Hi all!
I cannot post replies in Development forums, so decided to create new thread here.
I'm using CM10 from kallt_kaffe starting from first build. I like it's speed and don't want to move back to ICS (cm9 or official).
Had no problems before.... before 3.1 kernel.
With new builds I have very strange bugs: to enable WiFi I have to reboot my tablet 10 times in a row. Sometimes more.
And noticed that I'm not the only one that have this problem.
I tried different CWM, bootloaders, builds (3g or wifi only), factory reset, format /system, install official honeycomb then CM10, even install official ICS for 7310 with it's bootloader (from ODIN) then CM10. No luck. Same bugs.
Also (very often) I see black screen instead of CM logo while boot. Right after "Samsung galaxy tab 8.9" logo. And have to reboot tablet.
Does anyone knows, how to solve this?
logcat (with removed garbage) and dmesg output are attached.
Thanks a lot!
Messages from logcat:
D/WifiService( 319): setWifiEnabled: true pid=394, uid=10037
.......
E/WifiStateMachine( 319): Failed to load driver!
E/WifiStateMachine( 319): DriverFailedState
Messages from dmesg:
<6>[ 193.339640] [TSP] R [ 0]## wifi_probe
<4>[ 193.404477] wifi_set_power = 1
<6>[ 193.404648] p3_wifi_power: start
<4>[ 193.720922] wifi_set_carddetect = 1
<6>[ 193.721865] p3_wifi_set_carddetect: start
<6>[ 194.968463] [ wm8994_samsung.c (wm8994_shutdown,1676) ] Stream_state = [0x1], Codec State = [0x1]
<6>[ 194.969454] [ wm8994_samsung.c (wm8994_shutdown,1709) ] Turn off Codec!!
<6>[ 194.970132] Board P5 : Enterring wm8994_set_mic_bias on=0
<4>[ 194.971172] setclr gpio 15 at reg add 13
<7>[ 194.971868] stmpe1801_write_reg wr:0x13 0x0(c:4)
<3>[ 195.600026] init: untracked pid 1198 exited
<4>[ 195.720835]
<4>[ 195.720849] failed to power up wifi chip, retry again (11 left) **
<4>[ 195.720874]
<4>[ 195.725572] ## wifi_remove
<4>[ 195.726269] wifi_set_power = 0
<6>[ 195.726952] p3_wifi_power: start
<4>[ 195.930854] wifi_set_carddetect = 0
<6>[ 195.931845] p3_wifi_set_carddetect: start
<4>[ 195.942052] ## wifi_probe
<4>[ 195.942737] wifi_set_power = 1
<6>[ 195.943787] p3_wifi_power: start
<4>[ 196.250852] wifi_set_carddetect = 1
<6>[ 196.251548] p3_wifi_set_carddetect: start
<4>[ 198.250868]
<4>[ 198.250883] failed to power up wifi chip, retry again (10 left) **
Hey,
I got same problem and made new data factory reset and so on ... Ok, now i got it: with the last update from 21.october ... wipe & data factory reset too and format sytem ... I reinstall last cm10mbuild from 21. October
smoschi said:
Hey,
I got same problem and made new data factory reset and so on ... Ok, now i got it: with the last update from 21.october ... wipe & data factory reset too and format sytem ... I reinstall last cm10mbuild from 21. October
Click to expand...
Click to collapse
I've made countless wipes, resets, reinstalls. Even flashed P7310-EULA firmware via ODIN. And different CM10 builds.
Useless.
But it's not something with hardware, as WiFi works like a charm in ICS, HC and CM10 2.6 kernel.
Also when WiFi starts in lastest CM10, it works just fine until next reboot. And it's working fine after long sleep.
i installed cm10 25. october build for my 8.9. Everything works fine but can't use wifi. wifi is on and it connects to the internet but no downloading or uploading. Also when i plug my tablet to PC just nothing happens. I cant even change my rom with another one bc of these problems.
Any idea?
noicant said:
I cant even change my rom with another one bc of these problems.
Click to expand...
Click to collapse
There are at least 3 ways to do this but they require a PC or a machine to write to USB/SD:
1) Use adb from the sdk to push your new ROM to the device over USB and then flash it; or
2) Use a USB drive or SD card if you have an adapter; or
3) Use ODIN to flash another (probably Stock) ROM onto the device (choice of last resort).
That said, there is probably a simple configuration issue since you say you are actually connected.
Is there anything of interest in the logcat or dmesg?
noicant said:
i installed cm10 25. october build for my 8.9. Everything works fine but can't use wifi. wifi is on and it connects to the internet but no downloading or uploading. Also when i plug my tablet to PC just nothing happens. I cant even change my rom with another one bc of these problems.
Any idea?
Click to expand...
Click to collapse
Go to Settings -> Storage -> (use menu "USB computer connection" at top right corner) -> check "Media device (MTP)"
that will give you access to tablet from PC
yoyurik said:
Go to Settings -> Storage -> (use menu "USB computer connection" at top right corner) -> check "Media device (MTP)"
that will give you access to tablet from PC
Click to expand...
Click to collapse
Thank you, it worked.
Btw now i am using cyanogen mod 10 with wifi. I changed my cwm version and used 6.0.1.0 and made a full wipe and also wiped dalvik cache and intalled cm 10 again. Now it works perfect.
incoming/outgoing call
noicant said:
Thank you, it worked.
Btw now i am using cyanogen mod 10 with wifi. I changed my cwm version and used 6.0.1.0 and made a full wipe and also wiped dalvik cache and intalled cm 10 again. Now it works perfect.
Click to expand...
Click to collapse
mine is more of the voice calls.anybody knows how to fix?
---------- Post added at 09:18 PM ---------- Previous post was at 09:09 PM ----------
yoyurik said:
I've made countless wipes, resets, reinstalls. Even flashed P7310-EULA firmware via ODIN. And different CM10 builds.
Useless.
But it's not something with hardware, as WiFi works like a charm in ICS, HC and CM10 2.6 kernel.
Also when WiFi starts in lastest CM10, it works just fine until next reboot. And it's working fine after long sleep.
Click to expand...
Click to collapse
i install cm 9 ver 30/10 then upgrade cm 10 30/10 and almost perfect except incoming calls. your's working?
antonvon said:
mine is more of the voice calls.anybody knows how to fix?
---------- Post added at 09:18 PM ---------- Previous post was at 09:09 PM ----------
i install cm 9 ver 30/10 then upgrade cm 10 30/10 and almost perfect except incoming calls. your's working?
Click to expand...
Click to collapse
Incoming calls are not working yet on CM10. And it doesnt depend on your luck.
I think it's because kallt_kaffe have p7310. and now he don't really care about voice calls on p7300
yoyurik said:
I think it's because kallt_kaffe have p7310. and now he don't really care about voice calls on p7300
Click to expand...
Click to collapse
I think asking him how you can help fix it, rather than making uninformed statements like this, would be a better way to approach the problem.
actually i don't know why people want activate the voice call on a (BIG) tab
now , i'm on the new build (10/30) and the wifi problem is gone
chriscsh said:
actually i don't know why people want activate the voice call on a (BIG) tab
now , i'm on the new build (10/30) and the wifi problem is gone
Click to expand...
Click to collapse
WiFi works after shutdown and reboots?
Mine is working better on latest build, but still loosing wifi after shutdown (have to reboot countless time before if works again)
boscorama said:
I think asking him how you can help fix it, rather than making uninformed statements like this, would be a better way to approach the problem.
Click to expand...
Click to collapse
Don't get me wront. I do not think he don't care (or he dont want to), I meant he do not have enough time to play with voice calls on p7300. I know he is very busy now.
BTW: I was trying to contact him via private messages, but no response.
chriscsh said:
actually i don't know why people want activate the voice call on a (BIG) tab
now , i'm on the new build (10/30) and the wifi problem is gone
Click to expand...
Click to collapse
Because can't get 8hr sleep when something is missing with my phone while other ROM have it. I prefer JB but can't stay on it without the voice service.It's just a matter of time with KK. I know he knew
Hi guys, I seem to have this problem. I have a 7310 model 8.9 and I have the CWM 6.0.0.8 alternate because the other version simply rolled on my screen.
I have tried the CM10 30th October nightly (and a few others) and done a factory reset, wiped cache + dalvik and formatted /system before the installation of the ZIP.
The performance is extremely laggy and wifi does not turn on. I assume there is a lot of activity trying to turn wifi on causing the lag.
How can I help myself or help you help me? I'd love CM10 on this thing and have had much joy with other devices (Blade, Nexus S).
Thanks!
kb88111 said:
Hi guys, I seem to have this problem. I have a 7310 model 8.9 and I have the CWM 6.0.0.8 alternate because the other version simply rolled on my screen.
I have tried the CM10 30th October nightly (and a few others) and done a factory reset, wiped cache + dalvik and formatted /system before the installation of the ZIP.
The performance is extremely laggy and wifi does not turn on. I assume there is a lot of activity trying to turn wifi on causing the lag.
How can I help myself or help you help me? I'd love CM10 on this thing and have had much joy with other devices (Blade, Nexus S).
Thanks!
Click to expand...
Click to collapse
Best experienced so far was from cm 9 then went cm 10.all is well.hope it helps
antonvon said:
Best experienced so far was from cm 9 then went cm 10.all is well.hope it helps
Click to expand...
Click to collapse
thanks- tried CM9, same lethargic experience.
Now to get from Honeycomb to ICS, I went the P7310UELA3 before taking the P7310UELPB images - all done with ODIN. No repartitioning as per the instructions.
Boot and response when booted in both CM9 and CM10 are terrible.
Is it worth using Kies to go back to UELA3 and then CWM to go CM9 or CM10?
yoyurik said:
WiFi works after shutdown and reboots?
Mine is working better on latest build, but still loosing wifi after shutdown (have to reboot countless time before if works again)
Click to expand...
Click to collapse
Wi-fi still have problem on sometime not work after reboot
P7310
I too have the issue where my wifi never turns on. I have tried turning off and on several times with no luck. I have tried updating the bootloader and flashing every kernel and recovery I could find. Has anyone came up why this is?
Related
When I try to enable Bluetooth, buttons becomes gray for a 5-10 seconds, appears message about switching on, and then - checkbox becomes unchecked.
In log:
Code:
ERROR/bluedroid(130): bt_enable: Timeout waiting for HCI device to come up
DEBUG/BluetoothService(130): Bluetooth state 11 -> 10
I have T-Mobile G1, I tried:
- Caynogen 6.0
- XTream Froyo 1.9.5
It looks like:
same here ! Who can answer ?
I also found this (http://androidcommunity.com/forums/f7/g1-bluetooth-will-not-turn-on-29197/) but im cyanogenmod 6.0.2 on Vendor Bravo .I Switched like 5 differents ROMs and always the same problem . I think we really have faulty bluetooth now
Must BT-module return any debug information ? Can I check it by software way ? Or really it can be completely dead ?
same issue
soar said:
Must BT-module return any debug information ? Can I check it by software way ? Or really it can be completely dead ?
Click to expand...
Click to collapse
same issue. after miui 28 update, cant enable bluetooth. tried restore everything, with nandroid, install format new roms etc...
i have this same problem with my x10, i have updated the baseband and have tried many custom roms with no success... my bluetooth hasnt worked since the stock 2.1 upgrade from SE and i really want it back... i dont know if anyone else is having this problem but i thought i would post here first and see if anything comes up... thanks
After installtion of ROM (without installing other APPS for ROM) mobile network was working fine and I was able to make/receive calls. I used it for couple of hrs, the only thing I noticed that I was not able to turn the WIFI on I thought this could be because of other apps so I installed other apps. Immediately after installing other apps network is gone even if I try to search network manually it says "Error while serching network" and still I can not turn my WIFI on. Any one else having same problem?
I reinstalled ROM to check this and again same problem. No network & No WIFI.
About wifi, it's said in the first post that it only works with static ip, although there's a fix for that, so i used it and my wifi is excellent now.
About the network, i really can't help you but mine is fine...Have you tried to wipe data before installing the rom again?
This ROM need nAa11 kernel to work ot of the box! Why you need alf's kernel?
Vicky26 said:
Have you tried to wipe data before installing the rom again?
Click to expand...
Click to collapse
Yes I did. Regarding WIFI, my problem is that I can not switch on the WIFI thus unable to fix wifi solution
didkoslawow said:
This ROM need nAa11 kernel to work ot of the box! Why you need alf's kernel?
Click to expand...
Click to collapse
Yes I know.... but in developer's thread I found many people are using alfs without any problem so used this one. Just now I tried flashing nAa11 trough 1st post but unfortunately flash tool is not showing this file in available kernel list??????
problem solved with nAa 11 and reinstallation without wipe
i have somting wearid with my phone
i have flash the latest version from CM9 (CM9 Alpha 5) and the WIFI still dos't work with me, i can see the WIFI name and select it, and insert the password, but when i select connect, it is not connect and nothing happen, in addition i have make clean install,with format the system and wipe data .... etc, any help please!!!!
regards
Khader Ibrahim said:
i have somting wearid with my phone
i have flash the latest version from CM9 (CM9 Alpha 5) and the WIFI still dos't work with me, i can see the WIFI name and select it, and insert the password, but when i select connect, it is not connect and nothing happen, in addition i have make clean install,with format the system and wipe data .... etc, any help please!!!!
regards
Click to expand...
Click to collapse
Same problem here. pretty weird :/
Wifi Problem
Are you suer you are in a good distance of wi-fi singal? Because sometimes it happens to me too... you see the wifi, so you click to connect and when you enter password a click connect, it disappers, becasue you are too far away from the wi-fi....
solcmartas said:
Are you suer you are in a good distance of wi-fi singal? Because sometimes it happens to me too... you see the wifi, so you click to connect and when you enter password a click connect, it disappers, becasue you are too far away from the wi-fi....
Click to expand...
Click to collapse
Yes, when i am trying to connect, i am at 2 meters of AP, the name of ESSID and passwords are correct ( verified with the connection info of the laptop).
thank you for reply!!
parrott cangrsi
solcmartas said:
Are you suer you are in a good distance of wi-fi singal? Because sometimes it happens to me too... you see the wifi, so you click to connect and when you enter password a click connect, it disappers, becasue you are too far away from the wi-fi....
Click to expand...
Click to collapse
yes i'm sure, and the distance between me and the WiFi router is 3 cm
any help please
regards
I tried many (4 or maybe 5) differents versions of ROMS with ICS, and no version is capable to connect .
I reflashed a ROM with version 2.3.6 and this it's running fine, this night (GMT +1) i will try to change the WiFi security preferences for test in a diferent environment, i will tell later
nvillier leprye
crackiron said:
I tried many (4 or maybe 5) differents versions of ROMS with ICS, and no version is capable to connect .
I reflashed a ROM with version 2.3.6 and this it's running fine, this night (GMT +1) i will try to change the WiFi security preferences for test in a diferent environment, i will tell later
Click to expand...
Click to collapse
same here i have tried many baseband roms and no roms is capable to connect .
and im waiting ;D.
hope that we can find solution.
my case is even stranger: i had cm9 alpha 4 and everything (apart camera and radio) worked like a charm, even wifi
then i tried the 'update' to fix the camera and camera worked but now that i'm back home (i was on a vacation when i modded the phone) i've noticed the wifi doesnt work no more.. now trying alpha 5
edit: everything works like a charm now : alpha 5 + update for camera.. remains radio and tethering to fix GO DEVS
edit 2: i'm having a hard time installing the gapps o.o i'm going to try again wiping once again everything
Edit 3: doesn't work.. i tried going back TO alpha 4 and again gapps don't work.. I tried downloading them again and nothing changed.. should I go back to 2.3.6 and wait????
drifter94 said:
my case is even stranger: i had cm9 alpha 4 and everything (apart camera and radio) worked like a charm, even wifi
then i tried the 'update' to fix the camera and camera worked but now that i'm back home (i was on a vacation when i modded the phone) i've noticed the wifi doesnt work no more.. now trying alpha 5
edit: everything works like a charm now : alpha 5 + update for camera.. remains radio and tethering to fix GO DEVS
edit 2: i'm having a hard time installing the gapps o.o i'm going to try again wiping once again everything
Edit 3: doesn't work.. i tried going back TO alpha 4 and again gapps don't work.. I tried downloading them again and nothing changed.. should I go back to 2.3.6 and wait????
Click to expand...
Click to collapse
Oh 0_o .... and now what you are going to do ??
Running CM9 Alpha 5 and i've changed the configuration of WIFI security... doesn't work.
I discard a problem with wpa_supplicant, someone knows where logs are located? i am reviewing the dsmeg output and... not seems to have any interesting information ... i will review carefully
PD: iwlist scan also doesn't work
good luck!!
Hello everyone,
I flashed CM 10.1.2 with build-date 2013 Jul 11 and I can't activate my WiFi anymore.
Bluetooth is ok, but I can't disable NFC - same as WiFi.
I push the button and it's "working" to activate wifi or deactivate nfc - but nothing happens. [edit: nfc working after reboot]
I've got not many ideas what I can do. Everything is working fine with the stock rom v.20a EUR_Open.
Has got someone an idea what I can try?
I did every step on it's own to have a look on which point the problem appears - after installing cm 10.1.2 with cwm recovery.
Bootloader is unlocked.
I'm looking forward to your suggestions and please accept my apologies for my bad english.
Kind Regards
FChaos
For nfc, just restart once, that will fix it
Hey,
im having the same issue with wifi.
When i try to activate the switch gets stuck in grey but it does not activate.
I have it since I installed CM 10.1.2 stable. Before everything worked just fine.
Any solutions for this problem?
Greetz
Wipe cache & dalvik cache
Fix permissions
Reboot
If that doesn't work then full wipe and reflash.
Note: WEP encryption will not work with CM v10.x so make sure you are using WPA on your wireless networks.
I already tried everything you mentioned, but nothing works for me.
WEP is not the problem, because I can't even get to the point to select my router. Also I'm using WPA2 at home.
eliarno said:
I already tried everything you mentioned, but nothing works for me.
WEP is not the problem, because I can't even get to the point to select my router. Also I'm using WPA2 at home.
Click to expand...
Click to collapse
I presume the CM build you refer to is a nightly? Try a different one or CM stable - nightlies are a beta software and may have random bugs.
The problem occurs since I installed the CM 10.1.2 stable.
After that I also tried some of the new CM 10.2 nightlies, but the problem still exists.
Any other ideas?
Edit:
When I install Android 4.1.2 Stock everything works just fine, but the moment I install CM wifi does not work anymore.
I installed lyriquidperfection's stock pre-rooted ROM (here: http://forum.xda-developers.com/showthread.php?t=1942150), everything seems to work ok so far except for Wi-Fi.
The phone will not connect to my home network, telling me the password is incorrect and displaying 'authentication error'. WPA2 password is definitely correct.
Can anyone suggest what might be the problem?
I'm also getting a new symbol in the right hand side of the notification bar, it is a big N with what looks like a wifi signal next to it.. what does that mean?
DanPower123 said:
I installed lyriquidperfection's stock pre-rooted ROM (here: http://forum.xda-developers.com/showthread.php?t=1942150), everything seems to work ok so far except for Wi-Fi.
The phone will not connect to my home network, telling me the password is incorrect and displaying 'authentication error'. WPA2 password is definitely correct.
Can anyone suggest what might be the problem?
Click to expand...
Click to collapse
I hope you didn't do this... you flashed a I9305 firmware on a I9300 device? Or you just asked on the wrong Q&A section? There's a separate Q&A section for the I9305 device so...
SignetSphere said:
I hope you didn't do this... you flashed a I9305 firmware on a I9300 device? Or you just asked on the wrong Q&A section? There's a separate Q&A section for the I9305 device so...
Click to expand...
Click to collapse
Oh right, it appears I've posted in the wrong section. I definitely have an i9305.
Like I said almost everything seems to be working fine (in fact other than the boot screen I noticed almost no difference after flashing) except for Wi-Fi.
But I have also noticed one more issue, the phone will not connect to my PC in "Media Player" mode. It connects fine in "camera" mode. My old phone (galaxy W) used to connect fine in all modes and I have transferred files to this phone in Media Player mode before flashing this ROM...
Anyways most important issue is getting Wi-Fi to work.. any ideas?
I have no idea since I don't own a I9305 device. I'll just report this post to be moved to the I9305 Q&A section and from there maybe you'll get a solution to your problem.
DanPower123 said:
Oh right, it appears I've posted in the wrong section. I definitely have an i9305.
Like I said almost everything seems to be working fine (in fact other than the boot screen I noticed almost no difference after flashing) except for Wi-Fi.
But I have also noticed one more issue, the phone will not connect to my PC in "Media Player" mode. It connects fine in "camera" mode. My old phone (galaxy W) used to connect fine in all modes and I have transferred files to this phone in Media Player mode before flashing this ROM...
Anyways most important issue is getting Wi-Fi to work.. any ideas?
Click to expand...
Click to collapse
Clear any caches ie Dalvik, system and user.
Then shut down and pull the battery for a min of 20 seconds.
Reset your modem / router if this fails to work try and connect without any security to see if this is an issue.
If all ok reactivate your security and try again.
As for your usb go to settings / advanced settings and make sure usb debugging is enabled.
Reinstall your Samsung drivers on your PC and remove Kies if you have it installed, reboot PC then all should be well. :good:
Final sanction if all else fails reinstall the rom but clear all your data first.
wifi is controlled by the baseband
try different baseband,especially the stock baseband
Aphirodite said:
wifi is controlled by the baseband
try different baseband,especially the stock baseband
Click to expand...
Click to collapse
Simply Wrong please read the faqs and guides .
Wifi is not baseband .
another simple suggestion for you, why not try to set the network into connect without password,you can find out if the phone is ok in connecting with router.
Sent from my GT-I9305
---------- Post added at 04:41 AM ---------- Previous post was at 04:37 AM ----------
you are right,baseband controls the signal only，wifi is by the rom～
:thumbup:
Sent from my GT-I9305
Aphirodite said:
another simple suggestion for you, why not try to set the network into connect without password,you can find out if the phone is ok in connecting with router.
Click to expand...
Click to collapse
Which is what I suggested in my previous post, please read before giving an answer.
I´ve had the same Problem with my S3 LTE and the Speedport router in germany.
There is a setting in the Wlan Menu ( Save energy on Wifi ) you have to disable it. You can also Update your Router to the newest Firmware.
After that it had worked for me
Darkangel142