[Q] is it possible to increase RAM ? - Galaxy Ace S5830i General

is there any way to increase RAM amount for s5830i?

sauron.tdl said:
is there any way to increase RAM amount for s5830i?
Click to expand...
Click to collapse
NO the RAM cannot to increase however the usage of RAM can be decreased...

Swap
Sent from my GT-S5830i using xda app-developers app

You can use swap or compcache. The first one uses SD card space as RAM (obviously, it's much, much slower than the real RAM), compcache uses compression.
Google is your friend.

GermainZ said:
You can use swap or compcache. The first one uses SD card space as RAM (obviously, it's much, much slower than the real RAM), compcache uses compression.
Google is your friend.
Click to expand...
Click to collapse
does swap worth? I mean does it have a remarkable difference?

sauron.tdl said:
does swap worth? I mean does it have a remarkable difference?
Click to expand...
Click to collapse
Instead of having android killing your old apps when RAM is needed, their state will be moved to the SD card.
It will be loaded again in the main RAM (after killing/moving other stuff again) when you need it.
So basically, it's good if your, say, browser keeps closing its tabs as soon as you exit it, but it won't help gaming much.
In fact, it may even cause lag if an application's state is being copied to the SD instead of being killed while gaming (killing it is pretty fast; copying it, not so much, and will cause lag, especially on our low end device).

If you are looking for more memory to install apks, then you should take a look at this:
http://forum.xda-developers.com/showthread.php?t=1716124
Regards

Rasec2002 said:
If you are looking for more memory to install apks, then you should take a look at this:
http://forum.xda-developers.com/showthread.php?t=1716124
Regards
Click to expand...
Click to collapse
He meant to increase RAM and not internal memory....
DON'T USE THAT "CronMod-A2SD/D2EXT/INT2EXT" or you will end up losing your IMEI number if your are unlucky...

GermainZ said:
Instead of having android killing your old apps when RAM is needed, their state will be moved to the SD card.
It will be loaded again in the main RAM (after killing/moving other stuff again) when you need it.
So basically, it's good if your, say, browser keeps closing its tabs as soon as you exit it, but it won't help gaming much.
In fact, it may even cause lag if an application's state is being copied to the SD instead of being killed while gaming (killing it is pretty fast; copying it, not so much, and will cause lag, especially on our low end device).
Click to expand...
Click to collapse
is there any tutorial for doing this method? would you guide me? I have RazoDroiD v2.5 rom on my ace.
and another question, do you recommend MindCr Rom v2.1? I prefer more Space in RAM and stability.

sauron.tdl said:
is there any tutorial for doing this method? would you guide me? I have RazoDroiD v2.5 rom on my ace.
and another question, do you recommend MindCr Rom v2.1? I prefer more Space in RAM and stability.
Click to expand...
Click to collapse
Try this To increase RAM(Requires SD-card partition)...
http://forum.xda-developers.com/showpost.php?p=26220059&postcount=1

sauron.tdl said:
is there any tutorial for doing this method? would you guide me? I have RazoDroiD v2.5 rom on my ace.
and another question, do you recommend MindCr Rom v2.1? I prefer more Space in RAM and stability.
Click to expand...
Click to collapse
I recommned you MindCr Rom v2.3 is great.
Regards.
Enviado desde mi GT-S5830i usando Tapatalk 2

@mario320, I agree with you in 100 per cent. I've S5830i for few days, and tried almost all ROM revisions for this mobile, but MindCr Rom v2.3 is just what I was loking for. I removed some useless apps from ROM, added other ones, and now it fits me perfectly. So with a clear conscience I can recommend MindCr Rom v2.3

Related

O/Cing and Uvolting using KANG BUILD P204-54

Apologies if this post is in the wrong forum. I don't have sufficient posts under my account I can't as yet post under the developer (ROM) thread.
I've just installed the CM7 Kang Build P204-54 on my Optimus 2X.
I notice that the overclocking and undervolting is not available under the Cyanogen, Performance, CPU settings. Basically no values show up under Min and Max frequency.
Is this a limitation on the kernel that has been used in this ROM?
If so what should I do in order to gain this feature. I would like very much to undervolt and overclock the CPU to extend the battery life and get better performance.
Temaseks P204-54 comes with stock kernel which doesn't allow you to OC or UV using CM settings. Therefore you need to install a custom kernel like IronKernel or ETaNa Kernel, which allows you to OC to 1.5 Ghz and 1.4 Ghz respectively.
Also you can't UV using CM settings, you should use a third party app for that like Pimp My CPU, or SetCPU.
Thanks for the info.
I've been looking at the Eterna Kernel. What does the RAM hack value mean?
Also will I lose any data/settings, or should I do a backup before flashing?
Shahmatt said:
Thanks for the info.
I've been looking at the Eterna Kernel. What does the RAM hack value mean?
Also will I lose any data/settings, or should I do a backup before flashing?
Click to expand...
Click to collapse
The different Ram hack values means the amount of extra ram that will be available on your phone. The phone uses the extra ram from the GPU, so that means the bigger the Ramhack, more things don't work. More info can be found in the original thread of course.
Normally, when you flash a kernel you need to wipe cache and dalvik, however ETaNa Kernel will do this automatically for you in its install script, so there's no need for a wipe with this kernel. Therefore you won't lose your data, however making a nandroid backup is never a bad idea.
Vadonkas kernel runs very well. With 32 MB RAM hack almost everything is working but mostly reboot issues. There's also a 32 MB with shared memory but this can have strange behavior. Read the thread, a lot of info.
A little advice...don't set ramhack values...it gives only problems...if you wanna more ram, you can "virtually" add it with compcache in cyanogenmod performance settings
Inviato dal mio SmartPad810C usando Tapatalk
markop90 said:
A little advice...don't set ramhack values...it gives only problems...if you wanna more ram, you can "virtually" add it with compcache in cyanogenmod performance settings
Inviato dal mio SmartPad810C usando Tapatalk
Click to expand...
Click to collapse
Well 32MB Ramhack works fine for me. No problems whatsoever, only reboot doesn't work but that's easily manageable by pressing the power button another time when you want to power up the phone. It's true that with a bigger Ramhack, more things won't work... But besides that it doesn't cause much problems. Obviously it's your choice if you want a big Ramhack.
By the way: there is also a no-Ramhack version of ETaNa Kernel, so you might wanna consider that.
Is the native O2X RAM so low that the phone gets RAM starved? Is the extra RAM a good thing to have?
If not is there any disadvantage is downloading the 0MB RAMhack version and then going with markop90's suggestion of virtually adding extra RAM (if needed) using the CM performance settings?
Shahmatt said:
Is the native O2X RAM so low that the phone gets RAM starved? Is the extra RAM a good thing to have?
If not is there any disadvantage is downloading the 0MB RAMhack version and then going with markop90's suggestion of virtually adding extra RAM (if needed) using the CM performance settings?
Click to expand...
Click to collapse
The O2X has 512 MB Ram, and about 300 MB is available for the apps etc. Most of the time there's only about 100-150 MB free RAM on your phone. In my opinion this is too low, so I chose for a 32MB Ramhack. Now I've always 100+ MB Ram available. So in my case it's a good thing to have.
There are no advantages whatsoever with the 0MB version. Everything works fine and there's no extra ram added.
There are also no disadvantages with enabling compcache I believe, as said before this creates more ram when you need it. (I also have this enabled)
I'm running the 0 ram hack version here and everything is super smooth. I would suggest starting with this one and if you find you are still running low on ram try the 32MB version etc...
Vadonka offer several versions so you can choose whatever you like. Personally I chose the 32mb Ramhack (not shared!). Only reboot doesn't work but to push the ON-button is not really a problem However, for some others the 1x click is too much and they prefer no ramhack.
You can also choose more ramhack if you like, but then it starts to have more issues like no full video resolution etc.
Thanks for the information guys. I will flash the 0MB Eterna kernel during the coming weekend I think. Or maybe tomorrow if I can spare the time.
Btw, would installation of the kernel remove system settings? I mean through the wipe?
The good thing about ETaNa Kernel is that it wipes automatically wipes cache and dalvik everytime you flash it. So, everytime you want to flash a custom kernel you need to wipe cache and dalvik. That means there's no data loss.
I have on my P990-P204-55 CM7 ... how to upgrade to CM7 P204-57
but continuing with my application
I am beginner with android ... 4 days only!
updating my first ... Froyo 2.2 for P204 55 CM7
thank you
lep2011 said:
I have on my P990-P204-55 CM7 ... how to upgrade to CM7 P204-57
but continuing with my application
I am beginner with android ... 4 days only!
updating my first ... Froyo 2.2 for P204 55 CM7
thank you
Click to expand...
Click to collapse
Just flash it. No wipe necessary.
temasek said:
Just flash it. No wipe necessary.
Click to expand...
Click to collapse
@temasek : Could you point me to a page showing the main features of your Kang . I'm on the CWM 204 nightly and was wondering what are the significant featural differences between your Kang and CM7 nightly . Video / screenshots would be great . Can I install you Kang on top of CM 204 nightly ( without deleting data)
Guess I should make this a new thread for noobs like me
vkk178 said:
@temasek : Could you point me to a page showing the main features of your Kang . I'm on the CWM 204 nightly and was wondering what are the significant featural differences between your Kang and CM7 nightly . Video / screenshots would be great . Can I install you Kang on top of CM 204 nightly ( without deleting data)
Guess I should make this a new thread for noobs like me
Click to expand...
Click to collapse
My KANG thread
http://forum.xda-developers.com/showthread.php?t=1421425
Read the 1st three posts in detail.
temasek said:
My KANG thread
http://forum.xda-developers.com/showthread.php?t=1421425
Read the 1st three posts in detail.
Click to expand...
Click to collapse
Those are fine grained details . Looking for broad user level featural changes .I guess I should start a nice little thread . Where users can post screenies and videos and all the goody features about your kang .
temasek said:
Just flash it. No wipe necessary.
Click to expand...
Click to collapse
thankss perfect!!!!!!!
I've flashed Eterna.
I notice SetCPU and Pimp my CPU are paid apps.
Are there any free apps I can use to undervolt?

ICS

So i was waiting for this from a long time ?I installed the ICS stock rom using PC odin.GB was much better than this ICS.My ram use always up to 550MB.Even i clear it,it raise up again automatically.N nothing new with the battery life.What should i do now?
What is your question? Be specific
well my pone's memory it even used more than that and everything is fine it goes to deep sleep and battery as a matter of fact lets say 16 hours so far works great seems your flashing better wipe everything and install clean then install CPUspy right away and start watching it must go to deep sleep without issues so look again.
sabbir2012 said:
So i was waiting for this from a long time ?I installed the ICS stock rom using PC odin.GB was much better than this ICS.My ram use always up to 550MB.Even i clear it,it raise up again automatically.N nothing new with the battery life.What should i do now?
Click to expand...
Click to collapse
Unused memory is wasted memory!
Regards,
Dave
Sent from my GT-N7000 using Tapatalk 2
After seeing the ram issue i reset the factory data.Even i formatted my internal storage.But the ram issue is still the same.I don't have anything installed now except JuiceDefender.
Anyway to reduce the ram use? Or i should try with the N7000ZSLPF rom selecting the boot loader?
sabbir2012 said:
Anyway to reduce the ram use? Or i should try with the N7000ZSLPF rom selecting the boot loader?
Click to expand...
Click to collapse
No need to get panicky about RAM usage at all. Android is meant to work that way:
it keeps your apps cached, so it can start them faster when you need them.
sabbir2012 said:
Anyway to reduce the ram use? Or i should try with the N7000ZSLPF rom selecting the boot loader?
Click to expand...
Click to collapse
When will people realise android is not like WINDOWS or any Microsh$t RAM is meant to be used on our phones to keep multitasking running smoothly etc. If you want to run a large app/game then android will give it then ram it needs and automaticly keep processors from other apps.
Thus there is never much free ram because its being used to make everything nice and smooth.
FREE RAM IS WASTED, personally I hate seeing more than 200MB ram free
OK thank u everyone for reply.But should i try the N7000ZSLPF rom.What's the different between N7000ZSLPF n N7000XXLPY rom?
sabbir2012 said:
OK thank u everyone for reply.But should i try the N7000ZSLPF rom.What's the different between N7000ZSLPF n N7000XXLPY rom?
Click to expand...
Click to collapse
Personally I wouldn't yet, give it a week or so make sure there are no huge bugs, wouldn't want to flash it and then find out that after 2 days use peoples phones randomly start failing to boot...sure its unlikely but I like to wait as I don't really have the cash laying around to buy another £500 phone....
Ok thank u.
sabbir2012 said:
Anyway to reduce the ram use? Or i should try with the N7000ZSLPF rom selecting the boot loader?
Click to expand...
Click to collapse
to increase memory, have you tried using any of those memory optimizers like autokill?
Settings, Developer options, section "Apps"
but my common sense tells me that your phone is going to be a lot slower.

Question regardin RAM and JB!

Hi guys I'm running MiUi.JB.2.8.24 on my SGS1 and my RAM memory is always 75%-80% full even if I don't run any apps....is there a way to free some RAM space in order to make my SGS1 smoother?
Thanks in advance!!!!
Don't know about MIUI, but I use C-RoM BeaN v1.3.4 and I have 278Mb in use and 111 free. The phone is very smooth and the ROM pretty cool.
xXJaSoN21Xx said:
Hi guys I'm running MiUi.JB.2.8.24 on my SGS1 and my RAM memory is always 75%-80% full even if I don't run any apps....is there a way to free some RAM space in order to make my SGS1 smoother?
Thanks in advance!!!!
Click to expand...
Click to collapse
I also using MIUI JN 2.8.24 with seemaphore_JB_2.0.6s is was very smoot and stable. only problem i have is Camera not working for 1st time when you use the apps.
RAM = 376M/512M
but the way what are the kernel you using?
Try devil kernel XL. It solved my problems.

[Q] Increase Internal Memory By ext4 partition For Android 4.2.1 CM10.1 [13.01.2013]

How To Increase Internal Memory By ext4 partition For Android 4.2.1 CM10.1 ?
This Rom is So Smooth, Fast & Nice Looking. i Like this Rom Very Much.
So Can Any One suggest About this..?
http://forum.xda-developers.com/showthread.php?t=1398797
Increase internal memory size
vicnedo said:
http://forum.xda-developers.com/showthread.php?t=1398797
Increase internal memory size
Click to expand...
Click to collapse
Hello vicnedo i m talking about Android 4.2.1 CM10.1 Rom... not GB Rom...
scorpion85 said:
Hello vicnedo i m talking about Android 4.2.1 CM10.1 Rom... not GB Rom...
Click to expand...
Click to collapse
Same method!
First partition the sd card, then use "Link2sd" !
scorpion85 said:
How To Increase Internal Memory By ext4 partition For Android 4.2.1 CM10.1 ?
This Rom is So Smooth, Fast & Nice Looking. i Like this Rom Very Much.
So Can Any One suggest About this..?
Click to expand...
Click to collapse
Partition your SD card and use Link2SD... Works like a charm for me with Android 4.2.1 CM10.1 by WaylandAce...:good:
Use mount2SD on fresh install
side_effect said:
Use mount2SD on fresh install
Click to expand...
Click to collapse
Thank you All
i tried link2sd but Mount2SD is most effective i found..
but how can i move All system apps + data to sd-ext ?
You don't want to. Sd-ext is faster than FAT32, but you still want system apps installed internally for speed. That's why Link2SD won't link system apps; the Cronmod scripts leave the system apps alone too.
Sent from my Galaxy Ace
Click thanks if I helped you
This app works: http://forum.xda-developers.com/showthread.php?t=2098920
Lovetz said:
This app works: http://forum.xda-developers.com/showthread.php?t=2098920
Click to expand...
Click to collapse
this link above does not open
now what to do..?
arindam_mitra1985 said:
Partition your SD card and use Link2SD... Works like a charm for me with Android 4.2.1 CM10.1 by WaylandAce...:good:
Click to expand...
Click to collapse
It gets full at some point... link2sd is working but its not good...
Even i use link2sd and also i clear dalvik and cache at regular intervals ,but still i'm not getting satisfactory internal memory???whereas when i was on Gb i used to get min 100 mb internal memory left ,now hardly 50 mb free left with same apps installed..plzz if u know the soln for this plzz let me know ,boczz i really like this rom.

[Q] Galaxy note n7000 ever Going To Update To Android 4.4(official)

Recently I Learned That Android 4.4 Require Only 512 Ram Than
Why Samsung Is Not Put Galaxy Note N7000 To Android 4.4 Update List ?
:crying::crying::crying::crying:
SHIV9911 said:
Recently I Learned That Android 4.4 Require Only 512 Ram Than
Why Samsung Is Not Put Galaxy Note N7000 To Android 4.4 Update List ?
:crying::crying::crying::crying:
Click to expand...
Click to collapse
Because it is an old device. Also, forget about any further updates from Samsung, it will stay on 4.1.2
Headline on AndroidPolice - today
http://www.androidpolice.com/2014/0...tablets-will-see-kitkat-in-the-coming-months/
Official press release by Samsung
http://www.samsungmobileuspress.com...firms-KitKat-for-U.S.-Smartphones-and-Tablets
Sent via GALAXY NOTE N7000 // KitKat
XxPixX said:
Because it is an old device. Also, forget about any further updates from Samsung, it will stay on 4.1.2
Click to expand...
Click to collapse
And because they want to sell you s4/note3/s5.
They have no business in keeping old devices alive.
Welcome in a corporate world:laugh:
Nope, but, at least for my usage pattern, 4.1.2 is rock stable.
Other than having a higher number, does KK really "give" you anything in the Note1,
that would be worth the hassle of trying to get it to work?
p51d007 said:
Nope, but, at least for my usage pattern, 4.1.2 is rock stable.
Other than having a higher number, does KK really "give" you anything in the Note1,
that would be worth the hassle of trying to get it to work?
Click to expand...
Click to collapse
Obviously you haven't tried 4.4.2 on Note1.
Sent from my GT-N7000 using xda app-developers app
@lukasspro777 Would you like to elaborate on that? Obviously going out of TW will also bring some disadvantages, like the use of the S PEN, and some TW based applications which I quite enjoy: the S Note and the S Planner, just to name a few.
Obviously they can be replaced - however not something everyone is willing to do.
The major thing for me with the stock ROM is the lack of space for installing applications. Nothing is more irritating than receiving a brand new update of your favourite application and when trying to install it and get the "not enough memory" error.
I for one did get annoyed enough to try the SlimBean final stable version, and I did not go back. The ROM is fantastic, and extremely light. I had to install some new applications like the Business Calendar Pro and the matching Business tasks which I learned to enjoy (even though the visual aspect of the S Planner was better in my opinion). I also substituted the S Note with Evernote, Sketchbook mobile express and Papyrus and now it looks like a new phone.
However its not like I gained a new feature with 4.3.1 over what the stock ROM had. But after about 2 years of using it, it was taking too much time to open some applications and the general lag was all over the place. Now its not a Galaxy Note 3, but I am quite happy with this change.
There is a thread on modified pit to increase data partition..
nokiamodeln91 said:
There is a thread on modified pit to increase data partition..
Click to expand...
Click to collapse
I know nokiamodel91, but I don't want to swap my SD card and internal memory. I want to be able to swap my 64gb sd card and not worry that half of my applications will stop working.
I never understood why out of the 16GB internal storage only 1.9GB can be used for applications. I have the internal storage almost empty, as I save everything on the micro sd card and find it very frustrating to have internal storage space but can't use it to install applications.
Johev said:
I know nokiamodel91, but I don't want to swap my SD card and internal memory. I want to be able to swap my 64gb sd card and not worry that half of my applications will stop working.
I never understood why out of the 16GB internal storage only 1.9GB can be used for applications. I have the internal storage almost empty, as I save everything on the micro sd card and find it very frustrating to have internal storage space but can't use it to install applications.
Click to expand...
Click to collapse
Thats what the PIT will do. Increase the data partition to 4 GB..
nokiamodeln91 said:
Thats what the PIT will do. Increase the data partition to 4 GB..
Click to expand...
Click to collapse
Wow if this is true than it would be excellent. I have been asking for something like this for a long time, however the reply that I have received from the developers was that it was not possible.
Could you please link the threat? Is it compatible with all ROMs or just the stock?
Many thanks for that information.
Johev said:
Wow if this is true than it would be excellent. I have been asking for something like this for a long time, however the reply that I have received from the developers was that it was not possible.
Could you please link the threat? Is it compatible with all ROMs or just the stock?
Many thanks for that information.
Click to expand...
Click to collapse
Threat? What threat? Oh this threat
nokiamodeln91 said:
Threat? What threat? Oh this threat
Click to expand...
Click to collapse
Thank you for linking the thread . I just hope that my last post wasn't too threatening, hehe
lukasspro777 said:
Obviously you haven't tried 4.4.2 on Note1.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I tried almost all versions of them already sir, and I think the final verdict was to wait for at least a real stable build coz the nightlies still can't compare to stable JB built cusroms with exception of Themes and appearance of the KitKat of course.
I no longer wait stock rom from SS. I love custom roms that is defference between Android and ios
nigi73 said:
And because they want to sell you s4/note3/s5.
They have no business in keeping old devices alive.
Welcome in a corporate world:laugh:
Click to expand...
Click to collapse
i agree with this :good:

Categories

Resources