 81.5.32002.XT890.Retail.en.EU... If you are interrested and if someone explain me how to extract it to a file, I can punlish this version...
lebobo said:
Hi,
I have a RAZRi with system version 81.5.32002.XT890.Retail.en.EU... If you are interrested and if someone explain me how to extract it to a file, I can punlish this version...
Click to expand...
Click to collapse
I will PM you the info
mattlgroff said:
I will PM you the info
Click to expand...
Click to collapse
Why is that, wouldn't the info be interessing for everyone ?
JackyJack said:
Why is that, wouldn't the info be interessing for everyone ?
Click to expand...
Click to collapse
Maybe, it's not a big secret...it's common android debugging commands. I've already posted the system backup command, and pulling the boot.img is just a dd command to copy it to the SD card.
Code:
adb shell
su
make_ext4fs -s -l 885768704 -a system /sdcard/system.img.ext4 /system
dd if-/dev/block/mmcblk0p5 of=/sdcard/boot.img
Yeah I saw it before, but where ever the questions is, we should be able to find the answer
New Updates 32
Enviado desde mi HTC Sensation XE with Beats Audio Z715e usando Tapatalk 2
I unlocked my bootloader and everything was fine. Then I installed CM10.1.2 and it loads to the initial Welcome screen (where you select country) but the touch doesn't work at all. The volume and power button works but I can't tap anything.
Also no softbutton shows.
I also tried flashing CM10.1.0 and the latest FXP rom.
If anyone helps solve this it would be so appreciated.
Sounds like you flashed the wrong version for your phone.
Which phone do you have and which cm dud you flash
Sent from my LT30p using xda premium
gregbradley said:
Sounds like you flashed the wrong version for your phone.
Which phone do you have and which cm dud you flash
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
I have an Xperia T and I flashed CM Mint.
ok, try flashing a stock ftf in flashtool to see if touch screen comes back.
If that works redownload the cm mint .zip and try flashing it again.
Let me know how you get on
gregbradley said:
ok, try flashing a stock ftf in flashtool to see if touch screen comes back.
If that works redownload the cm mint .zip and try flashing it again.
Let me know how you get on
Click to expand...
Click to collapse
Okay trying to find an appropriate stock ftf, or does it not really matter?
Like if I had a central european unbranded one or something on my UK Orange phone?
foxyfennec said:
Okay trying to find an appropriate stock ftf, or does it not really matter?
Like if I had a central european unbranded one or something on my UK Orange phone?
Click to expand...
Click to collapse
doesn't matter, just make sure its fir the right phone model or use one of mine from the all in one thread (Its Vodafone, but that does not matter)
gregbradley said:
doesn't matter, just make sure its fir the right phone model or use one of mine from the all in one thread (Its Vodafone, but that does not matter)
Click to expand...
Click to collapse
I flashed yours onto my phone and it loads up but the same problem happens The touchscreen still doesn't work.
I saw this earlier before heading to work: http://forum.xda-developers.com/showpost.php?p=39920703&postcount=11
But when I adb shell I don't get a [email protected] I have some garbled text. Basic commands like ls work. su is not found though, neither is the rmi4_fwloader command found. But then adb devices showed it in "recovery" mode not "device". Though on this computer adb devices shows nothing but fastboot does. Did flashing the stock rom relock it?
Thanks
foxyfennec said:
I flashed yours onto my phone and it loads up but the same problem happens The touchscreen still doesn't work.
I saw this earlier before heading to work: http://forum.xda-developers.com/showpost.php?p=39920703&postcount=11
But when I adb shell I don't get a [email protected] I have some garbled text. Basic commands like ls work. su is not found though, neither is the rmi4_fwloader command found. But then adb devices showed it in "recovery" mode not "device". Though on this computer adb devices shows nothing but fastboot does. Did flashing the stock rom relock it?
Thanks
Click to expand...
Click to collapse
That postwas my next piece of advice to you...
ok, have you unlocked your bootloader? Have you rooted the new firmware? Use bin4ry or doomlords rooting method to root the firware and try again.
also, you can use a USBOTG cable and a mouse to control the phone instead of the touchscreen
gregbradley said:
That postwas my next piece of advice to you...
ok, have you unlocked your bootloader? Have you rooted the new firmware? Use bin4ry or doomlords rooting method to root the firware and try again.
also, you can use a USBOTG cable and a mouse to control the phone instead of the touchscreen
Click to expand...
Click to collapse
The bootloader was still unlocked after putting your firmware on.
Is there a way of enabling usb debug mode outside of the phone? I'm guessing that's what's needed to get adb shell to work.
Woohoo! Progress! Still broken, but progress!!!!
I installed PdaNet and it made adb drivers work. Then I did adb shell from recovery.
This part is important:
The path is messed up on my phone so if anyone has trouble with that method for similar reasons would have to do the same:
Code:
/sbin/su
/system/bin/rmi4_fwloader -b /system/etc/firmware/touch_module_id_0x32.img -d /sys/bus/rmi4/devices/sensor00 -r -f
(echo $PATH is /sbin/ but for some reason su doesn't work without /sbin/. if /sbin/su doesn't work what I actually did was cd /sbin then su)
(It is important to run /system/bin/rmi4_fwloader because it simply can't find rmi4_fwloader, even if you cd /system/bin/)
Now my touch works! I just have no software buttons
Any idea how to get my.. nevermind, after going through the startup bit they just appeared.
Thank you you are a genius!
No problem, Glad its sorted for you now.
I'm trying to root my Motorola Razr i XT890.
First I need to unlock the bootloader (right?), so I was fallowing this thread: Unlock the Bootloader on Your RAZR i
The thread is about 2 years old, so if is there any new solution for rooting my phone, please point me to the right direction.
1. I've downloaded the USB driver and the full SDK from moto site. I've installed the USB driver and unzipped the SDK (I was not able to find any install.exe, I clicked "SDK Manager.exe" but nothing happens).
2. Config the phone to USB debug, reboot in fastboot mode, plugged to USB.
3. I opened the CMD, get into the adt-bundle-windows-x86_64-20140321\sdk\platform-tools\ where fastboot.exe and typed: fastboot oem get_unlock_data
the result is: FAILED (remote: Restricted OEM command)
Some phone data:
Version: 982.50.29.XT890.Brasil.en.BR
Kernell: 3.0.34-gf0ff387
[email protected]) )
I've never rooted a phone or anything, so please, give me detailed newbie help. Thanks in advance! :good:
Pedro77 said:
I'm trying to root my Motorola Razr i XT890. First I need to unlock the bootloader (right?)
Click to expand...
Click to collapse
Welcome.
You don´t need to unlock the bootloader to root!
If you are on JB 4.1.2 than the only you need is: "Twerk my Moto" http://forum.xda-developers.com/showthread.php?t=2541398
If you are on ICS 4.0.4 you will need "motofail2go". (second link in OP) http://forum.xda-developers.com/showthread.php?t=1928509
Hope i could help. Good luck!
Thank you for the info. So I do not need to unlock the bootloader. Nice. Anyway, this is odd that I'm not allowed to do so. Also, there is almost no info about this issue.
My Android version is 4.1.2. I followed the link you pointed and the instructions are:
To use:
adb push su /data/local/tmp/
adb push rootme.sh /data/local/tmp/
adb push TwerkMyMoto.jar /data/local/tmp/
adb shell chmod 755 /data/local/tmp/rootme.sh
adb shell /data/local/tmp/rootme.sh
adb reboot
adb shell /data/local/tmp/rootme.sh
Click to expand...
Click to collapse
What a heck is this?
Can you give me some help with it?
Pedro77 said:
What a heck is this?
Can you give me some help with it?
Click to expand...
Click to collapse
ADB is a comandline-tool like cmd.exe, google how to use...
1. Install RAZRi drivers.
2. Enable USB-Debugging in Developer-Options on Handy.
3. Download ADB files (ADB is a comandline-tool, google how to use)
4. Extract "TwerkMyMoto.zip" (rootme.sh + SU + TwerkMyMoto.jar MUST be in same folder with ADB.exe)
5. Connect your RAZRi to PC and run ADB.exe. Check if ADB shows Handy as "device".
6. Follow the Steps "To use". (You have to copy and paste each line in the ADB-Window and execute it)
Good luck!
Thank you very much, as son as I try it I'm going to post the result here!
Yeah, it worked just fine!
I have a doubt:
To use:
...
adb shell /data/local/tmp/rootme.sh
adb reboot
adb shell /data/local/tmp/rootme.sh ->
Click to expand...
Click to collapse
Why I need to exec this line again?
Pedro77 said:
Yeah, it worked just fine!
Why I need to exec this line again?
Click to expand...
Click to collapse
Congrats for rooting your first device :good:
I have had a look in the source code some time ago...
something is loaded into system filesystem and needs a reboot to commit changes.
After that it needs to execute again. So thats why the line is doubled...
Did u test if root is working?
And it would be nice if you hit "Thanks" Button if i could help :cyclops:
greetz
Oh, sorry I'm new to the forum practices. Thanks button pressed! :good:
And yes, I did checked the root, it worked!
Pedro77 said:
Oh, sorry I'm new to the forum practices. Thanks button pressed! :good:
And yes, I did checked the root, it worked!
Click to expand...
Click to collapse
Nice!
I hope this root-methode is still working after KitKat Update in the next weeks...
Now u are rooted i recommend u to enable Adobe Flash: http://forum.xda-developers.com/showthread.php?t=1952878&page=4 (last page)
And to start modding try "Xposed Framework". There u can load tons of "mods" on to your handy.
i recommend "Xposed Framework" + GravityBox + YouTube Addaway.
(maybe its better to backup your important Data befor playing around...)
And no worries that u mess up your device. If u stuck in bootloops or something else is broken just flash back your original firmware with RSD-Lite: http://forum.xda-developers.com/showthread.php?t=2239706
So, have fun with your rooted device and thanks for pressing Thanks-Button!
Using RSD with unlocked BL work fine?? RSD relock BL?
Sent from my XT890 using xda app-developers app
AlmapekeDj said:
Using RSD with unlocked BL work fine?? RSD relock BL?
Click to expand...
Click to collapse
RSD should also work with unlocked bootloader...
And i think there was a trick to relock bootloader by flashing some files, but i dont know the files.
You have to search in this Forum for relock-tutorial ...
P.S. What Kind of Music did you play? Psytrance/GOA?
AlmapekeDj said:
Using RSD with unlocked BL work fine?? RSD relock BL?
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
from my personal experiences: using RSD-Lite with unlocked BL works like a charme
And no, it will not relock your BL
To relock you can use this guide: http://forum.xda-developers.com/showpost.php?p=44430691&postcount=4
Hi there, I am having the same issue but my OS version is 4.4.2 now.
There is also a nice guide here: http://forum.xda-developers.com/showthread.php?t=1928551
But I would still need the code.....
So what do you propose I should do? I only need root so I can use a directory binding tool to make some room on the internal space, I ran out and can no longer update the apps....
(Btw. I did unlock my first RAZR, but that one broke down so now I am on an used one.. )
Thanks!
Hi everybody, my phone is brick so I need pit file to creat repair boot sdcard. If any one has pit or can read system dump pls share me.
Thanks so much.
If phone was rooted:
Pls read dump:
Adb shell
Su
dd if=/dev/block/mmcblk0 of=/sdcard/E470S_2gb_dump.img bs=1024 count=2097152
then get 2gb dump
Thanh_GSM said:
Hi everybody, my phone is brick so I need pit file to creat repair boot sdcard. If any one has pit or can read system dump pls share me.
Thanks so much.
If phone was rooted:
Pls read dump:
Adb shell
Su
dd if=/dev/block/mmcblk0 of=/sdcard/E470S_2gb_dump.img bs=1024 count=2097152
then get 2gb dump
Click to expand...
Click to collapse
Did you try looking on SamMobile.com? Here's a link to the latest firmware.
Devo7v said:
Did you try looking on SamMobile.com? Here's a link to the latest firmware.
Click to expand...
Click to collapse
Thanks, but not has pit file
Shv-e470s hard bricked
Thanh_GSM said:
Thanks, but not has pit file
Click to expand...
Click to collapse
Bro! i got Samsung GS4 shv-e470s and it's got dead while i was updating costume firmware.
now there is no sign of life, no power on... no recovery mode... no downloading mode...
Please Help!!!!!!!!!!!!!!!!!!!
s4 active shv-e470s
helo friend had similar problem while installing custom rom.
my phone went total dead.
dont try anything. if its under warranty send to SAMSUNG service centre...
i sent the phone to samsung service centre, they replaced the mother board... ( no warranty-- i paid 120 US DOLLARS)
now my phone is back to life...
Thanh_GSM said:
Thanks, but not has pit file
Click to expand...
Click to collapse
Using 7-zip, you can extract the pit file from the firmware, it should be in the CSC file.
kichaz said:
helo friend had similar problem while installing custom rom.
my phone went total dead.
dont try anything. if its under warranty send to SAMSUNG service centre...
i sent the phone to samsung service centre, they replaced the mother board... ( no warranty-- i paid 120 US DOLLARS)
now my phone is back to life...
Click to expand...
Click to collapse
Would you mind if u creat dump for me? Thanks
how to create a dump
Helo can you post the link how to create a dump file..
Shv-e470s hard bricked
kichaz said:
helo friend had similar problem while installing custom rom.
my phone went total dead.
dont try anything. if its under warranty send to SAMSUNG service centre...
i sent the phone to samsung service centre, they replaced the mother board... ( no warranty-- i paid 120 US DOLLARS)
now my phone is back to life...
Click to expand...
Click to collapse
Thanks for immediate reply,
warranty is invalid now, did you try for JTAG? or any other procedure?
kichaz said:
Helo can you post the link how to create a dump file..
Click to expand...
Click to collapse
Root your phone (if you dont mind about lossing waranty) then use these CMD command
Adb shell
Su
dd if=/dev/block/mmcblk0 of=/sdcard/E470S_2gb_dump.img bs=1024 count=2097152
Thank you.
thanks boz
Thanh_GSM said:
Root your phone (if you dont mind about lossing waranty) then use these CMD command
Adb shell
Su
dd if=/dev/block/mmcblk0 of=/sdcard/E470S_2gb_dump.img bs=1024 count=2097152
Thank you.
Click to expand...
Click to collapse
thank you very much buddy
another method i found..
# 9900 # (System Dump) 319712358 (SKT Hidden Menu, password = 996 412)
kichaz said:
thank you very much buddy
another method i found..
# 9900 # (System Dump) 319712358 (SKT Hidden Menu, password = 996 412)
Click to expand...
Click to collapse
hey did you make the pit file?
if yes then can you please send me link.
thanks.
Heimdall flashing tool can extract PIT Partition Information Table. Anyone with same phone as OP in healthy status can do that.
Bevare the Thanks Button
Pit file for e470s
Devo7v said:
Using 7-zip, you can extract the pit file from the firmware, it should be in the CSC file.
Click to expand...
Click to collapse
how can i use 7-zip to get the pit file \, bro ?
kashifyounus said:
Bro! i got Samsung GS4 shv-e470s and it's got dead while i was updating costume firmware.
now there is no sign of life, no power on... no recovery mode... no downloading mode...
Please Help!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
have you fixed it ? my phone now is like what you described =(((((