Hi, I was on HellyBean Rom, opened an account with Net10 BYOP and configured the APN settings, everything seemed to be working fine for a day or so, Then I decided to set a lock pattern on my security settings. after locking the device to try it out, it got stuck, rebooted and got stuck on the boot up animation (dimming on and of), never came out, so I erased everything and re-installed the rom. when i entered the same APN settings i didn´t get the data back, other than that the WiFi and phone seem to be working fine, I upgraded to the lastest HellyBean version, and now switched to the AoCP CP 4 Rom, all with the same results No Data! tried to toggle the airplane mode, verified the imei with the imei behind the battery.
Any ideas what could be causing this?
Thanks.
Try flashing a modem again. If that doesn't fix the problem, dial *#*#2263#*#* and make sure all or the required freq bands are selected.
uhm said:
Try flashing a modem again. If that doesn't fix the problem, dial *#*#2263#*#* and make sure all or the required freq bands are selected.
Click to expand...
Click to collapse
Thanks uhm, i flashed a new modem as suggested, actually thanks for that I got better reception at home, but apparently that dindn´t fix the data network, then i tried to dial *#*#2263#*#* as soon as i dial the las * the whole number dissapears but i dont get any menu.
Any extra help would be appreciated, this is the first time I go into the modem updates/options.
Try flashing a gb stock rom like uckk4 from the master thread and then flash corn kernel tar so that u have cwm recovery too. Then flash the rom you want from cwm recovery menu. You could try data connection in stock rom before flashing another rom.
Related
Ok so I'm running Darky's 7.5 ROM just loaded it and it's flying . i'm having issues connecting to my carrier. I"m from canada and run on a network owned by Sasktel. We get our phones from Bell and our current release is JL2 I think. I was running this ROM fine but wanted to see what all the hype was about .
Now the only problem i'm having is I can't register on my network and thus my phone isn't working as a phone, lol. can someone help me set it up. here are the frequencies we run on.
SaskTel
GSM - N/A
UMTS/HSPA - 850/1900
I went into the APN and set that up so I should have data I just need to get registered. I can see the network Sasktel but it wont let me register. I get the exact message when clicking on it
"Registering on Sasktel......You SIM card does not allow a connection on this network"
any help would be great, thanks
I tried going in here *#2263# but didn't know what to pick so I left it to automatic
I don't know.
When you flash back to official firmware, everything works fine again ?
This may sound funny but try 'sim unlock' your phone.
after flashing, your phone might have reverted back it's original lock which is to BELL.
I agree with the other reply stating for you to have your phone unlocked.
xxgg said:
I don't know.
When you flash back to official firmware, everything works fine again ?
This may sound funny but try 'sim unlock' your phone.
Click to expand...
Click to collapse
I unlocked my phone a while back and it's unlocked still, Network lock = off. and yes flashing to other roms specifically for my phone will work fine on the network. Is this because Darky's ROM is based on a European ROM JPY and i'm supposed to be running a Canadian ROM JL2?
Hi. I have a SGS straight from Sasktel here in SK. I checked my setting under 2263, and it is automatic (top one). After I checked it, it lost cellular connection for about a minute, then eventually came back (phew!).
adamge said:
Hi. I have a SGS straight from Sasktel here in SK. I checked my setting under 2263, and it is automatic (top one). After I checked it, it lost cellular connection for about a minute, then eventually came back (phew!).
Click to expand...
Click to collapse
awesome what happens when you go back into 2263 and click on the wcdma band, which ones are stared in there?I have 2100, 1900 and 900 starred but 850 is not.....Also could you post your APN settings. those are in settings, wireless network, mobile networks, access point names and then click on the inet.stm.sk.ca one and if it's not too much for you could you post them up here along with the wcdma band settings. Thanks bud
can we actually install darkys rom on BELL vibranat i9000M
i would like to find out if darkys Rom works with Bell vibrant thats i9000M from canada ?
well his rom is up and running fine yes, I just have to get the right setting to run on my carrier....I own a i9000m it's a bell phone that my carrier gets supply from. So yes his rom works great on this phone, it's so fast, I might try flashing a modem for the canadian phones and see if that works i'll post back
SOLVED - Sasktel (Bell) running Darky's ROM
So I figured it out, I was running JL2 and then flashed speedmod kernel to get 2e. I then upgraded to Darky's 7.5 ROM, when that came up I was unable to get on the network. I was getting an error "Sim doesn't allow connection on the network" error when looking in providers. anyways, I just flashed the JK3 modem and i'm back on the network with Darky's rom
I grabbed the modem from here.
http://forum.xda-developers.com/showthread.php?t=846237
I used JK3 because they were having issues with JK4 bricking for some reason and didn't want to risk it. now to just get JL2 modem some how
There is a JL2 modem floating around somewhere.
I am also running jk3 modem with xxJPY, love my phone now.
No more bridling issues
BlackDino said:
There is a JL2 modem floating around somewhere.
I am also running jk3 modem with xxJPY, love my phone now.
No more bridling issues
Click to expand...
Click to collapse
Me too, so fast and smooth
If we could get jl2 modem with darkys
Is there a way to get jl2. Modem working with darkys then it would be perfect if u do find it let us know and make a step by step tutorial how it's done from the scratch for newbees canadiens thanks
notoriouspk said:
Is there a way to get jl2. Modem working with darkys then it would be perfect if u do find it let us know and make a step by step tutorial how it's done from the scratch for newbees canadiens thanks
Click to expand...
Click to collapse
It's very simple, TURN OFF ANY/ALL lag fixes!!!!! Back your **** up. then you can begin
You phone should be unlocked but might not have to be.....mine was, you can grab sgs unlocker form the app market also, You have to be running 2e recovery. so check on that first by powering your phone off, wait till it's actually off, froyo vibrates when it's shut down. After it's off, hold volume up, home button and power till you see the i9000m then let it go. it should boot into recovery. If you were running Froyo then you will have a 3e recovery, we need 2e. Also you should check and make sure you can get into download mode, by powering off, volume down, home and power key. If you can't get inot download mode you have to fix that first. if you can proceed:
So grab the recent stable speedmod kernel from hardcore here DON'T get the development version:
http://forum.xda-developers.com/showthread.php?t=822756&highlight=speedmod
depending on how you want to flash grab either the CWM or the other one which needs to be flashed via odin. Flash either or and your phone should boot with 2e. follow the instructions hardcore has posted and make sure you hit the thanks button for him .
After we have 2e installed you can grab Darky's ROM located here:
http://forum.xda-developers.com/showthread.php?t=814091
I used the non wipe one and didn't have issues, make sure you back your **** up before flashing anything. If you notice battery drain after you flash you could flash the wipe version just to make sure. anyways, Follow Darky's instructions to the T and dont forget to thank him
After his ROM boots, I grabbed a modem for our phones (bell, sasktel) I used JK3 because the search wasn't working last night but found this morning a link to JL2....i'm not sure if this is legit JL2 because I haven't used it but give it a shot if it doesn't work flash another on top (I can confirm JK3 works)
JL2: http://forum.xda-developers.com/atta...1&d=1293577837
Grabbed that from a link Samdroid_G_S posted so thank him for that.
JK3: was from docs link located here:
http://forum.xda-developers.com/showthread.php?t=846237&highlight=bell
you can thank him for that. I used JK3 because of the issues JK4 was causing. I wouldn't use JK4 but that' up to you.
again you can use either odin or CWM to flash the modem. once you flash the modem you should be able to register on the network. you might not have internet, so you will need to go in and edit your access point name. Located in your phone here:
Settings | wireless and network | Mobile Networks | access point names
If it is blank click the menu button and New APN, all you need for sasktel's is a name, can be whatever and APN, the APN should be "inet.stm.sk.ca" without the quotes. Leave everything else default and save it. you will have to click the bullet after you created it so it knows to use it. should be good after that. For bell just do a quick google search for bell apn or bell access point name, i'm sure someone has posted on xda also.
I am not responsible if you brick your phone, this is entirely on you if that happens.
Thanks man
That's what I have been looking for . A step by step tutorial how is the rom working for you I will give it a shot . I hope sd card Won't die on me again .I can deal with other problems but what could u do when sd card dies
on u .Thanks!
Hey no problem, by default the voodoo lag fix is disabled but honestly you won't need it.....
Sent from my GT-I9000 using XDA App
Nice, one of the great posts ever on xda. Is there any advantage to running darky's ROM? My SGS on JL2 has been good, and battery life seems awesome now that I turned off automated email checking.
adamge said:
Nice, one of the great posts ever on xda. Is there any advantage to running darky's ROM? My SGS on JL2 has been good, and battery life seems awesome now that I turned off automated email checking.
Click to expand...
Click to collapse
Pretty much preference I guess. I love Darky's ROM but JL2 was good, Darky's seems faster it's built upon 2.2.1 and I read Samsung did some kernel upgrades so that's why it's faster. If you do try it out just make sure you can get into recovery and download mode first.
i can confirm that Darkys rom works, I'm running 7.6 atm. I did notice that the APN settings in my original settings were missing ports numbers for data.
I tried this and it did not work, I still don't have data connection and I am on Bell canada.
Are u still getting text's? If so then you are registered on the network, all you have to do is go into your access point names and create an entry, then highlight it after it's saved. See my post above
Sent from my GT-I9000 using XDA App
Just flashed the new gingerbread rom. Works great but it doenst recognize my sim card or network. I have att tab. Any help to restore it?
Did you remember to download the Modem package too? That's what I'm guessing.
sent from my Galaxy Tab using Cerebral up-link
Did you flash the version with the bootloader? Any whiteline issue on boot?
No I didn't download or flash a modem do I need to? I flashed the one with the bootloader. No whiteline I noticed.
I flashed with bootloader, tried 2 different modems, and no network. wifi works. tried flashing back to stock and everything went crazy. While I was using Odin, I STUPIDLY, plugged in my Captivate to charge without thinking, causing Odin to fail and I got the "phone - ! - PC" Icon.......talked about scared! Ended up using Roto's ATT stock image and Odin to get it back running again,barely. Now I get CRAZY lines when I boot (like if you tweaked the cable to an LCD screen), can't see Recovery screen....total craziness. Still no data. so I flashed back to OverCome Gingerbread ROM following his instructions, still no data
UNTIL
I swapped the SIM card with my phone. I suddenly got data on my Tab, but data would not function on my phone. Seems like the problem follows my SIM. Background: I also had a weird issue before hand where I couldn't open the Market on Cellular data without killing the data connection on Stock Rooted.
Thought I'd share.
EDIT: oh, and I can send text messages without issue.
Go to Settings, Wireless & Network, Mobile Networks, Access Point names and make sure you have one called Broadband (assuming you are on the ATT monthly data only plan)
If you dont, create a new APN and name it Broadband & make the APN Broadband as well. Just leave the other options and save it & select it.
I think by default it comes up with the ATT wap.cingular APN with doesnt work with the Tab Data plan.
RichAP said:
Go to Settings, Wireless & Network, Mobile Networks, Access Point names and make sure you have one called Broadband (assuming you are on the ATT monthly data only plan)
If you dont, create a new APN and name it Broadband & make the APN Broadband as well. Just leave the other options and save it & select it.
I think by default it comes up with the ATT wap.cingular APN with doesnt work with the Tab Data plan.
Click to expand...
Click to collapse
Well Son of B....you rock. What pisses me off is I've screwed up my boot screen (all kinds of colored lines) trying to fix this. Thanks.
Maybe this will help: http://forum.xda-developers.com/showthread.php?t=928076
Sent from my GT-P1000 using XDA Premium App
Gingerbread 2.3.3 installed modem does not work
AT&T monthly pay as you go. What modem.bin do I load? Where can I get it. Is there any additional setup instructions?
Follow my instructions above and flash the JK3 modem fromt this thread.
http://forum.xda-developers.com/showthread.php?t=1069727
Mine keeps saying insert sim card to access. So how do I get it to recognize the sim?
Please anyone with some help? Can I store back to original att froyo and just wait for official upgrade?
Have you guys entered in your APN settings for ATT Broadband?
I am also having a strange radio issue. I am using an ATT Tab with Overcome v2.0 Beta 2 and the JK3 modem. 3G data works great until I try to access the Google Android Market. As soon as I do it drops the 3G connection and wont come back until I reboot it. If I dont go to the market or only go to the market on WiFi it works just fine. I also verified that the same behavior happens with the JPZ modem..
My theory is somehow ATT is blocking Gingerbread Tabs from going to the market using their SIM card. Therefore I think maybe I need to edit my build.prop to spoof them. Can anyone recommend which values should be changed? Can anyone think of anything else that could cause this? Can anyone reproduce this issue on their ATT tab?
swedishcancerboi said:
Well Son of B....you rock. What pisses me off is I've screwed up my boot screen (all kinds of colored lines) trying to fix this. Thanks.
Click to expand...
Click to collapse
You used the bootloader patch app, right?
Reinstall the stock 2.3, then the root, then overcome. Follow the overcome guide, this time put the modem.bin in the phone slot in odin. There is no other fox for the wiggly lines. If you don't reflash everything, you can't get into recovery mode.
i cant get into the network settings as it tells me to insert a sim. I tried to flash the modem as well with no luck.
ok so I turned on my tab to play with it a bit and I had data! It was an H and seemed to work. When I restarted the tab it stopped working and said no sim again.
1) The Gingerbread rom has a modem with it that works fine on AT&T.
2) Did you leave your sim card in while flashing?
i did leave my sim in while flashing. Should I have it out? It seems the tab only recognizes the sim card every so often. Not all the time. Any way to flash the sim recognition part?
Could you please post how you flashed your att tab so I can follow it? Thanks.
Long time lurker, first time poster.
Long story short, a friend gave me an I9305, however, I can't connect to a supported 3G network.
He had toyed around with the device (rooted, installed CM11), then reverted unrooted and reverted to stock firmware. When I got the device, I rooted it with Framaroot, flashed CWM 6.0.4.5, then flashed CM11 and Boeffla kernel. My SIM card was quite old and my carrier told that it doesn't support 3G, so I filed up for a new one. Ok, I got it, however..I'm yet again stuck on EDGE!!!
Tried reflashing CM11, CWM, flashed almost every radio baseband modem from here http://forum.xda-developers.com/showthread.php?t=2010116 to no avail. My IMEI is intact, as well as my Serial Number.
Yes, I read all threads, I tried going to Settings>Wireless&networks> More > Mobile Netwroks >Preffered Network type and checked all options. When I select 3G only, the icon goes to "H", but i can't access the web. After 10-20 seconds, the H icon dissappears and I'm forced to reboot the phone to regain my EDGE data.
At the moment, I'm running the latest Omni ROM nightly. My operator supports all 3G and LTE bands, and I got the correct APNs.
Should I flash a stock ROM and check if this does the job?
I'll greatly appreciate any help, because I'm stuck.
Wipe phone factory reset flash stock rom with modem and csc for your network.
JJEgan said:
Wipe phone factory reset flash stock rom with modem and csc for your network.
Click to expand...
Click to collapse
I can't check my csc code - whenever i type a code in the dialer I get "connection timed out or invalid mmi code". The only ones that work are *#06# and *#*#4636#*#*...
Ok, so I'm running a stock 4.3 rom and STILL have no 3G....tried everything.
Anyone, help?
Maybe if you can try to downgrade to a firmware 4.1.2 via Mobile Odin and then try and access the service mode menu. From there you may be able to enable the 3G/LTE DRX (Radio) which seems to remain a permanent change in the phone once you upgrade again to 4.3.
I have a Note 8 N950U that was originally on ATT. It was bootlooping and I got it to work somewhat by flashing the ATT_N950USQS4CRE1_ODIN firmware using the moded odin file. The phone will boot and all seems to work but it will not work on a cellular network. It shows the "no network connection" error and the airplane mode switch is highlighted as if its on but it is not on. I've tried resetting the network settings, reboot with airplane mode on, etc. I also have tried several different working sim cards and all do the same. The phone does recognize the sim because it sees my phone number in the settings.
I recently reflashed the device using the N950USQS5CRG9 firmware, and still have the same issue. the device boots and all seems to work except the cellular network. I also tried different APN settings as well.
I seem to be having trouble with other firmwares because odin will just error out on me. These are the only 2 firmwares that I was able to get to flash. So is this a firmware issue or a hardware issue? I would really like to get this device to work if at all possible. So, any and all help is greatly appreciated.
TIA to all!!!
[email protected] said:
I have a Note 8 N950U that was originally on ATT. It was bootlooping and I got it to work somewhat by flashing the ATT_N950USQS4CRE1_ODIN firmware using the moded odin file. The phone will boot and all seems to work but it will not work on a cellular network. It shows the "no network connection" error and the airplane mode switch is highlighted as if its on but it is not on. I've tried resetting the network settings, reboot with airplane mode on, etc. I also have tried several different working sim cards and all do the same. The phone does recognize the sim because it sees my phone number in the settings.
I recently reflashed the device using the N950USQS5CRG9 firmware, and still have the same issue. the device boots and all seems to work except the cellular network. I also tried different APN settings as well.
I seem to be having trouble with other firmwares because odin will just error out on me. These are the only 2 firmwares that I was able to get to flash. So is this a firmware issue or a hardware issue? I would really like to get this device to work if at all possible. So, any and all help is greatly appreciated.
TIA to all!!!
Click to expand...
Click to collapse
What version of the bootloader are you currently on now? And did you flash a CSC file from AT&T and then do a factory reset in recovery mode?
MrMike2182 said:
What version of the bootloader are you currently on now? And did you flash a CSC file from AT&T and then do a factory reset in recovery mode?
Click to expand...
Click to collapse
I am currently on N950USQS5CRG9 bootloader. And yes, i flashed this CSC file, CSC_OYN_N950UOYN5CRG9_CL13949550_QB19107689_REV00_user_low_ship_MULTI_CERT, which I believe is an ATT file. I did not do a factory reset in recovery mode after the firmware flashing. The device was factory restored prior to flashing though. THanks for the help, I've been messing with this for a week now...Thanks again.
[email protected] said:
I am currently on N950USQS5CRG9 bootloader. And yes, i flashed this CSC file, CSC_OYN_N950UOYN4CRE1_CL13303302_QB17993108_REV00_user_low_ship_MULTI_CERT, which I believe is an ATT file. I did not do a factory reset in recovery mode after the firmware flashing. The device was factory restored prior to flashing though. THanks for the help, I've been messing with this for a week now...Thanks again.
Click to expand...
Click to collapse
Try going from CRG9 to N950USQU5CRIA because that could fix the problems.. Download the update.zip from the website put it on your SD card and then boot into recovery mode and select flash update from SD card and let it do its thing after you select the update file.. You have CRG9 still and you'll be able to flash back to it too if you have to for some reason.. The website is here put your model of phone in from the dropdown menu(Note 8) and then the next dropdown menu select your CRG9 firmware and it will give you some updates but take the latest version that's N950USQU5CRIA not the old ones after it flashes try a factory reset again!! Link https://samsung.firmware.science
MrMike2182 said:
Try going from CRG9 to N950USQU5CRIA because that could fix the problems.. Download the update.zip from the website put it on your SD card and then boot into recovery mode and select flash update from SD card and let it do its thing after you select the update file.. You have CRG9 still and you'll be able to flash back to it too if you have to for some reason.. The website is here put your model of phone in from the dropdown menu(Note 8) and then the next dropdown menu select your CRG9 firmware and it will give you some updates but take the latest version that's N950USQU5CRIA not the old ones after it flashes try a factory reset again!! Link https://samsung.firmware.science
Click to expand...
Click to collapse
OK, went through and did exactly what you said do...the update went through and finished, the phone rebooted, and then I restarted phone and did factory reset, and I went thru the setup and the update did take, but still same issue. Tried 2 different sim cards that work in other devices and still no network connection and airplane mode is still highlighted as if its on. No signal bars just a 0 with a / slash through it.
Any other ideas? Really do appreciate the help. TIA!!
[email protected] said:
OK, went through and did exactly what you said do...the update went through and finished, the phone rebooted, and then I restarted phone and did factory reset, and I went thru the setup and the update did take, but still same issue. Tried 2 different sim cards that work in other devices and still no network connection and airplane mode is still highlighted as if its on. No signal bars just a 0 with a / slash through it.
Any other ideas? Really do appreciate the help. TIA!!
Click to expand...
Click to collapse
Try this.. From the home screen, tap the settings icon, scroll down until you see General and select it, scroll down until you see the reset option. Select reset. You will be taken to the reset screen. Select Reset Network Settings, if your phone is password protected, enter your code. You will be taken to a new screen confirming your selection.
And the last idea I have is that you have a hardware issue if the above didn't work and there's something broken internally and you need to go to AT&T immediately and have them either replace that phone or call Samsung because there is a 1 year warranty on the phone for free from Samsung and they'll fix it and return it so long as it's not from something you caused, like water or dropping it and breaking it.. Also, where did you get that phone from? Is the IMEI clear?
MrMike2182 said:
Try this.. From the home screen, tap the settings icon, scroll down until you see General and select it, scroll down until you see the reset option. Select reset. You will be taken to the reset screen. Select Reset Network Settings, if your phone is password protected, enter your code. You will be taken to a new screen confirming your selection.
And the last idea I have is that you have a hardware issue if the above didn't work and there's something broken internally and you need to go to AT&T immediately and have them either replace that phone or call Samsung because there is a 1 year warranty on the phone for free from Samsung and they'll fix it and return it so long as it's not from something you caused, like water or dropping it and breaking it.. Also, where did you get that phone from? Is the IMEI clear?
Click to expand...
Click to collapse
That's one of the 1st thing i've tried before anything else. It says it resets successfully, but does not fix issue.
Unfortunately, I got this second hand...It worked great until it started boot looping, so returning it, isn't an option. I guess the baseband chip
got messed up some how. Anyways, thanks a million for the help...it was much appreciated.
Hi guys, I'm in real mess here !
I tried rooting my phone using the magisk patch method, everything went as planned except I forgot to uncheck the "Auto reboot" mark in odin.
so after flashing the patched firmware my phone went on bootloop.
I did later reflash it properly and everything works fine including root, Except it's always on "Emergency calls only"
My SIM card works fine, I can use WIFI, I can read IMEI everything looks just fine but I can't register to network.
I've tried reflashing stock firmware, another firmware, wipe cache wipe data,.... nothing works.
I desperately need help guys if anyone has any idea!
Try another SIM card if working. Also check the APN settings of your mobile network. You may have to manually enter the correct APN settings.
Hi Guys,I have the same problem in my rooted sumsung j7 prime. Someone kindly assist
XTrail02 said:
Try another SIM card if working. Also check the APN settings of your mobile network. You may have to manually enter the correct APN settings.
Click to expand...
Click to collapse
Hey