i have to use mhl on a daily basis with my appradio and have the official samsung mhl cable for the gs3 will the same cable work for the note 2, i assume that it will as long as they continue to use the 11 pin mhl out
Yes, it works. I used a GS3 MHL cable with my Note 2 and it works fine, aside from the overscan issue which seems to be a TV problem.
Related
Hi ,
I wanted to use my galaxy s2 MicroUsb HDMI MHL adapter and OTG USB cable with Galaxy tab "7" with this 30 pin galaxy tab to micro USB adapter.
Any help regarding usb host and hdmi capabilities will be appreciated.
HDMI is supported via Samsung Media Dock. Could have googled for that. There is no listed USB OTG support listed for it, but there is a Keyboard for it, which could be indicative of UDB OTG support, at least of a proprietary nature. Both of these accessories require the standard charging cable to provide power during use.
Sent from my Galaxy Cubed tab using Tapatalk.
I bought Mhl adapter because i was going to buy galaxy note. Then at the last moment i changed my mind and bought galaxy tab 7 t-mobile. My media dock as also arrived. But still waiting for 30 pin con to mic usb adapter and mini hdmi to hdmi adapter. I will let every body know if any thing is discovered.
Sent from my GT-P1000 using Tapatalk
As it stands, HDMI is available through the Dock as mentioned, but there is no USB OTG support. Keyboards can be connected to the 30-pin (Samsung keyboard) or through Bluetooth (third-party keyboards).
There was a project to get USB Host support going, but it seems to have stopped. You can try the OTG gear since there are many variants of Tab and many ROMs etc, but I don't think you'll get anywhere with them since the stock software doesn't seem to support anything apart from the Samsung official accessories.
I am working on getting USB OTG working, but it wont happen anytime soon.
You cant just plug in anything that fits and expect it to work. The Galaxy Tab 10.1 30-pin to USB and 30-pin to SD are for that device.
so in conclusion, it never work?
I was thinking of using OTG + USB to RCA cable rather than HDMI...
I am using GT 7.0 plus
see if someone can answer?
is the OTG P1000 USB working on the plus model?
thks!
Hello,
I want to do some stuff at the same time with my phone.
Watching a movie from an usb stick while charging the phone.
So, I've bought this HDMI converter
When you plug this into the phone you can plug in your charger or USB OTG adapter in the usb port on the HDMI converter.
But i can't find any splitter cable on the internet or ebay so i can charge my phone and connect my usb stick at the same time.
I wonder if this is even possible. It is possible to charge the phone when HDMI converter is connected and it is also possible to connect my USB stick to the HDMI converter.
Anyone ever tried this or has found a simple micro usb splitter cable or normal usb splitter cable?
You can't connect a normal USB Hub because i can't send power back to my phone through the hub.
Thanks :good:
Sorry I can't help with your splitter request.
However I'd be really interested in knowing if those two items work fine with the Note 2?
Sent from my Nexus One using xda app-developers app
so the i know it isnt possible with the 5 pin mhl adapter (the old one thats not compatible with this phone)
I wonder if the 11pn version does allow this. I know the cables dont exist for what you are looking to do, there is a galaxy note smart dock 2 that seems to allow hdmi and 3 usb ports, if they allow it at the same time then it would be at least possible.
it must be. did you try the smart dock?
http://forum.xda-developers.com/showthread.php?t=1953061&page=2
I've ordered one and i will see how it will perform. smart dock is nice but pricey i'd like one for home and work!
Bought this one http://goo.gl/6OiGx and as it is listed compatible with the NOte 2 and the Galaxy S3 i was hoping it would work with the Note 2 as well - nope: only power OR OTG, not both.
cyberfux said:
Bought this one http://goo.gl/6OiGx and as it is listed compatible with the NOte 2 and the Galaxy S3 i was hoping it would work with the Note 2 as well - nope: only power OR OTG, not both.
Click to expand...
Click to collapse
Old thread... at least on my GS3 I have found that the ability to charge and use USB OTG at the same time is kernal specific. Anyone ever find one that works on Note 2?
I brought a MHL to HDMI adapter and I do not get a picture from it with my i9305 LTE
When I connect/disconnect I get a toast message to say HDMI connected/disconnected. and the phone charges.
When I connect a i9300 phone to the HDMI adapter it works OK.
Has anyone else had this problem?
Some early ones (9300) are wired differently and our 9305 will not work
Is there a specific adapter for the i9305 or have they removed the functionality
wstevew said:
Is there a specific adapter for the i9305 or have they removed the functionality
Click to expand...
Click to collapse
11-pin MHL-HDMI Adapter/Dongle
The Samsung Galaxy S III and Galaxy Note II use a connector that is similar to the original 5-pin MHL-HDMI adapter/dongle, but it uses 11-pins in order to achieve a few functional improvements over the 5-pin design.
It supports the use of USB and MHL simultaneously. (Note that the new Samsung 11-pin MHL-HDMI adapter also has a USB On-The-Go port).
Samsung’s Galaxy S III/ Note 2 can power the MHL-HDMI adapter (when used with a non-MHL-compatible-TV). Although this can theoretically also be done with the standard 5-pin micro-USB connector, the Galaxy S III's 11-pin connector is believed to be the first smartphone that supports this functionality.
http://www.mobilefun.co.uk/samsung-galaxy-s3-note-2-mhl-hdtv-adapter-epl-3fhubegstd-p35119.htm
OK so I checked and the model I have is 11 pin
EPL-3FHUBEGSTD
Which is the one you linked too.
Have you checked the USB debugging in advanced settings
I just checked mine today for the first time since I bought it from Amazon about 2 weeks ago. Cost me £9 - works fine. Although sometimes, it does lag a bit.
http://www.amazon.co.uk/gp/product/B00A2OBO6S/ref=oh_details_o01_s00_i00
I have tried with USB debugging on and off. Its usually on for dev purposes.
I spoke to Samsung who suggested I have a faulty MHL.
I have just had another thought though. I am running Nova Launcher, maybe touchwiz is required. I will give it another try tomorrow.
I was right, change back to touchwiz and the HDMI adapter works.
Thanks for the help
Do hdmi works on aosp custom rom?
no Samsung mhl is proprietary the 11 pins make it unique compared to standard mhl ports. as far as I know I have not heard of any aosp rom that has mhl enabled or working
Any luck?
Can anyone recommend a cheap mhl hdmi adapter from eBay?
1)Samsung has a dock station hdmi and usb to patch mice and keyboard for(ex. N7100).
2)Otherwise OTG cable adapter can fit micro usb to HDMI.
I already try the 2nd and im looking for share my cellfhone screen to TV (its not smart tv or support direct wifi). How i can make it work I have Xiaomi Redmi Note 4 (MIUI 8 Global 7.2.16 based android 6.0 MRA58K).
Thanks.
snake000 said:
1)Samsung has a dock station hdmi and usb to patch mice and keyboard for(ex. N7100).
2)Otherwise OTG cable adapter can fit micro usb to HDMI.
I already try the 2nd and im looking for share my cellfhone screen to TV (its not smart tv or support direct wifi). How i can make it work I have Xiaomi Redmi Note 4 (MIUI 8 Global 7.2.16 based android 6.0 MRA58K).
Thanks.
Click to expand...
Click to collapse
There is no other way than Wifi, because Redmi Note 4 doesn't support MHL.
thank you ro reply
What i can do to mirroring or share screen ?
any device to conect my fhone and the device support HDMI out
or any other way to try ?
my TV Sony Bravia it has only Hdmi socket
snake000 said:
thank you ro reply
What i can do to mirroring or share screen ?
any device to conect my fhone and the device support HDMI out
or any other way to try ?
my TV Sony Bravia it has only Hdmi socket
Click to expand...
Click to collapse
Miracast for example.
Hi I'm using chromecast 2 and using it to cast and mirror videos and stuff to my tv. The tv had only one hdmi out. So i purchased a belkin hdmi cable of two metres and an hdmi splitter online. Now i can switch between set top box and chromecast easily without having to switch the cables connecting to the hdmi port each time.
Is there any way to make dualshock 4 work on mi9 without lag or duplicate commands?
Tried Bluetooth auto connect, but it makes no difference
LE: otg usb connection doesn't work at all
apoklyps3 said:
Is there any way to make dualshock 4 work on mi9 without lag or duplicate commands?
Tried Bluetooth auto connect, but it makes no difference
LE: otg usb connection doesn't work at all
Click to expand...
Click to collapse
Magisk module will fix it
I'd rather not root the phone.
will lose wedevine level...
Hey !
For me, using the Dualshock 4 via Bluetooth is impossible, it lags and duplicate commands, but it actually works perfectly via OTG
how?
Plugged it in my MI 9 and nothing happens.
I'm using original MI 9 charger cable and and otg micro usb adapter like this.
no reaction at all.
even tried a usb-c to hdmi hub (has hdmi, USB port and PD). nothing.
apoklyps3 said:
how?
Plugged it in my MI 9 and nothing happens.
I'm using original MI 9 charger cable and and otg micro usb adapter like this.
no reaction at all.
even tried a usb-c to hdmi hub (has hdmi, USB port and PD). nothing.
Click to expand...
Click to collapse
Is the OTG working on other devices?
I'm using a Samsung one (see attachments), it's the one included in the Galaxy S10 box, a friend gave it to me because he had one already, you can find it here
I just plug the controller inside the USB and then plug the OTG in the phone using the Type C
I think you are actually plugging the phone into the controller because the OTG you sent me is a Micro USB one, so you might be plugging your phone into the OTG that you actually plug into the controller
I see but also tried one of these:
RON 26.05 32%OFF | Kebidu Type-C Female Adapter Usb Type-C Hub Adapter 3-in-1 USB C hub to HDMI USB3.0 with Charging Converter
https://s.click.aliexpress.com/e/2dG8IbBa
Which I'm essence is the same as otg using the hub and still nothing
unfortunately xiaomi screwed us again.
although android 10 comes with dualshock 4 support, it's nowhere to be seen in miui11
so here's the deal, both of my Dualshock 4 controllers are v1.
Borowed a V2 from a friend, no lag whatsoever. not sure, but I suspect a driver issue on the phone side with v1
Rooted mi9 ps4 controller
Hello, is it possible to root a Xiaomi mi9 and use ps4 controller?