Can someone provide a link to the RiscOS sd image, The link is this http://www.svrsig.org/RISCOS_Distro.zip The file was removed because of an official release, However I would like to play with it now. does anyone have a copy?
tjsooley said:
Can someone provide a link to the RiscOS sd image, The link is this http://www.svrsig.org/RISCOS_Distro.zip The file was removed because of an official release, However I would like to play with it now. does anyone have a copy?
Click to expand...
Click to collapse
Here you go my friend, I have attached to this post a zip containing the sd card image of RiscOS for the RPi and a tool to that helps put the image onto a SD card .
It also appears on the download section of the Raspberry Pi site.
http://www.raspberrypi.org/downloads
Related
Hi there is there anyone who has a similar gps device and are able to upload the rom on an SD card so i can repair the rom. The device is a Logic Gear SL350 also sold as a Nuevo E610 or a Ramar device, and many more, if i cannot get a rom, is there a way i could get the device working as it now only boots to the startup screen and doesn't go any further
The Bootloader works and i am able to update the rom and eboot.bin file, does anyopne have a win ce 4.2 or 5 NK.NBO file for a samsung SS2440 processor, I have done a search and the device is also known as a blue panther.
Please help
Thanks Mark
FIXED IT
I have just fixed it, after searching the net for nk.bin and eboot files works great, Logic gear support was useless
Flashed it with a GMP350 rom
2234jones said:
I have just fixed it, after searching the net for nk.bin and eboot files works great, Logic gear support was useless
Flashed it with a GMP350 rom
Click to expand...
Click to collapse
i, can you send me a link with thar rom?
Thx//
GMP-350 Rom
Sorry about the late reply but could not find it any where as did not save the link, and yet again my gps unit played up. I have now uploaded it to Rapidshare link as follows:-
http://rapidshare.com/files/288891821/gpsrom.rar.html
1. format your sd card to Fat32
2. download the file from the link above
3. Extract files with winrar
4. Copy the files to the sd card
5. insert the SD card
6. turn the device on and hold the power button
7. Update program will run
8. DO NOT SWITCH OFF THE DEVICE JUST BE PATIENT
9. It will reboot by itself after about four minutes.
10. hey prestow.
If you do not like my logo picture, just find a picture of the same size and rename logo.bmp and reformat card and only copy the logo file to the sdcard and it will change the logo picture, or just don't copy it when you update the rom, hope this helps.
Hi there... can you resend the files pls... the rs link is broke. thnks
Hey all, I'm currently in RA after flashing the recovery image , and I'm trying to install the FRESH rom on there but for some reason when I try to "Flash zip from sdcard" it's telling me "No zip files found." Why is that? I have the whole zip folder placed in the main SD card, so why is it telling me it's not found?
BOOGIE_BOTZ said:
Hey all, I'm currently in RA after flashing the recovery image , and I'm trying to install the FRESH rom on there but for some reason when I try to "Flash zip from sdcard" it's telling me "No zip files found." Why is that? I have the whole zip folder placed in the main SD card, so why is it telling me it's not found?
Click to expand...
Click to collapse
I responded to you on http://GeekFor.Me, but the reason is because RA looks in the root of sdcard, the zips can't be inside of any folders.
So does that mean I have to take out all the individual files and place them directly into the root of the sdcard? Because I just basically copied the download folder and dropped it into the root. Thanks for the reply
BOOGIE_BOTZ said:
So does that mean I have to take out all the individual files and place them directly into the root of the sdcard? Because I just basically copied the download folder and dropped it into the root. Thanks for the reply
Click to expand...
Click to collapse
You need to leave the files in a .zip, but yea that zip needs to be on the root of the sdcard.
The only file you need to install the rom is fresh-cdma-hero-20d.zip (for fresh rom 2.0d). Any other zips are just addons or tweaks or whatever they may be.
flipzmode said:
You need to leave the files in a .zip, but yea that zip needs to be on the root of the sdcard.
The only file you need to install the rom is fresh-cdma-hero-20d.zip (for fresh rom 2.0d). Any other zips are just addons or tweaks or whatever they may be.
Click to expand...
Click to collapse
Hmm, I'm on a Mac and maybe it's me but the link I download from gives me an actual folder rather than a zip. And when I rename the folder to a zip, it gives an error. Is there a mirror link to download an actual zip folder?
Boogie when you download it dont opening after it finishes downloading .. just use the finder to navigate to where its at and then copy that to your sd .. when you open it on a mac it will automatically create the extracted folder .. hope this helps ...
Sounds like your using Safari to download it. To make this easier in the future go to Safari > Preferences > General and make sure that "Open safe files after downloading" is NOT check-marked.
Safari is unpacking the zip file for you. The file you want is in your trash bin, drag it to the root of your SD card and that's it..
Ok I'm gonna give it another go. Since I made it all the way through to the RA stage, there's no reason I shouldn't be able to flash the rom is there?
Thanks for all the help everyone I finally got it to flash the FRESH rom, but once I rebooted it, it's still in the "HTC" branded screen. Is it loading? It's not going anywhere but this screen, although I know it's doing something because the animation shine is moving.
BOOGIE_BOTZ said:
Thanks for all the help everyone I finally got it to flash the FRESH rom, but once I rebooted it, it's still in the "HTC" branded screen. Is it loading? It's not going anywhere but this screen, although I know it's doing something because the animation shine is moving.
Click to expand...
Click to collapse
After flashing a new ROM, it can take up to 10 minutes or so to load.
Nice Everything is all good! Now my last question is how do I get the removed apps from the ROM back onto here? I actually prefer to have some of those programs back onto the phone.
BOOGIE_BOTZ said:
Nice Everything is all good! Now my last question is how do I get the removed apps from the ROM back onto here? I actually prefer to have some of those programs back onto the phone.
Click to expand...
Click to collapse
There is a link in the release notes to download all the removed apk's from Fresh Rom. You will then need to use adb push to push them back to /system/app. Search for how to setup adb on a mac as I honestly don't know.
Hi guys, I got message about new update on B560
I downloaded it and i'm going to give update.zip to you guys instantly when i have finished uploading file with my slow network.
If someone gets link before me. Link it here and i will edit it to this message
Model: ALE-L21
Android: 6.0
EMUI: 4.0
Firmware: B564
Build: ALE-L21C432B564-FULL
Region: Europe
Status: Official
Type: Full
Size: 1,48 Gb
Download
https://mega.nz/#!SU93FKwA!aa7rt_ToeplclhAPZ9XzeyLUZX9c5vV1EQiOfXFUHWQ
Installation
NOTE: I DON'T TAKE CARE ABOUT ANYTHING THAT MAY HAPPEN TO YOU PHONE!
YOU DO THIS AT YOUR OWN RISK
Normal upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package UPDATE.APP to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card. Check if the whole file list in sdcard,
Insert the Micro SD card into the handset and power on. After entering call -> enter:*#*#2846579#*#* -> ProjectMenu -> Software Upgrade -> SDCard Upgrade-> OK.
Force upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card. Check the file list is right.
Step 4. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 5. When the progress bar stop, the phone will restart automatically.
## Changelog ##
This update improves system performance and stability.
[Fixes]
Fixed an issue where 1080p videos can't be uploaded to Twitter.
Fixed an issue where Huawei Watch occasionally doesn't receive messages.
Fixed an issue where some UI elements are displayed incorrectly.
[Optimizations]
Improved system performance and stability for smoother operations
Improved device security with latest Google security patches.
Vika__ said:
Hi guys, I got message about new update on B560
I downloaded it and i'm going to give update.zip to you guys instantly when i have finished uploading file with my slow network.
If someone gets link before me. Link it here and i will edit it to this message
Click to expand...
Click to collapse
Thanks for sharing this ROM bro. I need this to cooking custom :cyclops:
Uploaded almost 200mb to Mega.
So sad that i have ~200kb/s upload speed but. Have to go what i have
If someone afterwards uploads this somewhere else server. Give link to me and i will put it in first post
Got this as update on B550 as well! Updating now.
Edit: Contains Pro camera mode! No light painting though.
Download link online
Vika__ said:
Download link online
Click to expand...
Click to collapse
downloading.
thanks
can someone share a screen shot of the pro camera mod ?
AmINoS007 said:
can someone share a screen shot of the pro camera mod ?
Click to expand...
Click to collapse
http://i.imgur.com/Xx9O3wG.png
i'm in b550 and receive update to b564, size 213 mb
but I dont know how to use it.
where is the UPDATE.APP file? i extraxt it from zip and there is many many file.
MyGalaxysIII said:
where is the UPDATE.APP file? i extraxt it from zip and there is many many file.
Click to expand...
Click to collapse
Update app is inside the zip. You don't need to bother those other files.
Thx guys for the pics
does OTA work on twrp recovery??
i received OTA update but i am on TWRP recovery
For me it worked but i don't promise it will work for you
Edit: but remember if it works. Update still installs stock recovery so you have to flash twrp again
Vika__ said:
For me it worked but i don't promise it will work for you
Edit: but remember if it works. Update still installs stock recovery so you have to flash twrp again
Click to expand...
Click to collapse
i already downloaded the zipped file.. how can i flash that??
do i need to extract it and flash via adb or just flash the zipped file
P.S. i switched back to stock recovery
Installation methods are on first post
OTA update is taking too long to download..
72~100 K/s...
Sent from my ALE-L21 using XDA-Developers mobile app
Since we're pointing out changes, Spotify now shows album covers on our lockscreen just like the native music app.
Really cool! The fact that it showed info on the current song that was playing but not the album cover was bugging me a lot.
I am stuck at 19%.. It's been 10 minutes already.. I tried local update (from @sokkoban's blog)...
I have followed http://forum.xda-developers.com/showthread.php?t=2166921 to try to install Touch on the p3113, but the device and ubuntu specific links are down. I have the device specific that I got from a mediafire link that someone posted on there, but people say that it might not work. I tried to search in http://cdimage.ubuntu.com/ and the old version, but I was out of luck as I could not find the "quantal-preinstalled-phablet-armhf.zip" which is the ubuntu generic file. If I DID find a quantal folder in those archives, it would always be for the desktop. In the link to the ubuntu download page for that file, "cdimage.ubuntu.com/ubuntu-touch-preview/quantal/mwc-demo/quantal-preinstalled-phablet-armhf.zip" You can see the "ubuntu-touch-preview" part of the link, which does not exist. I'm thinking that the people hosting the server have deleted the preview, for us to be left with only a "ubuntu-touch" folder which does not contain anything to do with quantal. May someone please reupload that file if you have it?
The link to R.A.H._TWRPv2.6.3__BigPart_selinux.zip takes you to Dev-Host, which for a file hosting website is useless! Trying to download this file takes you from advertisement to advertisement and exposes folks to potential malware. One page was even blocked as an attack page. Long story short is I need R.A.H._TWRPv2.6.3__BigPart_selinux.zip to successfully BigPart partion my Everest (European version) Xoom (BigPart partitioned) and cannot find a download source anywhere.
I'd be grateful if someone with this file will send it to me.
Thanks!
Found the file!
I found the file on one of my micro-sd cards. If anyone needs this file, let me know.