Database Develop

[Q] my GALAXY S plus dont wont turn on, is it Bricked,Please help....

my Galasy s Plus i9001 , dont wont to turn on after i instal new room from recovery mode
Please advise what can i do now.

do you get into the download mode? hold power, vol-, home
then you can flash with odin

Still doesnt work
dr.wtf said:
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Click to expand...
Click to collapse
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance

mr_guitar_eg said:
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
Click to expand...
Click to collapse
See response in other thread:
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...
What did you do to get your phone in this mode?! Give is some more info on what happened...

Thanks for your fast reply, please see the below details
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance

mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Try removing the battery and charge cable for a while (at least 30 minutes or so). I've not heard this happened before... and try charging with another cable and/or with another charger (for instance a laptop or some other usb device)...

mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Arabic rom ??
Sent from my GT-I9001 using xda premium

rayiskon said:
Arabic rom ??
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Good catch. What ROM did you exactly try to install??

Gingerbread 2.3 arabic
I think the problem that it is for smsung galaxy s not s plus

nikagl said:
Good catch. What ROM did you exactly try to install??
Click to expand...
Click to collapse
It is a miui rom with arabic language! My phone is from hungary as i live there, so it is europan ,

mr_guitar_eg said:
I think the problem that it is for smsung galaxy s not s plus
Click to expand...
Click to collapse
Never install mods, addons, ROMs, kernels or anything made for whole Another phone.
Yes, that's the problem. I'm very sorry to tell you but you just destroyed your phone's boot.img by installing wrong one. And the wrong boot.img wont let you do anything on your phone. There's no way you could enter to recovery or download mode or anything.
I have no idea about the JIG thing but when I hard bricked my phone, I took it to the reseller and got it fixed for free of charge

Is there a golden card method
Any idea if there is a golden card method to create an boot image to let the phone start again

mr_guitar_eg said:
Any idea if there is a golden card method to create an boot image to let the phone start again
Click to expand...
Click to collapse
Your phone is kind of dead now. You can't push a boot image to it 'cause computer doesn't recognize it properly. Bricked means your phone is just as useful as a brick. It wont turn on in any way and there's nothing else your phone would do.

The JIG costs only 2$ , if that doesn't get u into download mod then u can only revive ur phone with JTAG .
Sent from my GT-I9001 using xda premium

Any details about this 2 methods???

JIG on ebay...
http://www.ebay.pl/itm/USB-JIG-Dongle-unbrick-reset-mod-ROM-para-SAMSUNG-GALAXY-II-2-S2-i9100-ESPANA-/260928351223?pt=LH_DefaultDomain_186&hash=item3cc08aabf7

My advice is go see if u can repair it for free (warranty) , if not u can try the JIG to get u into download mode so u can flash via Odin (there are a lot of clips about JIGs on youtube) , if all that doesn't work JTAG is ur only hope (also there are videos about it on youtube).
Sent from my GT-I9001 using xda premium

Better Soluction
It ocurred me and I go to Movistar Shop and I said that it doesn't boot and I don't know anything and they give me another one with the guarantee.
Try and if not try with JIG ,

me 2, think you installed the wrong rom on the wrong phone..MIUEI rom is not out for the GT I9001, when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)

As the partition layout and even the filesystem is totally different I think you wiped away your bootloader and maybe also radio firmware. If this is your actual situation, it is ver very VERY unlikely you will get your phone alive with a jig. Don't know the partition layout of a 9000 but even the hardware is completely different. Not nucb hope left, very sorry.
Sent from my GT-I9001 using XDA App

I believe HARD Brick

Please don't tell me it I am an idiot and it is found else where
I was upgrading my fiance S5570 so I installed CWM using the odin method.
then it didn't work so I did an idiot thing where I downloaded ROM manager and installed a wrong version of CWM.
I Had BLACK SCREEN DEAD mobile
but now
when I pres vol up + Home +power
odin reads the mobile but whenever I try to flash anything it stops at setup connection forever
Please help and if you can give me step by step guid

afasseeh said:
Please don't tell me it I am an idiot and it is found else where
I was upgrading my fiance S5570 so I installed CWM using the odin method.
then it didn't work so I did an idiot thing where I downloaded ROM manager and installed a wrong version of CWM.
I Had BLACK SCREEN DEAD mobile
but now
when I pres vol up + Home +power
odin reads the mobile but whenever I try to flash anything it stops at setup connection forever
Please help and if you can give me step by step guid
Click to expand...
Click to collapse
are u able to go in normal recovery mode....from there flash cwm again n install any custom rom

There nothing to do. Rom manager hard bricked your phone.
Sent from my GT-S5570 using xda premium

lightstar3103 said:
There nothing to do. Rom manager hard bricked your phone.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
why you de-motivate other person, when you don't know anything
rom manager forced the mobile to go to recovery mode and when you have wrong recovery it will not boot
take out battery for sometime put it again then press volume down home power you will be in download mode then just flash the firmware

First of all thanks for help everyone..
but i cant go to download mode..
however when i press vol up+home+power odin can read the phone.
i tried to pres download mode combo the insert battery
tried it when usb is connected and not
even one time connected from both sides and once from one side only

do you have a USB jig
and what combo you tried to go into download mode

dheeraj (dhlalit11) said:
do you have a USB jig
and what combo you tried to go into download mode
Click to expand...
Click to collapse
I use vol down+home+power
and i dont have a usb jig but I am going to buy the resistors and try to make one

afasseeh said:
I use vol down+home+power
and i dont have a usb jig but I am going to buy the resistors and try to make one
Click to expand...
Click to collapse
Not trying to be pessimistic, but if the jig does't work, ur only option will be service centre. Gud luck bro.

kirakun said:
Not trying to be pessimistic, but if the jig does't work, ur only option will be service centre. Gud luck bro.
Click to expand...
Click to collapse
I made the usb jig it worked fine on my galaxy note. but didnt on the mini.. I believe I need the jtag now which I will not buy it because it is expensive . hard to use. and I am not sure it will work..
so I will go to the service centre.
do u know what shall i say.. that electricity went down while upgrading or what..
and what do you expect to be the response. phone is still in guarantee

afasseeh said:
I made the usb jig it worked fine on my galaxy note. but didnt on the mini.. I believe I need the jtag now which I will not buy it because it is expensive . hard to use. and I am not sure it will work..
so I will go to the service centre.
do u know what shall i say.. that electricity went down while upgrading or what..
and what do you expect to be the response. phone is still in guarantee
Click to expand...
Click to collapse
Sounds good to me. They will probably say they will look at it and u will get it in 2 weeks...

afasseeh said:
I made the usb jig it worked fine on my galaxy note. but didnt on the mini.. I believe I need the jtag now which I will not buy it because it is expensive . hard to use. and I am not sure it will work..
so I will go to the service centre.
do u know what shall i say.. that electricity went down while upgrading or what..
and what do you expect to be the response. phone is still in guarantee
Click to expand...
Click to collapse
say: i was upgrading to 2.3.6 gingerbread via kies when suddenly my pc ( or laptop ) shutdown

Messi10 said:
say: i was upgrading to 2.3.6 gingerbread via kies when suddenly my pc ( or laptop ) shutdown
Click to expand...
Click to collapse
thanks.. i will do so.. but what do u expect they would say..
1 we will repair
2 it is not our fault
3 u can exchange it for something in same price category
4 pay 20% of price and get one new..
what do u expect the scenario would be

afasseeh said:
thanks.. i will do so.. but what do u expect they would say..
1 we will repair
2 it is not our fault
3 u can exchange it for something in same price category
4 pay 20% of price and get one new..
what do u expect the scenario would be
Click to expand...
Click to collapse
1

Phone dead..

I was just being too lazy to enter recovery using keys combo I installed an app from the market to boot into recovery.
https://play.google.com/store/apps/...sMSwxLDEsImNvbS50cmFuc2Zvcm1lci5yZWNvdmVyeSJd
Now my phone doesnt start (No screen, Key lights not even download or recovery mode). Doesnt charge too..Any help..??
Rom: Cleanote V5
Kernel: NoteCore V14

ohmy
Ohmy if im not mistaken, that app is for the asus transformer yet you used it on a galaxy note....
Only step i can think of is if you can manage to get into recovery there, you can wipe data. This would reset you to default..
Or if it really cant get in there, then just flash back to gingerbread and back to your preferred rom..

capitansid said:
Ohmy if im not mistaken, that app is for the asus transformer yet you used it on a galaxy note....
Only step i can think of is if you can manage to get into recovery there, you can wipe data. This would reset you to default..
Or if it really cant get in there, then just flash back to gingerbread and back to your preferred rom..
Click to expand...
Click to collapse
+1 that, try to wipe all 3 in cwm first and if that doesnt help flash rooted gb rom from my sig.
Sent from my GT-N7000

capitansid said:
Ohmy if im not mistaken, that app is for the asus transformer yet you used it on a galaxy note....
Only step i can think of is if you can manage to get into recovery there, you can wipe data. This would reset you to default..
Or if it really cant get in there, then just flash back to gingerbread and back to your preferred rom..
Click to expand...
Click to collapse
I cant get too recovery or download mode. Not even the galaxy note logo. Nothing happens after pressing power button also cant use adb because It has usb debugging on.

Mr Colt said:
I cant get too recovery or download mode. Not even the galaxy note logo. Nothing happens after pressing power button also cant use adb because It has usb debugging on.
Click to expand...
Click to collapse
Try again and if you still not able to boot in download mode manually then use JIG method.
Sent from my GT-N7000

Doesn't sound good to me...
Just a thought, why not try to take out the sd card and booting again?
Try turning it on when connected to usb and see if the pc detects a connected device.
I don't know much about this, but if you can't get ANY sign from your phone, it might be hard bricked...

capitansid said:
Ohmy if im not mistaken, that app is for the asus transformer yet you used it on a galaxy note....
Only step i can think of is if you can manage to get into recovery there, you can wipe data. This would reset you to default..
Or if it really cant get in there, then just flash back to gingerbread and back to your preferred rom..
Click to expand...
Click to collapse
jeetu1981 said:
Try again and if you still not able to boot in download mode manually then use JIG method.
Sent from my GT-N7000
Click to expand...
Click to collapse
Ordered on ebay. Thanks
selman555 said:
Just a thought, why not try to take out the sd card and booting again?
Try turning it on when connected to usb and see if the pc detects a connected device.
I don't know much about this, but if you can't get ANY sign from your phone, it might be hard bricked...
Click to expand...
Click to collapse
Already tried but didnt work.

You sir are a genius!

Mr Colt said:
I was just being too lazy to enter recovery using keys combo I installed an app from the market to boot into recovery.
https://play.google.com/store/apps/...sMSwxLDEsImNvbS50cmFuc2Zvcm1lci5yZWNvdmVyeSJd
Now my phone doesnt start (No screen, Key lights not even download or recovery mode). Doesnt charge too..Any help..??
Rom: Cleanote V5
Kernel: NoteCore V14
Click to expand...
Click to collapse
Did you removed the battery for some minutes?
Sent from my LG-P990 using Tapatalk 2

Did you all read the comments, so many brick there, scary.

jonpaslim said:
Did you all read the comments, so many brick there, scary.
Click to expand...
Click to collapse
Lol if you pay attention the brick threads numbers gets higher on weekends.. It's when the average noob gets some time to flash stuff without reading a single line of warnings and hows to and this its the result...
Enviado desde mi LG-P990 usando Tapatalk 2

msedek said:
Lol if you pay attention the brick threads numbers gets higher on weekends.. It's when the average noob gets some time to flash stuff without reading a single line of warnings and hows to and this its the result...
Enviado desde mi LG-P990 usando Tapatalk 2
Click to expand...
Click to collapse
Consider what happened as an act of laziness. Btw I read that it was for transformer but never thought it can lead to serious hard brick issues. Well tried with a jig it didnt work and also I found out my battery isnt charging through the phone (I used my frnds phone to check ). I just want to try everything before giving it to service center.

Mr Colt said:
Consider what happened as an act of laziness. Btw I read that it was for transformer but never thought it can lead to serious hard brick issues. Well tried with a jig it didnt work and also I found out my battery isnt charging through the phone (I used my frnds phone to check ). I just want to try everything before giving it to service center.
Click to expand...
Click to collapse
I was not talking about you when referred to Noobs hehe
So you can not go recovery with a full charged battery?... I agree if the app only sends commands to go to recovery it should just not work..
But if a jig its not working and neither does a full battery you should send your device for repairs...
Enviado desde mi LG-P990 usando Tapatalk 2

msedek said:
I was not talking about you when referred to Noobs hehe
So you can not go recovery with a full charged battery?... I agree if the app only sends commands to go to recovery it should just not work..
But if a jig its not working and neither does a full battery you should send your device for repairs...
Enviado desde mi LG-P990 usando Tapatalk 2
Click to expand...
Click to collapse
I think that app triggered the emmc bug though I was on notecore. Maybe who knows..Its sunday here so i ll make a visit tomorrow to the service center. Well just dont use that app :angel:

Try the Jig first but if you cant even see anything on screen or When you connect the device to pc, if there is no signal no sound nothing than most probably you super bricked your phone. Then the best way is to send it to the samsung service. If you still have guaranty that is the best option
I also superbricked my galaxy note and send it to service they coulndt undersrtand what happened and they fixed it.

[Q] Help Needed in Unbricking Samsung Galaxy Pop (GT S5570)

Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...

what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick

nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...

yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium

It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....

yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.

tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one

1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin

Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.

dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...

yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung

Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.

chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...

yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center

Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.

yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium

Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....

*NEW* girlfriend's BRICKED Optimus Black. REVIVING METHOD?

Its maybe 4 months since she bricked her OB to death:
>>>no lights when charging
>>>cant boot to recovery or any other boot or S/W upgrade
>>>she cant remember what she exacly did.
###### she told me she installed some cm9 or 10 rom way back then and formatted system ,data,emmc and something like that...
###### its like the EMMC PROBLEM I got on GALAXY NOTE GT N7000 that when you do wipe data on unsafe kernel, you will BRICK your Phone to death <<see death meaning above :thumbup:>>
is there some WorkAround for it?
no warranty because its over...
LG service center is toooo far because its a 10 hour drive to nearest LG service center.... (mainly becuse of Poverty)
and I may have a very gooooooood February 14 if I can bring it to life...
for LOVE of VALENTINE give me hope... :thumbup::beer:
<3 <3 <3
Recognized Distributor™

did u try to flash it with a rooted stock rom with lg smart tool ,, this should work

cant go to s/w upgrade mode..
Recognized Distributor™

any help would be appreciated.. :thumbup::thumbup:
Recognized Distributor™

its March now so you know what happened...
Sent from my GT-N7000 using Tapatalk 2

noteandfound said:
its March now so you know what happened...
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Take it to LG center bud.

noteandfound said:
any help would be appreciated.. :thumbup::thumbup:
Recognized Distributor™
Click to expand...
Click to collapse
have you tried to download LG Mobile Support Tool?
Install it, Open it then remove the battery for a second, put it back long press on VOLUME UP while inserting USB CABLE then on top of that tool look for RECOVERY enter your phone's IMEI and Model press OK and wait.. .

same problem
JastaPein said:
have you tried to download LG Mobile Support Tool?
Install it, Open it then remove the battery for a second, put it back long press on VOLUME UP while inserting USB CABLE then on top of that tool look for RECOVERY enter your phone's IMEI and Model press OK and wait.. .
Click to expand...
Click to collapse
hi i also have the same problem but in my case i can put the phone in s/w upgrade mode and when its in update process already it stop and says restart and when i restart it it says the same again,i try it already for many times but still it says restart,what should i do?

AW: *NEW* girlfriend's BRICKED Optimus Black. REVIVING METHOD?
ginshaker22 said:
hi i also have the same problem but in my case i can put the phone in s/w upgrade mode and when its in update process already it stop and says restart and when i restart it it says the same again,i try it already for many times but still it says restart,what should i do?
Click to expand...
Click to collapse
Use smartflashtool and maybe check your drivers and if you are able to, try it at another pc as well.
Sent from my LG-P970 using xda app-developers app