HELP Phone can't register to network after root - Samsung Galaxy S10 Questions & Answers

Hi guys, I'm in real mess here !
I tried rooting my phone using the magisk patch method, everything went as planned except I forgot to uncheck the "Auto reboot" mark in odin.
so after flashing the patched firmware my phone went on bootloop.
I did later reflash it properly and everything works fine including root, Except it's always on "Emergency calls only"
My SIM card works fine, I can use WIFI, I can read IMEI everything looks just fine but I can't register to network.
I've tried reflashing stock firmware, another firmware, wipe cache wipe data,.... nothing works.
I desperately need help guys if anyone has any idea!

Try another SIM card if working. Also check the APN settings of your mobile network. You may have to manually enter the correct APN settings.

Hi Guys,I have the same problem in my rooted sumsung j7 prime. Someone kindly assist

XTrail02 said:
Try another SIM card if working. Also check the APN settings of your mobile network. You may have to manually enter the correct APN settings.
Click to expand...
Click to collapse
Hey

Related

[Q] Sudden Data Loss on JB Captivate

Hi, I was on HellyBean Rom, opened an account with Net10 BYOP and configured the APN settings, everything seemed to be working fine for a day or so, Then I decided to set a lock pattern on my security settings. after locking the device to try it out, it got stuck, rebooted and got stuck on the boot up animation (dimming on and of), never came out, so I erased everything and re-installed the rom. when i entered the same APN settings i didn´t get the data back, other than that the WiFi and phone seem to be working fine, I upgraded to the lastest HellyBean version, and now switched to the AoCP CP 4 Rom, all with the same results No Data! tried to toggle the airplane mode, verified the imei with the imei behind the battery.
Any ideas what could be causing this?
Thanks.
Try flashing a modem again. If that doesn't fix the problem, dial *#*#2263#*#* and make sure all or the required freq bands are selected.
uhm said:
Try flashing a modem again. If that doesn't fix the problem, dial *#*#2263#*#* and make sure all or the required freq bands are selected.
Click to expand...
Click to collapse
Thanks uhm, i flashed a new modem as suggested, actually thanks for that I got better reception at home, but apparently that dindn´t fix the data network, then i tried to dial *#*#2263#*#* as soon as i dial the las * the whole number dissapears but i dont get any menu.
Any extra help would be appreciated, this is the first time I go into the modem updates/options.
Try flashing a gb stock rom like uckk4 from the master thread and then flash corn kernel tar so that u have cwm recovery too. Then flash the rom you want from cwm recovery menu. You could try data connection in stock rom before flashing another rom.

[Q] S i9000 unable to connect to network

Hi, I'm hoping you can help. Total noob so please bear with me.
I got a Si9000, it says it is unlocked.
When putting in sim card I got data network not available error.
Installed S1_Odin_20100512.pit
In PDA option I put in code_i9000XXJVS_CL565837_REV03_USER_LOW_SHIP.tar
For phone option I put in modem_i9000XXJVS_REV_00_CL1059471.tar
For CSC option I put in GT-i9000-CSC-MULTI-OXAJVS.tar
After I was told to type in *2767*3855# to reset phone.
Phone has been updated to 2.3.5, but now getting not able to connect to network error. It says mobile network unavailable. Any Ideas?
Thanks
have you checked that you have the correct settings for the network you want to use and also check that you have a valid IMEI number
slow--welder59 said:
have you checked that you have the correct settings for the network you want to use and also check that you have a valid IMEI number
Click to expand...
Click to collapse
Thanks for replying
Yes, the phone is shows the network, but when you try to select it, it says unable to connect.
I just checked there, and the IMEI number is valid
The files are in the right place, so nothing wrong there. Is wifi working?
snapper.fishes said:
The files are in the right place, so nothing wrong there. Is wifi working?
Click to expand...
Click to collapse
Yep, but wifi is the only thing thats working. No data or mobile network, no GPRS either
Which network are you with and what settings do you have in APN ?
Would recommend ...flashing Rom and Re-Rooting*
I am wondering if it's just something in the connection settings. When I went to Japan last year I had to fiddle with something in the settings before I could pick up signals. It was in mobile networks. I think you can select cdma or something like that.
Sent from my Nexus 4 using Tapatalk 2
EwOkie said:
Which network are you with and what settings do you have in APN ?
Would recommend ...flashing Rom and Re-Rooting*
Click to expand...
Click to collapse
Im with Go Conquer in Ireland, actually brought the phone to a shop to be unlocked, as it was Vodafone, but they said it already was unlocked. They have their settings up on their website so I have entered them.
I'm going to try putting it back to its original settings again, and rooting it again, do you think that might be it? Ill also try the cdma settings.
Thanks to you both
Follow my Guide below to flash Rom and then Root it
Why did you go to a shop to unlocked it ...theres apps on here free??
Did you manage to get it right again? I'm having the same issue as you do. I did a factory reset with cwm and now when I enter the sim card it doesnt connect to network or 3g. Wifi does work. I am on original rom 2.3.5 and I dont know what to do. I tried a other sim and that didnt work either. Please advice. Thank you.
happybeat said:
Did you manage to get it right again? I'm having the same issue as you do. I did a factory reset with cwm and now when I enter the sim card it doesnt connect to network or 3g. Wifi does work. I am on original rom 2.3.5 and I dont know what to do. I tried a other sim and that didnt work either. Please advice. Thank you.
Click to expand...
Click to collapse
Try to flash in odin without sim and put it later when it boots
Sent from my GT-I9000 using XDA Premium 4 mobile app
happybeat said:
Did you manage to get it right again? I'm having the same issue as you do. I did a factory reset with cwm and now when I enter the sim card it doesnt connect to network or 3g. Wifi does work. I am on original rom 2.3.5 and I dont know what to do. I tried a other sim and that didnt work either. Please advice. Thank you.
Click to expand...
Click to collapse
Are you sure to have flashed ROM with proper CSC bandwidth for the region where you live?
Hi,
Thank you all for replying! For some unknown reason the phone works. I left it a day off and then I powered it up again and it worked. So I dont know how but thank you guys for replying!
Grtz,
Happybeat

Unable to open Mobile Network Setting the Process.com.android.phone Has Stopped

Unable to open network setings .
I have D950. Rooted. NO custom rom installed.
I am based in India.
I had modified the settings inorder to get the tethering work.
Since then i am not able to access mobile network settings
Please restore your factory settings with the sim inserted.
Nithin Abraham said:
Please restore your factory settings with the sim inserted.
Click to expand...
Click to collapse
No It did not work
I have tried Multiple time factory reset and Back up . But still the same issue

T Mobile data does not work whatever I do

Hello guys/girls,
I just got my Nexus 6 yesterday from Amazon and bought a new nano sim instead of my micro.
I immediately did a bootlocker unlock, root and twrp install and flashed chroma rom.
Everything went smooth the only problem is my data does not work.
I tried Catalyzm rom, I tried factory image from 5.11 up to 6.0.x, same issue!
I tried to flash different basebands, also APN reset/settings.
It says 'T mobile on top and it seems to be recognized.
Model is Xt1103 and currently on factory.
I'm out of ideas, anyone can help before I shoot this phone back to Amazon?
Bbaghi said:
Hello guys/girls,
I just got my Nexus 6 yesterday from Amazon and bought a new nano sim instead of my micro.
I immediately did a bootlocker unlock, root and twrp install and flashed chroma rom.
Everything went smooth the only problem is my data does not work.
I tried Catalyzm rom, I tried factory image from 5.11 up to 6.0.x, same issue!
I tried to flash different basebands, also APN reset/settings.
It says 'T mobile on top and it seems to be recognized.
Model is Xt1103 and currently on factory.
I'm out of ideas, anyone can help before I shoot this phone back to Amazon?
Click to expand...
Click to collapse
Seems to me you have a data connection, but no access to internet. Big change it has to do with settings. Does your wifi-internet work?
or ..... Your new sim card ! Does your provider something that blocks internet?
Yes, Wifi works like everything else. I get the message 'Sign into the T-mobile', once i click on it, it takes me to u.web2go.com with message: 'Your data plan does not work on this device' lol. My data has worked with any other phone.. Messing with APN has brought me to LTE but that !!!!! mark is still there.
Bbaghi said:
Yes, Wifi works like everything else. I get the message 'Sign into the T-mobile', once i click on it, it takes me to u.web2go.com with message: 'Your data plan does not work on this device' lol. My data has worked with any other phone.. Messing with APN has brought me to LTE but that !!!!! mark is still there.
Click to expand...
Click to collapse
Sounds like a plan issue. Call T-Mobile and see what they have to say about it.
APNs would only help you to get a connection. If their servers aren't allowing you to access the internet (what it sounds like) you won't be able to do anything from your end to bypass that.
Just an update. I went to T-Mobile they switch my SIM and it worked. bleh. Happy I can keep this phone /closed
just and update went to T-mobile got a sim switch and it worked. /closed

No Service/Signal with Android Pie

So I bought my XZ1C in the US, flashed Pie (tried SG, TH, FR) with newflasher/flashtool, since the official US Pie is not out yet, all files except Simlock.ta. All the firmwares showed full signal some time (3~5 minutes, give or take) after boot on, but none of them were able to have data access, and phone calls cannot be made. Xperia Companion doesn't fix anything. Rebooting doesn't fix anything. Same if I take out my sim and replug in, same if I choose WCDMA/GSM or GSM only, same if I reset network settings, and same if I flash the baseband files + OEM.ta from US 47.1.A.16.20. When I go in to the testing (*#*#4636#*#* if I recall correctly), all numbers are 0, indicating no issues with the sim card itself. IMEI is showing up correctly, and the phone even recognizes my carrier. If I rollback to Oreo, everything just works fine, whether it's US, HK, FR, DE, or whatever. It's been really depressing, and I appreciate if anyone could help me out with what is happening here. BTW, my carrier is CTExcel, based on T-Mobile in the US. Thanks.
Does you've try a factory reset after upgrade to Pie?
I
Aki-Zakura said:
I appreciate if anyone could help me out with what is happening here. BTW, my carrier is CTExcel, based on T-Mobile in the US. Thanks.
Click to expand...
Click to collapse
Have you checked the APN settings? maybe your vesrion is failing to download the correct settings.
Look up what they should be for CTExcel, then apply them manually.
mad0701 said:
Does you've try a factory reset after upgrade to Pie?
I
Click to expand...
Click to collapse
Well, I don't think that's necessary cuz I flashed everything using newflasher/flashtool, including reset.
Didgesteve said:
Have you checked the APN settings? maybe your vesrion is failing to download the correct settings.
Look up what they should be for ... , then apply them manually.
Click to expand...
Click to collapse
I'll give it a shot, but I doubt it's because of that. My carrier never required APN settings on iOS or Android Oreo; all it has in APN is something called "alpha" on my iPhone 5s.
I haven't the problem at all. which are reported.... OK... first at all, I have received a loop of reboot during the Sony logo.. After that I press power and Volume up for a few seconds... the phone vibrate some times (normally its means factory reset). After that it was started and I'm at the beginning...
Didgesteve said:
Have you checked the APN settings? maybe your vesrion is failing to download the correct settings.
Look up what they should be for ... , then apply them manually.
Click to expand...
Click to collapse
Ok, I used my home-country SIM card, and enabled roaming, it worked, with AT&T network connected. Changing the APN to my US carrier's didn't solve the problem, however, so I suppose I shall just contact my carrier then. Thanks, bro.

Categories

Resources